Construction of Commercial Complex in front of Muttattiraya temple of Channarayapattana TMC Limit

Construction of Commercial Complex in front of Muttattiraya temple of Channarayapattana TMC Limit

Earth work in surface excavation by manual means for lowering levelling the ground by chiselling and wedging in Hard rock for all works other than foundation depth not exceeding 100 mm as per drawing...

Earth work excavation for Foundation by mechanical means for all works depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...

Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Tipper 5.5 m3)(Volume 3, Pg. No. 3, It. No. 1.1, PWD, SR 2023-24)

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite / trap / basalt crushed graded coarse aggregates and fine aggregates as per relev...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works other parallel works from 0.50m to 3.50 m...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works other parallel works from 0.50m to 3.50 m...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08 and conforming to IS:15622, of approved brand & manufacture...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and fixing Health faucet of approved make confirming to ISI specifications at suitable place as per direction of engineer-in- charge ( Rate is inclusive of cost of materials and fixtures, ...

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with...

Providing and fixing Toilet paper holder made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class EconomyP.No.145, I.No.14.93 of KPWD, SR 2023-24,...

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931(P.No.119, I.No.13.12 of Vol-2, KPWD S.R 2023-24)

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.(P.No.117, I.No.13.3.1of KPWD S.R 2023-24)

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. - 15 mm nominal bore with 45cm length(P.No.121, I.No.13.27.2 of Vol-2, KPWD S....

Providing and fixing gun metal non- return valve of approved quality (screwed end) :25 mm nominal bore, Horizontal type(P.No.121, I.No.13.27.2 of Vol-2, KPWD S.R 2023-24)

Providing & fixing CI Nahani trap of approved make confirming to ISI specification and construction of cistren in M 15 as per directions(P.No.127, I.No.13.59 of Vol-2, KPWD S.R 2023-24)

Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the ...

2) 20mm nominal dia pipes 13.32.2

Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...

For 20 mm dia GM (Copper alloy) wheel valves/ check valve(P.No.134, I.No.11.17.2 of KPWD, SR 2023-24, vol-5)

For 32 mm dia GM (Copper alloy) wheel valves/ check valve(P.No.134, I.No.11.17.4 of KPWD, SR 2023-24, vol-5)

Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the ...

2) 20mm nominal dia pipes 13.33.2

3) 25mm nominal dia pipes 13.33.3

4) 32mm nominal dia pipes 13.33.4

Providing and placing on terrace (at all floor levels) polyethylene water storage tanks, IS 12701 marked, with cover and suitable locking arrangements and making necessary holes for inlet, outlet and...

Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tr...

PVC pipes 110mm dia., 6 kg/sqcm & SN4 (P.No.113, I.No. 10.2.2 of Vol-2, KPWD S.R 2023-24)

Providing and fixing PTMT grating of approved quality and colour . Circular type -100 mm nominal dia (P.No.1...

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...

PVC pipes 110mm dia., 6 kg/sqcm & class 3 (P.No.113 & 114, I.No.10.2.2 of Vol-2, KPWD S.R 2023-24)

PVC pipes 160mm dia., 6 kg/sqcm & class 3 (P.No.113 & 114, I.No.10.2.4 of Vol-2, KPWD S.R 2023-24)

PVC pipes 200mm dia., 6 kg/sqcm & class 3 (P.No.113 & 114, I.No.10.2.5 of Vol-2, KPWD S.R 2023-24)

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-cha...

Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per...

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Providing and laying 100mm thick pre-cast cover slabs over Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 500 at 6kg/m2, slabs jointed in CM 1:...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming t...

Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch(Page No.5 Sl No.2.1.2 PWD SR 23-24)

Long point above 6Mtr upto 10Mtr from tapping point to out let via switch(Page No.5 Sl No.2.1.3 PWD SR 23-24 vol-6)

Two outlet in a row, above 3.0M upto 6.0M from tapping point to outlet via switch box(Page No.5 Sl No.2.1.4 PWD SR 23-24 vol-6)

Three outlet in a row, above 6.0M upto 10.0M from tapping point to outlet via switch box(Page No.5 Sl No.2.1.5 PWD SR 23-24 vol-6)

Powder coated metal boxSupplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in...

3 Way (Page No.8 Sl No.3.4.2 PWD SR 23-24 vol-6)

4 5 Way (Page No.8 Sl No.3.4.3 PWD SR 23-24 vol-6)

6Way(Page No.8 Sl No.3.4.4 PWD SR 23-24 vol-6)

8Way(Page No.8 Sl No.3.4.5 PWD SR 23-24 vol-6)

10-12Way(Page No.8 Sl No.3.4.6 PWD SR 23-24 vol-6)

Modular switch mounting polycarbonate plate Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with requirednos. of machine screws...

3 Module(Page No.8 Sl No.3.5.2 PWD SR 23-24 vol-6)

4 Module(Page No.8 Sl No.3.5.3 PWD SR 23-24 vol-6)

6Way(Page No.8 Sl No.3.5.4 PWD SR 23-24 vol-6)

8Way(Page No.8 Sl No.3.5.5 PWD SR 23-24 vol-6)

12Way(Page No.8 Sl No.3.5.6 PWD SR 23-24

Supplying and fixing of modular switch & connected accessories on

existing modular switch plate as per IS 3854 and IS 1293. A 6A One Way Switch(Page No.9 Sl No.3.6.1 PWD SR 23-24 vol-6)

6A Two Way Switch(Page No.9 Sl No.3.6.2 PWD SR 23-24 vol-6)

6A Three Way socket(Page No.9 Sl No.3.6.3PWD SR 23-24 vol-6)

Stepped Fan Regulator Two Module (Page No.9 Sl No.3.6.4PWD SR 23-24 vol-6)

6A Bell Push(Page No.9 Sl No.3.6.8 PWD SR 23-24 vol-6

TV Socket(Page No.9 Sl No.3.6.11 PWD SR 23-24 vol-6)

Telephone Socket(Page No.9 Sl No.3.6.11 PWD SR 23-24 vol-6)

16A One Way Switch(Page No.9 Sl No.3.6.7 PWD SR 23-24 vol-6)

32A DP Switch(Page No.9 Sl No.3.6.9 PWD SR 23-24 vol-6)

6/16A Universal Socket(Page No.9 Sl No.3.6.10 PWD SR 23-24 vol-6)

RJ45/I O Outlet Cat-6(Page No.9 Sl No.3.6.12 PWD SR 23-24 vol-6)

CONCEALED Conduit System

Supplying heavy gauge PVC conduit pipemm diamm thickconfirming to IS 2509 with suitable size bends, metal/PVC Junctionboxes, adhesive paste etc, and running before concreting...

25 mm dia 2 mm thick -power and A/c(Page No.2 Sl No.1.2.2 PWD SR 23-24 vol-6)

c) 32mm dia 2.5mm thick(Page No.2 Sl No.1.2.2 PWD SR 23-24 vol-6)

Groove Cutting Conduit System:

Supplying heavy gauge pvc conduit pipe ...dia...mm thick with suitable size bends, metal Junction boxes adhesive paste etc..,by groove cutting in the wall and fixing by...

25 mm dia 2mm thickItem no 1-1.3.2- P no 1 Ele SR 2021-2022

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

1.5 mm2 (Earth wire)(Page No.5 Sl No.2.3.2 PWD SR 23-24 vol-6)

2.5 mm2 (Ltg Ckts)(Page No.5 Sl No.2.3.3 PWD SR 23-24 vol-6)

4 mm2 (Power Ckts )(Page No.5 Sl No.2.3.4 PWD SR 23-24 vol-6)

6 mm2 (Page No.5 Sl No.2.3.5 PWD SR 23-24 vol-6)

10 mm2 (Page No.5 Sl No.2.3.6 PWD SR 23-24 vol-6)

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc.with provision for fixing suitable type capacity MCBs single phase...

6 Way TP & N DOUBLE DOOR DB (Page No.18 Sl No.5.19.10 PWD SR 23-24 vol-6)

Supply and fixing miniature circuit breaker on existing MCB distribution boards using necessary fixing materials and C type curve indicator ON/OFF energy cross-3 with short circuit breaking capacity ...

6-32 A DP MCB (Page No.17 Sl No.5.18.4 PWD SR 23-24 vol-6)

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. A 32-40A 2 pole (Page No.18 Sl No.5.20.4 PWD SR 23-24 vol-6)

32-40A 4 pole(Page No.18 Sl No.5.20.8 PWD SR 23-24 vol-6)

63 A 4 pole (Page No.18 Sl No.5.20.8 PWD SR 23-24 vol-6)

Supplying & fixing of retrofit type - LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70.efficacy 80 lumen per W, life 25000 burning hours and Compliance to...

Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz & Power factor 0...

LED light fitting 1 x 2 -9/12W(Page No.43 Sl No.11.3.2 PWD SR 23-24 vol-6)

Supply of round/square recess/surface mounted rolling type LED Downlight with WGU10LED Lamp Rib Fabricated from diecast aluminium with white powder coated pre wired to mains connector &has swivelling...

LED square or round down light 15-18W

Supplying of recess mounting non integral type LED w lumin aire comprising of pressurede cast /extruded aluminium housing, with spring loaded false ceiling clamps,Power LEDs with CCT 6500 degree K, C...

Supplying capacitor type 48 sweep ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. single phase AC supply confirminf to ISS-374-1979 and with d...

Supplying of 1440rpm heavy duty eahust fan with bracket blades suitable for operate on 230V 50Hz, AC Supply complete 12 sweep Item no-6.2.1-P No -22 Ele SR 2021-2022

A)25 mm deep Junction box (Page No.3 Sl No.1.5.2 PWD SR 23-24 vol-6)

Supplying And Fixing Metal Fan Box with Round Hook.(Page No.4 Sl No.1.13 PWD SR 23-24 vol-6)

A)Supplying and drawing UTP-CAT 6E LAN cable.(Page No.36 Sl No.8.1 PWD SR 23-24 vol-6)

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. (2 pair) (Page No.36 Sl No.8.2.2 PWD SR 23-24 vol-6)

Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6.(Page No.36 Sl No.8.3 PWD SR 23-24 vol-6)

Fixing Charges :

Fixing all types and allcapacities fluorescent / false ceiling/spotIight/ LED fittings indoor on the wall/ ceiling/rafters / girders using 23/0.0076 twin twisted PVC insulated wires, ...

Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing S hook together with supplying and fixing a 5 ampers ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated...

Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or rackets with bolts and nutsand a 5 amps, ceiling rose with...