SPECIAL REPAIRS / REPLACEMENT TO JOINERY ITEMS IN CERTAIN BLDGS AND PERIMETER WALL AT NSB-III PALAM BAGH UNDER GE NEW DELHI

Amount

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off the shutter from the frame) all as specified.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq. m (without taking off shutters from the frame) all as specified.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq. m but with shutters (without taking off shutters from the frame complete in all respect as specified and directed.

Taking down Shutters of any description exc 1 sq. m but n exc 2 sq. m each all as specified.

S and F Solid PVC Door Frame of size 50mm x 95 mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS sqare tube used as per specifications and drawings incl fasteners and make good the damage portion complete all as specified and directed.

Supply and fixed Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelam Moulded PVC Sheet on the front face 2mm thick plain PVC sheet on back face to be fixed on frame at site as per specification & drawing

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing and make good the damage portion complete all as specified and directed.

S&F 35mm thick 1st class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fitted to chowkhats all as specified and directed.

S and F 35 mm thick 2nd class H wood Plain framed, panelled shutter (two panel) withlock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides,supplied and fitted to chowkats complete all as specified.

S&F in repair Aluminium Powder coated ventilator made of aluminium section weighting 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, 5 mm frosted glass aluminium snap beading screws complete all as specified and directed by Engr-in-Charge.(top portion will be openable shutter with stainless steel wire mess and bottom portion shall be fixed glass)

S& F in repairs glazed and gauzed three track aluminium powder coated sliding window made out of Jindal extruded aluminum window classic 18mm series as mentioned below and glazed with 5 mm thick glass fixed with rubber beading/gasket and GI fly prrofing and aluminiun powder coated beading all around and lock type handle of size 75mm etc complete all as specified and directed:- (a) outer Frame with rectangular section -14035, frame bottom with section 20957 and frame top and sides with section-20958 (b) Shutter : top and side with section-20606 , interlocking with section-20605 and bottom with section-20604

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as directed

S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section

S&F 150 mm Extruded aluminium alloy handles, fabricated type., anodised

S&F Butt hinges in 100 mm Size, heavy weight, cold rolled mild steel, and fixed

Supply and fixed Floor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring,

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar.

M&L 18 to 20 mm thick Green marble stone in one piece (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble.

Providing edge moulding to 18 - 20 mm thick marble stone any description of counters vanities etc incl machine polishing to edge to give high gloss finish etc complete all as specified and directed.

Supply and fixing PVC Cup Board made of 18 mm thick of approved colour (solid PVC sheet) (Plus / minus 0.7) Double side prelam celuka PVC ply complete for hold of shelf / partation and shall provide 3 edges in sizes 18 mm x 18 mm as per required length. the edges of shelf / partation / wall side to be lipped with 18 mm x 1 mm thick PVC sheet of density 600 Kg /cbm manufactured by as ISO -9000 certified company , lipping portion should be match with laminated colour, using solvent cement etc.( including all necessary Aluminium hardware fitting i.e Piano hing , 4 handles, ball catchers including locking arrangement in each Cup board including dismantling of existing complete in all respect as specified and directed.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including all necessary fitting complete all as specified and directed.

M & L Sheet glass of 4.8 mm thick plain glass sheet ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including oil putty complete all as specified and directed.

M & L Sheet glass of 4.8 mm thick, frosted / obscured glass sheet extra over ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including oil putty complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) steel frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified.

M & L Securing glass of any description in existing steel frames with oil putty including removing loose or decayed putty Complete all as specified and directed. (New length of frame reputtied shall be measured)

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as directed

Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as directed

S&F 15mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as directed Make of Pipe :- TATA/BST/Jindal.

S&F 20mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as directed Make of Pipe :- TATA/BST/Jindal.

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises.

M & L Non skid joint less coloured ceramic tiles 7-8mm thick (Square / Rectangular) area of each tile exc 0.06 Sqm not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr in charge Make :- Somany or equivalent in Kajaria/Johnsion

M & L Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over including screeding 10 mm thick in CM 1:3 on wall complete in all respect as specified.Make :- Somany or equivalent in Kajaria/Johnsion

M & L Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement screed 1:4,complete in all respect as specified.Make :- Somany or equivalent in Kajaria/Johnsion

Ditto all as per above item but in skirting only ditto

S&F in repairs Drappery curtain rods decorative type stainless steel 304 Grade, 25mm nominal dia and having wall thickness 1.40 mm of approved quality/make including fixing of two number decorative brackets fixed in brick/concrete wall, Two number knob on both ends of curtain rods ( The length of each curtain rod will be 1.00m to 2.50m long) complete all as directed and specified.

