GEK-25/2020-21

Amount

Schedule 'A' Section - I

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in deep getting out in hard/dense soil for stay assembly/laying of cable/errection of poles etc complete all as specified and as directed.

All as per Srl item No. 1.00 above but depth exceeding 1.5 m and not exceeding 3 m.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and as directed.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation for filling in, mass concrete for foundation of Pole, Transformer, Panel board, stay, post top lantern, repairs to road cutting, drain, path etc complete all as specified and as directed.

PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping of new pole / reconstruction old damaged copings etc, including necessary form work complete all as specified and as directed.

M&L for taking out old unserviceable and supply, laying, fixing Double walled corrugated HDPE duct pipe of 50mm outer dia confirming to IS-14930 (Part-II) of approved colour with fittings for cable protection complete all as specified and as directed. Make - Dutron/Finolex/ Tirupati/SFMC Pipes/Jain Pipes/Swastik/Telerex.

All as per Srl item No. 7.00 above but of 90mm outer dia.

Dismentling taking out carefully old/unserviceable UG cable any type any size from trenches/poles/ducts/LT panels after dismentling ends from OH conductors/MCCBs/joint boxes for relaying/refixing or carrying to store for Schedule of Credit complete all as specified and as directed.

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wal or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 6.0 Sqmm 2 core with required aluminium cable lugs complete all as specified and as directed. Make of Cable : Havells/Polycab/HPL/Grandley/Gloster

All as per Srl item No. 10.00 above but 10 Sqmm 2 core.

All as per Srl item No. 10.00 above but 16 Sqmm 3.5 core.

All as per Srl item No. 10.00 above but 25 Sqmm 3.5 core.

All as per Srl item No. 10.00 above but 35 Sqmm 3.5 core.

Earthing complete with galvanised steel earth plate electrode of size 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top dedge of the plate not less than 1.50m below normal ground level, connected to galvanised iron strip 32x6mm as earthing lead by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including light grade GI watering pipe 25mm bore and 40mm bore light grade for strip protection with funnel wire mesh complete as shown in electrical plate No 5 of MES schedule Part-I 2009, connected to earthing testing point. Note - The unit rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI Pipe (Light grade) for watering, 40mm dia pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and light grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete ass as specified and testing on completion complete ass as specified and directed Note - The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

S&F GI tubing light grade 50mm bore, ISI marked, for cable protection in road crossing complete all as specified and as directed. Make : Jindal/Tata steel

S&F 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 6.0 sqmm and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension GI wire from OH conductor to building incl dismentling taking down unserviceable one complete all as specified and as directed. Make : Havells/Polycab/HPL/Grandley/ Gloster/Kalinga

All as per Srl item No. 17.00 above but 10 Sqmm.

All as per Srl item No. 17.00 above but 16 Sqmm core.

M&L for painting of steel tubular pole with one coat of alumium paint incl cross arm, bracings, supports, nuts, bolts, of LT OH line from above copping to top of pole and marking with alternate white and black paint strip 30 cm wide (5 Nos) with synthetic enamelled paint complete all as specified and as directed.

Supply only PVC insulated, PVC sheathed twin flat core 1100 volts grade, 2.5 sqmm aluminium stranded conductor fron OH conductor or from junction box to street/security/post top luminaries complete all as specified and as directed. Make : Havells/Polycab/HPL/Grandley/ Gloster/Kalinga

Dismentling taking down carefully flood/street/gate light fitting any type any make any capacity from Pole/Building for repair or for fixing in other position complete all as specified and as directed.

S&F LED Street light fitting 72 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver complete all as specified and as directed. Make - Crompton cat part No LSTP-72-CDL or eqivalent in Havells/ Polycab

S&F LED Street light fitting 90 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver complete all as specified and as directed.Make - Crompton Cat part No LSTN-90-CDL-A or eqivalent in Havells/Polycab

S&F energy saviing environmental friendly, long life exclusive innovative die-cast aluminium IP-66 LED flood light of 120 Watt 5700K with high power LED as light source source complete all as specified and directed. Make - Crompton cat part No LFLN-120-CDL/60 or eqivalent in Havells / Bajaj / Osram

S&F security light bracket made out of galvanised steel light grade pipe of 40mm dia 1.5 mtr long bend to an angle of 120 degree with 02 Nos mild steel clamp 50mm x 50mm and 04 sets of nuts, bolts and washers painting with two coats of synthetic enamel paint over a coat of red oxide primer incl dismentling taking down unsv complete all as specified and as directed. Make : Jindal Pipes / TATA / BST / Prakash Tubes / Oswal

S&F Street light junction box of size 200mm x 140mm x 95mm outdoor type, weather proof, factory made out of PVC sheet 1.8mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and out going cable/wire complete comprising with the followings incl dismentling taking down unsv complete all as specified and directed. :- (a) Bus bar with two aluminium strips, 63 Amps capacity insulated with insulators, including colour coding, including PVC cable of suitable size from bus bar to MCB (b) MCB SPN 5 to 30 Amps - 01 No (c) Clamps made out of 25mm x 3mm flat iron duly weldedwith nuts & bolts complete all as specified and as directed. Make : Sintex / Hansel/ HPL

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

Supply and installation, testing and commissioning Time switches 415V three phase of 32 Amp rating digital type with contactor fitted inside steel enclosure with locking arrangement incl taking down unsv complete all as specified and as directed. Make - Indoasian Cat Part No TL032DB0 or equivalent of Havells / Sinetrac / GE / BCH

Supply and installation 3 pole power contactor, 415Volts, 50Hz, upto 80 Amps suitable for existing street light panel as per existing sample, incl dismantling and taking down unsv one complete all as per specfied and as directed. Make-Havells/L&T/ABB/Schnieder

Taking down carefully aluminium /GI strip of any size and type from site complete all as specified and as directed.

M&L for fixing in replacement of aluminum strip of size 25 x 3.15 mm with saddles from above test point to Air Termination rods inter connections including brazing for joints copper/brass nuts , bolts /washers with insulators for necessary fixing on wall/laid on roof conductors and down conductors above ground complete all as specified and as directed.

Labour for fixing only aluminium strip of size 25 x3.15mm with saddles from above test point to Air Termination rods inter connections including brazing for joints copper/ brass nuts , bolts /washers with insulators for necessary fixing on wall /laid on roof conductors and down conductors above ground complete all as specified and as directed.

M&L for fixing inreplacement of galavanised iron strip of size 32 x 6 mm for earth continuity from test point to aluminium conductors above for inter connections including brazing for joints copper/brass nuts, bolys/ washers with insulators for necessary fixing on wall/trenches etc complete all as specified and as directed.

M&L for fixing in replacement of Air termination, single pointed aluminum rod 12 mm dia and 600 mm long laying at proper distance as per direction of Engr-in-Charge incl all cutting /welding complete all as specified and as directed.

M&L for fixing in replacement of test point terminal block made of gun metal or phosphorous bronze of size 75x 75x75 mm drilled and screwed incl 3 Nos 8 mm dia head screw complete all as specified and as directed.

Dismantling of Solar Water Heating system Collector or tubes type and Suppy & Fixing new, evacuated tube type panel set of 500 LPD to 1000 LPD capacity complete with side holder necessary modification to the bracket fram/ inlet/ out let connection of water incl connected accessories complete all as per specified and as directed.

S&F in repair hot water pipe line upto 25mm dia (heavy grade) duly insulated with glass wool/ any other heat insulating material not less that 50mm thick layer including and aluminium cladding by 1.5 mm thick sheet, over the insulation firmly locked in perfect round shape complete all as per specified and as directed.

S&Fin replacement Heating Element capacity 3.0KW (as per existing sample) ISI Marked round/ tringular base, push type or thread type including rubber washer suitable for Solar water heater of capacity 500 Ltrs to 1000 Lts capacity including taking down unserviceable complete all as specified and as directed.

S&F Thermostat ISI Marked round/ tringular base, push type or thread type including rubber washer (as per existing sample) suitable for Solar water heater of capacity 500 Ltrs to 1000 Lts capacity including taking down unserviceable complete all as specified and as directed.

M&L for repairing of tank leakage with company soldering of Solar water heater (any make) of capacity 500 Ltrs to 1000 Ltrs on existing place by Authorised and existing company with testing by Company rep after repaired till deleivery of water and incl all connected accessories complete incl taking down/ opened/ replaced the parts complete all as per specified and as directed. Note for Item No 38 to 41 :- (i) Make of Spares/ Servicing/ replacement of parts will be carried out by Auth service agency of existing make of Solar Water Heater).

M&L for complete servicing/ cleaning of DG Sets with kerosene or by blower where necessary , prevention of leakage of fuel /oil/ water/coolant, tightening of loose nuts and bolts , retensioning of fen belt, descaling of radiator cleaning with cleaning agent, cleaning of fins by applying pressurised air using blower including replacement of rubber housing set complete , checking of all electrical connections and testing on full load of DG sets with taking out and replacement of defrective parts. Srl item No. 43.00 contd-- Notes:- The quoted rates of the contractor includes for (i) Fixing the serviceable parts in position and replacement of unserviceable parts with new parts. (ii) Supply and replacement of small/minor parts such as nuts, bolts, washers, locking nuts, small springs, studs etc and parts mentioned in the item above.(iii) Labour for replacement of lubricating oil (Cost of lubricating oil shall be measured and paid separately) (iv) Make of DG sets installed are one of the make mentioned in the item. Spare parts to be replaced shall be suitable for the same make and model of engine as installed at site and serviced. (v) Major parts required to be replaced shall be measured and paid separately under respective items of BOQ.

DG set 30 KVA, Make:-Mahindra by Powerol Installed at Signal Centre Kasauli

DG set 45 KVA, Make :-Kirloskar Installed at Installed at Section Hospital Dagshai

DG Set 62.5 KVA Make: Kirloskar Installed at 95 Inf Bde Camp Kasauli

DG Set 100 KVA Make: Mahindra installed at Dhobi ghat W/S installation at Dagshai

DG Set125 KVA Make: Crompton Ltd Installed at Than Ka Village W/s Installation

DG Set 125 KVA Make: Mahindra by Powerol Installed at Military Hospital Kasaulli

DG Set 200 KVA Make: Crompton Ltd Installed at Patta Ka More W/S installation

DG Set 380 KVA Make: Cummins Installed at P2 (Nauti Goan) W/S installation

Supply only to top up of Coolant for the DG Sets complate all as specified and as directed . Make : Gulf/Servo/Castrol

Supply and filling /top up of Distilled water for the batteries of the DG Sets complete all as specified and as directed.

Supply only of Engine belt off size for 30 KVA DG Set (set of two)complete all as specified and as directed .

All as per Srl item No. 46.00 above but 45 KVA DG Set.

All as per Srl item No. 46.00 above but 62.5 KVA DG Set.

All as per Srl item No. 46.00 above but 100 KVA DG Set.

All as per Srl item No. 46.00 above but 125 KVA DG Set.

All as per Srl item No. 46.00 above but 200 KVA DG Set.

All as per Srl item No. 46.00 above but 380 KVA DG Set (set of three).

Supply only of Diesel filter element with gasket for 30 KVA DG Set complete all as specified and as directed .

All as per All as per Srl item No. 53.00 above but 45 KVA DG Set.

All as per All as per Srl item No. 53.00 above but 62.5 KVA DG Set.

All as per All as per Srl item No. 53.00 above but 100 KVA DG Set.

All as per All as per Srl item No. 53.00 above but 125 KVA DG Set.

All as per All as per Srl item No. 53.00 above but 200 KVA DG Set.

All as per All as per Srl item No. 53.00 above but 380 KVA DG Set.

Supply only of Oil filter element complete for 30 KVA DG Set complete all as specified and as directed .

All as per All as per Srl item No. 60.00 above but 45 KVA DG Set.

All as per All as per Srl item No. 60.00 above but 62.5 KVA DG Set.

All as per All as per Srl item No. 60.00 above but 100 KVA DG Set.

All as per All as per Srl item No. 60.00 above but 125 KVA DG Set.

All as per All as per Srl item No. 60.00 above but 200 KVA DG Set.

All as per All as per Srl item No. 60.00 above but 380 KVA DG Set.

Supply only of Air cleaner Element complete Set for 30 KVA DG Set complete all as specified and as directed .

All as per All as per Srl item No. 67.00 above but 45 KVA DG Set.

All as per All as per Srl item No. 67.00 above but 62.5 KVA DG Set.

All as per All as per Srl item No. 67.00 above but 100 KVA DG Set.

All as per All as per Srl item No. 67.00 above but 125 KVA DG Set.

All as per All as per Srl item No. 67.00 above but 200 KVA DG Set.

All as per All as per Srl item No. 67.00 above but 380 KVA DG Set.

Supply only of Air filter (inner & outer) complete Set for 30 KVA DG Set complete all as specified and as directed.

All as per All as per Srl item No. 74.00 above but 45 KVA DG Set.

All as per All as per Srl item No. 74.00 above but 62.5 KVA DG Set.

All as per All as per Srl item No. 74.00 above but 100 KVA DG Set.

All as per All as per Srl item No. 74.00 above but 125 KVA DG Set.

All as per All as per Srl item No. 74.00 above but 200 KVA DG Set.

All as per All as per Srl item No. 74.00 above but 380 KVA DG Set.

Supply only of New nylon reinforced PVC fuel pipe complete Set for 30 KVA DG Set complete all as specified and as directed.

All as per All as per Srl item No. 81.00 above but 45 KVA DG Set.

All as per All as per Srl item No. 81.00 above but 62.5 KVA DG Set.

All as per All as per Srl item No. 81.00 above but 100 KVA DG Set.

All as per All as per Srl item No. 81.00 above but 125 KVA DG Set.

All as per All as per Srl item No. 81.00 above but 200 KVA DG Set.

All as per All as per Srl item No. 81.00 above but 380 KVA DG Set.

M&L for replacement of battery 12V, 180 Ah maintenance free for DG sets with Electro plates including battery lead positive & negative battery terminals complete all as specified and as directed. Make Exide/Amaron/Luminous

Draining out old Engine oil from Chamber, cleaning of oil sump complete and filling of new oil confoming to specification. Make Castrol/Valvoline/Servo

Taking down and repair to self starter by taking out defective parts and repacement of armature , field coils, carbon bush, pinion, shocker arm, bearing complete including testing complete all as specified and as directed.

M&L for scrapping of old existing paint, oil from body of alternator, radiator, engine, base frame including exhaust pipe/silencer, preparartion of surface and filling of cavity using filler material and spray painting to complete DG set of capacity 30/45/63.5 KVA alongwith all accessories including fuel tank with two coats of super enamelled paint of superior quality as approved by Engr-in-Charge and writing MES/SM Nos using black paint of suitable font of letters in background of white paints complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No. 91.00 above but for 125/200 KVA DG Set.

All as per Srl item No. 91.00 above but for 380 KVA DG Set.

Overhauling of FIP Pump & calibration complete all as specified of the DG Set 30 KVA complete all as specified and as directed.

All as per Srl item No. 94.00 above but 45 KVA DG Set.

All as per Srl item No. 94.00 above but 62.5 KVA DG Set.

All as per Srl item No. 94.00 above but 100 KVA DG Set.

All as per Srl item No. 94.00 above but 125 KVA DG Set.

All as per Srl item No. 94.00 above but 200 KVA DG Set.

All as per Srl item No. 94.00 above but 380 KVA DG Set.

Material and labour for servicing / repairs of 380 KVA alternator and removing the same from engine of 380 KVA DG set and servicing and cleaning of alternator carbon brush assembly including commutor, slip rings, carbon brushes and brush holders , checking of commutor, brushes, AVR complete and refixing the same in its existing position after servicing back to the site and connecting up electric connections with suitable lugs complete and testing complete all as specified and as directed

Taking out exhuast unit from 30 KVA DG set for cleaning of silencer , Silencer pipe by using wire brush ect and refix in the same position with necessary welding nut and bolts complete all as specified and as directed.

All as per Srl item No. 102.00 above but 45 KVA DG Set.

All as per Srl item No. 102.00 above but 62.5 KVA DG Set.

All as per Srl item No. 102.00 above but 100 KVA DG Set.

All as per Srl item No. 102.00 above but 125 KVA DG Set.

All as per Srl item No. 102.00 above but 200 KVA DG Set.

All as per Srl item No. 102.00 above but 380 KVA DG Set.

Amount of credit of Rs. 74469.50 document in pdf form, will be deducted offline while acceptence of tender.

Pankaj Traders

bharat refrigeration and electric co.