REPAIR/MAINTENANCE OF INTERNAL ELECTRIFICATION, GEYSERS AND EXHAUST FANS AND ALLIED WORKS AT PEDONG, ALGARAH, DALAPCHAND, AP ALGARAH AND TEESTA TCP UNDER GE 867 EWS

Amount

M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping of size not lee than 25mm with all necessary fittings, fixed on walls/ceilings etc., including 1.5 Sq mm PVC insulated copper conductor FRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in PVC terminal boxes concealed type/surface type for housing switches, socket outlet, regulator etc., for one light /fan point controlled by one switch/one bell / buzzer point controlled by one bell push/one 3 / 5 -pin switch socket outlet 5 amps on independent board including taking down existing unserviceable point wiring terminal boxes and making good disturbed surfaces including testing on completion complete all as specified and directed by Engineer-in-Charge.

All as per item No. 1 above but for One 3/5 pin switch socket outlet 5 amps on same board along with other switches complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 2.5 Sqmm (nominal area) PVC insulated un - sheathed single core stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping of size not less than 25mm with all necessary fittings, fixed on walls/ceilings etc., including 2.5 Sqmm PVC insulated copper conductor FRLS cable for earth continuity conductor and connected to earth dolly and to be terminated in PVC terminal box concealed type/surface type for housing switches, socket outlet, regulator etc., for one 5 / 6 -pin switch socket outlet 15 amps on independent board including taking down existing unserviceable point wiring including terminal boxes and making good disturbed surfaces including testing on completion complete all as specified and directed by Engineer-in-Charge.

M&L for sub main wiring complete with 2 runs of 6 Sqmm PVC insulated heavy duty and unsheathed FRLS cable with multistranded copper conductor and drawing through and including rigid non metallic PVC casing and capping of size not less than 25mm fixed on wall/ceiling and connecting terminal ends including provision of 1 run of 6 Sqmm PVC insulated heavy duty and unsheathed FRLS cable with multistranded copper conductor as earth continuity conductor and connecting to earth dolly including taking down old unserviceable wiring and making good disturbed surfaces complete all as directed by Engr-in-charge. Note: 2 runs of 6 Sqmm and one run of 6 Sqmm and one run of casing capping shall be measured as one unit length.

M&L for sub main wiring complete with 2 runs of 4 Sqmm PVC insulated heavy duty and unsheathed FRLS cable with multistranded copper conductor and drawing through and including rigid non metallic PVC casing and capping of size not less than 25mm fixed on wall/ceiling and connecting terminal ends including provision of 1 run of 4 Sqmm PVC insulated heavy duty and unsheathed FRLS cable with multistranded copper conductor as earth continuity conductor and connecting to earth dolly including taking down old unserviceable wiring and making good disturbed surfaces complete all as directed by Engr-in-charge. Note: 2 runs of 4 Sqmm and one run of 4 Sqmm and one run of casing&capping shall be measured as one unit length. Make for Item No. 1 to 5 Cable: (i) Finolex, (ii) Plaza, (iii) Havells, (iv) Polycab, (v) KEI, (vi) Anchor Conduit: (i) Kinjal, (ii) Alwyn (iii) Harsh, (iv) Finolex (v) Berlia (vi) Plaza

S&F in repairs switch piano, flush button, single pole, 5 amps, one way complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs switch socket combination 2 – in – one 6 Pin , 5 / 15 amps flush type complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs ceiling rose 3 terminal /PVC/Polycarnonate, isolated body complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs lamp holder, PVC/polycorbonate insulated body with back plate for batten fittings complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 6 to 10: (i) Anchor (ii) Plaza, (iii) Havells (Crabtree) (iv) ABB (v) Shalabh

S&F sheet metal enclosure DB SPN 8 way 240 V with 200 Amp rated bus bar, powder coated double door including taking down old unserviceable DB complete all as specified and as directed by Engineer-in-Charge.

S&F sheet metal enclosure DB SPN 4 way 240 V with 200 Amp rated bus bar, powder coated, double door including taking down old unserviceable DB complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB SPN 40 Amps, 10 KA breaking capacity, 240 volts, 50 Hz including taking down old unserviceable MCB complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB SPN 32 Amps, 10 KA breaking capacity, 240 volts, 50 Hz including taking down old unserviceable MCB complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB SP 6 to 32 Amps, 10 KA breaking capacity, 240 volts, 50 Hz including taking down old unserviceable MCB complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 11 to 15: Legrand / Siemens/Schinder/L&T.

S & F in replacement Regal batten box type suitable for LED T-8 lamps , connector block, bipin holder,PVC square block etc. complete with all accessories internally pre wired including fixed with 02 Nos of PVC round/square block screws etc., and connecting up with PVC insulated 2 core, 0.5 sqmm copper conductor from connector to ceiling rose including taking down existing fitting and making good disturbed surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Crompton cat part No. IGP131LT8-16 or equivalent model of Philips/Wipro/Havells as approved by GE.

S & F in replacement energy efficent linerar LED tube light T8 tubular lamp with extruded aluminium body, PC diffuser and with inbuilt driver of 1 x 20 watt Ultra bright LED Tube light with very high efficacy suited for installation in box type batten including taking down existing tube light complete all as specified and as directed by Engineer-in-Charge. Make: Crompton cat part No.LTT8-20 or equivalent model of Philips/Wipro/Havells as approved by GE.

S&F LED modular energy efficient luminarie LED batten with polycarbonate housing and integrated electronic driver (Warm white 3000K) complete with electronic driver pre wired including taking down existing fitting complete all as specified and as directed by Engineer-in-Charge. Make: Havells cat part No LUMELINEBS18WLED830SPCWH or equivalent model of Philips/Wipro/Crompton as approved by GE.

S&F in replacement LED bulk head fitting, 10 watt, compact, ultra low energy, modern design utility bulkhead suitable for indoor and outdoor applications with IP 65 protection. complete and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 V, 50 HZ and mounting on PVC rectaangular board of 200mm x 250mm including dismantling unserviceable light fittings and making good disturbed surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Crompton ( Cat No LBH-10-CDL) or equivelent in Havells/Philips as approved by GE.

Supply and fixing in replacement of 36 watt LED edge lit luminare of 3000K suItable for armstrong/grid ceiling complete including electronic driver including taking down existing fitting and making good disturbed surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Havells cat part No.VENUSNEOHE2X2PLR18-42WLED830MOD for Panel, LEDDRIVER36V36WS for 36 Watt LED driver or equivalent model of CG/Philips as approved by GE.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI medium grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1:3:6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, 15 mm GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I including taking out existing earth plate etc., complete all as specified and as directed by Engineer-in-Charge. NOTE: Rate quoted shall be deemed to include for earth lead and protection pipe upto 7.5m.

Supply and fix in repair LED PL lamp 4P of 18 watts complete all as specified and as directed by Engineer-in-Charge. Make: Havells Cat Part No PHOTONULTRAPLL419TL18WLED865SPC Philips/Bajaj/Crompton

Supply and fix in repairs 1.5 KW capacity Heating Element, triangular type with ‘necessary washer including making electrical connection complete all as directed by Engineer-in-Charge.

Supply and fix in repairs 2.0 KW capacity Heating Element, triangular type with ‘necessary washer including making electrical connection complete all as directed by Engineer-in-Charge. Make for Item No. 23&24: Bajaj/Venus/Racold/Havells/Crompton/Power pack/Jilco or equivalent as approved by GE.

Supply & Fix in repairs Thermostat switch overheat cut off type for geysers 25/ 50 Ltr capacities including making connection complete all as directed by Engineer-in-Charge.

Supply and fixing PVC connection heavy duty with brass /PTMT nuts of reqd |ength not exceeding 300 mm with rubber/ PVC washer suitable for 15 mm bore GI pipe for cold water complete all as specified & directed by Engineer-in-Charge. Make:- PRAYAG/POLYTUFF or equivalent as approved by GE.

Supply & fixing in replacement 300mm long chromium plated copper pipe connection (Heavy Duty) with two numbers brass adopters for fixing one end at geyser & other end at water outlet point for hot water complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement indicator lamp round /rectangular and making electric connections (Red/Green) 220 Volts AC as per site requirement suitable for geysers complete all as directed by Engineer-in-Charge.

S&F Air termination single pointed aluminium rod 12mm dia 300mm long including removing unserviceable termination rod complete all as directed by Engineer-in-Charge.

S&F aluminium strip 25 x 3.15 mm thick saddle/mounted on porcelain/wooden insulator etc. for roof conductors and down conductors above ground including removing unserviceable conductor complete all as directed by Engineer-in-Charge.

S & F in repairs wooden seperator of 2nd class hard wood of size 150mmx100m x50mm fixed with two nos bolts nuts and washers of required size complete all as directed by Engineer-in-Charge.

Sub Total of Schedule 'A'

Schedule of Credit (Minus) Rs. 23,468.00 B/F from Ser page No. 26 NOTE: Bidder shall insert credit amount as rate Rs. 23,468.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender.

Sub Total of Schedule of Credit

MOURICE CONSTRUCTION COMPANY

S K ENTERPRISES

SANJAY SAW MILL

M/S G. K. SUTHAR

GARGO TRADERS

JAYSHREE CONCERN

GEETA CONSTRUCTION

MS MAYA PRAKASH GOEL AND SONS