Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.1 LAccepted-AOC INDEX NO B 33 NC R O KRALPORA DISTT BUDGAM SRINAGAR J K 190019 | SRINAGAR | BUDGAM | JAMMU AND KASHMIR | 190019 | L1 | Accepted-AOC LOWEST L1 | |
| 2 | L2₹41.7 L+₹1.3 L (3.12%)Rejected-Finance RAWALPORA WANABAL PATI YAYIL POST OFFICE SANAT NAGAR SRINAGAR 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | L2 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
20 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE 970 EWS C/O 56 APO PIN 913970
SPL REPAIR TO BLDG NO P-31 AT JAK LI RC AND 2XSPL REPAIR TO SEWAGE LINE SEPTIC TANK ETC AT OAF UNDER GE 970 EWS
2022_MES_542575_2
GE 970 EWS-38/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE 970 EWS C/O 56 APO
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹98,000
Yes
9 Mar 2023
1 Sept 2022
22 Sept 2022
1 Sept 2022
20 Sept 2022
6 Sept 2022
Amount
Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings. complete all as specified and directed.
Supply and fixing pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc), or insulation boards/slabs/blankets, any thickness any type, complete all as specified and directed.
Supply and fixing hanger 6 mm dia GI (Up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40X3 mm size 60 mm long, complete all as specified and directed.
Supply and fixing anodised aluminium snap grid frame work 605X 605 mm for false ceiling complete all as specified and directed.
Supply and fixing 4 mm thick non asbestos fibre cement building boards fixed with aluminium frame work with screws as in ceiling, complete all as specified and directed.
Material & labour for roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats, etc. FE 410-W (Gde- E-250) quality A including dismantling old mild steel work complete all as specified and directed.
Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling old mild steel work complete all as specified and directed.
Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Preparation of old painted steel surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.
Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles, complete all as specified and directed.
Material & labour for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
All as per item No. 13 but except bricks --ditto--
Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
Rendring 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Preparation of new plastered surfaces of wall and applying two coats exterior emulsion over a coat of exterior primer, complete all as specified and directed.
Rendering 10mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Preparation of new plaster surface of wall and applying 2mm thick wall care putty complete all as specified and directed.
Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
Preparation of old plaster surface of wall and applying 2mm thick wall care putty complete all as specified and directed.
Preparation of old plastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed.
Rendering 5mm thick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.
Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
Taking down chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frames). complete all as specified and directed.
Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed
Taking down Shutters of any description n exc 1 sqm each complete all as specified and directed
Taking down Shutters of any description exc 1.0 sqm and n.exc 2 sqm each complete all as specified and directed
Supply and fixing box type steel window (Factory made) outer frame made out ERW tube 'P' section 65mmX45mmX25mm and shutters of ERW tube 'P' section 50mmX35mmX20mm openable (double) shutter with glazed openable shutter on (External side) and wire gauzed openable shutters on (internal side) with steel pintal hinges, steel handle 100mm long, mild steel tower bolt 02 Nos on each shutter, stopper of 'Z' section and its locking arrangement at mild steel hook and eye including 0.36mm dia nominal dia of stainless steel wire cloth avg width of aperture 1.4mm dia and 4mm thick sheet glass window and 4mm figured glass for ventilators all as specified and directed. Note: The quoted rate against the above item shall also include:- (i) For provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat tar on the ends of steel frame in contract with bricks/concrete surface. (ii) 04 Nos MS steel Lugs of 20mmX5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs (iv) 0.36 mm dia SS wire mesh (v) 4 mm thick sheet glass- for window (vi) 4 mm thick figured glass- for ventilator
Supply and fixing solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, in opening as per specification and drawing, complete all as specified and directed.
Factory made solid panel PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on front face and 2 mm thick plain color PVC sheet on back face supply and fixing in frame at site as per specification and drawing, complete all as specified and directed.
Butt hinges medium weight cold rolled stainless steel 75 mm size complete all as specified and directed.
M&L for Pressed steel frames(factory made) made out of not less than 1.25mm thick black MS sheet for doors of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
M&L for PCC 1:3:6 type C-0 using 12.5 mm graded crushed stone aggregate as in back filling, coping, hold fasts, complete all as specified.
Material & labour for 30 mm thick flush shutter solid core construction with block bord core and plywood face panels commercial type both side complete all as specified and directed.
Supply and fixing 2nd class hard wood 35 mm thick factory made glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.
Preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
Extruded aluminium alloy D type handles, anodised of 75mm size ISI marked complete all as specified and directed.
Material & labour Aluminium handles, D type, anodized 150 mm long ISI Marked, complete all as specified and directed.
150mm long aluminum anodised barrel tower bolts of extruded section ISI Marked, complete all as specified and directed.
Aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300mm long dia 16 mm complete.ISI Marked, complete all as specified and directed.
Mild Steel 300mm, ordinary rat tail rod pattern springs,incl roller and roller plate complete. ISI Marked,complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.
3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq.m in each pane, complete all as specified and directed.
0.36 mm dia nominal dia of stainless steel wire cloth avg width of aperature 1.40 mm and fixed with SS wire staple etc complete all as specified and directed.
Demolition of cement concrete (unreinforced) in any description & in any position, complete all as specified and directed.
Material & labour for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels,drains complete all as specified.
Extra for forming fair finish to drain or channels 30cm internal girth in cement concrete using extra cement incl forms, moulds/mitred stopped ends in manholes etc complete all as specified.
50mm thick PCC 1:3:6, type C-2, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A", complete all as specified and directed.
75mm thick PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggte) as in floors complete all as specified and directed.
M&L for 25mm thick Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub-floors, sub-bases, and pavings etc complete all as specified and directed
Dismantling of floor, hearth or wall tiling including cement mortar bedding/backing etc, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Material & labour for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6, complete all as specified and directed.
Material & labour for coloured non skid ceramic tiles 7 to 8 mm thick, jointless, area of each tile exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match shade of tile complete all as specified and directed.
Rendering 10mm thick in CM 1:4 on stone masonary surfaces, other than fair faces of brick work finished even and fair to receive tiles complete all as specified and directed.
Material & labour for Glazed ceramic tiles in vertical surface 350mmx 250mmx 7mm/ 450mmX 350mmX 7mm thick such as skirting, dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match pattern and shade complete all as specified and directed.
Material & labour for factory Cement concrete tiles 30cm x 30cm x 25mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors,with grey cement and colour pigment and cut and polished laid over etc complete all as specified and directed. all as specified and directed.
Material & labour for green Marble work 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with stone, including dismantling old stone slab, complete all as specified and directed.
Material & labour for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM (1:6) including dismantling old stone slab complete all as specified and directed.
Supply and fixing of 15mm bore PPR pipes 3- layer SDR 7.4 of outer diameter of pipes as following UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply all PPR plain & brass threaded polypropylene random fittings fixed to wall including fittings and testing including taking down old GI pipe complete all as specified and directed.
Supply and fixing of 20mm bore PPR pipes 3- layer SDR 7.4 of outer diameter of pipes as following UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply all PPR plain & brass threaded polypropylene random fittings fixed to wall including fittings and testing complete including taking down old GI pipe all as specified and directed.
Rotational moulded polyethylene water storage tanks three layer of capacity 500 litre, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 25mm dia ball valve high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball etc complete including taking out existing water tanks of any description complete all as specified & directed.
Supply and fixing in repair vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest including trap, PVC flushing pipe and anti-syphonage pipe including PVC valveless, syphonic action, flushing cistern 10 ltr capacity, low level, white, with inlet ball valve, float and handle including brackets, complete all as specified and directed.
Supply and fixing in repair for Soap dish, vitreous China white, approximate size 160x160x90mm, complete all as specified and directed.
Supply and fixing in repair Low density PVC connection commercial quality 450mm long including PTMT nuts at both sides of 15mm bore and fixed, complete all as specified and directed.
Supply and fixing in repair Low density polythylene (LDPE) Waste pipe 32mm bore, 900mm long, complete all as specified and directed.
Supply and fixing in repair 15mm bore bib tap long nose/long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass, weight n ot less than 450 gms ferrule and fixed, complete all as specified and directed.
Supply and fixing in repair 15 mm bore Brass CP wall mixer/basin mixer for WHB, Sink & bathroom for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
Supply and fixing in repair 15 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, complete all as specified and directed.
Supply and fixing in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, complete all as specified and directed.
Supply and fixing in repair 15mm bore stop/angle cock, cast copper alloy CP, fency type high presure with capstan head handle,wt n less than 450 gms screwed both ends for iron pipe of for unions complete all as specified and directed.
Supply and fixing in repair 110mm PVC, SWR pipes, single socketed in any length with rubber ring joint laid in trenches or in floor, complete all as specified and directed.
All as per item no.74 above but 75mm bore pipe ---ditto---
Supply and fixing in repair 110mm PVC, SWR pipes, single socketed in any length with rubber rign joint fixed with wall, complete all as specified and directed.
All as per item no.76 above but 75mm bore pipe ---ditto---
Supply and fixing in repair PVC, SWR bends (any radius) of 110mm dia complete all as specified and directed.
Supply and fixing in repair PVC, SWR bends (any radius) of 75mm dia complete all as specified and directed.
Supply and fixing in repair 110 mm dia PVC, SWR branch pieces, single (equal or unequal), Single Y equal or unequal etc, complete all as specified and directed.
Supply and fixing in repair 75 mm dia PVC, SWR branch pieces, single (equal or unequal), Single Y equal or unequal etc, complete all as specified and directed.
Supply and fixing in repair 110 mm dia PVC, SWR branch pieces, single (equal or unequal), Single T equal or unequal etc, complete all as specified and directed.
Supply and fixing in repair 75 mm dia PVC, SWR branch pieces, single (equal or unequal), Single T equal or unequal etc, complete all as specified and directed.
Supply and fixing in repair PVC, SWR traps 'P' or 'S' of 110mm dia complete all as specified and directed.
Supply and fixing in repair PVC, SWR cowls of 75mm dia complete all as specified and directed.
Supply and fixing in repair PVC, SWR cowls of 110mm dia complete all as specified and directed.
Supply and fixing in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed.
Supply and fixing in repair for Grating doom 100 mm dia of PTMT (Minimum weight 25 gms), complete all as specified and directed.
Supply and fixing in repair Brass chromium plated tubular towel rail 20mm dia `D' type 60 cm long between flanges, complete all as specified and directed.
Supply and fixing in repair 25 mm dia Stainless Steel curtain rods including fixing arrangements, complete all as specified and directed.
Supply and fixing in repair 25 mm dia Stainless Steel fancy type brackets including fixing arrangements, complete all as specified and directed.
Supply and fixing in repair 25 mm dia Stainless Steel fancy type finale caps etc. complete all as specified and directed.
Supply and fixing in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.
Supply and fixing in repair 15 mm dia CP sower rose, 110 mm face with or without swivel joints incl fixing to steel pipes or unions etc, complete all as specified and directed.
Preparing surface of sunken slab and applying 15mm thick cement plaster 1:3 cement sand mortar with integral water proofing compound both on floor & wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating Polymer modified cementation coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturers instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder concrete upto top level to receive top flooring, complete all as specified and directed.
50mm thick PCC 1:2:4, type B-0 using 12.50 mm graded crushed stone aggregates as in roof/floor padding on old surfaces, complete all as specified and directed.
M&L for RCC (1:2:4), type B-1 (using 20mm graded crushed stone aggregetes) as in slab supporting on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves including demolition of old rcc complete all as specified and directed..
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surfaces complete all as specified and directed..
M&L for Second class hard-wood in scantlings, clean sawn, timber fixed, incl dismantling scantling 40 Sqcm and above complete all as specified and directed
S&F in repair 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work , fixed with screws all round complete all as specified.
Supply and fixing 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed
S&F in continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flaps 30mm (when open) complete all as specified and directed.
Hasp and staple 150 mm size, safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate, fixed with screws complete all as specified.
S & F kitchen Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboaratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including supply and fixing cantilever brackets of mild steel angle 35 mm x 35 mm x 5 mm, 32mm dia brass waste coupling ,32 mm dia PVC waste pipe (rigid quality) and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410 mm x 330 mm x 160 mm, fixed in repair complete all as specified and directed.
S&F in repair stainless steel plate rack (utensil rack) of size (900 mm x 600 mm) and with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/ bolts, complete all as specified and directed
M&L for cleaning of SGSW /RCC/PVC sewage line of 100mm dia by rodding/auger rods & drain pipe machine as required for one manhole to another manhole including gully traps and getting out the sludge from any size of manholes and gully traps, before & after cleaning process of SGSW /RCC/PVC sewage line and well flushing using clean water through water bowser of pipe of any capacity (arranged by the contractor) and removing the sludge etc to a distance n.exc 250m and burying the same underground by digging pit of suitable size from habitant area and returning filling with excavated materials up to ground level including removal of surplus soil to a distance n.exc 250m with and including taking off manholes/gully trap covers and re-fixing the same after cleaning process complete all as specified and directed. Note:- T&P like rods, bamboos, rope etc shall deem to be include in this unit rate.
-ditto- as per item no 106 above but for 150 mm dia of pipe
-ditto- as per item no 106 above but for 200 mm dia of pipe
M&L for Cleaning of septic tank/soakage well of any capacity and depth incl inlet chamber, outlet chamber after mixing of contaminated waste effluent and sludge etc of septic tank by mixing machine to change the state of solid/semi solid sludge to liquid state by using extra water provided by the contractor if required and getting out through sewer jetting cum suction machine vehicle having tank of 10000 litre capacity from any location and disposal to suitable place outside MD land i.e. authorised civil location with and including taking off & re-fixing manholes covers etc. complete all as specified and directed.
M&L for cleaning and taking out sludge (solid/semi solid state) from septic tank of capacity 50 to 100 users and disposal to suitable place outside MD land i.e. authorised civil location complete all as specified and directed
M&L for cleaning and taking out sludge (solid/semi solid state) from septic tank of capacity 100 to 250 users and disposal to suitable place outside MD land i.e. authorised civil location complete all as specified and directed
M&L for cleaning and taking out sludge (solid/semi solid state) from septic tank of capacity 250 to 500 users and disposal to suitable place outside MD land i.e. authorised civil location complete all as specified and directed
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.
Returning filling in layers including leveling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.
Removing surplus spoil to a distance exc. 250m but not exc. 500m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.
Material & labour for salt glazed stoneware drain pipe Grade-A 100mm bore laid in trenches, jointed on and including concrete bed in cement concrete 1:3:6 type C-2 and packing under and haunching against the sides of pipes after they are laid and tested including demolition and breaking up drain pipes, 100 mm dia drain pipe of any type set in cement mortar complete all as specified and directed.
Material & labour for salt glazed stoneware drain pipe Grade-A 150mm bore laid in trenches, jointed on and including concrete bed in cement concrete 1:3:6 type C-2 and packing under and haunching against the sides of pipes after they are laid and tested including demolition and breaking up drain pipes, 150 mm dia drain pipe of any type set in cement mortar complete all as specified and directed.
Material & labour for salt glazed stoneware drain pipe Grade-A 200mm bore laid in trenches, jointed on and including concrete bed in cement concrete 1:3:6 type C-2 and packing under and haunching against the sides of pipes after they are laid and tested including demolition and breaking up drain pipes, 200 mm dia drain pipe of any type set in cement mortar complete all as specified and directed.
Cutting into existing manhole removing existing drain making good to wall and rendering cutting out branch channel and making good benching for 100mm dia pipe in cement concrete 1:2:4 complete all as specified and directed.
-ditto- as per item no 119 above but for 150 mm dia of pipe
-ditto- as per item no 119 above but for 200 mm dia of pipe
M&L rendering 15 mm thick in CM 1:4 including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete complete all as specified and directed. Note:- WPC will be measured and paid separately.
M&L rendering 15 mm thick in CM 1:4 including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete with and including taking down cement or lime plaster or racking of pointing and scrubbing out existing finishes on wall of any for three storey bldg incl all necessary arrangement like scaffolding and masonry complete all as specified and directed. Note:- WPC will be measured and paid separately.
Supply only liquid water proofing compound complete all as specified and directed.
Demolition of reinforced cement concrete of any descritption and in any position not otherwise speccificallt provided for as directed.
M&L for RCC 1:2:4 Type-B1 (using 20mm graded crushed stone aggregate) as in manhole cover slab and similar article with plain faces, set in cement mortar 1:4 complete all as specified and directed.
M&L for RCC 1:2:4 Type-B1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed
S&F TMT Steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, less than 0.9mm dia or securing with clips complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specially provided complete all as specified and directed.
Material & labour for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete etc complete all as specified and directed.
Material & labour for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in coping including necessary form work complete all as specified and directed.
Supply and fixing in repair vitreous china wash down water closet pan (Pedestal pattern), white (EWC) with ‘P’ or ‘S’ trap, including connection to drain or outgoing pipe and 10 ltr capacity PVC flushing cistern, 15mm dia PVC connection 450mm long to flushing cistern/ sanitary fittings, inlet, outlet pipe connections, and plastic water closet seat cover, closed pattern with recessed bottom cover and mild steel chromium plated hinge complete all as specified and directed.
Supply & fix in repair PVC (SWR) 75mm bore multi floor trap plain with grating including jointing with waste pipe with adhesive complete all as specified and directed.
Supply & fix in repair 100 dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
Supply & fix in repair 100 dia Cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
Material & labour for PCC 1:7:12 type F-2 using 40mm graded stone aggregate as in sunken floors complete all as specified.
Taking down carefully unsv/damaged copper/aluminium surface (batten/coduit or casing caping) point wiring any length for light/fan/socket or power including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc) and removing material from site and making good to the disturbed surface to match with existing finish etc complete all as specified and directed.
Point wiring using FR PVC insulated unsheathed /multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FR PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bend, junction box and pressed steel sunken box 60 mm deep & 1.6 mm thick duly painted inside and anticorrosive out side for mounting switches, sockets, fan regulators etc with 3mm thick plastic laminated sheet cover of suitable size, connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc (conduit shall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible), for light/fan/bell point etc complete all as specified and directed. (Note : Switch/bell push/fan regulator etc shall be measured and paid separately)
All as per Srl item No. 139 above but for 3 Pin 5 Amp socket outlet point controlled by one switch 5 Amps one way on same board complete all as specified and directed.
All as per Srl item No. 139 above but for 5 Pin 5 Amp socket outlet point controlled by one switch 5 Amps one way on independent board complete all as specified and directed.
All as per Srl item No. 139 above but for one 15Amp socket outlet point concealed using 2.5Sqmm FR PVC insulated multi-strand copper conductor wire including 1.5 Sqmm FR PVC insulated unsheathed copper conductor earth wire and making good to disturbed surfaces of wall floor to match existing finishes etc complete all as specified and directed.
Socket outlet, 2 in 1, 3 pin, 6 Amp, flush type, AC 230 volts etc complete all as specified and directed.
Switch socket combination, 5 Amp, 2 in 1, flush type, ISI marked, complete all as specified and directed.
Switch socket combination, 3 pin, 16 amp, ISI marked complete all as specified and directed.
Supply and fixing in repair 1x20 W LED 6000k (4 ft long) decorative ultra slim square prfile linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, extruded aluminium body heat shrink, provided for efficient dissipation and itegrated electronic driver complete with lamp complete all as specified and directed.
Supply and fixing in repair 1x10 W LED 6000k (2 ft long) decorative ultra slim square prfile linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, extruded aluminium body heat shrink, provided for efficient dissipation and itegrated electronic driver complete with lamp complete all as specified and directed.
Lamp holder(in replacement) insulated body with back plate suitable for batten fitting including LED lamp of capacity 9 watts complete all as specified and directed..
Switch piano flush type, single pole, 6 Amp, one way, AC 230 volts etc complete, all as specified and directed.
Supply and Fixing in repair of exhaust fan of size 200 mm sweep assembling at site including electric connection from ceiling rose to connector with fliexible cord twin core twisted copper of size 23/0.0076 and testing including taking down existing one complete all as specified and directed. Make:- Havells/Bajaj/crompton/Anchor.
Electronic fan regulator, stepped type, hum free socket type suitable to control speed of fan 0-100%, 230 V etc complete all as specified and directed.
Ceiling rose polycarbonate isolated body surface Bakelite, not less than 50x20mm, three terminals, AC 230 volts etc complete all as specified and directed.
Supply and Fixing in repair Street/Security light LED , 60 Watt energy savings and environmental friendly long life versatile pressure die cast aluminium fittings including necessary brackets and clamps complete connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Make : Bajaj/Philips/Crompton/ Wipro Note : CA No shall be written on each fitting before installation.
Double door MCB DB SPN, 240 Volts, 8 Way made out of CRCA powder coated sheets, IP43 protection with copper bus bar including taking out old unsv MCB DB any size/type, etc complete all as specified and directed.
Supply and Fixing in repair MCB single pole neutral (SPN) 240 volts, 40amp, 10KA (C-series) of approved make and cat part etc complete all as specified and directed.
Supply and Fixing in repair MCB single pole (SP) 240 volts, 6 to 32 Amps, 10KA (C-series) of approved make and cat part etc complete all as specified and directed.
Material and labour in repair for sub main wiring with two runs of single core PVC insulated (FRLS) unsheathed copper conductor multistranded cable of size 4 sqmm 1100 volts grade drawn through in & including PVC conduit 25mm dia & 2.5 sqmm single core copper conductor multistranded PVC insulated (FRLS) unsheathed cableas earth wire continuity conductor complete all as specified and directed by Engineer in charge. Note : (i) Two run of cable 4 sqmm and one run of 2.5 sqmm earth wire shall be measured and paid as one unit only. (ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour
Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 metre in depth for taking up or laying of cables including getting out in any kind of soil complete all as specified and directed..
Sand cushioning to underground cables 8cm thick before laying cable and 15cm thick after laying and streching the cable, complete all as specified and directed.. Note :- For payment purpose punned thickness shall be measured.
Brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable complete all as specified and directed.
1100 volt grade XLPE insulated heavy duty cable, 25 sqmm 3.5 core, strip armoured with aluminium stranded conductor overall PVC sheathed laid in trenches including taking down existing cable etc complete all as specified and directed. Note : Excavation & Earthwork shall be measured and paid separately.
Supply and fixing in repair of galvanised iron tubes 40mm bore, light grade including all fittings fixed to wall, ceilings and or laid in floors/tenches/under road etc complete for cable protection complete all as specified and directed.
Material and labour in repair for Earthing complete with galvanised steel earth plate electrode 600mm x 600 mm x 6mm burried directly in ground (earth pit not less that 2.25 metre deep below ground level) vertically, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to galvanised iron strip 32x6mm by means of nuts, bolts, washers of GI steel all as shown on electrical plate No 3 of MES schedule Part I connected to earthing test point and testing on completion with and including necessary excavation and earth work, earth electrode, earthing lead from electrode to equipment / substation, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded black trap/granit/Basalt stone aggregate) for earth pit with 40 x 40 x6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 15 mm dia with funnel and wire mesh, and 15 mm dia GI light grade earth lead protection pipe, complete all as specified and directed..
Supply, fixing, testing and commissioning of powder coated MS sheet electric meter box made out of 2mm thick MS sheet with double door and locking arrangements of size not less than 1300mm x 750mm x 30mm with suitable thickness of hylem sheet for fixing existing electric meters -06 Nos, including supply and fixing of new MCCB 100A - 01 No, MCB SPN 32Amp - 07 Nos with aluminium bus bar for phase and neutral and see through glass - 08, connecting internally prewired copper conductor with electric meter connection of required size, and making good to the disturbed wall surface including dismantling the old meter box complete all as specified and directed.
FIRDOUS AHMAD BABA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .