Delhi

Active

Works

Civil Works

AR and Mo various roads under division south west road-I during 2026-27, New Delhi. SH Painting of Foot Over Bridges (FOB s) along with minor repair works on FOB and Subway at Ring Road under Sub Division-II).

Public Works Department

New Delhi, Delhi

Amount: ₹1.1 CrCloses: 29 Sept 20262d left

Timeline

Published22 Sept 2026
Closes29 Sept 2026
Bid Opening29 Sept 2026

Tender Value

₹1.1 Cr

EMD Value

₹2.3 L

Closing Date

29 Sept 2026, 3:00 pm2d left

Tender Inviting Organisation

Name

Executive Engineer, M-113(N), PWD, Delhi

Address

Executive Engineer, M-113(N), PWD, Delhi -10

Work Description

AR and Mo various roads under division south west road-I during 2026-27, New Delhi. SH Painting of Foot Over Bridges (FOB s) along with minor repair works on FOB and Subway at Ring Road under Sub Division-II).

Tender Information

Tender ID

2026_PWD_298791_1

Reference Number

35/SE/SWC/PWD/2026-27, 41/EE/SWR-1/PWD/2026-27.

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Works

Period of Work

60 days

Location

New Delhi

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

12 documents required · 12 mandatory

Fee/PreQual/Technical

Required(i) Copy of receipt for deposition of original EMD to any division office of PWD (GNCTD) and (.pdf)

Required(ii) Valid contractors registration/enlistment order (For enlisted CPWD contractors only). (.pdf)

Required(iii) A certificate of work experience issued by an officer not below the rank of Executive Engineer (.pdf)

Required(iv) Affidavit on non judicial stamp paper of Rs. 100/- for Format F, Format G, Format H, (.pdf)

Required(v) The Copy of GST Registration Certificate of the State in which the work is to be taken up (.pdf)

Required(vi) Copy of PAN Card issued by Income Tax Department. (.pdf)

Required(vii) Bidders are required to upload the NIT in PDF as uploaded by EE. This will satisfy digital (.pdf)

Required(viii) The agency has to upload details such as Proprietor name, Mobile No (.pdf)

Required(ix) Letter of Transmittal as per Form-J. (Not applicable to bidder having enlistment in appropriate (.pdf)

Required(x) Certificate of Financial Turnover from C.A. (Form A).(Not applicable to bidder having enlistment (.pdf)

Required(xi) Bankers Certificate (Form B) or Net Worth Certificate (Form B-1) (Not applicable to bidder hav (.pdf)

Finance

Requiredboq (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹2.3 L

Important Dates

Last Activity

22 Sept 2026

Published

22 Sept 2026

Bid Opening

29 Sept 2026

Download Starts

22 Sept 2026

Download Ends

29 Sept 2026

Submission Starts

22 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (19 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and for all lift, as directed by Engineer-in-Charge.
1.1	All kinds of soil	12	Cum	177.5	₹2,130
2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
2.1	1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	9	Cum	7,878.5	₹70,906.5
2.2	1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)	5	Cum	6,518.6	₹32,593
3	Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing. The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approvedshop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.	105	Sqm	5,015.05	₹5,26,580.25
4Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
4.1	Hot finished welded type tubes.	14,500	Kg	194.4	₹28,18,800
5Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
5.1	In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.	4,950	Kg	172.6	₹8,54,370

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 2.75 MB

Work Item Documents

nit.pdf

Tender Documents • 2.73 MB

BOQ_398550.xls

BOQ • 0.26 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and for all lift, as directed by Engineer-in-Charge.
1.1	All kinds of soil	12	Cum	177.5	₹2,130
2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
2.1	1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	9	Cum	7,878.5	₹70,906.5
2.2	1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)	5	Cum	6,518.6	₹32,593
3	Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing. The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approvedshop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.	105	Sqm	5,015.05	₹5,26,580.25
4Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
4.1	Hot finished welded type tubes.	14,500	Kg	194.4	₹28,18,800
5Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
5.1	In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.	4,950	Kg	172.6	₹8,54,370

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and for all lift, as directed by Engineer-in-Charge.

1.1

All kinds of soil

Cum

177.5

₹2,130

2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

2.1

1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Cum

7,878.5

₹70,906.5

2.2

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Cum

6,518.6

₹32,593

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing. The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approvedshop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

105

Sqm

5,015.05

₹5,26,580.25

4Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

4.1

Hot finished welded type tubes.

14,500

194.4

₹28,18,800

5Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

5.1

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

4,950

172.6

₹8,54,370