COMPREHENSIVE DAY TO DAY MAINTENANCE FOR PLUMBING / SANITARY ITEM / JOINERY ON DAILY BASIS UNDER AOR OF GE (AF) SRINAGAR AND REPAIR TO LEAKAGE, SEEPAGE, OVERHEAD TANKS, ROOFING, FALSE CEILING AND OTHER MISC WORKS OMQ, OFFICERS MESS AND MES COMPLEX AT

Amount

Attending complaints related to plumbing / water supply and obtaining completion from user for minor repair such as replacement of washers, tightening of taps, tightening of check nuts / unions / sockets / PVC connection etc and making water supply functional in case of blockage, taking down & refixing of GI pipe joints, application of white cement where required, complete all as specified and directed by Engineer in Charge.

S&F in repair inter kit for PVC low level flusing cistern, complete all as specified and directed by Engineer in Charge.

S&F in repair, 15 mm size PTMT bib tap standard type of any colour, high pressure screwed for iron pipe complete all as specified and directed by Engineer in Charge.

S&F in repair, 15 mm size PTMT Angle valve standard type of any colour, high pressure screwed for iron pipe complete all as specified and directed by Engineer in Charge.

S&F in repair, 32 mm size brass chromium plated waste coupling (half or full threaded) for sink / wash hand basin complete all as specified and directed by Engineer in Charge.

S&F in repair 32 mm size & 750 mm long PVC waste pipe flexible type for WHB / sink complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, 100 mm dia stainles steel chromium plated grating, fixed in position with white cement Complete.

S&F in repairs, 125 mm dia stainles steel chromium plated grating, fixed in position with white cement Complete.

S&F in repair , 15 mm size Flexible chromium plated hose pipe with CP brass nut of length 1 m to 1.2 m suitable for Health faucet & hand shower Complete all as specified and directed by Engineer-in-Charge.

S&F in repair ABS plastic chromium plated Health faucet fixed with spring action and lever along with Flexible hose with brass nut of length 1 m to 1.2 m fitted in the existing water connection in the toilets, Complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass chromium plated Jet Spray of Standard size for EWC alongwith CP connection and all fittings as fixed, complete all as specified and directed by Engineer-in-Charge.

S&F in reapir Toilet paper holder cast copper alloy chromium plated fixed to walls with chromium plated brass screws, complete all as specified and as direted by the Engr-in-Charge

S&F in repair Tubular towel rail stainless steel chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Stainless steel soap dish fixed to wall with plug and screw, complete all as specified and directed by Engineer-in-charge

S&F in reapir PVC seat cover for EWC colour white including hinges, complete all as specified and as direted by the Engr-in-Charge.

S&F in repair, PVC lids for water storage over head tank of any cap complete all as specified and directed by Engineer in Charge.

S&F in repair brass spindle with nylone washer to Brass chromium plated bib taps, stop cocks, pillar taps, wall / sink mixer etc, complete all as specified and as direted by the Engr-in-Charge.

S&F in repairs 15 mm size wall mixer (Sink / Bathroom) for mixing hot & cold water, cast copper alloy chromium plated, quarter turn capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15 mm size central hole basin mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe including 450 mm long braided connection pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC low level flushing cistern, valveless, syphonic action type, double push botton, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and making connection complete complete all as specified.

S&F in repair Glass Shelf of size 500 mm x 125 mm wide with stainless steel wire guard fixed on wall with and including bracket and brass screws and wooden / plastic cleats. Make:- Prayag or equvallent make mention in Appx A.

Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 550 x 400 mm fixed on and including new brackets complete including, 32 mm size brass chromium plated waste coupling, chain and plug and porcelain stopper, etc complete.

Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 440 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed..

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat cover, white, closed pattern with flat bottom, and cover with aluminised hinging device, brass chromium plated Jet shower with one meter long flexible pipe including all connection complete.

M&L for Cleaning of HDPE service water tank of capacity upto 500 litre, and the connected circulating pipes at any position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots etc or any other foreign material from the bottom, cover and internal surfaces by scraping using wire brush, draining out the water from the tank and washing internally with water & bleaching powder (0.10 Kg of bleaching powder will be mix in 1 litre water) and again draining out the water from the tank and writing the date of cleaning with white synthetic enamel paint on black background with synthetic enamel paint complete all as directed by Engineer-in-charge.

M&L for Cleaning of HDPE service water tank of capacity exc 1000 litre but not exc 2000 litre, and the connected circulating pipes at any position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots etc or any other foreign material from the bottom, cover and internal surfaces by scraping using wire brush, draining out the water from the tank and washing internally with water & bleaching powder (0.10 Kg of bleaching powder will be mix in 1 litre water) and again draining out the water from the tank and writing the date of cleaning with white synthetic enamel paint on black background with synthetic enamel paint complete all as directed by Engineer-in-charge.

S&F in repair, looking mirror of size 600 x 450mm with PVC moulded frame complete all as specified and directed by Engineer in Charge.

S&F in repair Aluminium (Extruded Section body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed in position complete.

S&F in repair 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F in repair, Aluminium, anodised, barrel tower bolts of extruded section 150 mm size, Complete all as specified and directed by Engineer-in-Charge.

S&F in repair, Aluminium, anodised, barrel tower bolts of extruded section 100 mm size, Complete all as specified and directed by Engineer-in-Charge.

S&F in repair, Aluminium handles, cast type, anodised 150 mm size

S&F in repair, Aluminium handles, cast type, anodised 100mm size

S&F in repair, Hasp and staple 100 mm size, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, Complete all as specified and directed by Engineer-in-Charge.

S&F in repair, Floor door stopper of aluminium alloy body, double legged with rubber shoe fixed to door, Overall length of cover plate 100 mm all as specified and directed by Engineer-in-Charge

S&F in repair, 125 mm long medium weight, cold rolled mild steel Butt hinges.

S&F in repair, 75 mm long medium weight, cold rolled mild steel Butt hinges.

S&F in repair, Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts.

S&F in repair, stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 fixed to steel / wooden shutter of door & windows complete all as specified and directed by Engineer in Charge.

S&F in repair, 0.56 mm thick aluminium sheet fixed over doors etc, complete all as specified and as direted by the Engr-in-Charge.

S&F in repair, sheet glass ordinary quality 3 mm thick and glazing with oil putty / wooden beading in squares not exceeding 0.50 Sqm each, complete all as specified and directed by Engineer in Charge.

S&F in repair, figured glass, pinheaded type ordinary quality 3 mm thick and glazing with oil putty / wooden beading in squares not exceeding 0.50 Sqm each, complete all as specified and directed by Engineer in Charge.

S&F in repair, 5 mm thick tinted glass fixed to aluminium door / window / ventilator with rubber gasket and aluminium snap beading, complete all as specified and directed by Engineer in Charge. Note:- Old rubber bead & aluminium snap beading retrived from demolition of glass to be reused for fixing of new glass.

S&F in repair, 18 / 19mm thick Particle board interior grade, prelaminated one side with decorative choice lamination and other side white lamination, fixed with nails or screws, complete all as specified and directed by Engineer-in-Charge.

Extra over item No 44 above for external teak wood lipping, 6 mm thick fixed with nails, complete all as specified and directed by Engineer-in-Charge.

S&F in repair continuous (piano) hinges, mild steel, bright finish or electrogalvanised., width of flaps when open 30 mm, complete all as specified and directed by Engineer-in-Charge.

S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed by Engineer-in-Charge.

S&F in repair, 12 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work, complete all as specified and as direted by the Engr-in-Charge.

S&F in repair, 6 mm thick Plywood, grade BWR, type BB, fixed with nails or screws to timber frame work, complete all as specified and as direted by the Engr-in-Charge.

S&F in repair Wooden planks of second class hard wood, 20mm thick, planed one side and edges tongued and grooved or rebated to replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, complete all as specified and directed by Engineer-in-Charge.

S&F in repair 25 mm dia powder coated Mild steel drapery rod wooden finish including fancy type matching colour brackets & endcaps for both ends complete all as approved by Engr-in-charge.

S&F in repair 20 mm Dia Curtain rail, stainless steel chromium plated, fixed with bracket and end caps etc, complete all as specified and directed.

S&F in repair 3 mm thick Acrylic seat cut to size shape fixed in Vertical or horizontal position fixed with screws, complete all as specified and directed by Engineer in Charge.

Taking down aluminium door / window shutter of size n exc 2.5 Sqm each & refixing in the same position / opening after easing and adjusting, tightening of joints changes of screws, cleats, etc, as per site requirement to make functional the shutter, complete all as directed by Engineer in Charge.

Resecuring or easing & adjusting old wooden shutters of any description area not exc. 1 Sqm each without taking down shutters, complete all as directed by Engr-in-charge.

Resecuring or easing & adjusting old wooden shutters of any description area exc. 1 Sqm and not exc. 2 Sqm each without taking down shutters, complete all as directed by Engr-in-charge.

S&F in repairs stainless steel sink, 1.00 mm thick for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495 mm x 420 mm, with bowl size 405 mm x 355 mm x 178 mm, including waste assembly, complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including waste assembly, complete all as specified and directed.

S&F in repair, 750 mm x 750 mm size kitchen plate rack made of stainless steel sheet 0.80 mm thick fixed to wall with plugs screw, Complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed by the Engineer-in-Charge

S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed by Engineer-in-Charge.

S&F Factory made solid panel pace door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed by Engineer-in-Charge.

M&L for rectification of leakage from Trap of WC fixed at first floor & above, by cleaning entire internal surface and applying quick setting cement paste mixed with water proofing compound internally all around trap including removing & re-fixing of grating with white cement complete all as specified & directed.

M&L for rectification of leakage from trap (Floor Trap / Nahani Trap) by cleaning entire internal surface and applying quick setting cement paste mixed with water proofing compound internally all around trap including removing & re-fixing of grating with white cement complete all as specified & directed.

M&L for mild steel Framed work such as grills, gratings, gates etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; nosing, framework of water tanks, band, straps, wind ties and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161 grade St.-240, complete all as specified and directed by Engineer-in-Charge.

M & L for preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Taking down cement plaster of any description on brick or stone masonary wall , etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified.

M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement and mixing only integral liquid water proofing compound as per manufacturer instruction complete all as specified and as directed by Engineer-in-Charge. Note:- WPC will be measured and paid seperately.

Supply only Liquid water proofing compound.

M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on brick work or cement concrete wall surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for rendering 10 mm thick in CM 1:3 on concrete surface of ceiling, including finished fair & even without using extra cement, complete all as specified and directed.

M&L for Preparation of new plastered surfaces of wall and applying two coats of cement base paint over one coat primer upto triple storey height, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparaing old painted surface of walls (plastered or unplastered) by washing, rubbing down and applying one coat of cement base paint, complete upto triple storey height, all as specified and as directed by Engineer-in-Charge

M&L for Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of oil bound distemper after removal of nails & filling nail hole with putty complete all as specified and directed by Engineer-in-charge.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including rubbish off the premises, all as specified.

M&L 15 mm thick screed or bedding layer in cement mortar (1:4) for laying floor finishes, complete all as specified.

M&L for 10 mm thick rendering / backing coat in cement mortar (1:3) to receive wall tiles, complete all as specified.

M&L for 25 mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in leveling layer for floor complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, all as specified.

All as per item No 82 above here-in-before but as in Skirting.

M&L for coloured glazed ceramic tiles in vertical surfaces of size 450 x 300 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified.

M&L for light shed colour vitrified ceramic tiles 10 mm thick (square) polished, area of each tiles n.exc 0.36 sqm for skirting / dado etc laid over existing backing coat, set and jointed in neat cement slurry and pointed in white or coloured cement to match.

All as per item No 85 above here-in-before but as in Skirting.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified.

M&L machine cut kota stone slab flooring 20-25 mm thick as in floor, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in -Charge.

M&L machine cut kota stone slab flooring 18 - 20 mm thick as in dado / skirting, risers of steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed by Engineer-in -Charge.

Dismantling of Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings including ridges, hips, valleys and flashings etc complete all as specified and as directed by Engineer-in-Charge. Note:- (i) The rate quoted shall also be deemed to include for taking down of wind ties.

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete.

All as per item No 91 but except Sheets using sheet retrived vide item No 90 above Note For Item No 91 & 92:- Quoted Rates shall be deem to include for Fixing only Wind Tie retrived from BOQ Item No 90

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for Rolled mild steel in roof trusses (framed), trussed, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engineer-in-Charge

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, wind Tie etc Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engineer-in-Charge

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings Fe- 290 (Gde E- 165) (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M&L for tightening bolts and closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6 mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25 mm in length complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of new zinc (or galvanised) steel and iron roof surfaces of any description over 10 cm width or girth to receive painting, by coating with mordant solution including washing and cleaning, etc and applying two coat of synthetic enamel paint over one coat red oxide primer complete all as specified and directed by Engineer-in-Charge

M & L for preparation of new steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets & snap grid complete all as specified and directed by Engineer-in-Charge.

S&F in repair designer particle boards or tiles of size 600 mm x 600mm 12 mm thick for insulation and acoustic purposes, fixed or laid / inserted to timber / GI / Aluminium framework with screws, including applying two coat synthetic enamel paint over one coat primer complete all as specified and directed by Engineer-in-Charge.

S&F snap grid for false ceiling of size 600 mm x 600 mm grid EXPOSED GRID SYSTEM fabricated with glavanised iron powder coated section all as shown on serial page No 185 of SSR part II (2020 print) complete all as specified directed by the Engineer-in-Charge.

M&L for Providing and fixing Gypsum tiles of size 600 mm x 600 mm x 12 mm thick in false ceiling fixed or laid / inserted to GI framework with screw or as per manufacturers instructions, complete all as specified and directed by Engr-in-Charge.

M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre, intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

M&L for Providing and fixing Gypsum Board 12 mm thick (water proof) in seemless ceiling fixed with screw or as per manufacturers instructions including necessary jointing and taping, complete all as specified and directed by Engr-in-Charge.

S & F in repair Non asbestos fibre cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 6 mm thick fixed or laid / inserted to timber / GI / Aluminium framework with screws complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new surface of ceiling board of any descreption and applying two coats of oil bound distemper over one coat of primer and 2 mm thick cement base wall care putty all as specified & directed.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 25 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrived from item No 109 above).

S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 20 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrived from item No 110 above).

S&F 20 mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 25 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrived from item No 111 above).

S&F 25 mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

M&L for cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified and directed.

Supply and fix in repair 500 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete

Supply and fix in repair 1000 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete

Supply and fix in repair 2000 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete

S&F in repairs 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S & F in repairs 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S & F in repairs 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repairs for 15 mm size angle cock fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified.

S&F in repairs for 15 mm size bib taps, fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified.

S&F in repairs for 15 mm size bib taps, long body, fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified.

S&F in repairs for 15 mm size piller tap, long screw shank, fancy type, cast copper alloy chromium plated, with capston head, quarter turn, screwed for iron pipe or for brass ferrule and fixed, all as specified.

S&F in repair PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified and as directed by Engineer-in-Charge

S&F in repair PVC connection 15 mm size, of length 600 mm, with PTMT nuts complete all as specified and as directed by Engineer-in-Charge

S&F in repair, 15 mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe complete all as specified and directed by Engineer in Charge.

S&F in repair, 20 mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe complete all as specified and directed by Engineer in Charge.

S&F in repair, 25 mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe complete all as specified and directed by Engineer in Charge.

S&F in repair brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed.

M/S FAROOQ AND SONS

M/S MAQBOOL BHAT & SONS

M/s Lal Enterprises

M/S TARIQ AHMAD SHEIKH

M/S WANI AND SONS

M/S Abdul Ahad Rather

M/S LUCKY BUILDERS

NAJAR ENTERPRISES