Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹32.2 LAccepted-AOC 24 824 GOVERDHAN COLONY MAIN BHIND ROAD GOLE KA MANDIR | 1 | Accepted-AOC Lowest tender | |
| 2 | 2₹32.9 L+₹67,764 (2.10%)Rejected-AOC | 2 | Rejected-AOC 2nd | |
| 3 | 3₹34.8 L+₹2.6 L (7.96%)Rejected-AOC | 3 | Rejected-AOC 3rd | |
| 4 | 4₹42.3 L+₹10.0 L (31.1%)Rejected-AOC | 4 | Rejected-AOC 4th |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
8 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TUGHLAKABAD
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
ADDITION/ALTERATION TO SECURITY WALL OF DGQA COMPLEX BADARPUR NEW DELHI UNDER GE (AF) TUGHLAKABAD
2022_MES_562353_1
GE/TKD-52/2022-23
Open Tender
Civil Works - Others
Item Rate
180 days
GE AF TUGHLAKABAD
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
8 documents required · 8 mandatory
₹500
GE AF TUGHLAKABAD
₹77,000
Yes
7 Mar 2023
10 Nov 2022
10 Dec 2022
17 Nov 2022
8 Dec 2022
24 Nov 2022
Amount
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed by Engr-in-charge.
Dismantling wrought iron or mild steel work of any description complete all as specified and directed by Engr-in-charge.
Demotion of brick work or stone boulder masonry built in cement mortar complete all as specified and directed by Engr-in-charge.
Demolition of RCC of any decryption and in any position complete all as specified and directed by Engr-in-charge.
M&L for brickwork with subclass 'B' bricks straight or curved on plan exc 6 m mean radius in CM (1:6) complete all as specified and directed by Engr-in-charge.
M&L for 10 mm thick rendering in cement mortar (1:4) on fair face of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for 15 mm thick rendering in CM (1:4) on other than fair face vertical surfaces of brick walls finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for preparation of newly plastered surfaces and applying two coat cement base paint on walls over a coat of priming plastered with alkali resistant priming complete all as specified and directed by Engr-in-charge.
Excavation in trenches n.exc 1.5 mtr deep and n.exc 1.5 mtr wide in soft/loose soil complete all as specified and directed by Engr-in-charge.
Returning, filling in including spreading, levelling watering & well ramming in layers n.exc. 25CM thick in soft/loose soil complete all as specified and directed by Engr-in-charge.
Spreading & levelling in layers n.exc. 25 CM thick well ramming including watering as required complete all as specified and directed by Engr-in-charge.
Removing excavated mtrl n.exc.50 Mtr & depositing where directed at a level n.exc.1.5Mtr above the starting point complete all as specified and directed by Engr-in-charge.
M&L for TMT bars 10 mm dia and over cut to length bent to shape required, including cranking and binding spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or secured with clips complete all as specified and directed by Engr-in-charge.
M&L for TMT bars 5 mm dia and over cut to length bent to shape required, including cranking and binding spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or secured with clips complete all as specified and directed by Engr-in-charge.
M&L for formwork to rough finish surface of flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr-in-charge.
All as per item No 15 above but sides of rectangular pillars, posts, columns etc. complete all as specified and directed by Engr-in-charge.
All as per item No 15 above but sides and soffits of beams, lintels etc. complete all as specified and directed by Engr-in-charge.
M&L for reinforced cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in columns, pillars, piers, posts complete all as specified and directed by Engr-in-charge.
M&L for reinforced cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in footings, foundation beams complete all as specified and directed by Engr-in-charge.
M&L for RCC (1:2:4) type B-1 using 20 mm graded stone aggregate as beams cantilever lintel over 1.5 m spacing using 20mm graded stone aggregate complete all as specified and directed by Engr-in-charge.
S&F for mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-charge.
S&F in repair galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or type at crossings with and provision of galvanised mild steel wire staples or steel pins, etc complete all as specified and directed by Engr-in-charge.
S&F concertina coil of reinforced punched (chrome rajor or blade wire) with barbed tap of 0.5 mm thick galvanised steel sheet and core wire of dia 2. 5 mm high tensile steel wire complete all as specified and directed by Engr-in-charge.
M&L for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete (below or above ground level) n exc 15 cm thickness complete all as specified and directed by Engr-in-charge.
M&L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in foundation filing & mass as in sub base concrete complete all as specified and directed by Engr-in-charge.
M&L for cement concrete work in pavement/ hard standing of flexural strength 40 kg/per square centimetre in field using 400 Kg of cement per cubic metre thickness of concrete 25 cm or less complete all as specified and directed by Engr-in-charge.
M&L for forming 12mm thick expansion joints, 150 mm thick concrete slab, filled with pre-formed bituminous filler and top 30 mm primer and sealed with sealing compound grade 'A' complete all as specified and directed by Engr-in-charge.
M&L for 75mm thick cement concrete (1:3:6) type C2 using 40mm graded stone aggregate as in sub-floors, sub-bases, etc.; complete all as specified and directed by Engr-in-charge.
M&L for sand filling under interlocking tiles 25mm thick including watering and consolidating complete all as specified and directed by Engr-in-charge.
M&L for 60mm thick machine pressed precast concrete interlocking paver tiles coloured and in different colour tiles any size and shape factory casted with grey cement and pigment and conforming to IS 15658-2006 of M-35 Grade and joints filled with sand including 25 mm thick sand cushion complete etc complete all as specified and directed by Engr-in-Charge.
M&L for chequered cement concrete tiles 20 cm x 20 cm x 25 cm thick set and jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm screed bed in CM (1:6) complete all as specified and directed by Engr-in-charge.
S&F Mild steel GDE Fe 410-W or Gde E-250 Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging doors fittings and hanging also fastening and fixing complete all as specified and directed by Engr-in-charge.
M&L for forming contraction (dummy) joints 65 mm deep x 10 mm wide filled with sealing compound grade 'A' complete all as specified and directed by Engr-in-charge.
M&L for pointing with cement mortar on old to random rubble masonry joints after removal/hacking out joints including existing pointing, cleaning of joints and applying cement slurry complete all as specified and directed by Engr-in-charge.
akenterprises
FUTURE ENGINEERING
M/S S.K.Electricals
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .