Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.1 Cr
EMD Value
₹2.2 L
Closing Date
4 Dec 2026, 12:30 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
ELECTRICAL
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB of GCC-April-2022 along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer shall posses the valid Electrical Contractor's license and Supervisory License issued by any State/Central Govt. licensing board for the required voltage level or above with their tender paper. Tenders without valid electrical contractor's license & Supervisory license will summarily be rejected.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Definition Of Similar Work : - 1.Erection of 11KV or above voltage level sub-station.OR2.Erection and commissioning of 11KV or above voltage level line (over head or underground.
32 conditions · 6 needing a document upload
Scanned copy of PAN (Permanent Account Number) and Goods and Services Tax Registration Certificate indicating GSTIN should be uploaded. In case of non-availability / non-applicability of any of these documents, reasons should be furnished under 'Remarks'. GSTIN along with other details required under CGST/SGST/UTGST/IGST Act may also be submitted by the successful tenderer immediately after the award of contract.
Scanned copy of EPFO registration certificate and ESIC registration certificate should be uploaded along with tender offer.
In case the tenderer is a partnership firm, an undertaking by all partners of the firm shall be uploaded in compliance to clause no.18.11(iii) of Tender Form (Second sheet) in the prescribed format as per Annexure-10 of the attached document with description 'Formats to be Used'. In case the tenderer is a Sole Proprietorship Firm / HUF / Registered Company, an undertaking shall be uploaded in compliance to clause no.14 (ii)- (a) / (b) / (e) of Tender Form (Second sheet) in the prescribed format as per Annexure-11 of the attached document with description 'Formats to be Used'. In case the tenderer is Registered LLP, an undertaking shall be uploaded in compliance to clause no.14 (ii)- (f) of Tender Form (Second sheet) in the prescribed format as per Annexure-12 of the attached document with description 'Formats to be Used'.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Attested copies of the documents pertaining to constitution of the concern (Sole Proprietorship Firm / Partnership Firm /Registered Company/ Registered Trust / Registered Society /HUF etc.) as described in detail at clause no.14 of Tender Form (Second Sheet) of GCC 2022 as well as legal competency of the person signing the tender offer (Power of Attorney) should be uploaded clearly indicating the nature of the firm. Power of attorney shall be submitted even if the person signing on behalf of the tenderer is authorized for that purpose through partnership deed / Memorandum of Understanding / Article of Association or such other document, failing which tender is liable to be rejected. Sole proprietorship firm shall have to submit notarized copy of the affidavit. In case the tender is signed and submitted by the proprietor himself /herseIf, no power of attorney is required. Railway reserves the right to legally scrutinize original copies of such documents as and when required. After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted.
The tenderer will have to make payment towards Earnest money deposit (EMD) against this tender through online payment modes like net banking, debit/ credit cards etc. available on IREPS portal (www.ireps.gov.in). The tenderer is required to pay the Earnest Money deposit before he can prepare and submit his bid. Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of Earnest Money on submission of Registration Certificate issued by appropriate authority. 100% Govt. owned PSUs shall be exempted from payment of earnest money deposit. Labour Cooperative Societies shall deposit only 50% of above earnest money deposit on submission of necessary documents.
In support of their credentials, the Tenderers should submit along with their tenders document - List of Plant and Machinery available on hand (own/hired) and proposed to be inducted (own/ hired) to be given separately for the subject work .
The Earnest Money and Cost of tender booklet : There is one mode for submssion of EMD through online payment. The bidders will have to make payment towards tender document cost and earnest money against the tender through online payment modes like net banking, debit/ credit cards etc. available on IREPS portal in favour of FA & CAO, ECR, Hajipur payable at Hajipur executed by State Bank of India or any of the Nationalized Banks or Scheduled Bank.
Eligibility criteria for works tender in respect of partnership firms:-
in case the tenderer is a partnership firm s , the experience, solvency and turn over shall be in the name and style of the firm only.
If the tenderer is a partnership firm, all the partners shall be jointly and severally liable for successful completion of the work and no request for change on the certification of the firm shall be entertained.
During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as breach of trust and abandonment of the contract.
JOINT VENTURE will not be permitted for the tenders.
Any Conditional offer will be summarily rejected.
Rates are inclusive of all taxes/GST, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
Earnest Money and Tender Document Cost: -All the tenderers / Contractors have to deposit full earnest money and tender document cost as stipulated in the tender document through online modes as permitted in IREPS application.
After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted.
Tenderers shall note that the submission of supporting documents at the time of on line bidding of tender, is important and they shall ensure the same. However Railways may seek clarification/details/documents in this regard.
Before submitting the offer, please read carefully complete e- tender document including annexed document, Standard General Condition of Contract. Special Condition of Contract, bill of quantities etc. Your digital signature on the etender form will be considered as your confirmation that you have read and accepted all the condition laid down in the document stated above.
This contract shall be governed by "Indian Railways General Condition of Contract, April-2022" which is uploaded with up to date correction slips (if any).However, tenderers need not upload the same along with their bid. Tenderers are responsible for knowledge of GCC and its amendment.
(i) Electrical work in connection with Provision of Infrastructural and Mechanical Facility Development for Washing Pit at Lalitgram. (ii) Electrical work in connection with Provision of Sick Line with Shed at Lalit Gram Station (LLP)
EL-G-SPJ-28-ET-26-27~ECR
EL-G-SPJ-28-ET-26-27
Open
Works - General
180 Days
Samastipur, Bihar
₹0
₹2.2 L
12 Nov 2026
12 Nov 2026
20 Nov 2026
202 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 74,09,520.44 | ||
| — | 80.00 | — | — | ||
| Wiring of 5 amp. point single core 1.5 sq mm copper wire on platform surface trusses including supply and fixing of ceiling rose board, fuse kitkat, indicator and connection etc with all other accessories complete in all respect. PVC board make - Cany/classic/Harson. Ceiling rose fuse kit-kat, Indicator make - Havells, HPL, Cona. | — | — | — | 12,160 | |
| — | 120.00 | — | — | ||
| Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable insurface/recessed medium class PVC conduit,with modular switch, modular plate, suitable GIbox and earthing the point with 1.5 sq.mmFRLS PVC insulated copper conductor singlecore cable etc. as required. copper cable/wiremake - Havells, Finolex, Anchor,Polycab,KEI.PVC pipe make - Malhotra, Bansal, Jyotiplast,Simplex. | — | — | — | 38,896.8 | |
| — | 600.00 | — | — | ||
| Wiring of sub-main Concealed/ surface(Normallyconcealed) in heavy gauge 2 mm PVC conduitpipe with single core PVC insulated multi strandcopper conductor cable 2 x 2.5 sq. mm multistrand (36/0.3 No./Nominal dia of wire in mm.)for phase and neutral and 1 X 2.5 Sq. mm cablefor earth. The colour coding of cable red forphase, black for neutral and green for earthmust be maintain .The rates per meter includesPVC pipe 1 meter length and 03 nos 1 metercopper wire with other accessories, if more thantwo wires are required to be drawn for othercircuit than higher size pipes are to be used orseparate pipe as required as per siterequirement. copper cable/wire make - Havells, Finolex, Anchor,Polycab,KEI. PVC pipe make -Malhotra, Bansal, Jyotiplast, Simplex. | — | — | — | 32,424 | |
| — | 300.00 | — | — | ||
