AS AND AS TO OPERATIONS ROOM COMPLEX P199 AND AS AND AS TO MT SECTION BUILDING NO P19 P20P24 P25 P26 COMPLEX AT INS RAJALI ARAKKONAM

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the permises etc., complete all as specified and as directed by Engr-in-charge.

M & L Granite (of any type) tiles 20mm thick machine cut, bedded in compass rose design pattern and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, with Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete.

M & L 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete with Screed bed or bedding layer of mortar 10 mm thick in CM 1:3 complete.

M & L PVC louvers 6-10 mm thick fixed to existing plywood panels using glue as in wall panelling after removing existing mica from plywood. Width of louver panel 120mm(approx). Complete all as specified and as directed.

M & L PVC louvers 6-10 mm thick fixed on 12mm plywood panels using glue as in wall paneling. Width of PVC louver panel 120mm(approx). .complete all as specified and as directed.

Supply and Fix 12 mm thick Toughned glass clear/tinted as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required.

Supply and Fix 8 mm thick Toughned glass clear/tinted as in partitions and similar work including etching of desired pattern on glass including cutting to shape, drilling holes required, fixing to rails using stainless steel sturd complete all as specifled and directed .

M & L heavy duty single glass door lock suitable for 12mm thick main door, one side knob one side key complete all as specifled and directed

M & L a pair of stainless steel alloy corrosion resistant handle for glass door(size of handle 18 inch) complete all as specifled and directed

M & L stainless steel two way opening floor spring closure suitable for glass door weighing upto 75 Kg complete all as specifled and directed

M & L custom frosted sticker for toughned glass complete all as specifled and directed

M & L for etching work of desired pattern on toughned glass as in doors complete all as specifled and directed

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqm each

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in with CM 1:6 complete all as specified and as directed by Engr-in-charge.

M &L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 including finishing even and smooth without extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall by Vacuumbased sandng machlne, applying wall care putty 1mm (Multipurpose mlxer shall be used for uniform and proper mlxing of putty) and applying One coat of primer and two coat of emulsion distemper white or coloured by auto roller / Airless Sprayer complete all as specifled and directed

M & L Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required as in wall/floor to give high gloss finish complete.

S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified

M &L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S & F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified

M & L 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

75 mm Butt hinges, medium weight, cold rolled mild steel, and fixed

M & L Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg, aluminium (extruded section body) and fixed

S & F for second class hard wood plain fillets , square , rectangular or triangular in section, sectional area exc 13 sqcm and not exc 25 sqcm complete all as specified and as directed by Engr- In- Charge.

M &L 12 mm thick Plywood, grade BWP, type BB fixed with screws to timber frame work complete all as specifled and directed

Dismantling boarding, any description, fixed in any position with nails

S&F 0 degree clip type self closing hinges for cabinets fized with cadimum coated screws all as per sample.

S&F 100mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters

M &L 0.9 - 1.5mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction

Taking down cement plaster on brick work or Concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Integral waterproofing compound

Material and labour for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified .

Material and labour for rendering 5 mm thick in cement mortar 1:3 as in ceiling surfaces, finished fair and evenwithout using extra cement complete all as specified.

M & L for preparation of newly plastered surfaces and applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and propper mixing of putty) and applying two coats of emulsion weather coat white/coloured over a coat of exterior water proof primer by auto roller for upto 10 mtr height as per site requirement complete all as specified and directed as per manufacturer instruction. Note:1) All work shall be carried out by approved applicator of paint manufacture only. The same shall be approved before carrying out the work from GE. 2) Contractor should submit Auth applicator certificate before execution of work. 3) Contractor should submit warrenty certificate for 5 years from manufacturer. 4) Columns, Beams and Chajja to be painted different colour as per direction of Engr-in-Charge

Material and labour for prepration of newly plastered surface of walls applying three coats of white wash complete all as specified .

Material and labour for preparation of newly plastered surfaces and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 3mm thick wall care putty complete all as specified and as directed.

Material and labour for prepration of newly plastered surface of ceiling applying three coats of white wash complete all as specified .

