8270-SPECIAL REPAIRS TO ROOF TREATMENT, JOINERY, FLOORING, PLUMBING, SANITARY FITTINGS AND OTHER CONNECTED REPAIRS IN BLDG NO P-191 (ORS MD ACCN) AT NANDMBAKKAM UNDER GE STM CHENNAI

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thick (below or above ground level)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified.

M&L for non skid ceramic tiles each tile area (square/rectangle) exc 0.06Sqm but not exceeding 0.11Sqm tile thickness 7 to 8 mm, in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer with CM 1:6, 15mm thick for laying floor finishes all as specified .

M&L for glazed ceramic tiles coloured 300x 450x5 to 6mm thick on vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.incl 10mm thick in CM 1:4 as backing coat for fixing dado tiles all as specified.

Roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust, etc., brushing neat cement slurry with 3.0kg of cement per sqm

M&L for plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring 40mm thick finished even and fair.

M&L for non skid ceramic coloured tiles, area of each tile exc 0.18sqm and n.exc 0.38sqm (square/rectangle) 7 to 8mm thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed in CM 1:6 all as directed.

All as per item No.07 here in before, but on vertical surfaces incl 10mm thick CM 1:4 as in backing coat of dado/skirting

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment incl 15mm thick cement screed bed in CM 1:6

All as per item No 9 above but bull nosed as in treads inclusive of screed bed in C.M 1:4, 15mm thick

All as per item No 9 above but on vertical surfaces inclusive of back coat in C.M 1:4 of 10mm thick

M&L for PCC 1:3:6 75mm thick C2 type (using 40mm graded stone aggregate) as in plinth protection/hard standing finishing cement concrete surface even and smooth without using extra cement.

M&L for brickwork with fly ash bricks , straight or curved on plan to any radius in half brick thick walls built in CM 1:4

Taking down cement or cement lime plaster, on brick or stone walls, ceiling including raking out joints, hacking for key, scrubbing down with water, etc.any description.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 finished even and smooth without using extra cement.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:4 finished even and smooth without using extra cement.

M&L for rendering 10mm thick on fair faces of concrete surfaces of ceiling in CM 1:3 finished even and smooth without using extra cement.

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 for concealed water tubing, etc.& making good, cutting not exc 10 cm girth

Taking down GI water tubing and connections 15mm bore and taken as sch of credit.

Taking down GI water tubing and connections 20mm bore and taken as schedule of credit all as directed

S&F GI tubing, medium grade, 15 mm bore with all fittings; fixed to walls and ceilings or laid in floors complete all as specified

S&F tubing, medium grade, galvanised, 20 mm bore with all fittings; fixed to walls and ceilings or laid in floors complete all as specified

M&L for taking up or down steel tubing and connections, including cleaning for refixing of GI water tubing of 15mm bore all as specified and directed

Taking down GI water tubing and connections and taken in to schedule of credit for 20mm bore all as directed

S&F in repair Vitreous China wash down water closet (pedestal pattern), white (excluding flushing cistern and flush pipe) incl Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, seat cover etc, complete all as directed

S&F in repairs vitreous China wash basin, white, flat back, size 550x400mm incl 32mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed,

M&L for in repairs 10 litres capacity PVC low level flushing cistern including flush pipe complete with ISI marked body and ISI marked syphon (Make : Parry ware Slim line or equivalent make as listed in PS)

S&F PVC connections 15 mm size with PTMT nuts of length 450mm all as directed

S&F in repairs bib cock, fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed all as specified Make : Parry ware or equivalent make as listed in PS

S&F in repairs bib cock two way double Handle with flange, fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed all as specified Make: Prayag Cat No 8312 or equivalent make as listed in PS

S&F Hand Shower (Health Faucet) Chrome Plated with 1.5 Meter Long Flexible Tube & Wall Hook. Make :Prayag Cat No BEA40 or equivalent make as listed in PS

S&F in repairs fancy type chromium plated angular stop cock long body

S&F CP wall mixer 2 in 1 for mixing hot & cold water screwed down for iron pipe & fixed with provn for connection to over head shower with bend pipe.

S&F swan neck bib taps for sink chromium plated, screwed down, high pressure, with or without lettered with long screwed shanks and fly nuts, screwed for 15 mm bore

S&F in repairs pillar taps, fancy taps chromium plated, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15 mm bore

S&F stainless steel Soap Dish

S&F Towel rail 600mm long & including Chromium plated brass screws & wooden / plastic cleats (Minimum weight 190gms)

S&F in repairs Chromium plated 125mm shower rose with or without swivel joints, any size, including fixing to steel pipe or union

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm

S&F kitchen plate rack made stainless steel 0.8mm thick complete of size not less than 900x750x200mm, duly assembled and fixed to wall with wall screws / fasteners all as specified and directed

M&L for machine cut Granite slab 20mm thick over cement screed base laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete nosing edges including 20mm thick cement screed in CM 1:6 all as directed.

Rounding to edges of stones slab one edge, such as in steps, cooking platform and other similar situation

S&F in repairs 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

M&L for for 75mm PVC (SWR) pipes of Type 'B' single socketed in any length with rubber ring joints, laid in trenches or in floors/walls

PVC (SWR) bends any radius 75mm bore with access door

S&F PVC (SWR) vent cowl 75mm bore

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75mm with access door

M&L for for 110mm PVC (SWR) pipes of type 'B' single socketed in any length with rubber ring joints, laid in trenches or in floors/walls

PVC (SWR) bends any radius 110mm bore with access door

S&F PVC (SWR) vent cowl 110mm bore

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm with access door

Dismantling water tanks 500 litres capacity and taken as sch of credit

S&F rotational moulded polyethylene water storage tanks 500 liters capacity (cylindrical vertical with closed top and locking arrangements) double layered, hoisted and fixed in position all as specified in SSR Part I Incl 3 no's 20mm Nipple suitable for HDPE water tank. (minimum weight 20mm-45gms complete all as specified.

S&F of 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed. (Minimum weight 25mm-455gms)

S&F 20 mm bore gun metal globe or gate, valves with iron screwed both ends for iron pipe & fixed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition)

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-s or Fe-410-0

M&L for mild steel TMT bars 5 mm dia and over and upto 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-s or Fe-410-0

M&L for providing precast cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in cover slabs, shelves and set in cement mortar 1:4 complete with joints to match all as specified.

M&L for for Reinforced cement concrete (Nominal mix) 1:2:4 of Type B1 using 20mm graded stone aggregate as in slabs supported by walls all as directed

Use and waste formwork to soffits of suspended slabs such as roof slabs, landings, rough finished surfaces of concrete flat

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each

Taking down chowkats or frames with shutters (without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq. m each

Taking down shutters of any description n.exc 1.00 Sqm each

Taking down shutters exc 1.00 Sqm and n.exc 2 Sqm each.

Taking down shutters of any description exc 1.00 sqm but n.exc 2 sqm each and refixing in the same opening after necessary repair work.

Taking down shutters of any description n.exc 1.00 Sqm each and refixing in the same opening after necessary repair work.

M&L for second class hard wood plain, solid, straight chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

M&L for second class hard wood 35mm flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides

M&L for second class hard wood 35mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers.

M&L for second class hard wood 30mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers.

M&L for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed within wooden beading or with nuts and bolts to existing steel windows/wooden windows

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows.

Hacking out broken glass any thickness, size, quality, from wooden frame/steel frames fixed with putty or with wooden beads.

M&L for sheet glass ordinary quality of 4.00 mm thick n.exc 0.5 Sqm panes

M&L for Figured glass 4mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane

S&F in repairs prelaminated particle board, Exterior grade, prelaminated both sides with decorative choice lamination, 18/19 mm thick, fixed with screws to timber frame work as in shelves/ cupboard shutters and partitions

M&L for 6mm thick teak wood lipping fixed with nails

S&F 100mm Hasp & staple, safety type, aluminium with mild steel hinges pin including bolt to hinges plate & fixed with screw

S&F MS flat iron 25x3mm for hold fasts Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintle hinges; large hasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hook for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; plate washers & similar small articles conforming to Fe 290 Gde E-165

S&F Factory Made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in opening including making good to the jambs as per specification and as directed.

Note: The quote rate shall be inclusive of following:- (i) Existing/new wall edges shall be finished properly in cement plaster in CM 1:4 including supply and fixing of 6 Nos wooden plugs for catch door frame size not exc 17 sqcm average sectional area and 100mm long. (ii) Frame shall be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS Screw, 3 each on either side

Supply and fix Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & all as directed.

S&F in repairs curtain rails, Aluminium anodised alloy tubular 20mm dia with fixing brackets, stops, rollers, etc.

Treating ends of posts, back of chowkats, etc., area tarred exc 0.1 sq.m but n exc 0.5 sq.m. each treated with tar or coal tar black paint

Treating small articles such as stop, covers, gully gratings, holdfasts, ends of post, backs of chowkats, etc., area n exc 0.1 sq.m each treated with tar or coal tar black paint

S&F Stainless steel butt hinges,100mm medium weight, cold rolled

S&F 100mm butt hinges, extruded Aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22

S&F butt hinges,75mm medium weight, cold rolled Stainless steel, and fixed

S&F extruded aluminium alloy handles,150mm fabricated type anodized

S&F extruded aluminium alloy handles,100mm fabricated type anodized

S&F Aluminium, 200mm anodized, barrel tower bolts extruded section

S&F Aluminium, 150mm anodized, barrel tower bolts extruded section

S&F Aluminium, 100mm anodized, barrel tower bolts extruded section

S&F shutter, hooks & eyes Aluminium, 150mm

S&F in repairs shutter, hooks & eyes Aluminium, 150mm

S&F Aluminium alloy, anodized, 250mm sliding aldrop bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy

S&F Aluminium alloy, anodized, 300mm sliding aldrop bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy

Mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F framed work such as grills, gratings framed guard bars, end of bars forged or shouldered or riveted in to spikes conforming Fe.290. Gde-E-165

S&F anodised aluminium powder coated frame for ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium window/ ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m ding necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 nos) suitable handle (1 no) complete all as specified

Complete removal of existing treatment washing, rubbing down and stopping of any description on wall surfaces.

M&L for applying two coats of oil bound distemper white or tinted on walls complete over a coat of wall primer and two coats of wall care putty to obtain uniform smooth surfaces all as specified and as directed

M&L for applying two coats of exterior emulsion weather proof paint over a coat of external wall primer over two coats of exterior wall care putty all as specified and as directed.

M&L for preparing old decorated surfaces applying one coat of white wash on walls complete all as directed.

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash to match with the existing surfaces.

Preparing of old ceilings surfaces and applying one coat of white wash to match with the existing surfaces.

M&L for painting new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces.

Preparation of old painted wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint.

M&L for painting new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/zinc chrome primer including preparation of surfaces.

Preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint .

Removing the existing roof treatment of any description completely and brushing the cleaned surfaces of concrete with neat cement slurry @ 3Kgs of cement per sqm including remove all the debris from site and rubbish off the premises complete all as specified and as directed.

M&L for 25mm average thick, PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in levelling course over the roof slab all as directed

M&L for 10mm thick cement plaster in CM 1:3, mixed with water proofing compound over the levelling course while the concrete is green, finished even and smooth without using extra cement all as directed. Note : WPC shall be measured and paid separately.

Supply only liquid water proofing compound

M&L for for APP Modified prefabricated five layer water proofing membrane, not less than 4 mm thick and weighing not less than 4.50 kg/sqm reinforced with non woven polyester matt black finished over compatible primer @ 0.3 Ltrs per sqm, torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminium paint over a coat of blown bitumen 85/25 grade @ 1.20Kg/Sqm over the membrane. The Overlap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage. Manufacturers: STP/ IWL India Ltd / SAPL (ARGO-P) / Hydrotech Limited (Hydroflame) Note: The work shall be carried out by authorized applicators of manufacturers only.

Demolition brick work built in cement mortar including all quoins, arches Pillars etc.

Demolition of cement concrete in any position and in description not otherwise provided for

M&L for plain cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete all as specified.

M&L for plain cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in water tank staging, etc all as specified.

M&L for Brick work with fly ash bricks, straight or curved on plan exc 6 mean radius, built in cm 1:4. for man holes.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping and benching incl weathering slightly rounded or chamfered angles and throating as directed including form work all as directed.

Extra for forming fair finished to drains or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

M&L for 15 mm thick rendering in CM 1:4 mixed with water proofing compound, on fair faces of brick work, including finishing the surface even and smooth without using extra cement. Note: WPC shall be measured and paid separately

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil

Demolition and breaking up 150 mm dia (salt glazed ware, AC or Reinforced concrete) pipe jointed in cement mortar and disposed off the premises all as directed.

M&L for PCC 1:3:6, type C-2 using 40mm grade stone aggregate to drain pipes including forming cradles after they are laid and tested, for 150mm bore all as specified

M&L for reinforced concrete pipes 150mm bore, class NP-2, laid and jointed complete with collars laid in trenches and jointed in CM 1:1 and tested as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required 150mm bore all as specified.

Returning, filling in, using excavated soil including spreading, levelling, watering & well ramming in layers not exc 25 cm complete.

Removing excavated material to a distance exceeding 50 mtr and not exceeding 1.5 km and depositing out of the defence premises at a level up to distance of 1.5 km above the starting point.

M&L for Cutting holes in brick walls in cement mortar exc half brick but n.exc one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall)

Taking down carefully copper/ Aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc can be measured separately) removing the material from wall/ceiling etc, making good the disturbed surfaces and taken as credit.

M & L for Wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable FRLS 1100 volts grade, multistranded with copper conductors conforming to IS specifications, with colour code drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories concealed on wall and fixed on ceiling etc with suitable clamps, screws, etc or concealed in wall including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting not exceeding 10 cm girth ,including Provn of 1.5 sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-

One light point controlled by one switch.

One ceiling fan point controlled by one switch and one regulator.

One exhaust fan point controlled by one switch and one regulator.

One 3 pin 5 Amps switch socket on independent board.

One 3 pine 5 amps switch socket on same board along with other switches.

One bell point controlled by bell push switch on independent board.

One light point controlled by two 2 way switches.

All as per item No 137 herein before but with 2.5 Sqmm single core PVC cable for one 3 pin 15 amps switch socket outlet on independent board.

Taking down sub main wiring (or) power wiring complete upto of 6 Sqmm to 10 Sqmm including PVC conduit removing to stores or taken as credit and making good the disturbed surfaces of wall, etc all as directed.

M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 6 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories incl accessories fixed on wall/ceiling etc., or concealed in wall, making good disturbed surfaces on walls and connecting to common earth dolly all as specified and directed. Note for item Nos 137 to 140 :- (a) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. (b) For concealed wiring the quoted rate shall be inclusive wherever required cutting chases etc.

Taking down carefully by unscrewing from boards/ outlet boxes, wall ceiling fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, with plug, switch fuse and regulators etc., taken as credit and making good the disturbed surfaces of wall etc all as directed.

Supply & Fix Ceiling rose 6A 240V 3 plates , 3 terminals PVC/Polycarbonate body.

Supply and Fix Switch piano flush type 5 amps single pole, one way, 240 Volts all as directed.

Supply and Fix Switch socket outlet 3 pin, 5 amp, flush type all as directed.

Supply and Fix Bell push flush type 5 amps single pole 240 Volts all as directed.

Supply and Fix Bell ding dong, AC, 230 volts, single pole all as directed.

Supply and Fix Switch socket outlet multipurpose 3 pin, 15 amp and one pin, 5 amp controlled by one switch all as directed.

S & F stepped type electronic fan regulator flush type all as directed.

Supply & Fix Lamp holder PVC/Polycarbonate type with back plate batten fittings.

Supply and fixing highly efficient LED Bulb 9 W with B 22 caps.

Supply and fixing LED lights fitting 1x 22 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make:- Havells cat No. ENDURALINEARNEOBS22WLED865SPCWH/ PHILIPS cat No B1021LED25S6500PSUGRST/CROMPTON cat No. LDRR24-CDL/BAJAJ Cat No. BCLAB SP 22L LEDCWPCSD/ Halonix Cat No.HLB-03-22-CW-AL

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make:- Havells cat No.ENDURA LINEAR NEO BS10WLED 865SPC WH / BAJAJ Cat No. BCLAB SP 10WH/ CRMPTON Cat No. LDLL 10- CDL/ Halonix Cat No.HLFPS-22-02-42-CW-R

S&F round shape 10/12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete three core flexible copper conductor cable of suitable size complete. Make:- Havells cat No. INTEGRA NEO SURFACED LS10WLED 840S/ CROMPTON cat No. LCDSPLN-R-12-CDL/ BAJAJ Cat No. BGSLO SLEEK SURFACE 12WWH RD.

S&F LED light fitting 9W/10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make:- Havells cat No.HEXAFT10WLED 857SSYMBOPC/ PHILIPS Cat No. WT202W LED10S CW PSU S3 PC /BAJAJ Cat No. BIBWP 10W LED.

Removing the existing ceiling fan from site and refxing serviceable ceiling fan after completing painting complete all as specified and directed.

M&L for painting of ceiling fan complete in situ with one coat of synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust including marking of MES No complete all as specified and directed.

S & F Sheet metal enclosure for MCB DB single pole and neutral 240 volts, double door, 8 way with 200 amps rated bus bar.

S & F RCBO single pole & neutral, 240 volts, 40 amps, 30mA, 10kA all as directed.

S & F MCB single pole 240 volts, 6 to 32 amps all as directed.

Removing old building security lights, supply and fixing energy saving LED security light fitting 30W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection complete all as specified and directed. Make: Havells cat No- ENDURA PEARL SL30W LED 757SASY TOPCMP/ HALONIX cat no HLSLD-09-30CWL-R/ CROPTON cat no. LSTS-30-CDL/NL-M/ Wipro cat No.LR02-331-XXX-57-XX 30Watt.

Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B-1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed.

GOKUL ENTERPRISES

DJ Group

G RAVI

power links

RMK INDUSTRIES

RKRISHNANANDSONS