Construction of 6 Nos. of Class room building (G plus 2) and 4 Nos. of Boys Toilet block with development work for Government Higher Secondary School at Malaireddiyur in Tirupathur District under NSNOP Scheme.

E0001) Earth work excavation for foundation in all soils (including refilling) a) 0 to 2 mt.

E0003) Earth work excavation for Open foundation in soft disintergrated rock (Including refilling) a) 0 to 2 mt.

F0040) supplying and filling in foundation and basement with filling crushed stone sand in layers of 150 mm thickness well

F0006) Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement

F0007) Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement

FL0115: Supplying and laying of Rubber molded hydraulic pressed Paver blocks following thick using stone dust with required design & color including cost, conveyance of paver block and labour charges for laying with proper slope and gradient etc b.83mm thick Paver block

CSMP0002) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement

CSMP0003) Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) (including Mortar Plasticizer (Liquid) at 200ml per bag) using 20mm gauge hard broken stone jelly

CSMP0004) Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge broken Brick Jelly

BMP0006) Brick work in Cement Mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in foundation and basement

BMP0007) Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) for super structure a) In Ground floor

b) In First floor

c) In Second floor

d) In Third floor

BMP0008) Brick partition wall in Cement Mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure a.In Foundation and Basement

b.In Ground floor

BMP0009) Brick partition walls 70mm thick using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in cement mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) for super structure in the following floors a. In Ground Floor

b. In First floor

c. In Second floor

F0026) Filling in foundation and basement and other similar works with Excavated earth in layers of 150mm thick

FLMP0001) Flooring with a bed of CC 1:5:10 (one of cement, five of crushed stone sand and ten of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) using 40mm size hard broken stone jelly

FLMP0002) Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FL0024) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring (No Sand)

FL0025) Weathering Course with concrete broken brick jelly 20mm gauge

FLMP0004) Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2%

FLMP0005) Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

FLMP0006) Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0008) Supplying and laying of polished shahabad slab /stone, 20mm thick with machine cut edges of size 2'x'2' below (Grey colour) of approved qualty for florring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick and other similar works)

PLMP0001) Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick finished with neat cement

PLMP0002) Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick finished with neat cement

PLMP0003) Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

PLMP0005) Plastering in CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick a) 150mm wide border

b) 75mm wide border

c) 50mm wide border

GR0001) Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate

PA0026) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

EL0041) Supplying and fixing 15amps 3 pin plug type socket on a suitable MS box 16g thick concealed and covered with 3mm thick

EL0074) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook of 100mm dia, 75mm depth and 3mm thick

EL0075) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

EL0214) Earthing and Earth connections: Providing Earthing Station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0m of 20mm B-class GI pipe including all requirements

RE0006) Providing Pre-Constructional Antitermite treatment

CS0037) Supplying and fixing of precast cement concrete slab for cupboard / ward robes, shelves, cover slab for chambers baffle walls etc., and other similar works 20mm thick using standardised concrete mix M20 I. 20mm thick a) In Stilt / Ground Floor

b) In First Floor

c) In Second Floor

CS0037) Supplying and fixing of precast cement concrete slab for cupboard/ ward robes, shelves, cover slab for chambers, baffle walls etc., and other similar works 40mm thick using standardised concrete mix M20 II. 40mm thick a) In Foundation and Basement

b) In Stilt / Ground Floor

c) In First Floor

C0049) Precast cement concrete Jally ventilator using standardised concrete mix M20 without vibrating charges 50mm thick a) In Ground Floor

C0065) Providing and laying in position, Standardised Concrete Mix M-20 Grade (Using crushed stone sand) a) In Foundation and Basement

b) In Stilt / Ground Floor

c) In First Floor

d) In Second Floor

e) In Third Floor

F0013) Supply and filling in foundation and basement with gravel

FW0004) Providing Form work and centering for reinforced cement concrete works a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

J0017) Supplying and fixing of 4mm thick pin headed Glass panels with aluminium anodised ‘U’ shape beeding of size 12x12mm with 107 gram in average weight for 1m length with aluminium bolts and nuts for the shutters of the steel windows already supplied to suit all the size and as directed by the departmental officers. (The quality of glass and aluminium beeding should be got approved from the Executive Engineer before use).

JD0073) Providing and fixing factory made unplasticized polyvinyl chloride (UPVC) Door Frame of size 50X47mm with a wall thickness of 5mm, made out extruded 5mm rigid UPVC foam sheet, mitred at two corners and joined with 2 nos of 150mm long brackets of 15X15mm M.S square tube. The two vertical and horizontal door profiles are to be reinforced with 19X19mm M.S Square tube of 19 gauge with primer coat.

JW0030) Manufacturing and supplying of Steel Windows (Weight basis)

RE0004) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry) of all diameters for reinforcement for all floors including cost of binding wire, bending tying)

FLMP0018) Supplying and fixing of pre-cast kerb stone of size 450x300x150mm made in CC 1:3:6 (One of cement, three of crushed stone sand and six of hard broken stone jelly) using 20mm size hard broken stone jelly including Cost of Mortar Plasticizer (Liquid) at 200ml per bag, the cost of Kerb stone moulding, laying, curing, transporting, pointing and as directed by the departmental officers..

WS0002) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe

WS0033) Supplying and fixing of half turn C.P Long body Tap of 15mm dia

WS0004.c) Supply and errection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 1000 litres (excluding free board) of approved brand (superior variety) with ISI Mark (marked with tank itself) with top lid

WS0006) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

WS0276.a) 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

WS0023: Supplying, delivery and laying of following dia UPVC pipe schedule 80 of approved ISI quality including earth work excavation, cutting, threading, and jointing, conveying, lowering the UPVC pipes, UPVC special in the trench, refilling the earth after laying, barricading, pumping, de-watering watch and ward etc., all complete and as directed by the departmental officers. Pipe below G.L a. 32mm dia UPVC Pipe

WS0234) Labour charges for the following dia PVC/UPVC pipe below ground level including earth work excavation, cutting, threading, jointing, lowering, laying to proper grade alignment and refilling the trench with excavated earth etc., all complete and as directed by the departmental officers. c) 32mm dia UPVC Pipe

SA0002) Supplying and fixing of porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

SAMP0003) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of crushed stone sand and ten of 40 mm gauge brick jelly) including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete

SAMP0004) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag) In Ground floor.

SA0048) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110 mm dia UPVC Non Pressure pipe

MS0003) Supplying and fixing of Aluminium Towel Rail of 75cm long

EL0002) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.V. grade cable a) Light point with ceiling rose

b) Light point with bakelite battern type holder

EL0010) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable with continuous earth by means of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 k.v . grade cable in fully concealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16 g thick concealed and covered with 3mm thick laminated hylem sheet for FAN POINT controlled by 5 amps flush type switch

EL0026) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable with continuous earth by means of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 k.v . grade cable in fully concealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16 g thick concealed and covered with 3mm thick laminated hylem sheet for 5 amps. 5 pin plug socket point at Switch Board Itself

EL0034) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable with continuous earth by means of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1 k.v . grade cable in fully concealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16 g thick concealed and covered with 3mm thick laminated hylem sheet for 5 amps. 5 pin plug socket point at convenient places including circuit mains, cost of all materials, specials

EL0078) Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor a) 48 Electric fan 1200mm sweep

EL0185) Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0190) Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0191) Supply and Run off main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0201) Run off 4 wires of 4 Sq mm. PVC insulated single core multi strand fire retard flexible copper cable (for EB service connection ).

C0020) Providing Rain water harvesting pit of 1m dia and 600mm depth and filling the pit with 40mm stone jelly to a depth of 300mm from the top of the augering portion and filling with crushed stone sand to a depth of 300mm over the stone jelly and covered with the pre-cast perforated slab of 40mm thick (using M20 mix) Providing pit

a) Augering 30cm dia

EL0326) Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4P MCB Isolator as incoming and 3 nos. 32A 3P MCB , 15 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Lower End

PA0037) Painting the New walls with two coats of approved best ready mixed plastic emulsion paint for inner walls

PA0042) Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat

PA0001) White washing three coats using clean shell lime slaked

EL0070) Supplying & fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety etc., all complete and as directed by the departmental officers. b) 12 watts LED bulb

EL0045) Supplying and fixing of water tight Bulk head fitting suitable for 12W LED bulb with guard

EL0047) Supplying and fixing of 4'18 watts crystal LED tube light and fixing the tube light fittings

EL0100.a) Supplying and fixing of 25 watts LED bulb with Street light fittings arrangements

EL0174) Supplying and run of 8 SWG GI wire for earth connection on wall / below ground level

NL0006) Supplying and fixing of following size aluminium die casting lettering and numbering with approved coloured powder coated in matt finishing including drawing model letters on the paper, preparing the design, moulding, casting, filing, colouring to the requirement by spraying the paint, transporting to site and labour for scaffolding drilling and fixing the letters by using projected rod fevicol quick fix and cement slurry and redoing the damaged area and colouring etc all complete and as directed by the departmental officers. (the design should be got approved from the executive engineer before moulding) b) 12" dia aluminium dye casting letters

MS0059) Supplying and delivery of following God - rej novtal lock including all cost of lock and labour charges etc., all complete and as directed by the departmental officers. a) 6 Lever with 3 keys

WS0280) Supplying and fixing of following dia UPVC specials of best approved quality including cost of specials and labour charges for fixing etc., all complete and as directed by the departmental officers. WS0280.I.c) 32mm dia UPVC Elbow

WS0280.III.c) 32mm dia UPVC Union

WS0018) Supply and fixing of following dia GI Specials of best approved quality,with ISI mark including cost and conveyence and fixing in position etc., all complete in all respects complying with relevant standard specification and as directed by the departmental officer (The brand and quality of the GI pipe should be got approved from EE before use). WS0018.V.c) 32mm dia GM Gate Value

Please Enable Macros to View BoQ information