Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.7 LAccepted-AOC | L1 | Accepted-AOC Lowest Amount Quoted | |
| 2 | L2₹11.2 L+₹1.5 L (15.7%)Rejected-Finance | L2 | Rejected-Finance Higher Amount Quoted | |
| 3 | L3₹11.5 L+₹1.9 L (19.3%)Rejected-Finance | L3 | Rejected-Finance Higher Amount Quoted |
| Sl No | Description | Qty | Unit | M/S TULSI CONSTRUCTION L2 | KAMAL PRAKASH MISHRA L1 | S.S.G. ENTERPRISES L3 |
|---|---|---|---|---|---|---|
| 1.00 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil | 10 | Cum | 500 ₹5,000 | 100 ₹1,000 Lowest | 300 ₹3,000 |
| 2.00 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) | 1 | Cum | 8,000 ₹8,000 | 6,500 ₹6,500 | 6,000 ₹6,000 Lowest |
| 3.00 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate | 25 | Sqm | 1,000 ₹25,000 | 500 ₹12,500 | 400 ₹10,000 Lowest |
| 4.00 | Supply of steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, railings, brackets, gates a similar works. | 100 | Kg | 110 ₹11,000 | 100 ₹10,000 Lowest | 110 ₹11,000 |
| 5.00Vector Control treatment in HRI Campus Through approved pest control company. | ||||||
| 5.10 | SPRAYING:- K-Othrine flow (Deltamethrin 2.5% SC) or other suitable chemical, W.H.O. Approved in the entire out door target area of approx. 7000 sqm around the Building in the campus including all materials, labour Tools and plant - This work should be carried out by Experienced agency in the concerned field. | 3 | Job work | 10,000 ₹30,000 | 8,500 ₹25,500 | 7,500 ₹22,500 Lowest |
| 5.20 | FOGGING:- fogging with KING-FOG or other suitable chemical, W.H.O. approved in the entire out door target area approx. 10000sqm around the building in the campus including all materials, labour Tools and plant. This work should be carried out by Experienced agency in the concerned field. | 9 | Job work | 10,000 ₹90,000 | 8,000 ₹72,000 Lowest | 8,000 ₹72,000 Lowest |
| 6.00 | Supply & fixing 25 mm thick factory made solid PVC profile paneled door single piece extruded profile non decorative finish. | 6 | Sqm | 2,500 ₹15,000 | 2,350 ₹14,100 | 1,800 ₹10,800 Lowest |
| 7.00 | Providing & Applying polymer modified, flexible cementations waterproofing coating with elastic waterproofing polymers on wall surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping old plaster surface and redoing the plaster of required thickness with fixing wire mesh complete in all respect as per the direction of Engineer-in-Charge. | 100 | Sqm | 100 ₹10,000 Lowest | 750 ₹75,000 | 250 ₹25,000 |
| 8.00 | Supply of 18 mm tk. Grade-II Novapan Board one side white & other side decorative grain. | 15 | Sqm | 1,500 ₹22,500 | 600 ₹9,000 Lowest | 2,500 ₹37,500 |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
16 Oct 2025, 11:00 amClosed
Director, HRI, Prayagraj
HRI, Chhatnag Road, Jhunsi, Prayagraj
Annual civil maintenance works at HRI, Prayagraj
2025_HRI_880107_1
HRI/34/2025
Open Tender
Civil Works
Works
365 days
HRI, Chhatnag Road, Jhunsi
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹24,000
24 Jan 2026
4 Oct 2025
17 Oct 2025
4 Oct 2025
16 Oct 2025
4 Oct 2025
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
Supply of steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, railings, brackets, gates a similar works.
Vector Control treatment in HRI Campus Through approved pest control company.
SPRAYING:- K-Othrine flow (Deltamethrin 2.5% SC) or other suitable chemical, W.H.O. Approved in the entire out door target area of approx. 7000 sqm around the Building in the campus including all materials, labour Tools and plant - This work should be carried out by Experienced agency in the concerned field.
FOGGING:- fogging with KING-FOG or other suitable chemical, W.H.O. approved in the entire out door target area approx. 10000sqm around the building in the campus including all materials, labour Tools and plant. This work should be carried out by Experienced agency in the concerned field.
Supply & fixing 25 mm thick factory made solid PVC profile paneled door single piece extruded profile non decorative finish.
Providing & Applying polymer modified, flexible cementations waterproofing coating with elastic waterproofing polymers on wall surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping old plaster surface and redoing the plaster of required thickness with fixing wire mesh complete in all respect as per the direction of Engineer-in-Charge.
Supply of 18 mm tk. Grade-II Novapan Board one side white & other side decorative grain.
Supply of 0.6 mm sunmica
White colour
Wood colour
Supply of 20mm PVC edge bit
Supply of 18mm piyano hinge
Supply of 50 mm wide flat rubber beading for door sil
Supply of bright finished brass night latch of approved quality including necessary screws etc. complete (Make: Godrej)
Supply of Mirror including all accessaries and moulding of edg of completeof superior make glass 60x45
Supply of chicken Mesh
Supply of Multipurpose lock (Make: Godrej, Dorma)
Supply of Ded lock 6 lever (Make: Godrej, Dorma)
Supply of aluminium door stopper
Supply of aluminium sheet
Supply of CP towel rod 600 mm length
Supply of C.P. towel Ring 230mm
Supply of U Rubber Beading / neoprene gasket from existing glazing in aluminum door, window, ventilator shutter and partition works etc
Supply of door closure (Make: Godrej, Dorma)
Supply of Chromium plated Brass curtain rods : 20 mm dia (heavy type )
Supply of 12 mm commercial ply
Supply of Stainless steel wire gauge (Grade-304) aperture 1.4 mm and 0.50 mm dia wire
Supply of 5.5 mm tk. float glass panes (Make: Triveni)
Supply of 35 mm thick flush door (Make: Dock, Century, Green ply)
Supply of second class teak wood
Supply of C.P. Brass long body bibcock 15 mm (Make: L&K, Hindware, Jaguar)
Supply of C.P. Brass angle valve 15 mm (Make: L&K, Hindware, Jaguar)
Supply of Class B, G.I. pipes 20 mm dia (Make: Jindal, Tata, Surya)
Supply of Class B, G.I. pipes 25 mm dia (Make: Jindal, Tata, Surya)
Supply of Class B, G.I. pipes 40 mm dia (Make: Jindal, Tata, Surya)
Supply of Class B, G.I. pipes 50 mm dia (Make: Jindal & Tata, Surya)
Supply of White plastic seat (solid) for E.W.C. with lid C.P. brass hinges and rubber buffers (Make: Cera, Hindware, Parryaware)
Supply of Vitreous china orrisa type W.C. pan size 580 mm (Make: Cera, Hindware, Parryaware)
Supply of Vitreous china pedestal type water closet (Make: Cera, Hindware, Parryaware)
Supply of Vitreous china flat back wash basin 600x480 mm (Make: Cera, Hindware, Parryaware)
Supply of central hole basin mixer with chrome finish-(Make : L&K, Hindware, Jaguar)
Supply of wall mixture for sink with chrome finish-(Make : L&K, Hindware, Jaguar)
Supply of cistern handle as per requirement based on fitted cistern
Supply of CP shower rose 5" dia with 9" Arm
Supply of cistern washer (Make : Commander)
Supply of 15 mm C.P. brass short body bib tap multipurpose (Make: L&K, Hindware, Jaguar)
Supply of Brass spendal for bib tap (Make: L&K)
Supply of CP Brass Health faucets with lead 1.5 mtr. (Make: L&K, Hindware, Jaguar
Supply of C.P. Brass Waste Coupling 38/40 mm (Make: L&K, Hindware, Jaguar)
Supply of SS heavy 4" Sink coupling
Supply of C.P. Brass- Bottle Trap 31/32 mm (Make: L&K, Hindware, Jaguar)
Supply of 50 mm nominal bore gun metal gate valve with C.I. wheel , quality as approved by Engineer in Charge (Make: Zoloto, Leader)
Supply of 40 mm nominal bore gun metal gate valve with C.I. wheel , quality as approved by Engineer in Charge (Make: Zoloto, Leader)
Supply of 25 mm nominal bore gun metal gate valve with C.I. wheel , quality (Make: Zoloto, Leader)
Supply of 20 mm nominal bore gun metal gate valve with C.I. wheel , quality (Make: Zoloto, Leader)
Supply of 15 mm nominal bore gun metal gate valve with C.I. wheel , quality (Make: Zoloto, Leader)
Supply of Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fitting, accessories and flush pipe) (Make: Parryware, Hindware, Cera)
Supply of Double action hydraulic floor spring with brass cover plate (Make: Godrej, Dorma)
Supply of 1/2"x 18" C.P. pipe
Supply of 1/2" C.P. Gyser connection pipe for hut/cold water 600" mm
Supply of 1" PVC ball cock float valve assembly (Make: Prayag)
Supply of MS. D jointer for 80 mm GI pipe line
Supply of MS. D jointer for 50 mm GI pipe line
Supply of GI fitting
Elbow 50mm n/b
Tee 50mm n/b
Socket 50mm n/b
Nipple 50mm n/b 4 inch
Union 50mm n/b
Plug 50mm n/b
Elbow 40mm n/b
Tee 40mm n/b
Socket 40mm n/b
Nipple 40mm n/b 4 inch
Union 40mm n/b
Plug 40mm n/b
Elbow 25mm n/b
Tee 25mm n/b
Socket 25mm n/b
Nipple 25mm n/b 4 inch
Union 25mm n/b
Plug 25mm n/b
Supply of Cement
Supply of Course Sand
Supply of 12mm stone aggregate
Supply of Mason
Supply of unskilled Labour (as required with mason and other)
Supply of Semi-skilled Helper (cleaning of water tank & other maintenance work )
Supply of Welder with assistant & required equipment like welding machine electrode, wire etc.
M/S TULSI CONSTRUCTION (BID ID -3299487)
S.S.G. ENTERPRISES (BID ID -3296709)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .