Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.4 LAccepted-AOC JAISALMER | BARMER | RAJASTHAN | 344001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹43.9 L+₹1.4 L (3.17%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹44.8 L+₹2.2 L (5.28%)Rejected-Finance 521 DR K L ACHAL VANSHI COLONY JAISALMER 345001 RAJ | JAISALMER | RAJASTHAN | 345001 | L3 | Rejected-Finance Not being lowest |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
26 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Jaisalmer
GE Army Jaisalmer - 345001
REPAIR TO PATH, HARDSTANDING, PLINTH PROTECTION AND CERTAIN BR WORKS IN VARIOUS UNITS AND OTM ACCN OF ZONE-I AT MIL STN JAISALMER
2022_MES_553883_1
8234/22-23/E8
Open Tender
Civil Works
Item Rate
180 days
Jaisalmer
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Army Jaisalmer
₹86,000
Yes
27 Feb 2023
23 Sept 2022
28 Oct 2022
23 Sept 2022
26 Oct 2022
7 Oct 2022
Amount
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles) complete all as specified and directed by Engineer-in-charge.
M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors & finishing the surface even & smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
M&L for Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-charge.
M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles) complete all as specified and directed by Engineer-in-charge.
M & L Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 etc complete all as specified and directed by Engineer-in-charge.
M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M & L Precast cement concrete block masonry with solid blocks PCC Type C1 (1:3:6) (using 20mm graded aggregate) exc 10cm in width and setting in CM 1:6 with demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling complete all as specified and directed by Engineer-in-charge.
M&L for rendering 15 mm thick on stone masonry surface in cement mortar 1:4 including water proofing compound and finished even & smooth without using extra cement, complete all as specified and directed by Engineer-in-charge.
M&L for prepration of new plastered wall surfaces of any description over 10cm girth or width, not otherwise described and applying two coat of Plastic emulsion paint (Camouflage/Normal pattern) over a priming paints plaster coat complete all as specified and directed by Engineer-in-charge.
Dismantling Trellis work (Jafri) one way, including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed by Engineer-in-charge.
M&L for 35mm thick precast cement concrete louvers and jallies type C-0 (1:3:6) using 12.50mm graded aggregate (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 complete all as specified and directed by Engineer-in-charge.
M& L for Providing precast cement concrete Type C1 (1:3:6) by using 20mm graded aggregate in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with ma?sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:6, complete with joints to match complete all as specified and directed by Engineer-in-charge.
Dismantling wrought iron or mild steel work of any description specifically provided for gates, staircase railings, framed truss etc complete all as specified and directed by Engineer-in-charge.
M&L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed by Engineer-in-charge.
Demolition of cement concrete (Un - reinforced) in ground floors and pavings n exc. 15cm thick.(Below or above ground level) complete all as specified and directed by Engineer-in-charge.
M&L for Cement concrete (1:4:8) type D2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-charge.
S&F Pre-painted galvalume aluminium zine coating GI based corrugated steel sheeting 0.50mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws including dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, all as specified & directed by Engr-in-charge. Note : (i) The fixing of Galvalume roof sheet as in sun-shades & in walls at certain places to be fixed by making of grooves cutting 75mm minimum with making good surface are inlcuded in the cost of item itself. No extra cost shall be paid for the same. (ii) The pattern and design of sunshades to be fixed complete all as specified and directed by Engineer-in-charge.
S&F 2mm thick water proof Green colour fibre sheet fixed with self tapping screws/J hook or as per site requirement in roof and sun shades as chajjas, with dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, all as specified & directed by Engr-in-charge. Note : (i) The fixing of these sheet as in sun-shades & in walls at certain places to be fixed by making of grooves cutting 75mm minimum with making good surface are inlcuded in the cost of item itself. No extra cost shall be paid for the same. (ii) The pattern and design of sunshades to be fixed complete all as specified and directed by Engineer-in-charge.
M&L for Preparation of new steel surfaces of any description over 10cm width or girth and application of two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed by Engineer-in-charge.
S&F 1000 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in position with 20mm bore dia ball brass valves high pressure, with polythene float and flynut screwed for iron pipe or brass ferrule, all as specified in SSR Part-I, complete including dismantling of existing tank with float valve complete all as specified and directed by Engineer-in-charge.
S&F 500 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in position with 20mm bore dia ball brass valves high pressure ,with polythene float and flynut screwed for iron pipe or brass ferrule, all as specified in SSR Part-I, complete including dismantling of existing tank with float valve complete all as specified and directed by Engineer-in-charge.
Taking down chowkats or frames exc 1.50 sqm but not exceeding 4.00 sqm each without taking off shutters from the frames including iron mongry complete all as specified and directed by Engineer-in-charge.
Taking down chowkats or frames n.exc 1.50 sqm each, without taking off shutters from the frames including iron mongry complete all as specified and directed by Engineer-in-charge.
S&F Pressed steel frames of size 165x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed by Engineer-in-charge.
S&F Solid PVC door frame of size 50x47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube suppling and fixing in opening as per specification and drawing complete all as specified and directed by Engineer-in-charge.
S&F 30mm thick of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, uppling & fixing in the frame at site as per specification & drawing etc complete all as specified and directed by Engineer-in-charge.
M&L for Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-charge.
S & F Anodised aluminium door shutters , aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, mortice lock 6 levers, anodised aluminum snap beading screws etc complete all as specified and directed by Engineer-in-charge.
S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engineer-in-charge.
S & F in repair, Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engr-in- charge.
S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed by Engineer-in-charge.
M & L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-charge.
S & F Plain, framed, panelled shutters 35 mm thick in second class hard wood (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engineer-in-charge.
S&F 35 mm thick Glazed and skeleton shutters second class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-charge.
S&F in repair, Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed by Engineer-in-charge.
S&F Mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and directed by Engineer-in-charge.
S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and directed by Engineer-in-charge.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engineer-in-charge.
S & F 3.00mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane, complete all as specified and directed by Engineer-in-charge.
S & F 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane, complete all as specified and directed by Engineer-in-charge.
S&F for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-charge.
M&L preparation on new wooden surfaces over 10 cm width/girth and applying 2 coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-charge.
S&F in repair, 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed by Engineer-in-charge.
S & F in repair, Single Piece-WC with PP soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size:360x640x685 mm, P Trap-180 mm, Code : SLS-WHT-6851P180PP of Jaquar or equivlent in Appx 'C' list of makes.
S&F in repair, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-charge.
S & F in repair, Oval shape slim/Thin Rim ceramic wash basin size (19x13 inch)/ Glossy finish/Counter top/ Tableto bathroom sink/Super white colour including fancy type pillar tap, complete all as specified and directed by Engineer-in-charge.
S & F in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed by Engineer-in-charge.
S& F in repair, Vitreous china bowl type urinal flat back, size of 465 x 355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern) including flush pipe and waste pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe, (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed by Engineer-in-charge.
S&F in repair, Urinal spreader chromium plated fixing with 15 mm dia pipe complete all as specified and directed by Engineer-in-charge.
S & F in repair, Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed by Engineer-in-charge.
S&F PVC connection pipe 15mm dia, 450mm long with PTMT check nuts and washer on both ends complete all as directed complete all as specified and directed by Engineer-in-charge.
S&F in repair, harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed by Engineer-in-charge.
S&F in repair 15mm dia Bib taps cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipe complete all as specified and directed by Engineer-in-charge.
S&F in repair 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as directed.
S&F 15mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc including taking down of old existing GI tubing complete all as specified and directed by Engineer-in-charge.
S&F 20mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc including taking down of old existing GI tubing, complete all as specified and directed by Engineer-in-charge.
S&F in repairs cast iron nahani trap with CP grating including jointing to waste pipe in cement mortar, diameter of out let 75mm bore fixed in cement concrete type B1 (1:2:4) complete all as specified and directed by Engineer-in-charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed by Engineer-in-charge.
M&L 5cm Sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete all as specified and directed by Engineer-in-charge.
M&L for Granite 20mm thick work table rubbed and polished in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-charge.
S & F in repair, Steel rolling shutters with thickness of laths 1.00mm , with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete, gear operated type with bevel gear box and crank handle complete all as specified and directed by Engineer-in-charge.
Narender Constrution Company
MARUDHARA CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .