Provn of security wall and fencing at Chettri Enclave under GE (Utilities) Udhampur.

Amount

Excavation in trenches not exc 1.5m wide and not exceeding 1.5m in depth and not exceeding 10 sqm on plan, and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge.

Returning filling in soil including spreading leveling watering and well ramming in layers not exceeding 25 cum complete all as specified and directed by Engr-in-Charge.

Removing excavated material not exceeding 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

Cement concrete M-15(Nominal mix) using 40 mm graded crushed stone aggregates in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge.

Brick work with sub class 'B' straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

PCC 1:2:4 M-15, type B-1(using 20mm graded stone aggregates) as in coping, fixing angle iron etc (including necessary form work) complete all as specified and directed by Engr-in-Charge.

Rendering 15 mm thick on fair face of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Mild steel work such as angle iron post ,flat iron in fencing including cutting as making double swan neck i.e "Y" shaped including welding with proper overlapping & welding MS plate with angle iron bottom as directed drilling holes notching for wire etc embedded in concrete fixed vertically conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

Glavanised 2 stranded steel barbed wire 2.24 mm dia, barbed with 2.00 mm dia barbs at 75 mm spacing, straining and fixing to any standard rails and straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire stapples or steel pins etc complete all as specified and directed by Engr-in-Charge.

Preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed by Engr-in-Charge.

Preparation of new plastered surfaces of wall or concrete surfaces and applying two coats of cement based paint on a coat of primer complete all as specified and directed by Engr-in-Charge.

110 mm dia PVC pipe (SWR) as in weep holes complete all as specified and directed by Engr-in-Charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, side & soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed by Engr-in-Charge.

TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 14.00 here-in-before but 5mm dia and over upto and including 10mm in stirrups, spacers and binders complete all as specified and directed by Engr-in-Charge.

RCC M-25 (Design Mix) for columns, pillars, piers, post and struts complete all as specified & directed by Engr-in-Charge.

RCC M-25 (Design Mix) in foundations, including rafts, footings, foundation beams, plinth beams and mass concrete complete all as specifed and directed by Engr-in-Charge.

RCC M-25 (design mix) as in beam & lintels over 1.50m span complete all as specified and directed by Engr-in-Charge.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc fair finished surface of concrete complete all as specified and directed by Engr-in-Charge.

Formwork to sides of columns rough finished surface of concrete complete all as specified and directed by Engr-in-Charge.

10 mm thick rendering on fair faces of brick surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Rendering 15 mm thick on other than fair face of brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Mild steel framed work such as grills, gratings with ends of bars shouldered or reveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar works, conforming to Fe-290, Gde E-165 complete all as specified and directed by Engr-in-Charge.

Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, will ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts,two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing in Fe-410W Gde E-250 quality A complete all as specified and directed by Engr-in-Charge.

Treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each, with tar or coal tar including preparation of surfaces, complete all as specified and directed by Engr-in-Charge.

Forming Square grooves in plaster n. exc. 12mm deep and n. exc. 15mm on face of internal and external surfaces, complete all as specified and directed by Engr-in-Charge.

Concertina coil 600mm dia laying on the Y shape angle iron post and binding the each coil with wire complete all as specified and directed by Engr-in-Charge.

Dismantling post or struts (wood, steel or RCC including barbed wire) any position, including taking out embeded portion,concrete, brick work, masonary etc and making good disturbed ground complete all as specified and directed by Engr-in-Charge.

M/S GURBACHAN SINGH

RAMAN CONSTRUCTION CO

V K Sales and Construction Co

M/S Inderjit Sharma and Co.

M/s Rukmani Construction Company