Modification and Renovation of Quarter Type V I and III at AAI Residential Complex Jorbagh New Delhi.

Amount

Wiring for Group 'B' light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

2 x 1.5 sq. mm

3 x 1.5 sq. mm

4 x 1.5 sq. mm

3 x 4 sq. mm

6 x 4 sq. mm

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps switch

15/16 A switch

3 pin 5/6 amp socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

TV antenna socket outlet

LAN Point (RJ45)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 module (75mm x 75mm) (For TV/Tel/LAN/ AC)

6 Module (200 mmX75 mm) (For TV 2 Switch/2 Socket)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

1 or 2 Module

6 Module

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan (upto 450 mm) in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way, Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door (for UPS/ Inverter Supply)

8 way (4 + 24), Double door (For Power Points)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Single pole and neutral

Supplying and fixing following rating four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63A, RCCB

Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal)size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

Providing, laying and fixing 50 mm dia G.I. pipe (mediumclass) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required

Supplying and fixing of suitable size of telephone distribution (DP) boxes made of 1.6 mm thick GI sheet, powder coated including krone modules with all mounting accessories including necessary termination.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supply of 4 feet long wall mounted, 18-22W range cool milky white LED tube light fixture complete having inbuilt electronic driver alongwith 4 feet long retrofit type T8 LED tube light lamp with aluminium heat sink including internal wiring etc. complete with all accessories as per specifications of tender. (Make: Havells/ Bajaj/ Crompton Greaves/ Halonix/ Philips/ Polycab/ Wipro). (Model No.: REGALBATTENT8UPTO1X22WSSBSWH and TITANIANEO1213T8SSTL18WLED865SPC)

Supply of 2 feet long wall mounted, within 18/20 W range cool milky white LED tube light fixture for mirror with inbuilt electronic driver alongwith LED tube lamp including internal wiring etc. complete with all accessories as per specifications of tender. (Make: Havells, cat no. : LUMILINEBS9WLED865SPCWH or similar in Bajaj/ Crompton Greaves/ Halonix/ Havells/ Philips/ Polycab/ Wipro).

Supply of LED type designer post top lantern light fixture of nominal wattage of 25W (± 10%) having high pressure powder coated die cast aluminium housing with top cover and high impact poly corbonate or acrylic protector/ diffuser and suitable built in LED Driver (SMPS based constant current supply), 120 degree beam angle, efficiency of LED light fittings should be minimum 90 lumens/watt (efficacy), power factor ≥0.95, THD ≤10%, IP 65 or higher, cool day light, high voltage protection against 5 KV surges complete as required etc. as per tender specifications & special conditions complete in all respect etc as required. (Make: Havells, cat no CORALPT25WLED830SSYMTOPC or equivalent as per list of approved make) complete as required or as approved by EIC.

Supply of round type surface mounting 10/12 W LED downlighter light fixture having white powder coated aluminium die cast with heat sink, driver and spring loaded mounting clips including internal wiring etc. complete with all accessories as required at site. (Make: Bajaj/ Crompton Greaves/ Halonix/ Havells/ Philips/ Polycab/ Surya/ Wipro).

Supply of 11 fins Oil filled heater Radiator suitable for 230V, single phase, including louvre for the protection with all the accessories as required. Make: Havells or equivalent.

Supply of 1200mm sweep 230V, single phase, making the electrical connections with all the accessories as required. Make: Crompton model Breez or similar in Havells/ Bajaj/ or as approved by EIC.

Supply & Fixing of 400mm sweep 230V, single phase, 1300-1360rpm Wall mounting fan having power consumption less than 60W, MS ribs guard for protection, pull cord control for speed & oscillation On-Off with all the accessories as required. Make: Havells Swing or equivalent in Bajaj.

Supply of heavy duty pedestal fan of 450 mm sweep, 1400 RPM motor suitable for operation on 230V, 50 Hz A.C. supply having smooth oscillation, outer cage for protection, height adjustment arrangement, heavy base for stability, capacitor etc. complete as required. Make: Havells Model: Sprint Pedestal or equivalent.

Supply & Fixing of 250 mm sweep exhaust fan, 1300-1400rpm, suitable for 230V, single phase, including louvre for the protection with all the accessories as required. Make: Havells Ventil Air DB or equivalent.

Supply & Fixing of 300 mm sweep exhaust fan, 900 rpm, metal body heavy duty, suitable for 230V, single phase, including louvre for the protection with all the accessories as required. Make: Havells Model No.: Turbo Force SP or equivalent.

Supply & fixing of 3.0 litre capacity instant type geyser suitable for working on 240 volts, 50Hz single phase AC supply as required. Make: Havell, model no. GHWAOBPWH003 or equivalent in the CG/ Recold.

Supply & fixing of 25 litre capacity vertical type geyser (minimum 5 star rating) suitable for working on 240 volts, 50Hz single phase AC supply as required. Make: Havell model no. GHWAMGSIB025 or equivalent in the CG/ Recold.

ITC of LED post top lantern by providing 3 core 1.5 sq.mm PVC sheathed round cable from the loop in loop out box to the fitting including connection testing etc. as required at site.

Supply,Installation, Testing and Commissioning of 3 Meter height MS decorative type steel tubular pole, duly primed and painted. The pole shall be painted with MRF Poly urethane paint of approved colour. The bottom and middle embelishment are cast in iron and upper ring are cast in aluminium, fixed to the column by grub screw. The cloumn shall be provided with inbuilt loop box, earth stud with 4 way 25 Amp heavy duty connector, 1 Nos. SP MCB and shall have matching flush door, fabricated & painted complete & making cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone affrefate 40mm nominal size) foundation of size 500mm x 500mm x 700mm depth complete with Supply and fixing 16mm dia 18 inch long hot dip glavanized L-type Anchor bolts, plastering the same with fine sand and having horizontal top surface without any slope including two coats of trump exterior paint complete as required. The pole shall be divided in two sections: Top - Dia 60mm. Length 2000mm (3.2mm thick), Bottom - Dia 114mm. Length 1000mm (4.0mm thick), Base plate - 250mm x 250mm x 10mm thick duly welded to cloumn, (Make-Havells, cat no: 3MECOPOLE or equilalent model of Bajaj) provision of pipe for incoming and outgoing cable etc as reqd. or as approved by EIC at site.

SITC of 8 watt LED type, bollards and making of foundation of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation of size 200 mm dia and 100 mm above ground level and 300 mm below ground level including grouting of suitable size and quantity foundation bolts, cable in & out GI/ HDPE pipe and connection etc as required at site as per the instruction of Engineering-In-Charge (Make: Havells, Cat no. CONEBLS8WLED830PSYMTOPC (0.6 M) )

SITC of 25 W LED Street Light epoxy powder coated high pressure die - cast aluminium housing with weather proof gasket, control gear, toughend glass/ clear polycarbonate front cover, with IP-66 protection and a colour temperature CCT of 5500-6000 K (LED's to be provided with individual lense optics to get optimum optical performance). LED light fixture efficiency should be greater than 90 Lumen/ per watt, power factor ≥0.95, THD ≤10%, integral electronic driver (SMPS based constant current and constant voltage supply) and operating voltage range should be 140- 280V AC and including supplying and fixing of 32 mm dia GI pipe with fastner & clamp and wiring complete with tender specifications. (Make: Havells cat no. ENDURAPEARLSL25WLED757SASYTOPCMP or similar fromlist of approved make)

SITC of 7 watt LED type, pathway lights recessed type etc as required at site as per the instruction of Engineering-In-Charge (Make: Havells, Cat no. RADIANTNEOFT07WLED830SASYMBOPC)

Supply of following sizes of 1.1kv grade multicore Aluminium conductor XLPE insulated PVC sheathed armoured cable (as per IS : 7098:1988 with upto date amendments) complete as requried as per specifications.

3.5 core, 35 Sqmm, Aluminium cable

2 core, 10 Sqmm, Aluminium cable

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Above 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

3½ X 35 sq. mm (32mm)

2 X 10 sq. mm (19mm)

Supply and fixing of 1.5 TR Inverter type, 5 star, Hi- wall, Split air-conditioner with hermetically sealed rotary/ twin rotary/ swing type compressor operating on refrigerant R-410A.The body of indoor unit shall be made of ABS/HIPS/GS & having all safety, air filters, evaporator, condenser, cordless remote, electronic operation control & all accessories supplied with the unit by OEM etc as per manufacturer standards suitable for operation on 230 volts , 50 Hz, Single phase, AC supply, complete with 3.0 mtr refrigerent piping, Electrical cable from outdoor to Indoor etc. as required at site. Make: DAIKIN/ TOSHIBA/O-GENERAL

Supply & fixing of Built in Gas Hob, black glass finish, size 750 x 510 x 50 mm, gas pressure 28-30 mbarof FABER Make, Model no.: HTG 754 CRS BR CI (106,0493,745)

Supply & fixing of Decorative Kitchen Hood, black finish, maximum airflow capacity 1150 m3/hr, air outlet dia 120mm of FABER Make, Model no.: HOOD STILO SLIM 3D PLUS T2S2 BK LTW 90(325.0484.305)

Supply & fixing of Electric Multifunction Built in Oven, 10 Cooking Functions, Electronic Auto Program, Sensor Touch Control, capacity 67L of FABER Make, Model no.: FBIO 67L GLB(116.0471.596) complete as reqd.

Supply & fixing of Faber 32 Litres FBI MWO 32L GLB Built-in Microwave Oven (Stainless Steel) (131.0335.399) AS REQD.

SITC of double Purification of RO + UV / UF to remove Dissolved Impurities of capacity 15.0 ltr per hour water filter complete with 8.0 ltr storage tank, auto flushing, suitable for wall mounted as well as counter top. (make: Kent RO, model no. Pearl)

Supplying, installation, testing and commissioning of 500 LPD non pressurised solar water heater alongwith heating element and 04 Nos.Solar Flat Plate Collector complete as required. Make: V-Guard, Type: PUF, Sr. No. EFL 19, Solar Flat Plate Collector Sr. No. i) STD VG-755, ii) STD VG- 757 , iii) NSTD VG- 250, iv)NSTD VG-265.

SITC of pressure pump complete with pressure tank of 24 ltr capacity,1.0 HP, single phase motor , pressure gauge etc as required at site (make: Crompton, model no. CFMSMB5D1.00-V24 or equivalent)

Supply and installation of 1650 VA inverter, complete with 02 nos. 150 AH lead acid maintenance free tubular battery, suiatble for operation on 240 volts, AC supply including trolley complete as required. (Make Inverter: Luminous/Microtek/Sukam or equivallent, Make Battery: Luminous/Microtek/exide/Sukam or equivallent)

Supply of 01 HP Mono block water pump motors complete as required. Make: Crompton, Model No. ministar, Sr. No. LAFC1RK 3579 & 3862

ANU ENGINEERING CORPORATION

SRS ENGINEERS

MASTER ELECTRIC STORE