Loading…
Loading…
Tender Value
Refer Docs
Closing Date
23 Jul 2026, 11:30 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
90 days
Expenditure
General
50
2 conditions
The purchaser reserves the right to place order for entire /bulk qty. (minimum 80% of the Net Procurable Quantity) on firms which have satisfactorily executed at least one single purchase order of any Zonal Rly/PU/CORE for the tendered item for a minimum of 20 percent of the tendered quantity within a span of last 03 years from the date of closing of this tender, in terms of Clause 3.4 of the Section II of 'CENTRAL RAILWAY BID DOCUMENT. Requisite documents in support of the above must be uploaded by the firms along with offer in terms of Clause 3.4.2 of the Section II of 'CENTRAL RAILWAY BID DOCUMENT (Updated latest).
In terms of Railway Boards letter No. 2015/RS(G)/779/5(Vol.III) Dated: 22.06.2020 and in keeping with the Public Procurement (Preference to Make in India) Order 2017, latest revision, it has been found that there exists sufficient local capacity and competition in supply of the tendered item of required quality and therefore public procurement of the item is restricted to " Class I local suppliers " only and the vendors who do not qualify to be Class I local suppliers should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class I local supplier for the tendered item participates in the tender it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor.
80 conditions
Have you furnished the statement of deviations [preferably nil] ?
Have you quoted in the prescribed performa ?
Have you attached CA certificate for the Local Content claimed, if you claim to be a "Class I Local Supplier" ?
Have you submitted Earnest Money Deposit (EMD) ?
It shall be the responsibility of the tenderers to quote correct HSN number and corresponding GST rate. Have you checked HSN code and have quoted corresponding GST rate ?
Have you submitted authenticated copy of the document authorizing the signatory to submit offer and commit on behalf of tenderers ?
Have you quoted price on the basis of free delivery to destination, indicating the break up ?
Have you kept your offer validity as per " Condition for Responsiveness of Offer " ?
Have you read and accepted tender conditions ?
Have you mentioned Make/Brand of OEM ?
Have you attached any performance statements separately ?
Have you furnished all the mandatory Bank details ?
Have you quoted the discount if any in the specified column only in IREPS ?
Have you attached relevant document for MSE if you claimed benefits and referential treatment as MSE firm ?
Have you indicated the percentage of Local Content in the relevant column ?
Have you submitted the details of location(s) where local value addition is made ?
Have you carefully reviewed the contents of the Undertaking/Declaration regarding non-participation of sister concerns or affiliates in this tender as submission of false information/declaration could lead to rejection of the bid ?
Bidders must agree to furnish SECURITY DEPOSIT as applicable as per Clause 24.0 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated Latest). Bidders (except approved vendors for tendered item/items) claiming exemption from paying SD must upload requisite document towards such claim, alongwith the offer. Offers from firms denying to pay Security Deposit will be summarily rejected.
Goods & Services Tax (GST): As per Clause 9.0 and all sub-clauses of CENTRAL RAILWAY BID DOCUMENT (Updated Latest). All tenderers to quote correct HSN code and corresponding GST rate for the item/ items quoted. Misclassification in HSN code, if quoted by any bidder, shall be dealt as per Clause 9.0(iv) of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated Latest)
Bidders shall also give Declaration as below:- "I/We agree to pass on such additional input tax credit as may become available in future under GST scheme, in respect of all the inputs used in the manufacturing and/or supply of final goods/services on the date of supply by way of reduction in price and advise the purchaser accordingly".
The Bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the Standard Governing Conditions of this tender.
The bidder confirms that Rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for Acceptance, and such terms quoted anywhere else should be ignored. [Denial of this condition is not recommended].
An Indian Agent quoting in INR on behalf of a foreign Principal/OEM should submit a copy of Invoice/Proforma Invoice from OEM along with their offer as well as should undertake to furnish all import documents and should comply to Clause 22.0 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated Latest).
Bidders are advised to carefully review the contents of the undertaking/declaration prior to signing, as the submission of false information could lead to rejection of the bid.
