8873/E8

Amount

Taking out copper/aluminium point wiring cable from existing concealed conduit point wiring (light, fan, socket or power) complete, including fixture such as switches, ceiling roses, pendants, regulators, sockets, etc. removing materials from site and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. (Note:- Disturbed surfaces of wall shall be make good by applying two coats of OBD over a coat of wall care putty over cement mortar plaster (1:3) where necessary to match with existing surface finish)

M&L point wiring with 1.5 Sqmm (nominal area), PVC insulated, stranded single core unsheathed FR copper conductor cable 1100 Volts grade drawn through with and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core HRFR / FRLS copper cable as earth continuity wire connecting to common earth point including supply & fixing of 1.6 mm thick pressed mild steel terminal boxes of suitable size with 3 mm thick PVC / Plastic laminated sheet. top cover, suitable sizes of brass screws and washers etc. for mounting switches, sockets, regulators etc complete for one light point / ceiling fan point / exhaust fan point / call bell point controlled by one way switches complete all as specified and directed.

All as per item no.02 above but for one light point controlled by two way switch.

All as per item no.02 above but for one three pin 5 Amp socket outlet on same board.

All as per item no.02 above but for one three pin 5 Amp socket outlet on independent board.

M&L point wiring with 2.5 Sqmm (nominal area), PVC insulated, stranded single core unsheathed FR copper conductor cable 1100 Volts grade drawn through with and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 2.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core HRFR / FRLS copper cable as earth continuity wire connecting to common earth point including supply & fixing of 1.6 mm thick pressed mild steel terminal boxes of suitable size with 3 mm thick PVC / Plastic laminated sheet. top cover, suitable sizes of brass screws and washers etc. for mounting switches, sockets, regulators etc complete for 3 pin socket outlet 15 Amps on independant board complete all as specified and directed. Note: Wiring wire color code i.e. Red/ Yellow /Blue for Phase, black for neutral and Green for earth shall be maintained.

S & F switch piano, flush type, 5/6 Amps, 240 Volts, single pole, one way, conforming to IS complete all as specified and as directed.

M & L Ceiling rose, surface type polycarbonate/ PVC three terminals, conforming to IS, complete all as specified and as directed.

S & F Switch socket combination 5 Pin, 16/6 Amps, flush type, multipurpose, conforming to IS complete all as specified and as directed.

S & F Switch socket combination 5 Pin, 6 Amps, 240 Volts, flush type multi-purpose, conforming to IS complete all as specified and as directed.

S&F socket outlet 3/5 pin 5 Amps flush modular type complete all as specified and as directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and as directed.

M&L call bell ding dong single pole complete all as specified and as directed.

S&F bell push flush type, 5 Amps 230 Volts complete all as specified and as directed.

M&L Sub main wiring with two runs of 6.0 sqmm (Nominal area) single core PVC insulated stranded unsheathed FRLS copper conductor cable upto and including 1100 V grade drawn through and including rigid PVC non mettalic surface conduit medium duty with conduit accesseries such as junction boxes, bends, tees etc. complete including one run of 4.0 sqmm (nominal area) single core, PVC insulated stranded unsheathed FRLS copper conductor as earth wire and duly connected to common earth point complete all as specified and directed including taking down old one. (Note :-(i) Two runs of 6.0 sqmm single core cable, one run of 4.0 sqmm earth continuity wire to be measured as one length). (ii) Chase cutting for replacement of defective/ unserviceable concealing conduit by new conduit if ordered, shall be measured & Paid separately under respective item in this schedule. (iii)Conduit shall be measured and paid seperately .

M&L Sub main wiring with two runs of 4.0 sqmm (Nominal area) single core PVC insulated stranded unsheathed FR copper conductor cable upto and including 1100 V grade drawn through and including rigid PVC non mettalic surface conduit medium duty with conduit accesseries such as junction boxes, bends, tees etc. complete including one run of 2.5 sqmm (nominal area) single core, PVC insulated stranded unsheathed FRLS copper conductor as earth wire and duly connected to common earth point complete all as specified and directed including taking down old one. (Note :-(i) Two runs of 4.0 sqmm single core cable, one run of 2.5 sqmm earth continuity wire to be measured as one length). (ii) Chase cutting for replacement of defective/ unserviceable concealing conduit by new conduit if ordered, shall be measured & Paid separately under respective item in this schedule. (iii)Conduit shall be measured and paid seperately .

M&L Sub main wiring with two runs of 10.0 sqmm (Nominal area) single core PVC insulated stranded unsheathed FR copper conductor cable upto and including 1100 V grade drawn through and including rigid PVC non mettalic surface conduit medium duty with conduit accesseries such as junction boxes, bends, tees etc. complete including one run of 6.0 sqmm (nominal area) single core, PVC insulated stranded unsheathed FRLS copper conductor as earth wire and duly connected to common earth point complete all as specified and directed including taking down old one. (Note :-(i) Two runs of 10.0 sqmm single core cable, one run of 6.0 sqmm earth continuity wire to be measured as one length). (ii) Chase cutting for replacement of defective/ unserviceable concealing conduit by new conduit if ordered, shall be measured & Paid separately under respective item in this schedule. (iii)Conduit shall be measured and paid seperately .

M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps cills, sunshades, shelves, lintels etc. in brick walls and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth complete all as specified & directed. (Note:- Disturbed surfaces of wall shall be make good by applying two coats of OBD over a coat of wall care putty over cement mortar plaster (1:3) where necessary to match with existing surface finish).

Supply & fixing 20 mm dia medium grade PVC rigid conduit with all fittings and accessories of PVC RIGID CONDUIT (like Tee, bend etc.) complete all as specified and directed.

S & F for 1x20 watt LED tube light with batten fitting and fixture including driver and all accesorries connecting with PVC insulated three core flexible 1.5 sqmm copper conductor cable with earthing complete all as specified and directed including taking down old one. (Make: CG cat no. LCTLN-20-CDL or equivalent in Bajaj/Havells)

S & F for 1x10 watt LED tube light with batten fitting and fixture including driver and all accesorries connecting with PVC insulated three core flexible 1.5 sqmm copper conductor cable with earthing complete all as specified and directed including taking down old one. (Make: CG cat no. LCTLN-10-CDL or equivalent in Bajaj/Havells)

S & F for surface mounted indoor decorative 1x1 LED luminaire , 18 watt suitable for gypsum ceiling complete and connecting with PVC insulated three core flexible 1.5 sqmm copper conductor cable from ceiling to rose complete all as specified and directed including taking down old one. (Make: CG cat no. LCTLSNE-18-FO-CDL or equivalent in Bajaj/Havells)

Supply and fix sheet steel enclosure SPN DBs, 8 way, double door for MCBs with 200 Amps rated bus bar complete all as specified and directed including taking down old one. ( Make Legrand cat No 5076 11 or equivalent equiv in Schneider /GE)

Supply and fix sheet steel enclosure SPN DBs, 4 way, double door for MCBs with 200 Amps rated bus bar complete all as specified and directed including taking down old one. ( Make Legrand cat No 5076 10 or equivalent equiv in Schneider /GE)

Supply and fix MCB SP 240V, 6-32 Amps capacity including taking down old one complete all as specified and directed. (Make : Legrand cat No 4085 87-95 or equivalent in Schneider/GE )

Supply and fix MCB SPN 240V, 63 Amps capacity including taking down old one complete all as specified and directed. (Make : Legrand cat No 4086 20 or equivalent in Schneider/GE )

Supply and fix MCB SPN 240V, 32 Amps capacity including taking down old one complete all as specified and directed. (Make : Legrand cat No 4086 17 or equivalent in Schneider/GE )

Supply and fix MCB SPN 240V, 40 Amps capacity including taking down old one complete all as specified and directed. (Make : Legrand cat No 4086 18 or equivalent in Schneider/GE )

S&F MCCB 63 Amps, 4 Pole,16 KA breaking capacity, 415V fixed magnetic setting Type - DPX 160 including taking out old one complete all as specified and directed.(Cat -4200 13 of Make- Legrand or L&T/Schneider)

S&F MCCB 100 Amps, 36 KA, 4 Pole,415V thermal magnetic release including taking out old one complete all as specified and directed. Type - DPX³ 250, (Cat - 4202 45 of Make- Legrand or Schneider / Siemens / L&T)

S&F MCCB 320 Amps, 36 KA, 4 Pole,415V thermal magnetic release including taking out old one complete all as specified and directed. Type - DPX³ 630, (Cat - 4220 06 of Make- Legrand or Schneider / Siemens / L&T)

S&F MCCB 400 Amps, 36 KA, 3 Pole,415V thermal magnetic release including taking out old one complete all as specified and directed. Type - DPX³ 630, (Cat - 4220 02 of Make- Legrand or Schneider / Siemens / L&T)

M & L for dismantling burnt winding of ceiling fan (any size/ sweep/make) and taking out existing winding wire, and rewinding the same after proper cleaning with super enamelled copper winding wire as per existing gauge and turn to achieve the required RPM, cleaning/ replacement of bearings, bushes capacitor etc as required and testing complete for fan of old model requirement of super enamelled winding wire n.exc. 500 grms complete all as specified and directed.

M & L for dismantling of burnt motor of exhaust fan and taking out existing winding and rewinding the same with super enamelled bare insulated copper winding wire as per existing gauge and turn to achieve required RPM including replacement of unserviceable parts as required and testing complete all as directed of size 225 mm to 350 mm sweep. complete all as specified and directed.

Taking down repairable exhaust fan of any size/sweep from existing position including taking down old connections wire complete all as directed and keep in safe custody for repairs and refixing the same on the same / different location with provision of new flexiable wire including cleaning of external surfaces & servicing the fan by dismantling complete greasing oiling and replacement of unserviceable parts as complete all as specified & directed ( Note :- Any parts needed to be replaced for satisfactorily running of exhaust fan shall be measured and paid separately under appropriate items.)

Supply only capacitor of capacity 2.5 mfd 230 volt suitable for exhaust fan of any make / model and sweep .

Supply only Ball bearing No. 6201 suitable for exhaust fan of any sweep.

Taking down repairable ceiling fan of any size/sweep from existing position including taking down old connections wire complete all as directed and keep in safe custody for repairs and refixing the same on the same / different location with provision of new flexiable wire including cleaning of external surfaces & servicing the fan by dismantling complete greasing oiling and replacement of unserviceable parts as complete all as specified & directed (Note :- Any parts needed to be replaced for satisfactorily running of exhaust fan shall be measured and paid separately under appropriate items).

Supply only capacitor of capacity 2.5 mfd 230 volt suitable for ceiling fan of any make / model and sweep .

Supply only Ball bearing No. 6201 suitable for ceiling fan of any sweep. (Make- TATA/SKF or equivalent)

Supply only Ball bearing No. 6202/6203 suitable for ceiling fan of any sweep.(Make- TATA/SKF or equivalent)

Supply only MS split pin size 2''x1/8'' for ceiling fan of any sweep.

Supply only rubber bush of size1,1/2" dia x 1'' thick for ceiling fan of any sweep.

Supply only capacitor of capacity 4.0 mfd 230 volt suitable for ceiling fan of any make / model and sweep .

M&L for painting to ceiling fan of any sweep complete with one coat of synthetic enamel paint by spraying including filling cavities with fillar with necessary preparation of surface including hanging the ceiling fan and connecting up complete all as directed.

M&L for painting to exhaust fan of any sweep complete with synthetic enamel paint by spraying including filling cavities with fillar including necessary preparation of surface including refixing the same at site complete all as directed.

S & F modular switch 6 Amps, 240 Volts, single pole, one way, single module conforming to IS complete all as specified and as directed.(Make-Legrand 6730 00 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S & F modular switch 16 Amps, 240 Volts, single pole, one way, single module conforming to IS complete all as specified and as directed.(Make-Legrand 6730 08 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S & F modular socket 6/16 Amps, 2/3 pin, 240 Volts, two modules conforming to IS complete all as specified and as directed.(Make-Legrand 6730 45 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S & F modular socket 6 Amps, 2/3 pin, 240 Volts, two modules conforming to IS complete all as specified and as directed.(Make-Legrand 6730 44 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S & F modular bell push 6 Amps, 240 Volts, single pole, single module conforming to IS complete all as specified and as directed.(Make-Legrand 6730 20 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S & F modular fan regulator step type 100 w, 240 Volts, single pole, two module conforming to IS complete all as specified and as directed.(Make-Legrand 6730 29 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F white cover plate with frame for Modular switch, 2 module complete all as specified and as directed. (Make-Legrand 6732 02 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F white cover plate with frame for Modular switch, 3 module complete all as specified and as directed. (Make-Legrand 6732 03 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F white cover plate with frame for Modular switch, 6 module complete all as specified and as directed. (Make-Legrand 6732 06 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F white cover plate with frame for Modular switch, 8 module complete all as specified and as directed. (Make-Legrand 6732 08 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

Supply only Modular metal flush box, 2 module complete all as specified and as directed. (Make-Legrand 6890 07 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

Supply only Modular metal flush box, 3 module complete all as specified and as directed. (Make-Legrand 6890 08 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

Supply only Modular metal flush box, 6 module complete all as specified and as directed. (Make-Legrand 6890 10 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

Supply only Modular metal flush box, 8 module complete all as specified and as directed. (Make-Legrand 6890 42 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F white blanking plate one module complete all as specified and directed.(Make-Legrand 6730 61 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F flush type 6 module Power unit consisting of one SPN MCB 20A, one single phase motor starter for over load protection, one heavy duty plug top with indicator & one 3 pin 25A socket assembly complete all as specified and as directed. (Make : Northwest Cat No ACPU6M-FT or equivalent).

S & F metal box 6 Module for mounting power unit complete all as specified and as directed. Make : Northwest Cat No MB06M20GGI or equivalent.

S & F metal box 2 Module for mounting power unit complete all as specified and as directed. Make : Northwest Cat No MB01M20GGI or equivalent.

M&L for single phase starters current rating 16-25 Amps suitable for 2.0 Ton AC complete all as specified and as directed including taking out old one. Make : North West, Cat No. C 12M01 J or equiv. of Havells / L&T)

S&F white cover plate with frame for Modular switch, 2 module complete all as specified and as directed. (Make : North West, Cat No. CS922MPLUS or equiv. of Havells / L&T)

S & F modular socket 6/16 Amps, 2/3 pin, 240 Volts, two modules conforming to IS complete all as specified and as directed.(Make : North West, Cat No. M1352PLUS or equiv. of Havells / L&T)

Supply and fixing in repairs single phase KWh meter with LCD display, 1P LCD meter 5-30A with box, including connection wire and grouting of nut, bolts, complete all as specified and directed. (Make- L&T model no EM 101+ class 1 base mounting Cat No WM101BC5DL0BOX or equivalent in C&S/HPL/ABB)(Note-Old u/s meter shall be h/o to MES department)

S & F switch piano, flush type, 5/6 Amps, 240 Volts, single pole, one way, conforming to IS complete all as specified and as directed including taking down old one.

M & L Ceiling rose, surface type polycarbonate/ PVC three terminals, conforming to IS, complete all as specified and as directed including taking down old one.

S & F Switch socket combination 6 Pin, 16/6 Amps, flush type, multipurpose, conforming to IS complete all as specified and as directed including taking down old one.

S & F Switch socket combination 5 Pin, 6 Amps, 240 Volts, flush type multi-purpose, conforming to IS complete all as specified and as directed including taking down old one.

S&F socket outlet 3/5 pin 5 Amps flush type complete all as specified and as directed including taking down old one.

S&F bell push flush type, 5 Amps 230 Volts complete all as specified and as directed including taking down old one.

M&L bell AC 230 Volts single pole complete all as specified and as directed including taking down old one.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and as directed including taking down old one.

S & F modular switch 6 Amps, 240 Volts, single pole, one way, single module conforming to IS complete all as specified and as directed including taking down old one .(Make-Legrand 6730 00 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S & F modular switch 16 Amps, 240 Volts, single pole, one way, single module conforming to IS complete all as specified and as directed including taking down old one.(Make-Legrand 6730 08 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S & F modular socket 6/16 Amps, 2/3 pin, 240 Volts, two modules conforming to IS complete all as specified and as directed including taking down old one.(Make-Legrand 6730 45 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S & F modular socket 6 Amps, 2/3 pin, 240 Volts, two modules conforming to IS complete all as specified and as directed including taking down old one.(Make-Legrand 6730 44 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S & F modular bell push 6 Amps, 240 Volts, single pole, single module conforming to IS complete all as specified and as directed including taking down old one.(Make-Legrand 6730 20 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S & F modular fan regulator step type 100 w, 240 Volts, single pole, two module conforming to IS complete all as specified and as directed including taking down old one.(Make-Legrand 6730 29 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F heating element 1000-2000W, ISI marked for geyser of any make including connection including taking down old one complete all as specified and directed.

S&F Thermostat switch of geyser 230 volts, 30 degree to 90 degree centrigate temp. Range including taking down old one complete all as specified and directed.

S&F indicating lamp set for geyser of any make including taking down old one complete all as specified and directed.

S&F connection pipe set for geyser of best quality of suitable size including taking down old one complete all as specified and directed.

S& F Air release valve 15 mm dia for geyser including taking down old one complete all as specified and directed.

S & F fusible plug of brass 15 mm bore suitable for any type geyser including taking down old one complete all as specified and directed.

S & F drain plug for wash out line made of brass suitable for any type geyser including taking down old one complete all as specified and directed.

M&L for painting to geyser upto 25ltr capacity of any shape with one coat synthetic enamel paint by spraying including filling cavities with filler, two coat after cleaning all dust etc. complete all as directed.

Taking down geysers and scraping, cleaning including brazing of inner vessel of the geyser at leakage point to make it leake proof including testing pressure and assembling after unserviceable components and refixing at position complete all as specified and directed for geysers upto 25 Ltrs capacity complete all as specified and directed.

S&F copper inner shell of electric geyser of cap 25 ltr 2 mm thick sheet complete including taking down old unserviceable all as specified and as directed .

S&Charging R-134A refrigerant gas complete all as specified and as directed.

S&charging R-22/R-410A refrigerant gas complete all as specified and as directed.

S&F Hermeatically sealed unit of compressor for 1.5 Ton AC including charging of gas R-134A complete including taking down old unserviceable all as specified and as directed. Make - Tecumseh/ danfoss/Mitsubishi

S&F Hermeatically sealed unit of compressor for 2.0 Ton AC including charging of gas R-134A complete including taking down old unserviceable all as specified and as directed Make - Tecumseh/ danfoss/Mitsubishi

Supply only Remote for Split/window Type AC as ordered model complete all as specified and directed.

S&F Electronic circuit board as existing type for split type AC 1.5 Ton capaciy complete including taking down old one all as specified and as directed .

S&F display board as existing type for split / window type AC 1.5 / 2.0 Ton capaciy complete including taking down old one all as specified and as directed.

S&F capacitor combined type 50 mfd for split / window type AC 1.5 / 2.0 Ton capaciy complete including taking down old one all as specified and as directed.

S&F running capacitor for split / window type AC 1.5 / 2.0 Ton capaciy complete including taking down old one all as specified and as directed.

S&F starting capacitor for split / window type AC 1.5 / 2.0 Ton capaciy complete including taking down old one all as specified and as directed.

S&F capilary tube copper for split / window type AC 1.5 / 2.0 Ton capaciy complete including taking down old one all as specified and as directed.

S&F electrical terminal for outer unit PVC/polycabonate complete including taking down old one all as specified and as directed.

S&F blower fan motor for indoor unit split / window type AC 1.5 / 2.0 Ton capaciy as per existing type complete including taking down old one all as specified and as directed.

S&F outer fan motor for outdoor unit split / window type AC 1.5 / 2.0 Ton capaciy as per existing type complete including taking down old one all as specified and as directed.

S&F swing motor for indoor unit split / window type AC 1.5 / 2.0 Ton capaciy complete including taking down old one all as specified and as directed.

S&F 3 core copper cable 4.0 sqmm for connection outer to inner unit of split type AC complete including taking down old one all as specified and as directed.

S&F copper tube 3/8''size thickness 0.7 mm for connection outer to inner unit 1.5 / 2.0 TR capacity split type AC complete including taking down old one all as specified and as directed.

S&F copper tube 5/8''size thickness 0.7 mm for connection outer to inner unit 1.5 / 2.0 TR capacity split type AC complete including taking down old one all as specified and as directed.

S&F insulation cover for thermally insulated copper tube for 1.5 / 2.0 TR capacity split type AC complete including taking down old one all as specified and as directed.

S&F fliring valve inlet / oulet with nut bolts and necessary item for 1.5 / 2.0 TR capacity split type AC complete including taking down old one all as specified and as directed.

S&F PVC pipe for condensing water of size 20 mm dia complete including taking down old one all as specified and as directed.

S&F fan blade existing type for split / window type AC including taking down old one all as specified and as directed.

M & L earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with the top edge of earth plate at depth not less than 1.5m below ground level connected with 4mm dia GI wire by means of bolts washers and protected by 15mm bore, medium grade GI pipe, funnel with 20mm bore GI medium grade watering pipe, wire mesh, copper lugs including concrete pit in PCC 1:3:6 type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350X350X50 mm, reinforced with 8mm dia deformed bars @15 cm C/C both direction and 10mm MS handle of suitable size, charcoal or coke and salt in alternate layers, necessary earth work in soft/loose soil, all as shown in Electrical Plate No 3 of MES Schedule Part-I and testing, complete all as specified and as directed.

S&F Plug top with indicator 16 A, including taking down old one complete including taking down old one all as specified and directed. Make : - North West or equivalent in Schneider/GE / Legrand

S&F Onload Changeover switch cubical type I-O-II for 100 Amps, 4 POLE, Manual changeover, Open execution including taking down old one all as specified and as directed. (Cat - CO11000OOOD of Make -L&T or equiv in Legrand/C&S/GE).

S&F Electronic circuit board as existing type for split type AC 2 Ton capaciy complete including taking down old one all as specified and as directed .

S& F aparture plate for geyser including taking down old one complete all as specified and directed.

UNITED ENGINEERS

ARJUN DAS VALECHA

Somani Builders

SHEIKH ENTERPRISE

SINHA ENTERPRISE

PRABIR TRADERS

DEB AND COMPANY