For Increasing capacity of Transformer 400 KVA to 630 KVA Transformer at Pahadi Pradhan Sector A Sitapur road and 400 to 630 KVA in SBI Colony Sector B Sitapur road on 11 KV SRY 1 feeder and 400 to 630 KVA near Hanuman Mandir Paltan chanwani and Inst

Amount

Safe Loading, carriage & unloading of following material from Central store and JE store to work site.

ST Pole 9/11 Mtr long

11/0.4KV 630 KVA T/F

11/0.4KV 250 KVA T/F

11 KV XLPE Cable 3.0x70 sqmm

LT Cable 1x630/400/240 sqmm

AB Conductor (3x120+1x95+1x16) sqmm

Distribution Box 3 Phase.

11 KV 3x120 sqmm XLPE Cable O/D.

Fabrication erection of substation type double pole on ST pole9/11Mtr along with fixing of necessary clamp ,accessories required of MS channel on top dropper with arrangement of fixing of 3 Nos pin insulator as per RESPO specification & direction of E/I.

Fabrication and fixing of DO Fuse Set.

Fabrication and fixing of 11 TPMO Set.

Pipe type earthing with 20 mtr. deep boring and providing Jindal make pipe "B" class 1" dia and GI strip 25x5 6mtr long attached with clamps and GI pipe.

Construction of masonry type Distribution Pillar Box with first class brick Brick ballast, course sand,cement and MS Bar local sand with Henley type fuse unit 03 Nos. and 4 Nos copper bus bar of size 50x6 mm. All material arrange by contractor.

Construction of T/F plinth of size 2x2x1.2 mtr. With Ist class bricks and masonary work in the ratio 1:4 cement & sand coarse ,filling the structure completely as per norms with RCC top 1:2:2 cement sand coarse stone grit with ms bar and MS channel for resting T/F all material shall be supplied by Contractor.

Rectangular wiremess pel fencing of 11/0.4 KV S/S shall be made as per site requirement not exceeding 3 meter height fabrication with 45x45x5 mm angle the frame should also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support the wiremesh. Rectangular welded type wire mess of size 50x25mm made of 12 S.W.G. wiremesh shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wiremesh welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I. The vertical angles shall be grouted 1/6 of its length in ground with 1:2:2 ratio of cement, coarse sand & concrete provision of gate for entry should be provided with pad lock.

Erection of AB Conductor 3x120+1x95+1x16 sqmm on existing/ newly erected pole.Only ABC shall be supplied by the department.

Laying of 11 KV XLPE Cable 3x70 Sqmm by Drilling method. Only cable shall be supplied by the department.

Hoisting of cable by 2.5mm GI pipe 6" dia,cable clamp with nut bolts.

High pressure testing of 11 KV 3x70 XLPE along with arrangement of High Pressure equipment.

Erection & commissioning of 11 KV 3x70 sqmm XLPE Cable O/D. Only O/D jointing kit provided by the department.

Laying of LT Cable with suitable size of Al lug. All material provided by department. Except Alu. Lugs

Installation & commissioning of 11/0.4 KV 250/400KVA T/F including its connection from 11 KV line and LT line mounting of copper L-Piece providing and fixing of Al crimping Lugs ,all material provide by department except nut bolt and copper L-Piece.(All the material except transformer will be arranged by the contractor)

Installation & commissioning of 11/0.4 KV 630 KVA T/F including its connection from 11 KV line and LT line mounting of copper L-Piece providing and fixing of Al crimping Lugs ,all material provide by department except nut bolt and copper L-Piece.(All the material except transformer will be arranged by the contractor)

Dismantling of existing 400 KVA T/F by Opening of all the HT/LT Connection and its safe carriage upto JE Dump store /ESC Daliganj.

Dismantling of old and damage weasel/ABC conductor including opening of LT clamp, insulator rolling of conductor and carriage back to JE store/Central store.

Supply and fixing of clamps.

(a) Dead end clamps

(b) Eye hook for dead end clamp

(c) Suspension clamps

(d) L.T. connectors type 'A' & 'B' type (Piercing connector)

(e) LT Clamp for PCC/ STP Pole with Nut & bolts

(f) Nut bolts off size

Tailless fuse unit complete for outgoing 500 Amp.

Grouting of pole with the help of Cement, Course sand and brick ballast.

Plinthing of ST Pole by Cement, Course sand and Stone Ballast.

Erection of Distribution box 3 phase on pole with the help of pole clamp nut and bolts

Supply and fixing of Danger board suitable size along with clamp.

DEEPAK ENGINEERING

M/S NARAYAN ASSOCIATES

A. A. ENGINEERING CO.

M/S SHAIL ELECTRICALS