Creation of 2 x 100 KVA Sub-stations along with HT/LT network at Battalion HQ Molu and Hamirpur Kona under deposit contribution works falling under the jurisdiction of Sub Division Janipur on turnkey basis

Amount

Creation of 2x100 KVA Sub Station (1x100 KVA Sub Station at Battalion HQ Molu) + 1x100 KVA Sub Station at Hamirpur Kona ) Providing/Supplying, Erection/Installation, Testing & commissioning comp Job)

11/0.433 KV, 3 Phase 100 KVA Distribution Transformer with Bi-Mettalic Terminal Connectors (Energy Level-2) Aluminium wound with externally fitted MCCB with cable box and 4x4 mtrs. Suitable cable of ratings

Gapless Surge Arrester, 9 KV, 10 KA, LA with Polymer housing Station Type

11 KV GO, AB Switch 3 Phase, 3 Pole, 200 amp, vertical type

11 KV Horn Gap Fuse Set 3 Phase, 200 amp

185 mm² Single core cable, 1.1KV Grade, PVC insulated stranded conductor FRLS type

ST Poles 9 Mtr Long (ST -410 SP 33)

11 KV Polymeric Composite Disc Insulators 12KV, min following load 45 KN, Lightening impulse 75KV positive and 80KV negative, creepage distance 320mm with Fittings

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts & Bolts

Earthing of Sub-Station -Excavation of earth pitof diameter 650mm and deapth 3000mm, installation of earthing pipe of 40mm nominal bore and 4mm wall thickness and length 2.5m long as per IS 1239 GI Strip for neutral earthing of size 25mm into 3 mmfor connection of transformer body, GO Set and lightening arrestor as per IS 2629/85, GI Nuts & Bolts, refilled with earth enhancement material

11 KV Polymeric composite Pin Insulators 12KV, 5KN,lighting inpulse 75KV positive and 80KV negative, creepage distance 320mm

Galvanized Stay Set with 50X8mm Stay clamp, Guy insulator (2 Nos), anchor plate (200X200X6mm) Nuts & Bolts, 2 nos turn buckles,1.8mm long, 16mm diameter solid GS stay rod and 7/3.15mm dia GI standard wire complete

Wedge Connectors/ PG Calmps

Danger Plates with Clamps

GI Barbed wire for Anti Climbing

Cement Bottoming 1:2:4 mix as per REC Standards 0.5cum/pole

Painting of Poles Red-Oxide

Painting of Poles Aluminium Paint

Prodigy Meter

Sundry items like Aluminium Lugs, Jumpers, Binding Tape Aluminium Thimbles etc.

Laying of 0.30Km 11 KV line on PCC Poles 9.0 Mtr long using ACSR Weasel for Creation of 1x100 KVA Sub Stn. At Battalion HQ Molu ( Providing/Supplying, Erection/Installation, Testing & commissioning comp Job)

PCC Poles 9 Mtr Long (WL: 300 Kg)

GI Channel X-arm including clamp and braces

ACSR Weasel Conductor(30 mm²)

PG clamps for 30 mm2 ACSR conductor

11 KV Polymer composite Pin Insulators 12KV,5KN, Lighting impulse 75KV positive and 80KV negative, creepage distance 320mm

11 KV Polymer composite Disc Insulator 12KV,min falling load 45KN, Lighting impulse 75KV positive and 80KV negative, creepage distance 320mm

Galvanized nuts & Bolts

Danger Plates with Clamps

Anti Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20 mm 2.5 mtr long through GI Strip

Stone Pad

Aluminium Jointing sleeves

Galvanized Stay Set with 50X8mm Stay clamp, Guy insulator (2 Nos), anchor plate (200X200X6mm) Nuts & Bolts, 2 nos turn buckles,1.8mm long, 16mm diameter solid GS stay rod and 7/3.15mm dia GI standard wire complete

Laying of 0.30Km 11 KV line on PCC Poles 9.0 Mtr long using ACSR Weasel for Creation of 1x100 KVA Sub Stn. At Hamirpur Kona ( Providing/Supplying, Erection/Installation, Testing & commissioning comp Job)

PCC Poles 9 Mtr Long (WL: 300 Kg)

GI Channel X-arm including clamp and braces

ACSR Weasel Conductor(30 mm²)