| Wiring of sub main concealed / surface (Normally concealed) in heavy gauge 2 mm PVCconduit pipe with single core PVC insulated multi strand copper conductor cable 2 x 4 sq.mm multi strand (56/0.3 No./Nominal dia ofwire in mm.) for phase and neutral and 1 x 4 Sq. mm cable for earth. The colour oding ofcable red for phase ,black for neutral and greenfor earth must be maintain. The rates per meterincludes PVC pipe 01 meter length and 03 nos 1meter copper wire with other accessories. Ifmore than three wires are required to be drawnfor other circuit than higher size pipes are to beused or separate pipe as required as per siterequirement. copper cable make - Havells,Finolex, Anchor, Polycab,KEI', R R Kabel. PVCpipe make - Malhotra, Bansal,Jyotiplast,Simplex. | — | — | — | 18,639 | |
| — | 200.00 | — | — | ||
| Wiring of sub main concealed / surface (Normally concealed) in heavy gauge 2 mm PVCconduit pipe with single core PVC insulatedmulti strand copper conductor cable 2 x 10 sq.mm multi strand (56/0.3 No./Nominal dia ofwire in mm.) for phase and neutral and 1 x 10Sq. mm cable for earth. The colour coding ofcable red for phase ,black for neutral and greenfor earth must be maintain. The rates per meterincludes PVC pipe 01 meter length and 03 nos 1meter copper wire with other accessories. Ifmore than three wires are required to be drawnfor other circuit than higher size pipes are to beused or separate pipe as required as per siterequirement. copper cable/wire make - Havells,Finolex, Anchor,Polycab,KEI. PVC pipe make -Malhotra, Bansal, Jyotiplast, Simplex. | — | — | — | 23,770 | |
| — | 20.00 | — | — | ||
| Supplying and fixing of 15/16 A modular switch on the existing modular plate & switch boxincluding connections but excluding modularetc. as required. Make - Havells,Anchor, Cona. | — | — | — | 1,685.6 | |
| — | 20.00 | — | — | ||
| Supplying and fixing of 6 pin 15/16 A modular socket outlet on the existing modular plate & switch box including connections but excluding modular etc. as required. Make - Havells,Anchor, Cona. | — | — | — | 2,128.4 | |
| — | 10.00 | — | — | ||
| Supplying and fixing of 6 Module (200mmx75mm) ,GI box along withy modularbase & cover plate for modular switches inrecess etc. as required. Make - Havells,Anchor,Cona. | — | — | — | 2,193.7 | |
| — | 10.00 | — | — | ||
| Supplying and fixing of 12 Module (200mmx200mm) ,GI box along with modular base & cover plate for modular switches inrecess etc. as required. Make - Havells,Anchor,Cona. | — | — | — | 2,984.9 | |
| — | 20.00 | — | — | ||
| Supplying and fixing suitable size GI box with modular plate and cover in front on surface orin recess, including providing and fixing 6 pin5/6 & 15/16 A modular socket outlet and 15/16A modular switch, connections etc. as required.Make - Havells, Anchor, Cona. | — | — | — | 6,395.4 | |
| — | 20.00 | — | — | ||
| Supplying and fixing suitable size GI box with modular plate and cover in front on surface orin recess, including providing and fixing 3/5 pin5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Make -Havells, Anchor, Cona. | — | — | — | 5,153.8 | |
| — | 20.00 | — | — | ||
| Supply and Fixing of copper pipe of condenser coil during installation/ shifting of split AC1.5/2.0 ton capacity. | — | — | — | 1,430.2 | |
| — | 20.00 | — | — | ||
| Installation, connection, testing &commissioning of ceiling fan and regulator including all accessories as per site requirement. (Fan and regulator will be suppliedby Railway.) | — | — | — | 183.8 | |
| — | 10.00 | — | — | ||
| Installation ,testing & commissioning of Exhaust fan with required material such as nut bolt,connection cable etc. as per instruction of site incharge. | — | — | — | 248.5 | |
| — | 2.00 | — | — | ||
| Installation ,testing & commissioning of 25 Liter Gyser with nut bolt with other accessories(Inner pipe, outer pipe etc) as per requirement of site& instruction of site incharge. | — | — | — | 1,348.2 | |
| — | 2.00 | — | — | ||
| Installaion ,testing & commissioning of watercooler 150 ltr capacity with nut bolt with other accessories (inner pipe,outer pipe etc) as per requirement of site instruction of site charge. | — | — | — | 1,878.76 | |
| — | 40.00 | — | — | ||
| Fixing and supply of LED street light 60 W energy saving and environmental friendly long life LED street light made up of pressure diccast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 on pole/wall with suitable size G.I. Pipe of medium gauge smooth bend with 120 degree (2) feet + 1 feet) long, MS clamp, Nut bolt etc, as required, Kit- kat fuse16amp in suitable size MS box should beprovided with G.I. pipe. Wiring/connection of fitting and kit-kat fuse will be done with not less than 2.5 sq.mm aluminium wire through G.I.pipes and PVC flexible pipes complete in allrespect. Similar to Havells cat. no.ENDURAPEARLNEOSL60 WLED757PAS YTOPC. Make of Luminaire, Philips, Havells, Bajaj,Crompton. LED Luminaire warranty Will be supplied by railway) LED Luminaire warranty period will be 05 years. | — | — | — | 1,39,840 | |
| — | 160.00 | — | — | ||
| Installation, testing, commissioning and Supplyof 2x18 W LED (4 ft) indoor tube light fittingwith LED tube voltage range 90v-300v AC.Wiring/ connection of fitting with not less than1.5 sq.mm cu. Similar to Havells batten cat no.REGALBATTENTSUPTO2X22W SSBSWH and tubecat. no. PHOTONULTRAE2.01213T8SSTL18WLED865SPC. Wire through PVC flexible pipes.Fixing of fitting with aluminium. clamps andsteel nut- bolts. Luminaire warranty period willbe five years from the date of installation. Make of luminaire - Philips, Havells, Bajaj, Crompton,Greatwhite. | — | — | — | 1,29,656 | |
| — | 20.00 | — | — | ||
| Installation, testing, commissioning and supply of 36W LED (2'x2') ultra modern Slim recess mounting luminaire with high performance LEDs, suitable for mounting with armstrong/Grid ceiling (35 mm hieght). Wiring/connection of fitting with not less than 1.5 sq.mm cu. Similar to Havells batten cat no. VENUSNEO2x2PLR36WLED857G2. Wire through PVC flexible pipes. Fixing of fitting with aluminium clamps and steel nut-bolts. Luminaire warranty period will be five years from the date of installation. Make of luminaire- Philips, Havells, Bajaj, Crimpton, C & S. | — | — | — | 65,728 | |
| — | 200.00 | — | — | ||
| Installation. Testing,commissioning and Supply of 20W LED (4ft) inverter LED battenwith square profile andpolycarbonate channel lithium ionbattery with charging time 8 hours- 10 hours and back up time upto4 hours indoor tube light fitting.Wiring/connection of fitting withnot less than 1.5 sq mm cu.Similar to Havells cat no.LHEXACO7ENIW020. Wire throughPVC flexible pipes. Fixing of fittingwith aluminium clamps and steelnut-bolts. Luminaire warrantyperiod will be five years from thedate of installation. Make ofluminaire - Philips, Havells, Bajaj,Crompton, C&S. | — | — | — | 1,17,990 | |
| — | 900.00 | — | — | ||
| Supply of LT XLPE 4x70 sq mm aluminium armoured cable as per IS 7098 (Part 1) 1988. Make -Havells, KEI, Polycab or similar. | — | — | — | 3,59,100 | |
| — | 500.00 | — | — | ||
| HDD cabling including cost of hiring of HDD machine at site (Cable will be supplied by Railway) including handling of stores materials,preparation of site and boringfor placing of 100mm inner dia HDPE/ DWC pipe for crossing of HT/LT XLPE cable together at Bridges/ Culverts/Track/ Pucca road crossing. Boring trench shall be minimum 3 mtr below the river bed and 1 mtr belowTrack/Road/Pucca Road crossing area. This includes supply of HDPE/DWC pipe sand accessories as per requirement of site and cost of fuel & all other items which will be required for laying of cable through it. The work shall be executed as per instruction of site engineer. (a)Boring up tolength 150 mtr. | — | — | — | 3,87,140 | |
| — | 400.00 | — | — | ||
| Laying and fixing one no. XLPE/PVC AluminiumConductor 1100 Volt grade of size exceeding 25sq mm but not exceeding 120 sq mm on surface/wall/rail pole through GI pipe as per siterequired. (Cable will be supplied by Rly.) | — | — | — | 5,836 | |
| — | 800.00 | — | — | ||
| Laying and fixing of one number XLPE Cable1100V grade of size exceeding 25 Sq.mm directin ground one meter depth including excavation,sand cushioning ,and refilling to trench asrequired. (cable will be supplied by railway) | — | — | — | 25,496 | |
| — | 800.00 | — | — | ||
| Laying of one no. additional PVC insulated and PVC sheathed/XLPE cable of 1100V grade up to120 sq. mm direct in ground including excavation, sand cushioning protective coveringand refilling of trench as required. (cable will b esupplied by railway) | — | — | — | 13,832 | |
| — | 40.00 | — | — | ||
| Installation,testing, commissioning and supplyof DBOXx MCB protected power unit 16/25Amp. 240 volt with sheet steel enclosure16/25A MCB DBOXx MCB protected power unitHSN Code: 8536. Make - Havells, L&T, Legrand. | — | — | — | 19,055.6 | |
| — | 4.00 | — | — | ||
| Supplying and fixing 16 way double door, single pole and neutral , sheet steel, MCB distribution board, 240V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, interconnections, powder paintedincluding earthing etc as required.(But without MCB/ RCCB/Isolator). Make-L&T,ABB,Schenieder, BCH, C&S,Havells. | — | — | — | 9,046.08 | |
| — | 105.00 | — | — | ||
| Supplying and fixing 5A to 32A rating,240/415V, 10kA,'C' curve, miniature circuitbraker suitable for inductive load of single polein the existing MCB DB complete withconnections, testing and commissioning etc asrequired. Make- L&T,ABB,Schenieder, BCH,C&S,Havells. | — | — | — | 19,353.6 | |
| — | 10.00 | — | — | ||
| Supplying and fixing 40 A rating, double pole,240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc as required. Make-L&T, ABB, Schenieder, BCH, C&S, Havells. | — | — | — | 3,132 | |
| — | 20.00 | — | — | ||
| Provision of earthing with G.I. earth pipe 4.5mtr long , 40 mm dia including accessories withcharcoal and salt as required and providingmasonary foundation work, wateringarangement etc. Pipe make - Tata,Jindal, Bansal. | — | — | — | 21,609.2 | |
| — | 200.00 | — | — | ||
| Providing and fixing 06 SWG dia G.I. wire onsurface or in recess for loop earthing along with existing surface/ recessed conduit/sub main wiring/cable. | — | — | — | 972 | |
| — | 1.00 | — | — | ||
| provision of fabrication.Installation testing &commissioning of LT panel boardfabricated of 14 SWG MS sheetmetal fabricated dust and verminproof cubical type complete withbus bar enclosed wall mountingincluding painting with 02 coats ofsynthetic paint equipped. fittedand connection to feeders/busbars with MCCB 4 pole 200Amp.Breacking capacity 50kA-01 no. (as coming) 100 Amp MCCB fourpole breaking capacity 50KA -02nos & 63 Amp four pole MCCBbreaking capacity 50KA -02 nos.(as out going) with ammeter ' 0-100A' -05 nos. Voltmeter (0- 500)LED indication lamp (RYB) -03nos. HRC fuse -01 no, copper busbar 20 kg on the pre - fabricatedLT panel. Make of MCCB - Havells,L&T, ABB, Legrand. | — | — | — | 63,396.1 | |
| — | 20.00 | — | — | ||
| Installation, Testing, commissioning and supply of switch disconnector fuse unit capacity 100 amp. 415 volt triple pole, neutral link with rewirable porcelain fuse units AC confirms to IS:13947(part I&III) in sheet steel enclosure similar to Havells cat. no. IHKDTW4100 Make- Havells, L&T, HPL, Suntex. Switch will be installed/mounted on the pole/wall with MS Clalmp, bracket, Sheet, Nut bolt etc including masonry work if required and supply of all required material for fixing. | — | — | — | 1,12,548.2 | |
| — | 10.00 | — | — | ||
| Supply of MCCB 63 Amp. Double pole 240 V AC, 50Hz/60Hz, DC 10kA (Cat No. EM90982OOHO) Make - L & T or similar . | — | — | — | 17,800 | |
| — | 200.00 | — | — | ||
| Supply, laying and fixing of GI pipe of 75 mmdia for laying the cable across the road/drain/post'B' class. Make-Tata/Jindal/Bansal | — | — | — | 76,448 | |
| — | 1.00 | — | — | ||
| Fabrication, supply, installation, testing and commissioning of outdoor type compact Substation (CSS) consisting of maintenance free transformer of 500 KVA, 11KV/750V, 3-phase including VCB with all protection and metering relay on HT side of Transformer with inbuilt LT panel as per site and HT and LT cabling work as per the following details : A) HT SWITCHGEAR (Conforming to IEC-62271/200) 11KV, 630Amps, 3-phase, 21KA for 3 Sec. SF6 Gas Insulated Copper Busbar Non- Extensible Compact switchgear (Safe Ring Type: CV+M) with Copper busbar type consisting of One No. Fixed Manual Load Break Switch and One No. Fixed Manual Vacuum Circuit Breaker with series trip, self-powered microprocessor based numerical over current relay (IDMTL + Inst.) Protection along with 11KV Metering Cubical of Class 1.0 Accuracy. Relay shall be Ashida make ADR241s or similar with communication Port RS485. ( 50,50N,51,51N) -1No. Protection CT - 40/1A, 2.5VA, Class - 5P10 -1 Set. Metering CT - 50/1A, 2.5VA, Class - 1.0 Accuracy-1 Set. Metering PT- 11000V/3 / 110/3, 50VA, Class - 1.0 Accuracy- 1 Set. Digital Voltmeter with accuacy class 1.0 -1 No. Digital Multifunction Meter with accuracy class 1.0 Voltage Presence Indication for Incoming Supply healthy indication -1 Set, Manometer 1 No. B) TRANSFORMER: 500 KVA 11KV/750V, 3-phase, DYn11 Copper Wounded Cast Resin Dry Type Transformer, Class H Insulation, Temp Rise 90 Deg Centigrade over an ambient of 50 Deg C, Transformer tapings +5% to -5% @ 2.5% per step, % Impedance: 4.5%. WTI Scanner with Alarm and trip contact 1 No. Conforming to IS/IEC-11171/ IEC 60076-11:2018 or latest. C) LOW VOLTAGE SWITCHGEAR - 800A Copper BUSBAR as per standard rated INCOMER FROM TRANSFORMER 630Amps, 750V, 4P, 50kA MDO Type Air Circuit Breaker (ACB) with Microprocessor based release-02 set including over current, short circuit and earth fault protection. RYB- ON OFF TRIP Indication- 01 Set. Digital Multifunction Meter of Class 1.0 Accuracy with RS 485 Port: 1 No. Conforming toIEC-62271/100. D) OUTDOOR ENCLOSURE- Outdoor type enclosure having construction of Galvanized Sheet Steel of thickness 2 mm for Load bearing member and 1.6 mm for Non Load bearing member. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP23 degree of protection for Transformer compartment. The enclosure exterior shall be Powder Coated (Colour Light Gray & D.A. Gray). Each compartment will be provided with the door and pad locking arrangement. The Compartment illumination lamp with door operated switch shall be provided for MV and LV compartment. Door Interlock to trip HT breaker on Opening of transformer compartment door to be provided. E) INTER CONNECTION AND EARTHING - Interconnection Between HT switchgear to Transformer shall be using 3C, 120 Sq mm HT Aluminum Cable. Inter connection between Transformer & LT switch gear using Aluminum Busbars. Internal earthing connections by using 50x6 mm GI Strips shall provided including Transformer Neutral earthing. The CSS shall be complete in all respect with its Foundation base as per the manufacturer drawing. Only OEM make CSS will be accepted. Make : CG , ABB , Scheinider ,Alsthom , Siemens , L&T. Inspection by RITES. | — | — | — | 44,19,000 | |
| — | 2.00 | — | — | ||
| Design, fabrication, supply, erection (with foundation ) testing and commissioning of weatherproof, IP-55 Feeder pillar, panel enclosures to be treated through seven tank process for superior corrision resistance and weather proofing powder/ epoxy coating to be provided for protection as well as to provide and elegant finish to the panels. Neoprene rubber gaskitting to be provided for dust proofing, wiring is to be done by multistrand, flexible copper conductor with identification feruled insulated socket, lugs, wire arness/looms to be bunched and harried on saddles for mechanical protection with terminals to have ample space for ease of cabling. Each component to be fully accessible for maintenance and reliability including panel inter connection nuts and bolts etc. , each consisting of two no. of 400A/750V MCCB and 02 nos female ZS coupler (01 no. on front and other on back side of panel ) with suitable Digital Ammeter, Digital Voltmeter , LED phase indicator Lamp RYB colour, HRC fuse, Selector switch , copper busbar etc. MCCB Make - ABB,Havells,L&T, Siemens." | — | — | — | 2,29,788 | |
| — | 2.00 | — | — | ||
| Installation, testing and commissioning of 500 KVA, 11/0.4 KV including making of transformer foundation Size Length 1800 mm X width 1800 mm X height 900 mm with side wall 25 mm brick and proper ramp as per site incharge instruction for smoothly loading and unloading of transformer. The top of Foundation including ramp will be made 100 mm thickness of RCC work. | — | — | — | 47,500 | |
| — | 2.00 | — | — | ||
| Provision, Fabrication and commissioning of 11 KV 3 phase Gang Operated Switch on the top portion of pre-erected H - pole/4 pole structure capacity - 400 Amp conforming to IS : 1818 complete with drop out fuse conforming to ISS- 9835 (Pt.II) of 1980 along with mounting channel/angle iron insulator etc. all respect including supply of all required material. | — | — | — | 14,060 | |
| — | 2.00 | — | — | ||
| Provision, Fabrication and commissioning three piece nonlinear resistor type lightning arrester at required site on the top portion of pre-erected H - pole/4 pole structure suitable for 3 wire,11kV overhead lines with rated voltage 9 kV (rms) with a nominal discharge current rating of 5 kA and complete with galvanized clamping arrangement , G.I. bolts, nuts, washers etc.as required including supply of all material. Each set of LA will consist with 3 nos. | — | — | — | 10,070 | |
| — | 10.00 | — | — | ||
| Provision and fixing of 11 KV Pin Insulator at required site on the top portion of pre- erected pole complete with large steel head G.I. pin, nuts, washers etc. as required conforming to IS- 731/1971 including supply of all required material for fixing with insulator. Insulator Make- Kay or similar make approved by Sr. DEE/SPJ. | — | — | — | 1,900 | |
| — | 9.00 | — | — | ||
| Provision and fixing of 11 KV Disc Insulator at required site on the top portion of pre- eracted pole for 11KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts,nuts washers etc as required including supply of all required material for fixing with insulator. ( The tension clamp should be of suitable size and conform to ISI specification). Insulator Make- Kay or similar make approved by Sr.DEE/SPJ. | — | — | — | 5,130 | |
| — | 2.00 | — | — | ||
| Supply of 11mtr high mast system totally hot dip galvanized having in One Section, Top dia 100mm, bottom dia 360mm and Sheet thickness 3mm, PCD - 445 MM, suitable for 50m/sec. wind velocity as per IS 875 Part 3 along with head frame, luminaries carriage suitable to install 06 nos. of luminaries in symmetrical arrangement and accessories required such as supply of raising lowering system of 11 M high mast comprising Single Gear Double drum (SGDD), 7/19 construction, 5mm diameter SS wire rope having Two Wire Rope System, trailing cable, connector, integral power tool motor, manual handle, junction box etc. Make- TRANSRAIL, Bajaj, Surya, crompton, VALMONT. | — | — | — | 1,27,584.6 | |
| — | 2.00 | — | — | ||
| Supply of foundation bolts M24 X 850MM, TS 600, manufactured from special steel along with nuts, washers, anchor plates and templates. | — | — | — | 10,632.04 | |
| — | 12.00 | — | — | ||
| Fixing, connection and supply of LED Flood Light 250 Watt Energy saving, environmental friendly, long life, exclusive innovative die cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting. Similar to Bajaj GLEAM F 275L WH SY PC SD V2- 113984 (LED Light Warranty will be five Years) Make- Havells, C&S, Philips, Bajaj. | — | — | — | 70,171.56 | |
| — | 2.00 | — | — | ||
| Supply of LED type single dome aviation obstruction light. Make- Transrail, Bajaj, Surya. | — | — | — | 4,252.82 | |
| — | 2.00 | — | — | ||
| Supply of feeder panel comprising main incoming 32A, TPN, MCB, auto time switch, 25A TP contractor, reversing starter and protective system etc as required for operation of high mast system complete and raise lower push button, Incoming 35sq.mm and outgoing 16 & 2.5 sq.mm terminals. Make-Havells. Anchor, HPL. | — | — | — | 25,516.92 | |
| — | 2.00 | — | — | ||
| Construction of suitable shallow foundation with 1:2:4 concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sq mtr at 2 meter depth with all materials and labour. | — | — | — | 47,844.26 | |
| — | 2.00 | — | — | ||
| Erection of the high mast with the help of suitable tools and plants, wiring of luminaries with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5sq.mm, lugs, MCB and all labour. | — | — | — | 21,264.1 | |
| — | 2.00 | — | — | ||
| Installation of the outdoor stand mounted feeder pillar by grouting the stand in concrete. | — | — | — | 5,316.04 | |
| — | 2.00 | — | — | ||
| Installation,testing, commissioning and supplyof ON Load four pole change over switch withadvance neutral including SS enclosure currentrating 400 Amp., 415 Volt, 50 Hz, Make - Havells, HPL,L&T. " | — | — | — | 21,669.26 | |
| — | 6.00 | — | — | ||
| Making of Earthing pit 15' deep with Copper plate of size 600 mm x 600 mm x 3.15 mm with its top from ground level complete with 20 mm dia GI pipe fitted with alternate layers charcoal and salt at least 150 mm thick around, funnel for watering and one earthing lead 20 mm x 5 mm copper strip in Gl pipe 30 mm medium gauge, masonry/housing with CI hinged cover plate with locking arrangement complete in all respect. (Copper strip up to ground level to be supplied). | — | — | — | 37,980 | |
| — | 6.00 | — | — | ||
| Fixing, connection, testing & Supply of MCB Distribution Board 4-way 8+12,double door,IP- 43-protection, with supply of MCB 63A, TPN, 10KA, B-Curve, conforms to IS:60898 -02 Nos as incoming & MCB 20A, DP, 10 KA, B-Curve, conforms to IS:60898-06 Nos as outgoing. Make: C&S, L&T, Havells, Legrand (Fixing of Distribution Board to be done as per the site requirement (normally concealed) and connection to be done with suitable conductor including supply of PVC flexible pipe) | — | — | — | 58,297.32 | |
| — | 4.00 | — | — | ||
| Supply and fixing of 4-way MCB DB with 6/32Amp MCI 4 Nos, single polo/02 nos double polein sheet metal enclosed type board completewith all accessories (MCB will be supplied byRailway). Make-Havells, L&T Siemens | — | — | — | 2,100.88 | |
| — | 10.00 | — | — | ||
| Installation, testing,commissioning and supply of Bus bar JB made of Polycarbonate made (shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant, having high impact, made of halogen and silica free recyclable material), UV resistant, having high grade Gasket made of Polyurethane, should with stand glow wise test at 960 deg Celsius,should be flame retardant 100A 4-way Al Busbar Junction Box (wih connector) IP 65.Make-Hensel, C&S, Siemens. | — | — | — | 1,21,440 | |
| — | 30.00 | — | — | ||
| — | 30.00 | — | — | ||
| — | 10.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27.04.22.pdf
ATTACHMENT
ACS01to11_new.pdf
ATTACHMENT
ANX-VVA.pdf
ATTACHMENT
annualturnoverformatCAVIB.pdf
ATTACHMENT
DECLARATIONREGARDINGASSOCIATIONWITHGAZETTEDRAILWAYOFFICERENGINEER-1.pdf
ATTACHMENT
Mandateform.pdf
ATTACHMENT
Letterofcredit.pdf
ATTACHMENT
TenderDocumentLLPF.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .