GE863/EWS-T-48 OF 2022-23

Amount

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet, complete, all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in framed work or Framed work, complete, all as specified and directed.

Dismantling timber scantlings under 40 sq.cm in section, in any positions as in framed work but in fillets, rails, posts, rafters, purlins, etc complete all as specified and directed.

M & L for second class hardwood clean sawn scantlings as in timber framed and fixed, complete, all as specified and directed.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 13Sqcm & n .exc 25 sqcm, complete, all as specified and directed.

M & L for 6 mm thick(No of ply 5) plywood, grade BWR, type BB, fixed with nails to timber frame work as in ceiling, complete, all as specified and directed.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 3Sqcm & n .exc 6 sqcm, complete, all as specified and directed.

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames). including removing from site, complete, all as specified and directed.

S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete, all as specified and directed.

S & F second class hardwood 35 mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers and fitted to chowkats,complete, all as specified and directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed.

S & F galvanised mild steel wire cloth , 0.56 mm nominal dia of wire and average width of aperature 1.18 mm, complete, all as specified and directed.

S & F 150mm aluminium, anodised, barrel tower bolts of extruded section etc, complete, all as specified and directed.

S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21, complete, all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete, all as specified and directed.

S & F of aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete, all as specified and directed.

S & F mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate, complete, all as specified and directed.

S & F clamps, hold fast,hook washer & similar small articles conforming to Fe-290 Gde-E-165, complete, all as specified and directed.

M & L for providing, cement concrete cast in situ 1:2:4 , type B1 (Using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edge including form work, complete, all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced), complete, all as specified and directed.

M &L for 75 mm thick cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate finishing surface even and smooth without using extra cement as in plinth protection, complete, all as specified and directed.

S & F of 20 mm dia Aluminium anodised curtain towel rail including one pair of fixing brackets, complete, all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar, concrete bedding and removing rubbish off the premises, complete, all as specified and directed.

M&L for light coloured Vitrified tiles of 10mm thick (square/Rectangulur), polished area of each tiles n.exc 0.36 Sqm as in floor etc sat and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick cement screed bed or bedding layer in CM 1:6, complete, all as specified and as directed.

M & L for preparation of wood and wood based materials, new or old surface of any description and girth not otherwise described and treated with two coats of creosote oil, complete, all as specified and directed.

M&L preparation of old surface of wall and applying one coat of oil bound distember, complete, all as specified and directed.

M&L for preparation of old plastered surface of walls and applying one coats of cement base paint, complete, all as specified and directed.

M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer, complete, all as specified and directed.

M & L for preparation of surface of wood and wood based materials, steel or iron work, new or old of any description or girth not otherwise described, and treated with tar or coal tar black paint as in small articles such as stop, covers, gully gratings, holdfasts, ende of posts, back of chowkats, etc. area tarred not exc. 0.10 Sqm each complete all as specified and directed.

M & L for preparation of surface of wood and wood based materials, steel or iron work, new or old of any description or girth not otherwise described, and treated with tar or coal tar black paint as in ends of posts, back of chowkhats etc. area tarred exc. 0.10 Sqm but not exc. 0.50 Sqm each complete all as specified and directed.

Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketch fitting & regulator etc. including making good to the disturbed surfaces of wall, roof and floor etc. to match with the existing surfaces, complete, all as specified and directed by Engineer-in-Charge.

Taking down unserviceable submain wiring and service cable alongwith batten /PVC conduits etc. and making good disturbed surfaces of walls/floors and match the existing surface, complete, all as specified and directed.

Taking down unserviceable main switches, DBs with MCB SP/Isolators by unscrewing form board, complete, all as specified and directed.

M&L for point wiring using approved colour coding as per IS with using approved colour coding as per IS 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC Casing and caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision PCV Box on top for fixing switches sockets etc. all as specified for one light point/ fan /Bell point controlled by one switch ,complete, all as specified and directed.

All as per Srl item No 34 here-in-before but controlled with one 3 pin socket outlet 5 Amp on same board with other switches with cables 1.5 Sqmm, complete, all as specified and directed.

All as per Srl item No 34 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm complete, all as specified and directed.

All as per Srl item No 34 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with cable 2.5 sqmm including provision of 1.5 sqmm single core multistanded PCV insulated copper conductor as earth conducting conductor, complete, all as specified and directed.

Supply and fixing of switch piano type 15 Amp, 230 Volt, flush button single pole one way, complete, all as specified and directed.

Supply and fixing of socket outlet 3 pin 15 Amp 2-in-one 230 Volt flush type, complete, all as specified and directed by Engineer -in-Charge.

Supply and fixing of socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type complete all as specified and directed by Engineer -in-Charge.

Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way, complete, all as specified and directed.

M&L Ceiling rose, 3 terminal with ISI mark, complete, all as specified and directed

Supply and fixing surface & wall mounted LED 20W tube light fitting 4 feet with high quality material and design, extruded aluminium housing enhances safety. High quality PC diffuser, reliable and robust housing structure, maximize the endurance over the life time slim integrated design, easy to install efficacy 125 limen/ watt all accessories, complete, as specified and directed.

Material and labour for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings, complete, all as specified and directed.

Supply and fixing 9 watts LED backup lamp of 4 hours backup, with auto switch on mechanism in case of power failure, works as regular 9w lamp in normal mode and a 4w lamp in backup mode, complete, all as specified and directed by Engg-in-Charge. Make: Crompton Cat No. LED9WDFINV4CDL or equivalent in Havells LHLDEGEDML8O009 or Wipro Cat No.NE9001

Supply & Fixing bulk head light with 10 W LED Lamp, complete, all as specified and directed.

Supply and fixing of sheet metal enclosure double door for DBs Triple pole and neutral for 4 way 240 volt, complete, all as specified and directed.

S&F MCB TPN 63 Amp,10 KA, complete, all as specified and directed

S&F MCB SP 6 Amp to 32 Amp, 10 KA., complete, all as specified and directed

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below the ground level with top edge of the plate not less than 1.5 mtr below the normal ground level connected to the galvanised earth wire 4 mm dia by means of bolts, nuts hook nuts and washers of galvanization of steel all as shown in electrical plate no 3 connected to earthing testing point all as specified or indicated including testing on completions, complete, all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 m in depth in a hard/dense soil for laying underground cables/ errection of steel tubular poles / stay pit etc, complete, all as specified and directed.

M&L for laying dry bricks old size with subclass 'B' made of burnt clay best quality locally available with permissible tolerance, laid straight trench for protection of cable, complete, all as specified and directed

Returning and filling in two parts (i) using riddled soil obtained from excavated soil upto depth of 30 cm (8 cm below cable and remaining above cable for cushioning of cable and (ii) refilling the trench of remaining depth with normal excavated soil complete all as specified and directed. Note- Excavated soil shall be riddled by using sieve to separate composite particles etc as per IS - 1255-1983 and refilling in trenches as in cable cushioning, complete, all as specified and directed.

Removing excavated surplus material to a distance n.exc 50 m and depostimg where directed at alevel n exc. 1.5 m above the starting point in any type of soil, complete, all as specified and directed.

Supply and Lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables(heavy duty) 1100V grade with stranded aluminium conductor of size 16 Sqmm 4 core, complete, all as specified and directed.

Net Contract Sum will be after deducting Sch Of Credit of Rs 24860.00

M/S Gopal Singh

m/s jupiter builders