REPAIR AND CLEANING OF SEWAGE LINE MANHOLE, GARBAGE BIN, SWT AND INCINERATOR IN TECH AREA AT AF STN GWALIOR

Amount

Cleaning of manholes of any description and in any position depth n'exc 1.5 m deep mechanically or manually by taking off sludge waste/night soli and silted soil from the existing manhole of any size collecting and removal of sludge in sealed container out side Air force boundary and disposal of the same complete all as specified and directed.

Description same all as per item No 1 above but depth of manholes exc 1.5 m and n exc 3m deep complete all as specified and directed.

M & L for dewatering of septic tank/soak well by using dewatering pumps sets of 7.5 HP capacity having dia of suction & delivery pipe as 4” & 3” respectively complete all as directed including making arrangements for disposal of sewage water in nearby nallahs/drains complete all as specified and directed.

M & L for dewatering of static water tank / under ground / semi under ground sump by using dewatering pumps sets of 7.5 HP capacity having dia of suction & delivery pipe as 4” & 3” respectively complete all as specified and directed.

Cleaning of existing chocked /blocked sewage lines of any bore of any description and in any position by taking out loose sediment sand,girt,ash,sludge water, rags ,fibres or vegetation from the following depth of sewage line including removal of sludge/debris to a distance exc 250m but n exc 500m and buried under ground complete all as specified and directed. (a) Upto 1 m depth from GL

(b) Exceeding 1.00 m and n'exc 1.5 m depth from GL.

Opening and cleaning of blockage of kitchen/bath traps or WC any pattern and in any position by rodding or manually upto 1st manholes complete all as specified and directed.

Excavating in trenches n'exc 1.5 m width and n'exc 1.5 m in depth for foundation etc n'exc 10 sqm on plan and n'exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Taking down Sewage pipe line (any size & pattern) incl all fittings, heads, noses, bends, swan necks etc incl cleaning/repairing or removal to store complete all as specified and directed.

M & L for concrete bed in PCC 1:3:6 type C2 (using 20 mm graded stone aggregate) to drain pipes including packing under,and haunching against the sides of pipes, after they are laid and tested for 150 mm dia (internal) of SGSW pipes complete all as specified and directed (Pipes shall be measured & paid separately).

M & L 150 mm dia (internal) SGSW pipes Gde ‘A’ quality laid in trenches jointed in CM 1:2 and tested after the pipes are laid jointed complete all as specified and directed

M&L for returning filling in including spreading levelling and watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material exc 250 m but n exc 500 m distance and depositing complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillasters etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks , straight or curved on plan exc. 6 m mean radius built in CM 1:4 complete all as specified and directed.

Description same all as per item No 15 above but, except brick using old retrieved bricks obtained from demolition in serviceable conditions complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:4 on fair faces of bricks/concrete, finished even & smooth without using extra cement and mixed with water proofing compound (liquid type) @ 200 ml per 50 Kg of cement, complete all as specified and directed by Engineer-in-Charge. (Note : WPC (liquid type) shall be measured and paid separately as supply only)

Supply only water proofing compound.

Demolition of RCC in cover slab, floors and pavings n.exc 15 cm thickness (below or above ground level ) reinforcement cut as required to facilitate demolition complete all as specified and directed.

M & L for providing precast reinforced cement concrete type B1 (1:2:4) (using 20 mm graded aggregate ) as in cover Slab including necessary formwork set in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for Mild steel bars (TMT bars) 10mm dia and over cut to length, bent to shape required including cranking bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia, complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc and writing the date of cleaning and the due date of cleaning complete all as specified & directed exc 250 & n.exc. 500 ltrs capacity of tank complete all as specified and directed.

-Ditto- as above item No 22 but exc 500 & n.exc. 1000 ltrs capacity

-Ditto- as above item No 22 but exc 1000 & n.exc. 2000 ltrs capacity

S&F in repair, rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 500 Ltr capacity complete all as specified and directed.

S&F in repair, rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 1000 Ltr capacity complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete as specified and as directed.

S&F in repair, stainless steel grating with centre hole of size 100 mm complete all as specified and directed.

S&F in repair, health faucet with flexible pipe hook as approved by GE.

S&F in repair, single lever wash basin mixer without popup west system with 450mm long braided hoses complete all as specified and directed.

S&F in repair, float valve/ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed ( Minimum weight 20 mm -210 gms ) suitable for 20 mm dia Pipe complete all as specified and directed.

S&F in repair, for gun metal, globe or gate valves, with iron wheel head , screwed both ends for iron pipe of bore 20 mm and fixed complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Description same all as per item No 33 above but 15 mm bore complete all as specified and directed.

Refixing old steel tubing 20 mm bore and connections in new or old position ( walls,ceiling, floors, etc) complete all as specified and directed

Description same all as per item No 35 above but 15 mm bore complete all as specified and directed

S&F steel tubing 20mm bore medium grade with all fitting and fixed complete to walls, floor and ceiling etc complete all as specified and directed

Description same all as per item No 37 above but 15 mm bore complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic tiles coloured in vertical surface 450x300x7mm thick as on wall etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Demollition of cement concrete (unreinforced) incl floor tile, screed bed at ground floors and pavings, coping n. exc 15 cm thick below or above ground level and removing the demolished material to a distance exc 500 m but not exceeding 1.5 km and depositing where directed, complete all as specified and directed .

M & L for PCC (1:2:4) type B0, (using 12.5mm graded stone aggregate) as in coping including necessary form work complete all as specified and directed .

M&L for 25 mm thick PCC (1:2:4) type B0 (12.5 mm graded stone agg) as in sub base of flooring complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding in layer of mortar for laying floor finishes in cement plaster 1:4 complete all as specified and directed.

M&L for non skid joint free coloured ceramic tiles 7-8mm thick (Square/Rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles complete all as specified and directed.

S & F in repair, for 10 litre capacity PVC valve less symphonic action type flushing cistern low level , white , with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair, vitreous china squatting pan 'Orrisa' pattern size 580 x 440 mm white with integral foot rests ( excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe, anti syphonage pipe etc complete including making good to floor complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white including seat cover , fixing bolts and flush pipe complete all as specified and directed.

S&F in repair Vitreous China urinals bowl type flat back white size of 465 x 355 x 265 mm, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing flush pipe grating and union for discharge pipe complete all as specfied and directed.

S&F in repair Vitreous China urinals half stall type flat back white , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing flush pipe grating and union for discharge pipe complete all as specfied and directed.

S & F in repair vitreous china wash basin, white, flat back size 550 X 400mm including waste pipe complete all as specified and directed.

S&F in repair EWC Wall Hung Extended P of size 670 x 400 x 785 mm with fllushing cistern, soft close seat cover and Twin Flush Fitting all as specified and directed.

S&F in repair CP bottol trap (with integral partition) 32mm size with 250mm and 190mm long wall connections pipes complete all as specified and directed.

S&F in repair for 110 mm bore dia PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor and wall complete all as specfied and directed.

S&F in repair 110mm PVC(SWR) bends complete all as specfied and directed.

S&F in repair 110mm PVC(SWR) junction single, (Single T) eual or unequal complete all specfied and directed.

S&F in repair for 75mm bore dia PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor and wall complete all as specfied and directed.

S&F in repair 75mm PVC(SWR) bends complete all as specfied and directed.

S&F in repair for 25mm bore dia PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor and wall complete all as specfied and directed.

S&F in repair 25mm PVC(SWR) bends complete all as specfied and directed.

S&F in repair for PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair 15mm bore Angle valve fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union as approved complete all as specified and directed.

S&F in repair 15mm bore two way Angle valve fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union as approved complete all as specified and directed.

S&F in repair chromium plated fancy type bib taps long body cast copper alloy with capston head handle screwed down screwed for iron pipe or for brass ferrule & fixed in 15 mm bore pipe complete all as specified and directed.

S&F in repair 15mm bore pillar taps, fancy type, chromium plated screwed down high pressure with or without lettered with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair CP toilet paper holder box type with necessary brass screw complete all as specified and directed.

M&L for brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

M&L for preparing old decorated plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and as directed.

M&L for Preparing old decorated plastered or unplastered surfaces of external walls and applying one coat of exterior emulsion paint complete all as specified and directed . (Make : ACE Paint of M/s Asian Paints or equivalent in M/s Berger as approved by GE.

S&F in repair 15 dia anglular stop cock with wall flange all as specified and as directed.

S&F in repair waste coupling 32 mm full threaded for WHB all as specified and as directed.

S&F in repair urinal waste pipe (Make Prayag ) , all as specified and as directed.

S & F in reapir flush pipe of polythylene of low or high level density or PVC ,32 mm dia, for low level cistern ,all as specified and as directed.

S&F in repair Waste coupling of CP brass (half or full threaded) suitable for urinals, 32 mm dia all as specified and as directed.

S&F in repair Waste coupling of PTMT (half or full threaded) suitable for urinals, (Minimum weight 32mm-45gms, 32 mm dia ,all as specified and as directed.

S&F in repair Self Closers Pillar Tap (Brass) all as specified and directed.

S&F in repair Flush Cock (Push Type) 25mm all as specified and directed.

S&F in repair Pillar Cock Swan Neck (T/M) all as specified and directed.

S&F in repair Brass Urinal Spreader all as specified and directed.

Demolition Stone slabs and tiles of any description or thickness in floors, walls laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm screed bed in CM 1:6 complete all as specified and directed.

M&L for 100 mm thick plain cement concrete (1:2:4) type B2, using 40 mm graded stone aggregate as in pavings/hard standings and finishing cement concrete surface even & fair,laid in alternate panels complete all as specified and directed.

Desillting/desludging of septic tank/soak well any description and any depth including getting out and removing all the spoil/slush out of MD land by adhering all laid norms and stipulations by the concerned local authorities, all as specified and directed by Engineer-in-Charge. Note: Only solid content shall be considered after reduction of 50% of volume for payment purpose.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 150 mm internal dia all as specified and directed by Engineer-in-Charge.

S&F in repair old unserviceable PVC top cover of tanks over head tank of 300 to 500 ltrs capacity with hinging device, with necessary nuts, bolts and washers installed at roof top, all as specified and directed by Engineer-in-Charge.

All as per item No 86 above but capacity exceeding 500 Ltrs and not exceeding 1000 Ltrs all as specified and directed by Engineer-in-Charge.

S&F 1.40mm dia GI netting (20mm mesh size) over/around exposed reinforcement of SWT, Chajja/facia, wall cracks etc and securing with screws, washers/nails complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete 1:2:4 type B2 (Using 40mm graded stone aggregate) as in sub base of SWT complete all as specified and directed by Engineer-in-Charge.

M&L for repairing of damaged RCC SWT wall, Chajja, Facia, Fins, roof projection by rendering 15-30mm thick in one or two layers as per site requirement in CM 1:3 with waterproofing compound (liquid type) @ 200ml per 50kg of cement, including hacking out old broken/damaged concrete portion, cleaning of old reinforcement etc and applying neat cement slurry @ 3Kg/Sqm complete all as specified and directed by Engineer-in-Charge. (Note : WPC (liquid type) shall be measured and paid separately as supply only)

lodhi builders

SHRI RAM CONSTRUCTION

Bhadauria and Brothers

M/s Shubham Construction Co.

JNK BOND

Tara Mai Enterprises