S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)including sheet cover complete all as specified. MAKE : Parryware / Hindware / PRAYAG

S and F in repairs PVC valveless, syphonic action type, flushing cistern of 10 lit capacity low level, white, with inlet,ball valve, float and handle including brackets with 32 mm CP Flush pipe of Low level cistern complete all as specified. MAKE : Parryware / Hindware / PRAYAG

S&F in repairs 15 mm dia brass chromium plated long body Bib tap fancy type with capstan head screwed down for iron pipe complete in all respect as specified.

S & F in repair 15mm bore dia Stainless Steel finish 2 way Bib Cock quarter turn including cover plate complete in all respect as specified and directed by Engr-in-Charge. Make:Jaquar Code : KUB-35041 or equivalent in Prima / Hindware / PRAYAG

Supply and fixed in repair 15mm bore dia Stainless steel finish quarter turn central hole basin mixer round spout with popup Waste assemly with 10mm dia , 450 mm long copper pipes complete in all respect as specified and directed by Engr-in-Charge. Make : Jaquar Code : FLR-5169 or equivalent in Prima / Hindware / PRAYAG

Supply and fixed in repairs 600 mm long C P finish CP Towel Rail Square complete in all respect as specified and directed by Engr-in-Charge. Make:- CERA / Hindware / PRAYAG

S&F in repairs chromium plated health faucet including flexible pipe 15mm bore horse connecting pipe 1.2m long with check nut and washers complete all as specified .(Make : Jaquar Cat No ALD 573 or equivalent in Prima / Hindware / PRAYAG).

S & F in repairs PVC connections 15mm size with PTMT steel nuts of length 450mm complete in all respect as specified and directed MAKE : PRAYAG

S & F PVC mirror cabinet of size 350 mm x 450 mm x150 mm with openable single looking mirror with PVC inner & outer shelves of any colour, including taking down old looking mirror & wooden cupboard mirror complete all as specified and directed MAKE : CERA / Hindware / PRAYAG

S & F in repair 15mm bore brass CP mixer fancy type, three way type, for mixing hot and cold water screwed down for 15mm bore iron pipes complete all as specified and directed by EIC.(Make : Prima / JAGUAR/ Prayag)

S&F in repairs CP grating 125 mm dia round fixed on floor/Nahani trap fixed with cement mortar including necessary cutting etc complete all as directed MAKE : CERA / Hindware / PRAYAG

Supply and fixed peg set of 6 fixed with rawal plug make ;- Prayag Cat no BEA-30 or equivalent in CERA / Hindware / PRAYAG).

S&F in repairs MS sliding door 250 mm long bolt type stove enamelled black with bright bolt not less than 12 mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed complete all as directed.

S&F in repairs butt hinges 100mm medium weight, cold rolled, mild steel fixed with welding or screws on position complete all as directed

S&F in repairs aluminium handles cast type anodised 150mm complete all as directed

S&F in repairs 200mm aluminium anodised barrel tower bolts of extruded section complete all as directed

Taking down cement plaster on brick walls, raking out joints locking for key, scrubbing down with water etc all as specified

M&L for rendering 15 mm thick ready mix plaster (Make - Ultratech) on fair or other than fair faces of brick or concrete external surfaces of walls finished even and smooth complete all as specified and directed.

M&L for rendering 15 mm thick ready mix plaster (Make - Ultratech) on fair or other than fair faces of brick or concrete internal surfaces of walls finished even and smooth complete all as specified and directed. (incl new brick work)

Supply only water proofing compound liquid @ 200 ml / per 10 sqm area of plaster complete all as specified and directed.

M&L preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion paint (APEX ULTIMA) over one coat of primer and over incl one coat of Birla putty all as specified and directed.

M&L Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper on walls over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

S & F GI wire netting 0.9mm dia and 12mm mesh lathing to wood or metal studding, joist etc in walls, ceiling stachions, beams etc incl all laps cutting and waste complete all as directed by EIC

M&L 10 mm thick rendering on ceiling surfaces with ready mix plaster complete all as specified and directed.

M&L Preparation of new plastered or un-plastered surface of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of ceiling by mechanical grinder and applying three coats of white wash over a coat of primer and over incl one coat of 3 mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall by mechanical grinder and applying two coats of oil bound distemper over a coat of primer and over incl one coat 3 mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall by mechanical grinder and applying two coats of Exterior Emulsion paint (APEX ULTIMA) over one coat of primer and over incl one coat of 3mm thick wall care putty all as specified and directed.

M&L preparation of old wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer.

M&L preparation of new or previously untreated surface of wood applying two coat of synthetic enamelled paint over a coat of pink primer in any approved pattern and colour, exceeding 10cm width or grith not other wise provided

M&L preparation of old steel and iron surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide.

M&L for preparation of new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide all as specified and as directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) complete all as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as directed (each line wire to be measured)

All as per item no. 12 above but restraining and resecuring including making good staples etc complete all as specified and directed.

S&F in repairs concertina coil fencing with punched tape concertina coil stretched to a length of 10 metres to achieve 600 mm dia (weighing not less than 8.50 Kg per 10 RM of length), having 50 Nos rounds per 5.4 metre length, spring core wire (2.5 mm thick) of high tensile strength of 165 kg/sqmm with tape (0.52mm thick) and weight 43.478 gm/metre and fixing the same with existing Y-shape angle iron to steel parts and another coil/MS Nibs alloys shown on drgs incl fixing with special galvanised fastners such as clips, U clips all as speicified and directed. Note :- Linear length of coil after stretching and fixing shall be measured for purpose of Payment.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for Y shape angle posts ,struts and similar works as in fencing including cutting tops to slope as directed , drilling holes , notching for wire etc, including all necessary drilling bolting or revited and similarly work confirming to Fe-290 all as specified and directed.

M&L preparation of old steel and iron surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide.

M&L for preparation of new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide all as specified and as directed.

S&F in repair factory made precast Road kerb stone of size 300mm X 450mm and thickness 150mm at bottom and 100mm at top,PCC 1:2:4 type B-0 (12.5 mm graded stone agg) vibro mechnically pressed and floated, heavy duty set jointed and pointed in cement mortar 1:3 complete all as specified and directed and removing rubbish outside MOD land. Make : NTC or Equivalent.

M&L for preparation of new or previously untreated surface of kerbs stone applying two coat of synthatic enamel paint all as directed by Engr-in-charge

Demolition cement concrete (reinforced) of any description and in any position complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 making good of dismantled portion by plastered/concrete work and match with existing surface complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness.

M&L 50 mm thick 1:3:6 type C-2 using 20 mm graded stone aggregates as in plinth protection laid in panels surfaces finished even & fair without using extra cement incl all as specified and directed.

Supply and fix in repairs factory made manholes covers with MS flat all round the cover and incl reinforcement with cement concrete 1:2:4 type B-1, (using 20mm graded stone aggregate) of required thickness and size laid with cement mortar 1:6 in position complete all as specified and directed.

M&L cement concrete 25 mm thick in PCC 1:2:4 (20 mm graded aggregates) as in sub base of floors finished fair and even complete all as directed

M& L for endura chequerd tiles 30 cm x 30 cm with 20 to 25 mm thickness of approved colour and design pattern (Square/ rectangular) as in paths, floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L providing cement concrete type B1, 1:2:4 (20mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seism and other similar bands, plinth courses, string course, lacings courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly round or chamfered angles and thorating all as specified and directed. General Note :- The work described in these items shall be executed in bldgs up to (G+3 floor) hence the contractor shall make scaffolding arrangements, trestles, ladders etc and hessian clothes for protection & all other safety precautions up to 04 storeys of buildings and the cost for the same is deemed to be included in the quoted unit rates. The General note applicable for item No 1 to 90 above. Note :- Removing building materials /old waste unwanted existing material of any description or any type etc. to a distance of 5km or beyond out side MOD Land and the cost for the same is deemed to be included in the quoted unit rates. The Note applicable for item No 1 to 90 above.

Tanveer Associates

VIJAY KUMAR GUPTA

B S R Enterprises

SANJEEV ENTERPRISES

M/S SONU ENTERPRISES

M/S MSD & Associate

M/S GEETANJALI ENTERPRISES