Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.4 LAccepted-AOC NAROO PO ICHIGAM BADGAM KASHMIR 191111 J K | ICHIGAM | BADGAM | JAMMU AND KASHMIR | 191111 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹9.6 L+₹5,487 (0.57%)Rejected-AOC | L2 | Rejected-AOC rejected |
Tender Value
₹9.6 L
EMD Value
₹19,200
Closing Date
25 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF SRINAGAR
GE AF SRINAGAR AF STN SRINAGAR 190007
IMPROVEMENT OF STN WORKSHOP AT 1WING, AF STATION SRINAGAR.
2022_MES_554088_1
GE(AF)SGR- 31 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE AF SRINAGAR
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE AF Srinagar
₹19,200
Yes
29 Nov 2022
24 Sept 2022
26 Oct 2022
24 Sept 2022
25 Oct 2022
8 Oct 2022
Amount
Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, all as specified.
M&L for brick work with sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6 m mean radius, built in CM 1:4, complete all as specified and as directed.
Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified.
M&L for 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement, all as specified.
M&L for 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement, all as specified.
M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash on wall, all as specified.
M&L for preparation of newly plastered surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying two coats of cement base paint over one coat of primer, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.
M&L for complete removal of existing treatment from the old plastered wall surfaces, including sides and soffits of beams, fascias, parapets etc and applying two coats of cement base paint over one coat of primer, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed by the Engineer-in-Charge
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 Sqm but n exc 4.00 Sqm each complete all as specified and as directed by the Engineer-in-Charge.
Taking down partition work of any decription & of any size, complete all as specified.
M&L for Pressed steel frames 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, lock strike plates complete, providing mild steel 6 mm dia thresh old bar, thickness of sheet 1.25 mm and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete, all as specified.
S&F 30 mm thick first class hardwood plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed.
S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete.
S&F 150 mm long aluminium anodised, handle of extruded section fabricated type anodised and fixed complete all as specified and directed.
S&F 150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed by Engineer-in-Charge.
S&F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing factory made steel window box type using ERW hollow 'P' section comprising side hung double leaf shutters for and including wire gauged and glazed Skeleton shutter jointed internally with flat iron of size 40 mm x 4 mm, with grill of 8 mm square bars, fixed horizontally @ 10 cm c/c, hinges, handle, tower bolts, stops, hold fast etc. complete all as specified and directed. Note:- Wire gauge & Glazing will be measured & paid seperatly.
S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty / wooden beads in square or rectangular in section, n exc 0.5 sqm in each pane, complete all as specified and directed.
M&L for galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack or galvanised wire staples or fixed with nails and wooden beads, complete all as specified and directed.
M&L for preparation of new or previously untreated wood and wood based surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer (any tint), complete all as specified.
S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per directions of Engineer-in-Charge.
S&F aluminium door shutters with powder coating (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., all as specified
S&F aluminium composite panels, 3.5 mm thick as in doors, of any colour, shape, size and design fixed on aluminium frame work including all necessary fittings and fixtures and necessary taping, complete all as per manufacturer's instructions, complete all as specified.
S&F 5.5 mm thick sheet glass, ordinary quality with and glazing with glazing clips in squares exceeding 0.5 Sqm in each pane, all as specified.
Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including rubbish off the premises, all as specified..
M&L 20 mm thick screed or bedding layer in cement mortar (1:6) for laying floor finishes, complete all as specified.
M&L for 10 mm thick rendring / backing coat in cement mortar (1:4) to receive wall tiles, complete all as specified.
M&L for coloured glazed ceramic tiles in vertical surfaces of size 450 x 300 x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified.
M&L for machine cut & machine polished kota stone slab flooring 40-50 mm thick over screed bed or bedding layer and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing, complete all as specified and directed.
M&L for machine cut & machine polished kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing, complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, all as specified and directed.