Earnest Money Deposit (EMD) shall be as per Clause 23.0 of Section II of CENTRAL RAILWAY BID DOCUMENT(Updated Latest). EMD is compulsory and offers without EMD, except those exempted, will be summarily rejected. Vendors (other than those appearing on Vendor Panels of Approving Agencies) seeking exemption from EMD, shall have to attach scanned copy of requisite document alongwith offer in support of their claim for exemption, failing which their offer may not be considered eligible for exemption from EMD. An Authorised Agent quoting on behalf of a manufacturer shall not be exempted from remitting EMD owing to any of the exemption claimed. Bidders claiming exemption shall also be required to sign the bid securing declaration as follows:- I/We certify that, my/ our offer is eligible for exemption from submission of bid security/ Earnest Money Deposit, in terms of the tender conditions. In case my/our claim to exemption from submission of bid security/Earnest Money Deposit is not found valid as per terms of the tender, I/we understand and accept that Railways has unquestionable right to summarily reject my bid and my offer shall not be considered for ordering. Further, I/we hereby understand and accept that if I/we withdraw or modify my/our bids during the period of validity, or if I/we are awarded the contract and on being called upon to submit the performance security/Security Deposit, fail to submit the performance security/Security Deposit before the deadline defined in the request for bid document/Notice Inviting Tender, I/we shall be debarred from exemption of submitting Bid Security/Earnest Money Deposit and performance security/Security Deposit for a period of 6 (six) months, from the date I/we are declared suspended disqualified from exemption from submission of EMD/SD, for all tenders for procurement of goods issued by any unit of Indian Railways published during this period.
In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, the Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism [RCM] and deposit the same to the concerned tax authority.
Participation by Manufacturers is preferred. Agents/Dealers participating in tender on behalf of manufacturers must provide tender specific authorization (TSA) letter issued by the OEM. Bidders must upload above authorization letter with their offer failing which their offer will be summarily rejected. i) In a tender, either the authorized agent/dealer on behalf of the Principal/OEM or the Principal/OEM itself can bid, but both cannot bid simultaneously for the same item in the same tender. Further, against a particular tender, one Principal/OEM should not issue Tender Specific Authorization to more than one agent/dealer. Such offers are to be summarily rejected. ii) If an authorized agent/dealer submits bid on behalf of the Principal/OEM, the same agent/dealer hall not submit a bid on behalf of another Principal/OEM in same tender for the same item/product and such bids will be summarily rejected. iii) Trader/Authorized Dealer should mention name of Manufacturer, make and complete address in their bid for inspection of material at OEM works.
Bidders to submit details of location(s) where local value addition is made. In case no details are furnished, it will be presumed that works address(es) of manufacturing in India are the location(s) of local value addition.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
LAND BOARDER: All bidders shall confirm declaration as below in terms of Clause 5.15 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated Latest) in compliance of restrictions under Rule 144(xi) of GFR- 2017:- a) I have read the clause regarding restrictions on procurement from a bidder of country which shares a land border with India. b) I certify that this bidder is not from such a country or, if from such a country, has- been registered with the competent authority. c) I hereby certify that this bidder fulfils all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the competent authority is attached). If the bidder fails to give such declaration, as above, then it will be presumed that the contents of above declaration have been read and unconditionally agreed and accepted by the tenderer. If any tenderer is not agreeable to this declaration they have to categorically mention about the disagreement in Techno- Commercial Deviation.
In case of an upward change in terms of investment in plant and machinery or equipment or turnover or both, and consequent re-classification, an enterprise shall continue to avail of all nontax benefits of the category (micro or small or medium) it was in before the re- classification, for a period of three years from the date of such upward change.
The tenderers in their bids shall indicate the details of their Jurisdictional Assessing Officers (Designation, Address, Email ID). In case of a contract award, a copy of the LOA/Purchase order shall be immediately forwarded by the Purchaser to the Jurisdictional Assessing Officer mentioned in the tendered bid.
Authorizes agent quoting on behalf of a manufacturer shall not be exempted from remitting EMD,owing to any of the above exemptions as stipulated at Para 23.1(a) to (i) of Clause 23.0 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated Latest)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 condition
Validity of offer: Validity of offer should be strictly as per Clause 1.8.5 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated Latest) (or) as stipulated in the tender document, whichever is longer. Offers quoted with lesser validity shall be treated as commercially unresponsive and shall be summarily rejected
1 location across Maharashtra · 273 Numbers total
Angle base frame for Post box
50255222C~CR
50255222C
Open - Indigenous
Goods
Maharashtra
₹0
Exempted
23 Jul 2026
13 Jul 2026
1 item · 273 Numbers total
Angle base frame for Post box size S.S.Location Box as per Drg no :- WPLB-01 or WPLB-01A, sample to be got approved before bulk supply . Party should submit test certificate from NABL lab for mate rial. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CWM(S&T) WS BYCULLA, CR | Maharashtra | 273.00 Numbers |
| Total | 273 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5332089.pdf
ATTACHMENT
5330493.pdf
ATTACHMENT
5329623.pdf
ATTACHMENT
5454651.pdf
ATTACHMENT
5420895.pdf
ATTACHMENT
5454645.pdf
ATTACHMENT
5352105.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .