REPAIRS AND MAINT OF CERTAIN B/R AND E/M WORKS TO CADET MESS NTT DSC ACCN VYAS LIBRARY AND QM FORT AT NDA KHADAKWASLA

Amount

S&F in repairs 100 mm Stain less Steel Butt hinges, heavy weight, cold rolled, etc complete all as specified and as directed.

S&F in repairs 125 mm Stain less Steel Butt hinges, heavy weight, cold rolled, etc complete all as specified and as directed.

S&F in repairs 150 mm Brass plate hinges, heavy weight, cold rolled, etc complete all as specified and as directed.

S&F in repair for Double action spring hinges, mild steel with steel wire spring, stove enamelled, black etc complete all as specified and as directed.

S&F in repairs 55 mm dia, 70 to 80 mm height brass, polished cupboard / door knobs fixed with nut, screw and washer of mild steel, bright finished etc all as specified and as directed.

S&F in repairs extruded brass plate handle, fabricated type polished bright, 175mm long of shape as directed

S&F in repairs extruded brass alloy handle, fabricated type polished bright, 150mm long, of shape as directed

S&F in repairs extruded aluminium alloy Plate handle 'D' Type fabricated type anodized 150 mm long etc all as specified and as directed.

S&F in repairs decorative type Brass, sliding door bolt 300mm long with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc all as specified and as directed.

S&F in repairs Hat and coat hooks solid body made up of aluminium 175mm to 250mm etc all as specified and as directed.

S&F in repairs two way coat hooks solid body made up of SS 50mm to 60mm etc complete all as specified and as directed.

S&F in repairs Aluminum anodized barrel tower bolt of extruded section 150mm long etc complete all as specified and as directed.

S&F in repairs Brass barrel tower bolt, heavy 450mm long, with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified and as directed.

S&F in repairs Brass barrel tower bolt,heavy 600mm long, with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified and as directed.

S&F in repairs 150mm floor door stopper of brass alloy body and tongue, anodised, with hard drawn steel spring fixed in floor etc complete all as specified and as directed.

S&F in repairs wooden door stopper of size 100mm x 60mm x 30 to 35mm thick fixed to chowkats with 50mm SS butt hinges with ss screws etc complete all as specified and directed.

S&F in repairs brass wire type 1 gate and shutter, hooks and eyes 150mm etc complete all as specified and as directed.

S&F in repairs brass wire type 1 gate and shutter, hooks and eyes 200mm etc complete all as specified and as directed.

S&F in repairs Brass rod 30mm dia fixed including brackets complete for fixing in repair by brass screws etc complete all as specified and as directed.

S&F in repairs Plain Brass Sheet 3 to 5mm thick fixed to door with brass screws etc complete all as specified and as directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

S&F in repairs steel curtain rod 20mm dia fixed including fancy type brackets and 6 hooks for each rod complete for fixing in repair etc complete all as specified and as directed. Note for item No.1 to 22 : Brass screws shall be used for brass items and for rest all fittings and fixtures SS screws to be used

Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 sqm each . Note : (i) The rates for necessary scafolding required shall be deemed to be included.

Resecuring or easing & adjusting and refixing in same opening including taking down shutters if necessary and fill the gap, hole, or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door necessary grinding, sanding for getting smooth surface, repair/replacement of damaged rail/panel of any description n.exc 2 sqm each . Note : (i) Rate deemed to be inclusive of 1st class hardwood plain panel, style, rail required to be replaced of size matching wih existing and making the surface good by necessary polishing/painting/oiling (ii) The rates for necessary scafolding required shall be deemed to be included.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads.

S&F 3mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5Sqm in each pane.

S&F 4 mm thick one side ground glass sheet ordinary quality and glazing with oil putty/ wooden beading n.exc 0.5Sqm in each pane.

Taking down Chowkhats or frames not exc. 1.5 sq. m each etc complete all directed

Taking down Chowkhats or frames exc 1.5 sq. M but n exc 4 sq. M each etc complete all directed

M&L for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed etc complete all as specified and directed

Taking down shutters of any description n.exc 1 Sqm each

ditto item No 23 above but exc 1 Sqm and n.exc 2 Sqm each as directed.

S&F factory made 35mm thick 1st class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, supplied and fitted to chowkats, etc complete all as specified and directed

S&F factory made 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, both faces is covered with decorative face veneer with lipping / frame to match etc complete all as specified and as directed

S&F factory made 30mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauze, etc. ( without sash bars) edges of framing plain, chamferred or rounded fitted with cut and mitered bends for securing glass etc size of members of shutters as specified in as Part I Ses 8 Cl 8.20 (a), with synthetic enamal paint complete all as specified and directed.

S&F 100 mm Stain less Steel Butt hinges, heavy weight, cold rolled, etc complete all as specified and as directed.

S&F 125 mm Stain less Steel Butt hinges, heavy weight, cold rolled, etc complete all as specified and as directed.

S&F extruded brass plate handle, fabricated type polished bright, 175mm long of shape complete all as specified and directed.

S&F extruded brass plate handle, fabricated type polished bright, 150mm long, of shape complete all as specified and directed.

S&F extruded aluminium alloy Plate handle 'D' Type fabricated type anodized 150 mm long etc complete all as specified and as directed.

S&F decorative type Brass, sliding door bolt 300mm long with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc complete all as specified and as directed.

S&F Aluminum anodized barrel tower bolt of extruded section 150mm long etc complete all as specified and as directed.

S&F Brass barrel tower bolt, heavy 450mm long, with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified and as directed.

S&F Brass barrel tower bolt, heavy 600mm long, with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified and as directed.

M&L for preparation of new wooden surfaces and applying two coats of Synthetic enemal paint over a coat of pink primer etc complete all as specified and as directed

M&L for prepararion of wood surfaces and applying two coats of Melamine wood polishing by mechanical method (gun spray) of any description width or girth over one coat of melamine wood primer with wood fillar if necessary etc complete all as specified and as directed

Dismantling of timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section fixed as in framed work.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards /slabs / blankets, any thickness, including cover fillets complete all as specified and directed.

M & L for 4mm thick Non Asbestos cement plain sheet 600 x 600 for ceiling and including anodized aluminium grid work 610 x 610 mm with using 36.5mmx23.5mmx 1.5mm thick main tee, 23.5 x23.5mmx1.28mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 4.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 610x610mm complete all as specified and directed.

S&F asbestos cement plain building boards 4mm thk, fixed to timber /GI/MS framework with screws complete all as specified and directed.

S&F 2nd class hardwood Plain fillets. square, rectangular or triangular in section , clean sawn, secured with nails or brads fixed in repairs.exc 3 sq cm & n exc 6 sqcm complete all as specified and directed.

S&F in 2nd class hardwood Plain fillets. square, rectangular or triangular in section , clean sawn, secured with nails or brads fixed in repairs.exc 6 sq cm & n exc 13 sqcm complete all as specified and directed.

Material and labour in repairs for 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber frame work complete all as specified and directed.

M&L in repairs for 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section and at any position as in unframed work

M&L for second class hard wood in scantling exc 40 Scm in area clean sawn for unframed work

S&F in repair 20mm thick second class hardwood clean sawn boards or planks, width n exc. 25 cm

S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) with mild steel chromium plated or aluminised hinging device including connection to drown pipe and flushing pipe complete all as specified and directed. Make : Jaquar cat Part No ECS-WHT-355PN or ECS-WHT-355SN or equivalent in makes as mentioned at makes list in PS

S&F in repairs Vitreous water closet (squatt pattern) 'long pan', size 580/630mm white with 'P' or 'S' trap, front or back inlet any pattren complete fixed in repairs complete all as specified and directed. Make : Jaquar Cat Part No ECS-WHT-451LE or equivalent in makes as mentioned at makes list in PS

S&F in repairs plastic water closet seat cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs PVC low level flushing cistern including brackets 10 litre capacity with inlet ball valve float, handle,flush pipe etc. complete fixed as in repairs etc complete all as specified and directed. Make : Cera Cat part No B1010107 or equivalent in makes as mentioned at makes list in PS

S&F in repairs Toilet paper holder of stainless steel fixed in repair to walls with chromium plated brass screws complete all as specified and directed. Make : M/S Cera Cat part No F5007110, M/S Shri Laxmi Industries (P) Ltd, Classic or equivalent in makes as mentioned at makes list in PS

S&F in repairs for providing two way bib cock cast copper alloy fancy type screwed down high pressure with cruntch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shunk and cup complete all as specified and directed. Make : Cera cat part No F1015163CH/VIC 2W bib CK 1H or equivalent in makes as mentioned at makes list in PS

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. Make - Cera cat part No 8030104 , Jaguar ALD CHR-593 or equivalent in makes as mentioned at makes list in PS

S&F in repair for Liquid soap container of glass bottle with stainless steel fittings fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) etc complete all as specified and as directed, Make : Jaquar Cat part No CAN-CHR-1135N. or equivalent in makes as mentioned at makes list in PS

S&F in repairs stay suitable for health faucet complete all as specified and as directed, Make - Jaguar or euivalent

S&F in repairs vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (including of fixing supply pipe to flushing cistern, trap and waste pipe) Make : Cera CALORIGO Cat part No S4020114, Cera CAPRIANA Cat part No S4020112 or equivalent in makes as mentioned at makes list in PS

S&F in repairs urinal Valve Auto Closing System with Built-in Control Cock with Wall Flange alloy screwed for iron pipe 15 mm bore complete all as specified and directed. make: Jaguar PRS-077 or equivalent in makes as mentioned at makes list in PS

S&F in repairs CP urinal spreader fixing with 15mm dia pipe etc complete all as specified and as directed.

S&F in repairs CP urinal connection pipe 15 mm bore 115mm length etc complete all as specified and as directed.

S&F in repairs counter top wash hand basin vitreous china white (angle back) of size 600x480mm, CI bracket 15mm dia polythene connection and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and directed. Make : Cera Cat Part No S2030103, or equivalent in makes as mentioned at makes list in PS

S&F in repairs for Bottle trap of stainless steel having minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms) etc complete all as specified and as directed.

S&F 15mm pillar taps, self closing, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed Make : Cera cat part No PRS-031L65 or equivalent in makes as mentioned at makes list in PS

S&F in repairs15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. Make : Cera cat part No F2002103 or equivalent in makes as mentioned at makes list in PS

S&F in repairs for PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed.

S&F in repairs CP Knob, suitable for basin mixture complete all as specified and as directed. Make - Jaguar or euivalent

S&F in repairs SS gratings 100/125mm dia complete all as specified and as directed.

S&F in repairs PTMT gratings 100/125mm dia complete all as specified and as directed.

S&F in repairs 32mm dia waste coupling of ss (half or full threaded) (minimum -weight 32mm-45 gram/40 mm-60gms complete all as specified and as directed.

S&F in repairs 32mm dia PVC (flexible) waste pipe for wash hand basin complete all as specified and as directed.

S&F in repairs brass chromium plated tubular towel rail 30mm dia D type 60cm long between flanges etc complete all as specified and directed. Make : Cera Cat part No F5006103 or equivalent in makes as mentioned at makes list in PS

S&F in repairs for providing long body bib taps with wall flange ,cast copper alloy chromium plated 15mm fancy type with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. Make : Cera cat part No F1015151,Prayag model No 6509 (Matrix) or equivalent in makes as mentioned at makes list in PS

S&F in repairs chromium plated 2 in 1 wall mixer with provision for both telephone shower and over head shower with 115mm long bend pipe and wall flange complete all as specified and directed. Make - Cera Cat part No F2002401, Jaguar Cat No CON-CHR-273KNUPR) or equivalent in makes as mentioned at makes list in PS

S&F in repairs CP Knob, suitable for wall mixture complete all as specified and directed. Make - Jaguar or euivalent

S&F in repairs for stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore of size 15mm dia complete all as specified and directed. Make : Cera cat part No F8040204 or equivalent in makes as mentioned at makes list in PS

S&F in repairs brass chromium plated shower rose 125mm size complete all as specified and directed

Dismantling of cast iron 110/75 mm bore pipes jointed in cement motar including all fittings complete all as specified and directed

S&F for providing cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints fixed to walls using pipes 100mm bore pipes etc complete all as specified and as directed.

S&F CI bend 100 mm bore with oval access door etc complete all as specified and as directed..

S & F 100 mm size branch piece , single (equal or unequal) ordinary or inverted (spigot or socket type) or with parellel branches etc complete all as specified and as directed..

S&F CI cowl 100 mm size etc complete all as specified and as directed.

S&F for providing cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints fixed to walls using pipes 75mm bore pipes etc complete all as specified and as directed.

S&F CI bend 75 mm bore with oval access door etc complete all as specified and as directed..

S & F 75 mm size branch piece , single (equal or unequal) ordinary or inverted (spigot or socket type) or with parellel branches etc complete all as specified and as directed..

S&F CI cowl 75 mm size etc complete all as specified and as directed.

Taking down SWG / rainwater / PVC pipes 100mm / 75 mm dia (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., complete all as specified and as directed..

S&F Type B, 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and as directed..

S&F 110mm dia PVC (SWR) bends any radius ccomplete all as specified and as directed..

S&F 110mm dia PVC (SWR) junction single(single T), Type B complete all as specified and as directed..

S&F 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal, Type B, complete all as specified and as directed..

S&F Type B, 110mm dia PVC (SWR) vent cowl complete all as specified and as directed..

S&F Type B, 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed

S&F Type B, 75mm dia PVC (SWR) bends any radius etc complete all as specified and directed

S&F 40mm dia Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. Cm with all fittings Tee and Elbow etc and fixed to wall , floor etc.. complete all as specified and directed

Taking up or down ,15mm dia steel tubing and connections incl cleaning for re-fixing or removal to stores etc all as specified and as directed.

Taking up or down , 20mm dia steel tubing and connections incl cleaning for re-fixing or removal to stores etc all as specified and as directed.

Taking up or down , 25mm dia steel tubing and connections incl cleaning for re-fixing or removal to stores etc all as specified and as directed.

S&F 15mm dia bore medium grade galvanised tubes with all fittings and fixed to wall, floors etc.. complete all as specified and directed

S&F 20mm dia bore medium grade galvanised tubes with all fittings and fixed to wall, floors etc.. complete all as specified and directed

S&F 25mm dia bore medium grade galvanised tubes with all fittings and fixed to wall, floors etc.. complete all as specified and directed

Refixing old steel tubing and conection in new or old position on wall, ceiling, floor etc.. 15 mm bore pipe. complete all as specified and directed

Refixing old steel tubing and conection in new or old position on wall, ceiling, floor etc.. 20 mm bore pipe complete all as specified and directed

S&F in repairs PVC flush tank ball cock set complete all as specified and directed

S&F in repairs spindle for 15mm/20mm CP / brass bib cock, stop cock & concealed stop valves, WHB mixtures etc complete all as specified and directed.

S&F in repairs 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

S&F in repairs 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

S&F in repairs 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

S&F in repairs 40 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

S&F in reairs brass mortice lock,100mm , 4 liver verticle type complete all as specified and directed

S&F in repairs door closer hydraulically regulated,aluminium (die cast) body ,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

M& L for cutting holes in brick wall / stone wall / PCC block walls exc one brick but not exc two brick in cement mortar for inserting holdfasts and making good dismantling portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required complete all as specified and directed

Labour for small repair to hinges, tower bolt, handle, latches, sliding door bolt, towel rack etc complete all as specified and as directed.

Febrication only Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') etc complete all as specified and directed

Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc.complete all as specified and directed

M&L for rendering 15 mm thick plaster in CM (1:6) on wall surface finished even and smooth without using extra cement complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for colour Glazed ceramic tiles in vertical surface 450x 300x 7mm or 300X 200X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick backing coat in CM (1:4) etc complete all as specified and as directed

M&L for colour Glazed ceramic joint free tiles in vertical surface 600x 300x 8-10mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick backing coat in CM (1:4) etc complete all as specified and as directed

M&L for light shed Double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in walls etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick backing coat in CM (1:4) etc complete all as specified and as directed

M&L for colour Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:4) etc complete all as specified and as directed

M&L for colour Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:4) etc complete all as specified and as directed

M&L for colour Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:4) etc complete all as specified and as directed

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid beded & pointed any type of morter complete all as specified and directed

M&L for 16 to 18 mm thick granite (of any type any colour) work (table rubbed 7 polished ) in window door cills/jambs, platform like in cement morter (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite etc complete all as specified and directed

M&L for 16 mm thick granite both side polished for urinal partition / vertical surfaces etc. in cement morter 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite etc complete all as specified and directed

M&L for Machine cut cudappah stone slab 20-25mm thick over 15 mm thick cement screed base in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed

M&L for granite work (lakha red, flamed where ever necessary) (table rubbed 7 polished ) thick granite stone slab (of any type ) work (table rubbed and polished ) as in floor, steps, jambs, pillars, window cills, laying over 15mm thick CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and making good for disturbed surfaces and chamfering for exposed edges,surfaces complete all as specified and directed

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and including polishing complete over and including 20mm thick screed in CM (1:6) complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed

M&L for Bees-wax polishing on previously polished surfaces of any description, width or girth including cleaning and preparing the surface etc complete all as specified and as directed.

M&L for sunken treantment to Floors of toilets/Baths/WCs/ Kithcen as under :- (a) Clean the sunken portion of toilet/Bath/WC/Kitchen throughly to remove laitance, dirt, dust, etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar ("Dr Fixit" Pidicrete URP" or eqvt) (c) Sanitary pipes entering through walls and floor shall be sealed with "Dr Fixit Bathseal Tape" and the gaps to be grouted with non-shrink cementitous grout "Dr Fixit Bathseal Grout" or eqvt. Nahani traps, etc to be fitted securely and the gaps around it to be grouted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating "Dr Fixit Bathseal Plus" or eqvt on all angle fillets by brush and cover it with 100 mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. (e) In the remaining area, in dry sustrate condition brush apply first coat of the same coating and further apply second coat when first coat is dry. Extend the coating upto 150 mm above the FFL. Above FFL, another cementitious waterproof coating "Dr Fixit Pidifin 2 K" or eqvt can be further applied right upto 2.1 mm to waterproof the shower area also, it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed M 15 type B0 mixed with intergral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 100mm 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/ Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready-to -make Tile grouts of appd makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc

Taking down collapseable shutter area exc 4 sqm but n exc 15 sqm .complete all as specified and directed

S&F of collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as spefified, erected in position and securing runners with holdfasts and brackets complete all as per clause 10.24 of SSR Part - I 2009. complete all as specified and directed

M&L for servicing, overhauling, greasing, easing of existing Collapsible gate of any area or thickness and applying one coat of synthetic enamel paint after preparation of old decorated surfaces on both surfaces etc complete all as specified and directed

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel/iron surface of any description over 10 cm in width or girth complete all as specified and directed

M&L for complete removal of existing treatment form wall to make the surface free from dust, loose paint and loose plaster by scrapping manually / mechanically as directed by engr-in-charge (nails, screws if any to be removed properly before scraping) complete all as specified and directed.

All as per item No 147 above but for Ceiling surface complete all as specified and as directed.

M&L for providing and applying water proof cement base putty of 1mm thick over prepared old plastered / old painted surface to prepare the surface even and smooth upto desired finishes by manually / mechanical means etc complete all as specified and directed.

All as per item No 149 above but for Ceiling surface complete all as specified and as directed.

M&L for one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied on wall with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed.

All as per item No 151 above but for Ceiling surface complete all as specified and as directed.

M&L for applying two coats of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper shall be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

All as per item No 153 above but for Ceiling surface complete all as specified and as directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying one coat of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

All as per item No 155 but for Ceiling surface complete all as specified and as directed.

M&L for one coat of acrylic water based exterior grade primer on wall @ 0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for Two coats water based premium acrylic smooth exterior emulsion paint on wall of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed.

M&L for preparing old surface with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying One coat of water based premium acrylic smooth exterior quality emulsion paint on old wall surfaces of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in one coat @ 0.75 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over preparing surfaces with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. etc complete all as specified and directed.

M&L for preparation of old wooden surface smooth with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and applying one coat of synthetic enamel paint exc 10 cm width or girth with fully automatic airless spray machine complete all as specified and directed.

M & L for one coat of synthetic enamel paint with fully automatic airless spray machine including preparation of old painted surfaces of wood, wood based surfaces, AC sheet in ceiling exc 10 cm width or girth etc in ceiling incl filling of gaps between wooden planks with putty,POP complete all as specified and directed.

M&L for preparing the old wooden surfaces of any description, with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and apply one or more coats of french polishing till the desired finish is obtained complete all as specified and directed.

M&L for prepararion of wood surfaces and applying one coat of Melamine wood polishing by mechanical method (gun spray) of any description width or girth with wood fillar if necessary to fill the crack and holes etc complete all as spd and as directed

M&L for one coat of aluminium paint incl preparation of old painted steel surfaces exc 10 cm width or girth complete all as specified and directed

M&L for one coat of synthetic enamel paint incl preparation of old painted steel surfaces exc 10 cm width or girth complete all as specified and directed

M&L for one coat of Subsequent cement based paint on wall surfaces incl preparation of old treated surface complete all as specified and directed.

M&L for one subsequent coat of white washing on Ceiling surfaces incl preparation of old treated surface complete all as specified and directed.

M&L for preparation of old treated wall surfaces and applying one coat of luster paint using "Electrically Operated Airless spray technology Machine" all as specified and as directed.

M&L for prepration of old painted concrete surface and apply one coat of Plastic emulsion paint on walls exc 10 cm width or girth etc complete all as specified and directed

All as per item No. 169 above but in ceiling etc complete all as spd and as directed.

Taking up/down plants or vegetation growth from wall upto roof level by means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 150 sq cm superfical area and not exc one brick depth) using brick bats /aggregate and plastering in cement mortar (1:4) to distrubed portion and applying two coats of cement base paint / weather coat to match the existing surface upto forth floor complete all as specified and directed

Fixing only Flag post with nails, screws or any suitable means at walls etc complete all as specified and as directed

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete etc complete all as specified and as directed.

Repair / maintenance of internal light fitting of any type like tube lights / wall bracket light fittings / ceiling lights / bulk head light / mirror lights incuding switches etc in its position, testing all the compenents / parts, wiring etc, identifying and replacing the defective components like tube rod, side holders, holders, lamps, switches, sockets, ceiling roes, etc all as directed by Engr-in-charge. Note: (i) The rate against the above mentioned item is deemed for cost of labour only. (ii) Cost of spares like capacitor, lamp holder, connector, connection wire etc. replaced against above mentioned item will be measured & paid for separately under respective items of Sch 'A' here-in-below. (iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily to collect the list of defects and will submit the completion report on following day before 0900hrs to the JE E/M. (iv) The contractor shall rectify the defects and make the light fittings functional within 24 hours from the time the list of defective lights is handed over to him / his rep by the concerned JE E/M. In case the light fitting is not made functional for whatsoever reason within the specified time limit, an amount of Rs 100/- per such defective light fitting per day will be recovered from the amount due to him through RAR / Final Bill.The contractor shall engage separate team of technicians / repair for each at Cadet Mess, NTT, DSC Accn, Vyas Library, and QM Fort. (v) The contractor shall maintain proper record of repair / maint in a binded compliant register and complaint slip books duly signed by the user and bringing out the details of spares replaced and get it authenticated from concerned JE E/M on daily basis. The contractor shall put up the maint record register to Engineer-in-charge for inspection every Monday or as and when asked for. (vi) The contractor shall maintain sufficient stock of spares / material required for repair / maint of light fittings with the concerned JE E/M against the supply only items here-in-below.

(a) Supply only Retrofit pendant lamp holders suitable for table lamps or wall bracket light fittings or for ceiling lights

(b) Supply only PVC / polycarbonate Angle/Batten type lamp holders retrofit type all as specified and directed

(c )Supply only switch piano flush type 5 Amps SP one way all as specified and directed.

(d) Supply only switch piano flush type 20 Amps SP one way all as specified and directed

( e)Supply only socket outlet 3 pin 5A flush type complete all as specified and directed

(f)Supply only socket outlet 2 in 1 3 pin 5 and 15 Amp flush type complete all as specified and directed

(g) Supply only ceiling rose, 3 terminals /PVC/Polycarbonate, isolated body all as specified and directed

S&F in replacement of fan regulator electronic step type suitable for 1200/1400 mm sweep fan as per the sample provided complete all as specified and directed

S&F in replacement of modular fan regulator, 2 module, suitable for ceiling fan of 1200/1400mm sweep complete all as specified and directed

S&F in replacement of Modular socket 6 A 2/3 Pin 2 module. complete all as specified and directed

S&F in replacement of Modular socket 6A/16A - 2/3 Pin 2 Module. complete all as specified and directed

S&F in replacement of modular switch 1 way 10 A 1 module. complete all as specified and directed

S&F in replacement of modular switch 1 way 20 A 1 module with neon indicator. complete all as specified and directed

S&F in replacement for modular switch 2 way 10 A 1 module. complete all as specified and directed

S&F in replacement of 1 and 2 module Blanking plates. complete all as specified and directed

S&F in replacement of door bell AC 230 volts single phase ding dong typecomplete all as specified and directed

M&L for securing loose wiring and repair to point wiring with necessary rigid non metalic PVC casing caping double lock type ISI marked inclusive all accessories complete as specified and directed.

Taking down carefully copper/aluminium point wiring (light/fan/socket) including all accessories wire, casing caping/conduit, screws etc and making good the disturbed surfaces complete all as specified and directed

M&L for point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box suitable for modular type switches, sockets, fan regulator etc for following :- (a) One light/Fan point controlled by one way switch 6 Amps 240 volts

(b) All as per item No 193 above but One 3 pin 6 Amps socket out let point on independent board.

(c ) All as per item No 193 above but One 3 pin 6 Amps socket out let point on same board.

(d) All as per item No 193 above but One light point controlled by two 6 Amp two way switches .

M&L for point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box suitable for 15 Amps socket outlet power point independent circuit complete all as specified and directed

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc all as specified and directed

S&F in replacement of GI pipe bracket of 25 mm dia 1 mtr long bend to shape for street light fitting made out of 25 mm dia GI light grade pipe fixed on pole using suitable FI clamp including necessary new nut, bolt and washer complete all as specified and directed.

S&F in replacement LED security light fiitting 30 W,IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embeded PC cover having TOP opening seperate driver compartment complete all as specified and directed. Make: Lukar Cat Part:LSTE30(Sleek series) or equivalent in Havells / Wipro

S&F in replacement stator motor suitable for light duty fresh air ventilation fan of any sweep(approx 225/250mm) and replacing plywood of not less than 15mm with duly coated with synthetic enamel paint as per the existing arrangement.

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with conduit accessories and copper cable 2.5 sqmm continuous earth wire drawn on wall/ceiling/ through stair case/wooden surface with all accessories and incl cutting of existing surfaces of any type and making good to match with the existing surfaces acrylic sheet work complete all as specified and directed. Note: Two runs of 2.5 Sqmm cable with 01 run of 2.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

All as per item no 202 above but 2 x 4 sq mm with one continuous earth wire of size 4.0 sq mm Note: Two runs of 4 Sqmm cable with 01 run of 4 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

All as per item no 202 above but 2 x 6 sq mm with one continuous earth wire of size 6.0 sq mm Note: Two runs of 6 Sqmm cable with 01 run of 6 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

Taking down carefully sub main wiring of any type and size and making good disturbed surfaces complete as directed.

Taking down ceiling fan/exhaust fan of any sweep for servicing / repairing / maintenance, opening up, identifying and replacing the defective parts, cleaning, greasing,etc, reassembling and hanging up/fixing back at its original position, connecting up and testing complete all as directed. Note : 1.Cost of spares such as capacitors, bearings etc will be measured and paid for separately under respective Item of sch A as supply only.

(a)Supply only capacitor of 1.5 mfd for wall fans all as specified and directed. Make: Epcos/Tibcon/Crompton

(b) Supply only capacitor of 2.5 mfd for ceiling fan/exhaust fan all as specified and directed. Make: Epcos/Tibcon/Crompton

(c) supply only bearing No.6201/6202/6203/6204 or any other No matching to the existing size and suitable for ceiling fan/exhaust fan/wall mounted fan of approved make

(d) supply only aluminium fan blade for exhaust fan of any sweep/make as per the sample given by the site-in-charge.

Disconnecting electric connection and taking down carefully fan of any type and size/sweep as described below, removing the burnt winding of fan motor rewinding with super enarneled copper winding wire of suitable gauge or of matching size to the exisiting wires including all insulating material such as insulation paper sleeve, tape, varnishing etc and reassembling, testing, transporting back to site and refixing to original position all as directed (a) Celling fan of size 1200/1400mm sweep.

(b) All as per item No 211 above but Air circulator fans/Pedastal fans of size 600/450 mm sweep wall mounting Oscillating type

(c) All as per item No 211 above but Wall mounted fans size 350/400 mm sweep Oscillating.

(d) All as per item No 211 above but Exhaust fan of 225/300 mm sweep.

M&L for Preparation of old surface of exhaust fan of any sweep by removing old paint using paint remover or by burning off using blow lamp and cleaning with cloth and Spray painting complete exhaust fan with superior quality synthetic enamel paint (Smoke gray) after applying primer complete all as speicified and directed.

All as per item No 215 above but Air circulator/Pedestal of size 450/600 mm sweep with superior quality enamel paint (Grey) complete all as directed.

All as per item No 215 above but Ceiling fan of size 1200/1400 mm sweep with superior quality enamel paint ( Milk White) complete all as directed.

S&F in replacement MCB DB 04 way SPN (double door) sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar, flush/surface mounting complete including taking down the existing DB of any type & size by removing from existing circuits and refixing the new DBs and circuits and making good the distrubed surface as required at site complete all as specified and directed. Make: Havells QVE Plus DHDMSHODOW04 or equivalent in make as mentioned at makes list in PS

All as per item No 218 above but 08 way SPN DB (Double door) Make: Havells QVE Plus DHDMSHODOW08 or equivalent in make as mentioned at makes list in PS

S&F in replacement factory made epoxy powder coated Distribution Board TP & N 4 way double door (VTPN MCCB DB) MCCB as In comer, and MCB as outgoing with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified Note: MCCBs and MCBs will be measured and paid seperately under respective Sch A item in the schedule

S&F in replacement of MCB single pole 6-32 Amps working on 240 volts, 50 HZ AC, 10 KA 'C' curve complete all as specified and directed.

S&F in replacement of MCB DP 6-32 Amps working on 240 volts, 50 HZ AC, 10 KA 'C' curve complete all as specified and directed.

S&F in replacement of MCB SPN 40- 63 Amps working on 240 volts, 50 HZ AC, 10 KA 'C' curve complete all as specified and directed.

S&F in replacement of MCB TP 40-63 Amps working on 415 volts, 50 HZ AC, 10 KA ,'C' curve complete all as specified and directed.

S&F on repiars MCCB with rating of 100 Amps, 415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and directed.

S&F in repairs MCCB with rating of 125 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and directed.

S&F in replacement of Metal body ventilation fan of 225 mm sweep inclduing replacing the plywood as per the site requirement complete all as specified and directed. (Note: Old Exhuast fan should be deposited in MES store yard) Make: Bajaj MAXX AIR/ Crompton Greaves Trans Air/ Havells VENTILAIR DB NEO or equivalent makes as mentioned at makes list in PS

S&F in replacement of Plastic ventilation fan with BLDC motor, energy efficient of 200/250/300 mm sweep inclduing replacing the plywood as per the site requirement. Note: Old Exhuast fan should be deposited in MES store yard) Make: Atomberg/ Crompton Greaves Trans Air/ Havells.

S&F in replacement of high speed wall mounted fan of sweep 400 mm,,Full copper motor,auto thermal overload protection,compact style and powder coated gurads & pull cord switch for speed regulation and oscillation control including connectng up the power cord to the socket and necessary fixing accessories all as specified and directed. Note: Old wall mounted fan should be deposited in MES store yard) Make:Crompton or equivalent in Havells/Bajaj

S&F in replacement sheet metal enclosures Single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts complete with all accessaries etc all as directed

Supply & fix in replacement neon lamp indicator square/round type complete all as specified and directed.

Supply and fix in replacement metal clad plug top 3 pin, 20 amps, ISI marked heavy duty complete all as specified and directed.

S&F in replacement plug top 3 pin, 15/16 amps, 230 volts, ISI marked complete all as specified and directed.

S&F in replacement plug top 3 pin, 5 amps, 230 volts, ISI marked complete all as specified and directed.

M&L in replacement of ply wood sheet of 10 mm thickness for Exhaust fans and cutting to the size as required at the site including fixing the same with necessary nuts and bolt arrangement complete all as specified and directed.

M&L for replacing the down rod of ceiling fans with 5 feet GI ceiling fan hanging down rod with necessary clamp accessories complete all as specified and directed.

M&L in replacement of acrylic sheet of 4mm thickness cutting to the size as required at the site including fixing the same with necessary screw arrangement complete all as specified and directed.

S&F in replacement PVC insulated cable 2 core stranded copper conductor 0.5 sqmm complete all as specified and directed.

S&F in replacement PVC insulated cable 2 core stranded copper conductor 1 sqmm complete all as specified and directed

S&F Picture light LED (warm white) fitting of 1x12 Watt individual LED lenses bronze coloured complete all as specified and directed. Make: Philips PHILIPS 919216000000 12W Picture Light, Bronze or equivalent makes as mentioned at makes list in PS

S&F in replacement of 1x10W,230V, LED batten suitable for indoor application of color temperature 6000K surface /wall mounted LED batten including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed.

S&F in replacement 1x20 watt,230V surface and wall mounted emergency LED batten having backup upto 4 hours with polycarbonate housing and integrated electronic electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified . Make: Luker LTGT520 or equivalent makes as mentioned at makes list in PS

S&F in replacement surface mounted LED Panel lights size of 600mm x 600MM x 35mm 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Note: The quoted price shall include the cost of Light and its driver. Make:Luker Cat part No. LNPSRS40 or equivalent makes as mentioned at makes list in PS

S&F in repalcement surface mounted LED Panel lights size of 1200mm x 300MM x 35mm 48 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Note: The quoted price shall include the cost of Light and its driver. Make:Luker Cat part No. LNPSRS48 or equivalent makes as mentioned at makes list in PS

S&F in replacement recess type LED ceiling lights 20 W LED with ceiling cut out of Ø 160 mm, 6000K Environmental friendly, energy saving, recess mounted downlighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and directed. Make: Luker cat part no. LDR20 or equivalent makes as mentioned at makes list in PS

S&F in replacement for white cover plate with frame 12 module.Make:As per the sample given complete all as specified and directed.

S&F in replacement for white cover plate with frame 8 module.Make:As per the sample given complete all as specified and directed.

S&F in replacement for white cover plate with frame 6 module.Make:As per the sample given complete all as specified and directed.

S&F in replacement for white cover plate with frame 4 module.Make:As per the sample given complete all as specified and directed.

S&F in replacement for white cover plate with frame 3 module. Make:As per the sample given complete all as specified and directed.

S&F in replacement for white cover plate with frame 2 module. Make:As per the sample given complete all as specified and directed.

S&F in replacement for white cover plate with frame 1 module. Make:As per the sample given complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 12 module complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 8 module complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 6 module complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 4 module complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 3 module complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 2 module complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 1 module complete all as specified and directed.

Sunil Constructions