S&F snap grid for false ceiling of size 600 mm x 600 mm grid EXPOSED GRID SYSTEM fabricated with glavanised iron powder coated section all as shown on serial page No 185 of SSR part II (2020 print) complete all as specified directed by the Engineer-in-Charge.
M&L for Providing and fixing Gypsum tiles of size 600 mm x 600 mm x 12 mm thick in false ceiling fixed or laid / inserted to GI framework with screw or as per manufacturers instructions, complete all as specified and directed by Engr-in-Charge.
M&L for preparation of surface of gypsum board and applying two coat oil bound distemper over one coat primer and 2 mm thick cement base putty complete all as specified and directed by Engr-in-Charge.
Dismantling of Plain or corrugated steel sheeting any gauge, thickness, in roof coverings including ridges, hips, valleys and flashings etc complete all as specified and as directed by Engineer-in-Charge.
S&F Galvanised, corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with hooks L type or J type or cranked hook bolts , in roofs, walls etc with grade of zinc coating 275, Complete.
S & F Plain, galvanised, mild steel sheeting, 0.63 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, Complete.
M&L for Preparation of new zinc (or galvanised) steel and iron roof surfaces of any description over 10 cm width or girth to receive painting, by coating with mordant solution including washing and cleaning, etc and applying two coat of synthetic enamel paint over one coat red oxide primer in camouflage pattern complete all as specified and directed by Engineer-in-Charge
Dismantling timber scantling, 40 Sqcm and over in section in any position including rafters and purlins framed work, complete all as specified and directed..
S&F second class hard wood and scantling timber framed and fixed wrought, complete all as specified and directed.
Material & Labour for point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn and including PVC rigid conduit not less than 20 mm dia, including all accessories like bend, tees, junction boxes etc., 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc and including sunken type pressed steel terminal box of suitable size with laminated white top sheet cover of 3.00 mm thick complete. Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)
All as per item No 43 above but point wiring for one 5 Amps socket outlet on same board controlled by one-way switch.
All as per item No 43 above but wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch.
M&L Switch Piano type, single pole, one way 6 amp, 230 V, including connecting complete.
M&L Switch Piano type, single pole, one way 16 amp, 230 V, including connecting complete.
M&L for socket outlet 6A- 230 V, 2/3 pin combined including connecting complete.
M&L for socket outlet 16A- 230 V, 3 pin 5 amps cum 3 pin 16 amps combined including connecting complete.
S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 8 way TPN suitable for MCB DB's 415 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed.
Supply and fix MCB’s single pole 6-32 Amps, 250 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.
Supply and fix MCB’s triple pole, 40 Amps, 415 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.
S&F energy efficient LED tube light fitting with built in LED & integral LED driver 18 to 20 watt, channel housing & diffuser of length 1200 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.
Material and labour for renewal earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to galvanized steel wire 4 mm dia by means of bolts nuts check nuts and washer of galvanized steel, watering pipe of 20 mm bore, galvanised iron, light grade, and 15 mm bore galvanised iron light grade for earth wire protection including all excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 and RCC 1:2:4, type B1 for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing on completion. Note:- Quoted rates shall be deemed to include for earth wire with protection pipe up to 7.5 M length.
Material & Labour for TPN sub main wiring with 3 run single core multistranded copper conductor cable, of size 4.0 Sqmm, PVC insulated, unsheathed, fire retardant low smoke, drawn through and including heavy duty rigid PVC conduit not less than 20 mm dia with all necessary fitting and including one run single core multistranded copper conductor cable, of size 6.0 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling, complete. Note: (i) 3 Runs of main cable and one run earth wire with conduit will be measured as one Unit for payment.
Supply and fix sheet metal enclosures with socket plug top 3-pole and neutral enclosure with a three pin and earth plug socket complete with one triple pole MCB of capacity 240 volts 20 Amps
Supply and laying XLPE insulated PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor 1100 volt grade of size 16 Sqmm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole, connecting and testing, complete.
MEGA CONCRETE CONSTRUCTION ENGINEERS AND CONTRACTORS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .