Spl repair to bldg No P-16 of OTM accn incl toilets and bathroom , Provn of toilet of training area at Rajput and Provn / replacement of internal GI of water supply at Q zone under GE (East) Firozepur Cantt

Amount

B/R Work Dismantling floor, hearth or wall tiling including cement mortar beding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as spd and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:6),complete all as specified.

M & L Glazed Ceramic coloured tiles 350 mm x 250 mm x 7 mm/ 450 x 300 x 7 mm thick over and incl 10 mm thick rendering in CM 1:4 on vertical surfaces, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match colour of tiles complete all as specified & directed.

M&L machine cut kota stone flooring 18-20 mm thick over & including 20mm thick screed bed in cement mortar 1:6, laid jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified.

M&L for cutting, Grinding including rubbing and polishing over old kota stone complete all as specified and directed.

S&F for Joint less non skid ceramic tiles 8-9 mm thick (square/rectangular) polished dark shade, area of each tile exceeding 0.36 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:6),complete all as specified.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for rendering 15mm thick in cement mortar (1:4) on any face of brick wall or concrete surfaces, surfaces finished even and fair complete all as specified

M&L for 10mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified.

M&L for applying two coats of Cement base paint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified.

M & L for applying three coats of White wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified.

M & L for applying three coats of White wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified.

M&L for applying two coats of oil bound distemper of new plastered wall surfaces of wall including preparation of surfaces complete all as specified.

M & L for applying two coat of Oil Bound distemper on old surfaces of wall including preparation of surface complete all as specified.

M & L for applying two coats of white wash on old Ceiling surface including preparation of surface complete all as specified.

M & L for applying two coat of Cement base paint over old surface of walls including preparation of surfaces complete all as specified.

M & L for applying two coat of white wash over old surface of walls including preparation of surfaces complete all as specified.

Hacking out old broken glass n. exe 1.5 SQM (any thickness size, quality of description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exc 1.50 Sqm each including cutting holes of appropriate size for insertion blocks of cement concrete for hold fasts complete all as specified.

All as per item No 20 here-in-before but size exceeding 1.5 Sqm & not exceeding 4 Sqm each.

Taking down shutter of any description exe 1 sqm and not exc 2 Sqm complete all as specified.

S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one or more rebates incl lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint incl hinges, hold fasts/lugs etc including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified.

All as per item No 23 here-in-before but size of frame 125X60mm complete all as specififed and directed.

M&L Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in bed blocks of hold fasts, coping etc incluing necessary form work complete all as specified.

S & F 35mm thick, 2nd class hard wood (Hollock), plain framed, panelled shutters, any number of panels, panels shall be of 12 mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.20(a) of MES Schedule Part-I in Section-8 complete all as specified.

S&F 35mm thick, 2nd class hard wood (Hollock), glazed and skelton shutters, open rebated and prepared to receive glass/ gauge etc divided in to squares with plain rounded mitered and rebated sash bars any numbers, fitted with cut and mitered beads for securing glass etc size of members as specified in clause 8.24 (a) of MES Schedule Part-I in Section-8, complete all as specified.

S&F Pressed handle of mild steel, oval type, 150 mm size, stove enameled black and fixed with steel screws, complete all as specified.

S&F Barrel tower bolts of mild steel, stove enameled black, with bright bolt, 200 mm long and fixed with steel screws complete all as specified.

S&F Sliding door bolts of mild steel, 300mm long, stove enameled black with bright bolt not less than 12mm dia with & including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified.

S&F 300 mm Mild steel helical door spring including roller and roller plate complete all as specified.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing complete all as specified.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per specification & drawing complete all as specified.

S&F Tower bolt of PTMT, 150 mm along heavy duty fixed with steel screws complete all as speicifed.

S&F Door handles of PTMT, 150 mm long heavy duty, fixed with steel screws complete all as speicifed.

S&F Butt hinges of PTMT 100 mm long heavy duty fixed with steel screws complete all as speicifed.

S&F Factory made box type steel window with side hung shutter including pintol hinges & 2 Nos 150 mm MS tower bolts on each shutter complete with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified.

S&F Factory made box type steel window with side hung shutter including pintol hinges & 2 Nos 150 mm MS tower bolts on each shutter complete without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified , including making good jambs portion by providing plaster in CM 1:4 and finishes as per existing complete all as specified.

S&F Steel ventilators fixed type complete with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

S&F Plain sheet glass 3mm thick, ordinary quality and glazing, fixed with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

S&F Figured glass, 3mm thick, pin headed type and glazing with oil putty in squares not exceeding 0.50 square metre each pane complete all as specified.

S&F in Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

M&L for Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over already primed surface, complete all as specified.

M&L for Preparation of old steel surfaces of any description, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified.

M&L for Preparation of old wood or wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint on already prepared old wooden surfaces complete all as specified and directed.

S&F aluminium anodised handles 125 mm long fixed to doors all as specified and directed.

S&F aluminium anodised tower bolts 150 mm long fixed to windows all as specified and directed.

S&F aluminium anodised butt hinges, 100 mm long, fixed with galvanised mild steel hinge pin complete all as specified.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified.

S&F 18mm thick Prelaminated particle board,flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade, prelaminated both side with decorative choice lamination, fixed with screws as in shutters & shelvesincluding 6mm thick teak wood leaping on three sides and 20mm thick on hanging side complete all as specified and directed.

S&F in repair Water storage tanks 1000 liters capacity rotational moulded, triple layer polythene (cyindrical vertical with closed top) hoisting and fixed in position on roofs including dismantling existing water storage tank complete all as speicifed.

S&F Ball valve of PTMT, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed in repair, complete all as specified.

S & F in repair gunmetal gate valve, 20mm bore dia with iron wheel head screwed both ends for pipe pipe, complete all as specified.

S&F 15mm bore GI tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors incl taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified.

All as per item above 56 herein before but 20 mm bore tubing.

S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

S&F in repair 15mm stop valve cast copper alloy with crutch or butterflty handle, screwed down for iron pipe or brass ferrule fancy type chromium plated with long shank and cup (Concealed type).

S&F in repair 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup complete all as specified.

S & F in repair Bib tap of cast copper alloy chromium plated, 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

M&L for Cutting chases, pinning in. making good to facings where required for brick wall and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. including applying evenly a coat of industrial bitumen 85/25 at the rate of 1.2 kg/Sqm including cleaning of surfaces and and making good, with the existing surfaces finish i.e. terrazo finish to walls/floors incluidng grinding/polishing etc cutting not exc 10 cm girth Complete all as specified.

S&F brass CP Angle cock with long shank/flang and cup (concealed type) 15 mm dia bore screwed down, high pressure,with crutch handle, screwed both ends for iron pipe or for unions and fixed fixed all as specified.

S&F in repair Water storage tanks 500 liters capacity rotational moulded, triple layer polythene (cyindrical vertical with closed top) hoisting and fixed in position on roofs including dismantling existing water storage tank complete all as speicifed.

S&F Vitreous China bowl urinal flat back, size of 465x355x265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, and flush pipe ) including waste pipe 32mm dia bore fixed in repairs complete all as specified and directed.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary cement concrete and 110 mm bore PVC (SWR) 'P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified.

S&F in repair Vitreous China wash down water closet pan (pedestral pattern), White (excluding fixing bolts, flushing cistern and flush pipe), with plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixed in repairs complete all as specified.

S&F Low level flushing cistern, PVC (white), 10 liters capacity, with inlet ball float valve, PVC flush pipe and necessary fixing accessories and connecting to water pipe and EWC etc and fixed in repairs complete all as specified.

S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified.

S&F PVC connection 15 mm size PTMT nuts of length 450 mm fixed all as per speified.

S&F in repair, 15 mm bore, pillar taps, cast copper alloy, with cpstan heads, chromium plated, screwed down high pressure with or without lettered Hot cold all as specified.

S&F in repair, chromium plated shower rose 125mm size for fixing with 15mm pipe (Minimum weight 40 gms) complete all as specified.

S&F Shelf of PTMT fixed with & including CP brass screws & wooden/Plastic cleats (min. weight 300 gms) complete all as spd and directed.

S&F in repairTowel rail 450 mm long of PTMT fixed with & including CP brass screws & wooden/Plastic cleats (min. weight 170 gms) complete all as specified.

Dismantling CI pipe/any type alongwith fittings of 75/100mm dia, below or above ground level, jointed in cement mortar and taking out complete all as specified.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamps complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamps complete all as spd and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore, PVC (SWR) bends any radius complete all as specified.

S&F 75mm bore, PVC (SWR) bends any radius complete all as specified.

S&F PVC (SWR), floor trap, 75mm bore, Plain with grating including jointing with solvent cement complete all as specified.

S&F PVC (SWR) junction single, (single T) equal or unequal 110 mm all as specified.

S&F 75mm dia Junction single (Single or double T) equal or unequal

S&F Water storage tanks 500 liters capacity rotational moulded, triple layer polythene (cyindrical vertical with closed top) hoisting and fixed in position on roofs, complete all as specified.