M&L for complete removal of existing treatment from old decorated plastered surfaces by Vacuum based sanding machine, removal of nails etc & filling cracks/hole with putty and applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and propper mixing of putty) and applying two coats of emulsion weather coat white/coloured over a coat of exterior water proof primer by auto roller for upto 10 mtr height as per site requirement complete all as specified and directed as per manufacturer instruction. Note:1) All work shall be carried out by approved applicator of paint manufacture only. The same shall be approved before carrying out the work from GE. 2) Contractor should submit Auth applicator certificate before execution of work. 3) Contractor should submit warrenty certificate for 5 years from manufacturer. 4) Columns, Beams and Chajja to be painted different colour as per direction of Engr-in-Charge

Material and labour for complete removal of existing treatment from old decorated plastered surfaces of walls by Vacuum based sanding machine, removal of nails etc & filling cracks/hole with putty and applying three coats of white wash complete all as specified .

Material and labour for complete removal of existing treatment from old decorated plastered surfaces by Vacuum based sanding machine, removal of nails etc & filling cracks/hole with putty and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 3mm thick wall care putty complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of Ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent walls and trading oil and greasy spots and applying for one coat of white wash complete all as specified and as directed.

Material and labour for one coat of synthetic enamel painting on old painted wooden surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and as directed by Engr-in-charge.

All as per Item No.42 here-in-before but on old painted steel surfaces.

Material and labour for light shade vitrified ceramic coloured tiles10mm thick (square/ rectangular) polished area of each tile n.exc 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-charge.

All as per item No.44 here-in-before but on vertical surfaces over 10mm thick screed plaster in CM 1:4.

Material and labour for Acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors over 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-charge.

All as per item No.46 here-in-before but on vertical surfaces over 10mm thick screed plaster in CM 1:4.

Taking down steel rolling shutters gear operated or manual operated rolling shutters Including guide channel and removing from site and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing complete all as specified and as directed by Engr-in-charge.

Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm but n exc 4 sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.

Supply and fix powder coated anodised sliding/hung type aluminium window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc. complete all as specified and as directed

Supply and fix 4mm thick sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares n exc 0.50 sqm in each pane complete all as specified and as directed.

S & F powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 and minimum thickness of powder coating 50 micron) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised luminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures, PVC conduits and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials from wall/ceiling etc to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into existing concealed conduit through Wall/Ceiling/Flore along with FRLS 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly and including 2 mm thick terminal boxes MS sheet flush mounted with 3 mm thick laminated hylem sheet fixed with camium plated iron screws for mountling switches, socket, fan regulators etc complete for for the following point wiring and making good disturbed surfaces matching with existing paint complete all as specified and as directed. Make of PVC copper conductor cable:- Finlex/Poly cab/ Havells.

One light/fan point controlled by one switch with cable 1.5 Sqmm size..

All as per item ser no-54 above here in before but one 3 pin socket outlet 5 Amps, same board with cables 2.5 Sqmm size.

All as per item ser no-54 above here in before but one 3 pin socket outlet 5 Amps, independent board with cables 2.5 Sqmm size.

All as per item ser no-54 above here in before but one 5 pin socket outlet 5/15 Amps, indipendent board with cables 4.0 Sqmm size.

Material and labour for concelaed point wiring of one light/ceiling fan/exhaust fan point controlled by one switch with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor wire drawn into PVC conduit including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire for shed.

Supply and fixing Modular switch one way 5/6 A white Active one module all as specified and as directed by the Engineer-in-Charge. Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing Modular socket 5 Amp, 2/3 pin Active white two module complete all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing Modular switch one way 16 A white Active one module all as specified and as directed by the Engineer-in-Charge. Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing Modular socket 16 A, 5 pin multi purpose Active white two module complete all as specified and as directed by the Engineer-in-Charge .Make: Havells(Crabtree)/Legrand/Plaza.

S&F Ceiling rose three terminals/ PVC/ polycarbonate, isolated body complete all as specified and as directed by Engr-in-Charge Make: Anchor/ABB/Leader

Taking down existing rusted switch board sunken box from site including removing fixtures and fittings such as switch, socket fan regulator complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces necessary plaster, white wash matches with existing colour of wall, floors, etc. all as specified and as directed.

Supply and fixing in repair of GI metal flush box suitable for mounting moduler plate including removing old rusted metal box from site as per requirement of following modules:-

GI metal flush box, 2 Module

GI metal flush box, 3 Module

GI metal flush box, 4 Module

GI metal flush box, 6 Module

GI metal flush box, 16 Module

Supply and fixing in repair of combined both frame and cover plates fixing on mounting boxes for following modules:-

Cover plate with frame,1 Module

Cover plate with frame,2 Module

Cover plate with frame,3 Module

Cover plate with frame,4 Module

Cover plate with frame,6 Module

Cover plate with frame,16 Module

M&L for cutting chases on brick walls concrete surfaces not exc 10cm girth and making good in cement mortar (1:3) the existing surface after carryiing out the concealed wiring including necessary finishes all as directed by Engr in charge.

Supply and fix in repair high efficiency wall mounted LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one and taken as credit complete all as specified and as directed. (Make:- Philps Cat Part No. BN021C LED20S PSU CDL GR or or Equivalent in Panasonic, C&S, Havells)

Taking down sub main wiring along with earth wire of any sizes

Material and labour for Sub main wiring with Two run single core 4 sqmm for phase and neutral and one run single core 4 sqmm as earth wire with multi stranded copper conductor PVC insulated unsheathed FRLS cable 1100 volts grade confirming to IS-694 continuity conductor drawn into existing concealed conduit or non-metallic rigid PVC conduit of minimum 20 mm dia as per site requirement wiring through wall/cable tray/ceiling/floor/roof etc including conduit accessories complete all as specified and as directed. Notes: (i) The disturbed surfaces shall be made good with existing surface including finishes as applicale. (i) Two different color wires shall be used for phase and neutral . (iii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iv) Three run of 4 Sqmm cable, and one run of PVC conduit will be measured as one unit. Make of cable:- Finlex/Poly cab/ Havells. Make of PVC conduit : Avon plast/ Kon seal / Garware/ Finolex.

All as per item ser no 67 above here in before but four run single core 10 sqmm for phase and neutral and two run for earth single core 10 sqmm as earth wire (ie 6X10 Sq mm)

All as per item ser no-67 above here in before but four run single core 16 sqmm for phase and neutral and two run for earth single core 16 sqmm as earth wire (ie 6X16 Sq mm)

Supply and fix for MCB SP 230 V, 6-32 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-chargeMake: Siemens/Scheneider/ABB/Havels Note : Including taking down old unserviceable.

Supply and fix for MCB SPN 230 V, 40-63 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-charge.Make: Siemens/Scheneider/ABB/Havells Note : Including taking down old unserviceable.

S&F DB for MCB Horizontal TPN 8 way double door DB with 200 amps rated copper bus bar in SS enclosure double door type having IP 43 and IK 09 protection Including taking down old u/s DB and MCB's all as specified and directed . Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule. Make: Legrand/Siemens/Scheneider/ABB/ Havells.

Supply and fix for round/ square surface mounted LED panel luminire not less than 15 warm white with panel and suitable for false ceilling complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make:Surya/Philips/wipro/Havells/Crompton Cat pt LCDSPLN-15-CDL / LSDEP-15-CDL .

Supply and fix for round recessed mounted LED panel luminire not less than 15 watts red colour for operational purpose suitable for false ceilling complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make:Surya/Philips/wipro/Havells/Crompton Cat pt LSDEP-15-CDL / LCDEP-15-CDL .

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC warm white colour, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC warm white colour, surface mounted with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fix wall mounted LED Decorative, wall mounting, stainless steel, rust free fixture with white glass diffuser suitable for 9W LED filament lamp E27 Base complete all as specified and as directed by Engr-in-Charge. Make:Surya/Philips/wipro/Crompton/Havells Cat pt LHFOAJD1TZ1I060/LHFOAJD1TZ1I040 .

Supply and fixing wall mouned swing fan, single phase, 230V of size 300mm complete all as directed by Engr-in- Charge.

supply and erect Stainless Steel Cable Trunking not less then 150mm (Depth),150mm(Width) with 2 mm (Thick) made up of Stainless Steel with coupler plates tee horizontal bend etc with coupler plates,tee,horizontal bend,vertical,etc with neccessery arrangements to fix on wall/floor as per site requirement complete all as specified and as directed.

Supply and fix for flexible Led strips with uniform light distribution and long lasting adhesive for cove lighting of warm white colour (3000K) of not less than 120 LEDs/metre and having not less than 36W per 5 running meter with driver for every 5 running meter and aluminium housing complete all as directed by Engr-in-Charge. Make:Surya/Philips/wipro/Havells/Crompton.Note: Quoted rate including material and labour for making appropriate cutouts in false ceiling/ wood panelling/surafce/wall of any type to fix the light.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into existing concealed conduit through Wall/Ceiling/Flore along with FRLS 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly and including 2 mm thick terminal boxes MS sheet flush mounted with 3 mm thick laminated hylem sheet fixed with camium plated iron screws for mountling switches, socket, fan regulators etc complete for for the following point wiring and making good disturbed surfaces matching with existing paint complete all as specified and as directed. Make of PVC copper conductor cable:- Finlex/Poly cab/ Havells.

All as per item ser no-81 above here in before but one 3 pin socket outlet 5 Amps, independent board with cables 1.5 Sqmm size.

All as per item ser no-81 above here in before but one 5 pin socket outlet 5/15 Amps, indipendent board with cables 2.5 Sqmm size.

Material and labour for point wiring of one 3/5 pin socket outlet 5 Amps, Independent board board with cables 1.5 Sqmm size drawn into PVC conduit for toilet

All as item No 82 above but for one 5 pin socket outlet 5/15 Amps, independent board with cables 2.5 Sqmm size drawn into PVC conduit for toilet

Supply and fixing in repair of Modular step type fan regulator,120 W white Active two module all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing in repair of GI metal flush box suitable for mounting moduler plate including removing old rusted metal box from site as per requirement of following modules:-

GI metal flush box, 8 Module

GI metal flush box, 12 Module

GI metal flush box, 16 Module

Supply and fixing in repair of combined both frame and cover plates fixing on mounting boxes for following modules:-

Cover plate with frame,8 Module

Cover plate with frame,12 Module

S& F for sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one SP MCB 20-32 Amps. Make: Legrand/ Siemens/Scheneider/ABB

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including making hole in exiting brick wall/dismantling brick wall for fixing exhaust fan/ fixing exhaust fan in exisitng glass window complete all as specified and as directed by Engr-in-charge

Supply and fixing in repair of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Supply and fix Energy saving not less than 25 Watts LED light fitting ,IP65 powder coated pressure die cast aluminium high power street light with heatresisant toughened glass with lens by providing GI pipe medium grade 25 mm dia 1.5 Mtr in length with suitable size MS Clamp two nos made out of 25x3 mm FI incl two coat of synthetic enamel paint over a coat of red oxide primer, prewired and including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting and including taking down old u/s damaged all as specified. Note:- Make :Crompton Cat part no:TRP-415-25-57-SL-LM-NBK or equivalent model of Philips/wipro/Havells.

Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and as directed.

Material and labour for Sub main wiring with Two run single core 2.5 sqmm for phase and neutral and one run single core 4 sqmm as earth wire with multi stranded copper conductor PVC insulated unsheathed FRLS cable 1100 volts grade confirming to IS-694 continuity conductor drawn into existing concealed conduit or non-metallic rigid PVC conduit of minimum 20 mm dia as per site requirement wiring through wall/cable tray/ceiling/floor/roof etc including conduit accessories complete all as specified and as directed. Notes: (i) The disturbed surfaces shall be made good with existing surface including finishes as applicale. (i) Two different color wires shall be used for phase and neutral . (iii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iv) Three run of 2.5 Sqmm cable, and one run of PVC conduit will be measured as one unit. Make of cable:- Finlex/Poly cab/ Havells. Make of PVC conduit : Avon plast/ Kon seal / Garware/ Finolex.

S&F DB for MCB SPN DB 4 Way double door DB with 200 amps rated copper bus bar in SS enclosure double door type having IP 43 and IK 09 protection Including taking down old u/s DB and MCB's all as specified and directed . Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule. Make: Legrand/Siemens/Scheneider/ABB/ Havells.

Green Ray Technologies (BID ID -3303337)

SHRI S SANTHAKUMAR (BID ID -3299750)