PG clamps for 30 mm2 ACSR conductor

11 KV Polymer composite Pin Insulators 12KV,5KN, Lighting impulse 75KV positive and 80KV negative, creepage distance 320mm

11 KV Polymer composite Disc Insulator 12KV,min falling load 45KN, Lighting impulse 75KV positive and 80KV negative, creepage distance 320mm

Galvanized nuts & Bolts

Danger Plates with Clamps

Anti Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20 mm 2.5 mtr long through GI Strip

Stone Pad

Aluminium Jointing sleeves

Galvanized Stay Set with 50X8mm Stay clamp, Guy insulator (2 Nos), anchor plate (200X200X6mm) Nuts & Bolts, 2 nos turn buckles,1.8mm long, 16mm diameter solid GS stay rod and 7/3.15mm dia GI standard wire complete

Laying of 0.25 KM LT line on 4 Pole structure 11 Mtr. ST Poles using 120 mm2 XLPE Cable with provision of spare cable at Hamirpur Kona (Supplying, Installation, Testing & commissioning comp Job)

ST Poles 11 Mtr Long (ST-410 SP 56)

120 mm2 3.5 core (LT) Cable 1.1 KV Grade, Armoured, XLPE insulated Stranded conductor FRLS type (2x250 Mtr.)

SWR 16 mm as support wire for river crossing

GI channel cross-arm, braces, belts, clamps, hooks etc.

Cable Pulley wheel

D- clamps complete

Cable Termination Kit outdoor type

Galvanized nuts & Bolts

Danger Plates

Anti Climbing Devices with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20 mm 2.5 mtr long through GI Strip

Cement Bottoming 1:2:4 mix as per REC standards .45 cum/pole

Red oxide

Aluminium Paint

PG clamps

Galvanized Stay Set with 50X8mm Stay clamp, Guy insulator (2 Nos), anchor plate (200X200X6mm) Nuts & Bolts, 2 nos turn buckles,1.8mm long, 16mm diameter solid GS stay rod and 7/3.15mm dia GI standard wire complete

Laying of 0.20 KM LT line on PCC Poles 8.0 Mtr long using 120mm2 AB Cable for dispersal of power from newly created 1x100 KVA Sub station at Battalion HQ Molu ( Providing/Supplying, Erection/Installation, Testing & commissioning comp Job)

PCC Poles 8 Mtr Long (WL: 200 Kg)

120 mm2 AB (LT) Cable (3x120+1x16+70 mm2) XLPE (1.1kv, 3+1 C, Al)

Suspension/Tension Clamp with eye hook

Galvanized nuts & Bolts

Danger Plates

Anti Climbing Devices with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20 mm 2.5 mtr long through GI Strip

Stone pad

Insulating Piercing Connectors

PG clamps

Galvanized Stay Set with 50X8mm Stay clamp, Guy insulator (2 Nos), anchor plate (200X200X6mm) Nuts & Bolts, 2 nos turn buckles,1.8mm long, 16mm diameter solid GS stay rod and 7/3.15mm dia GI standard wire complete

Laying of 1.7 KM LT line on ST Poles 8.0 Mtr long using 50mm2 AB Cable for dispersal of power from newly created 1x100 KVA Sub station at Hamirpur Kona ( Providing/Supplying, Erection/Installation, Testing & commissioning comp Job)

ST Poles 8 Mtr Long (ST-410 SP 15)

120 mm2 AB (LT) Cable (3x120+1x16+70 mm2) XLPE (1.1kv, 3+1 C, Al)

Suspension/Tension Clamp with eye hook

Straight Through Cable jointing kit

Galvanized nuts & Bolts

Danger Plates

Anti Climbing Devices with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20 mm 2.5 mtr long through GI Strip

Cement Bottoming 1:2:4 mix as per REC standards .45 cum/pole

Red oxide

Aluminium Paint

Insulating Piercing Connectors

PG clamps

Galvanized Stay Set with 50X8mm Stay clamp, Guy insulator (2 Nos), anchor plate (200X200X6mm) Nuts & Bolts, 2 nos turn buckles,1.8mm long, 16mm diameter solid GS stay rod and 7/3.15mm dia GI standard wire complete

The Trikuta Engineer (BID ID -2322815)

Madina Electrical Works (BID ID -2328542)

Raina Builders and Suppliers (BID ID -2328418)

M/S APR CONSTRUCTIONS (BID ID -2328280)