S&F Ball valve of brass, 20mm bore, high pressure with ploythene float and fly nut complete screwed for iron pipe of brass ferrule and fixed ,complete all as specified.

S&F Bib tap of cast copper alloy, 15mm bore, with crutch or butter fly handle, screwed down,screwed for iron pipe or for brass ferrule complete all as specified.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary cement concrete bedding and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, complete all as specified.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc complete all as specified.

S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size PVC waste pipe, angle iron/cast iron brackets of required size complete all as specified and directed.

S&F Vitreous China bowl urinal flat back, size of 465x355x265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, and flush pipe ) including waste pipe 32mm dia bore complete all as specified and directed.

S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified.

S&F Brass chromium plated tubular towel rail of PTMT, 60cm long between flanges fixed with wdn/plastic cleats.

S&F 15mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) complete all as specified.

Dismantling brick tiles laid in single layer jointed & pointed in cement mortar complete all as specified.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.

M&L 10mm plaster in CM(1:4) finished even and smooth with using extra cement on roof with water proofing compound complete all as specified.(WPC shall be measured separately)

Supply only integral water proofing compound complete all as specified.

M&L for tack coat of industrial bitumen 85/25 @ 1.50 Kilogram per square metre over a coat of bitumen primer @ 0.30 litre per square metre including preparation of roof surfaces complete all as specified.

M&L for 150 micron thick polythene film including preparation of roof surfaces complete all as specified.

M&L for Mud phuska, 80mm thick average, consolidated thickness, on flat roofs including 25 mm thick mud plaster complete all as specified.

M&L for Brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar (1:3) mixed with 5% of cruide oil by weight of cement and pointed flush including leaping plaster complete all as specified.

.-ditto- all as per item No-105 above but except brick tiles complete all as specified and as directed.

Demolition of brick work built in cement mortar of any specification and in any position complete all as specified.

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

M&L All as per item 108 above here-in-before but using old bricks retrieved from demolition under item no. 107 above here-in-before including cleaning and removal of mortar from old bricks.

M&L Brick work in cement mortar 1:4 using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls complete all as specified.

Demolition of cement concrete of any description and in any position not otherwise specially provide for any thickness complete all as directed.

M&L for Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in benching, kerbs, mud stop, rounded or chamfered on edges including form work complete all as specified.

M&L for laying APP based polymeric membrane 3mm thick with minimum weight not less than 3 kg/sqm, reinforced with non woven polyster fabric (wt not less than 160 gms/sqm) torching Joints/overlaps with a propane or a butane gas torch,laid with a minimum overlap of 150mm with thermo fusable finish laid/bonded over a coat of hot blown bitumen 85/[email protected]/sqm,over forced application bitumen primer @0.30 litres per sqm,including preparation of plastered surfaces of Sunken portion ,complete all as specified and as directed.

M&L rendering 10mm plaster in CM(1:3) finished even and smooth with using extra cement on vertical surface of sunken portion wall and floor with water proofing compound complete all as specified. (WPC shall be measured and paid separately)

S&F GI pipe 40 mm bore medium grade including fixing to walls as in spouts of sunken portion complete all as specified.

M & L Cement concrete (1:5:10),type E-2 using 40mm graded stone aggregate in foundation filling and mass concrete complete all as specified.

S&F Mild steel curtain rod PVC powder coated with fixing side brackets, end cups, rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified.

M&L for PCC (1:3:6) type C-1 (20mm graded stone aggregate) 50mm thick as in plinth protection including joints and the same filled with bitumen mastic (01 Part of bitumen and 03 Part of sand) complete all as specified and as directed.

M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in floor topping/flooring, 40mm thick, surfaces finished even and fair without using extra cement complete all as specified.

M & L for formwork to chullah, hooks, chajjas, troughs and similar work including edges complete all as specified.

M&L for reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in chajja, supported on walls, beams, roofs, landing, bolconies, canopies and in shelves and like complete all as specified.

M&L Mild steel 10mm dia and over TMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified.

M&L Mild steel TMT bars 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as directed by Engr-in-charge.

M&L Mild steel TMT bars 8mm dia and over upto and including 10mm as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as directed by Engr-in-charge.

M & L for applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete on damaged surfaces applying polymer modified mortar in CM 1:3 including mixing of polymer latex additives upto 60mm thickness (Chajjas fins, border etc) (i) Qty of ploymer to be used 15% by weight of the cement. (ii) Use of electrical mixer to get the homogeneous dough on bond coat surfaces. (iii) To achieve required thickness repear this step after 24 hrs as required.(iv) Keep the surfaces moist using water forg for 5 to 7 days etc complete all as specified and as directed. (v) Rate shall be inclusive of all necessary scaffolding for building height up to 24 meters complete all as specified and directed by Engineer-in-Charge. Make : - Epoxy bonding agent shall be Krishna, Dr Fixit, MC Bauchemie and M/s Cemistik, Sika or Equivalent as directed.

S&F Anodised aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S & F Anodised aluminum door shutters, aluminium section weighing 0.55 Kg/ meter including necessary joining cleats, glazing clips, rubber nafron packing, handles 02 Nos in each doors, hinges, anodised aluminium snap bidding screws etc complete all as specified.

S&F sheet glass,ordinary quantity,in squares exc 0.5 sqm each pane 5.5mm thick complete all as specified.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140 mm complete all as specified.

S&F door closer hydraulically regulated designation No .03, universal type, suitable for door shutters of 851 to 1000 mm in width and off weight between 61 to 80 Kg and fixed aluminum (extruded section) complete all as specified.

S&F Mortice lock, vertical type,size 100mm (04 lever) complete all as speicified.

S & F Plain Aluminium sheeting 0.56 mm thick alloy 31000 H4 as in Crumple joints straight flashing fixed with steel screws with PVC plugs to walls in any height of Bldg and in any position complete all as specified and directed by Engr-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified.

M&L for PCC 1:4:8 type 'D2 using 40mm graded stone aggregate in foundation filling & mass concreate complete all as specified.

Return filling in including spreading levelling watering and well ramming in layeras n.exc 25 cm in soft soil complete all as specified.

Removing excavated material n.exc 50m and deposting where directed at a level n.exc 1.5m above the starting point complete all as specified.

M&L Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified.

M&L for Hardcore of broken bricks of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L 25mm thick PCC 1:2:4 type B-1,using 20mm graded stone aggregate, as in sub base of flooring,surface finish rough to receive floor topping complete all as specified.

M&L for Damp proof course,40mm thick in cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate using WPC (powder) including necessary form work complete all as specified. (WPC shall be measured separately).

M&L for Cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection, 75mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified.

M&L Reinforced cement concrete nominal mix (1:2:4), type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

M&L for Reinforced cement concrete nominal mix (1:2:4), type B1 using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span including necessary form work complete all as specified.(form work and reinforcement measured separately).

M & L cement concrete 1:3:6 type C2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid & tested for 150 mm bore pipe

M & L 150 mm dia salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for & forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished and reforming branching as required for 150 mm dia pipes complete all as specified.

Surface dressing n exc15 cm deep in soft/loose soil complete all as specified.

M&L for Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor topping, 75 mm thick, complete all as specified.

M & L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, jointed and pointed with gray cement and no pigment over sand cushioning complete all as specified and directed.

M & L sand filling under floors or in foundations including watering and consolidation complete all as specified.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specififed and directed.

M & L for precast cement concrete 1:2:4 type B-1 with using 20 mm graded stone aggregate as in manhole cover and placing where directed including necessary formwork complete all as specified

Repair to existing window/ventilators with necessary fittings such as welding, cutting, handle, hooks and other Miscellaneous items which is required to repair the window/ventilators shutter to make easy for opening & closing complete all as specified and as directed by Engr-in-Charge.

E/M WORKS M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated,FRLS multistranded, single core unsheathed, copper conductor cables drawn through and including PVC conduit with all accessories concealled in wall and fixed to ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed,multi stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth dolly including sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell point controlled by one ,one way switch all as specified and directed. (a) One light point / fan point/ Exhaust point controlled by one single pole one way switch.

(b) One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board .

(c) One 3 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item no. 154 above, but one switch socket outlet multi purpose, 3pin, 15 Amps, point to be controlled by one switch and wiring with 2.5 Sqmm PVC FRLS cable,insulated, stranded, unsheathed copper conductor on Independent board with continuous earth wire of size 2.5 sqmm, PVC copper conductor, insulated, unsheathed, stranded, complete all as specified.

All as per item no.154 above, but one switch socket outlet multi purpose, 3pin, 15 Amps, point to be controlled by one switch and wiring with 4 Sqmm PVC FRLS cable,insulated, stranded, unsheathed copper conductor on Independent board with continuous earth wire of size 4 sqmm, PVC copper conductor, insulated, unsheathed, stranded, complete all as specified.

S&F Switch piano flush type 6 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed.

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed.

S&F batten holder (with metal ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed.

S&F LED bulb of 9/10 watts B-22 CDL 3 star 6500K, complete all as specified.

Supply and fixing LED light fitting 1 x 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection complete.

S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, SPN DB with 200 Amps rated bus bar, 4 way, IP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly cocealled in wall, factory made, including making good distrubbed surfaces with matching colour.

S&F MCB SPN, 40 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified.

S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified.

Suplying and fixing 1100 volts grade heavy duty 4 Sq mm two core cable PVC insulated aluminium Stranded conductor, served with inner shething of PVC sheathed in service conections suspended by insulating hangers and procelean beat not more than I metre apart including 4 Sq mm suspension wire, one twin core cable flat or circular

Taking down carefully existing copper/alumimium point wiring for light/fan/socket out let points complete with fitting and fixtures, battens, wire etc and making good the disturbed surfaces of walls and ceilings, complete all as specified.

Taking down unserviceable main switches, electric metres and distribution boards single phase complete all as specified.

Taking down carefully old unserviceable sub main wiring and making good disturbed sufaces and matching with existing complete all as directed and specified.

S&F Switch piano flush button type 15 Amps, single pole, one way, ISI marked, complete all as specified.

S&F Socket outlet,2 in 1, 5 pin, 5 Amp, piano flush type, ISI marked, complete all as specified.

S&F Socket outlet 2 in 1, 6 pin,5 Amp and 15 Amp, piano flush type, ISI marked, complete all as specified.

S&F Lamp holder, insulated body, threaded dome pattern, suitable for bracket/batten fittings, complete all as specified.

S&F in repairs stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 230 volts, 6 Amps, complete all as specified.

S&F in repair, Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, VTPN DB with 200 Amps rated bus bar, 4 way, FP-42 protection surface mounting, 415 volts, dust and vermin proof, suitable for incorporation of MCCBs duly concealled in wall, factory made, including thermal based release adjustable type 4 pole, 100 Amps, 50 Hz, 415 volts with rupturing capacity 16 KA and making good disturbed surfaces with matching colour, complete all as specified.

S&F in repair Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet, powder coated, SPN DB with 200 Amps rated bus bar, 8 way, FP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCCBs duly concealled in wall, factory made,including making good disturbed surfaces with matching colour, complete all as specified.

S&F in repairs MCB, SPN, 40 Amps, 240 volts 10KA duly ISI marked, complete all as specified.

S&F in repairs MCB, single pole, 240 Volt, 6 to 32 Amps, 10 KA complete all as specified.

S&F in repairs for sub main wiring with two single core PVC insulated unsheathed stranded copper conductor cable FRLS 2x6 Sqmm single core 650/1100 V, drawn through & including rigid PVC rigid conduit 25 mm dia including continuous earth wire of size 1x6 sqmm, PVC insulated and unsheathed cable copper stranded conductor (green colour), complete all as specified. NOTE:- Two runs of cable, 1 run of earth wire & one run of PVC conduit shall be measured as one length.

Cutting hole of suitable size and making good, the disturbed surface, grouting nuts & bolts for fixing of exhaust fans, complete all as specified.

M&L Earthing as in repairs complete, all as shown on electrical plate No 3 of MES schedule part-I, and as specified including the following:- (i) Galvanised steel earth plate of size 60cmsx60cmsx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth not less than 1.50 metre below normal ground level. (ii) Earth plate surrounded by and packed with char-coal and common salt in alternative layers (n.exc 15cms each layer). (iii) 4 mm dia (8 SWG) G.I earth wire from earth plate to main switch board including necessary GI bolts, nuts check nuts, washers, thimbles etc. (iv) 15 mm bore light grade, GI pipe for protection to earth-strip. (v) 20mm bore, medium grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontally to the earth pit. (vi) 50mm thick pre-cast cover of cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate and MS angle iron 25x25x3mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces. (vii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance upto 50 metre as directed.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire, complete all as specified.

S&F as in repairs XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 35 Sqmm nominal cross section, 3.5 core, flat or circular, PVC FRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC FRLS sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified .

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm on plan, for laying of cable and getting out, compete all as specified.

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified. (Excavation and earth work measured separately). Note- Punned down thickness shall be measured.

S&F in repair Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified. (Excavation and earth work measured separately.

Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified.

Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified.

S&F Mild steel galvanised pipe, light grade, 50 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/road crossings, complete with and including clamps socket & elbow etc complete all as specified.

M/s Surjit Singh and bros

M/s Sarup Singh