Planned Maintenance work of OFC of Bharatnet Phase-I in the Zones/BA for 4G saturation sites restoration

PRICE BID FORMAT: ZONE 1 BASTAR

S,No. Work/ Item Description Unit Unit cost (IN R) (exc lusi ve of GST) Qu a nt it y Tot al cost (IN R) (exc lusi ve of GST *R ate of CG ST *R ate of SG ST *R ate of IG ST Tot al GS T (INR) Total cost (inclusive of GST) (in INR) H S N Code

A B C=A*B D E F G=C*[(D+E) or F] H=C+G

1 Trenching and Laying (T&L):Replacement of damaged OFC and/orProject Work and/or Repair of One timeOFC faults by Excavation of trench for PLB pipe laying, PLB pipe laying,Backfilling, Reinstatement and Compaction after laying of PLB pipe,Splicing and Jointing of Optical Fibre Cable, Supply of As Built Diagram (ABD)of constructed OFC Route with GIS Mapping and Acceptance Testing,commissioning. The work also includesroad / bridge crossing, supply of DWC Pipe/ G. I. Pipe and laying of PLB insideDWC Pipe/ G.I. Pipe, wherever required,obtaining Right-of-Way (RoW)permissions, Supply & Installation of straight splice closures; Supply, fixing,painting & sign writing of Route /Join tIndicators; supply and installation of allthe relevant accessories etc.; end to endtesting of dark and lit fibre for required optical power at ONT and making overthe routes to FMA (As per the Engineering Instruction). Per RKM 28.5 X1

2 Supply of 24F metal free optical fibrecable with double HDPE sheath (G.652DFibre) loose tube type along withrequired accessories as per TEC GRand blowing/ pulling the same.(Annexure-A) PerKm 30 X2

3 Supply and installation of PLB HDPE Telecom Duct (40/33mm) along with required accessories as per TEC GR (Annexure-A) Per Km 29 X3

4 Supply and installation of Joint Chamber as per E.I. Per No 4000 15 60000 10800 X4 70800

5 Digging Pit, Supply, installation of Joint Closure with Splicing as per TEC GR/ E.I. Per No 3500 15 52500 9450 X5 61950

6 Supply of 24F FTB/FDMS as per TEC GR and termination of all the fibres Per No 3000 4 12000 2160 X6 14160

7 Supply, installation and splicing/ jointing 1:4 Splitter as per TEC GR Per No 751 4 3004 541 X7 3545

Total Cost (X1+X2+X3+X4+X5+X6+X7) Rs

Total Cost (in words)

Note: The quantities mentioned in SOR and Price Bid Format are only indicative. The actual quantities may vary substantially as per the field survey and requirement. Firm Work Orders shall be issued based on Survey and as per actual requirements. The Successful bidder shall also be bound to provide supply and services for items at Sl Nos 4,5,6 & 7 at the pre-defined rates as mentioned against each item. The quantities shall be as per the site requirement. The bidder is supposed to absorb the gain/loss on account of the predefined rates in the quoted price of items at Sl Nos 1,2 &3.

PRICE BID FORMAT ZONE 2 - BILASPUR

S,No. Work/ Item Description Unit Unit cost (IN R) (exc lusi ve of GST) Qu a nt it y Tot al cost (IN R) (exc lusi ve of GST *R ate of CG ST *R ate of SG ST *R ate of IG ST Tot al GS T (INR) Total cost (inclusive of GST) (in INR) H S N Code

A B C=A*B D E F G=C*[(D+E) or F] H=C+G

1 Trenching and Laying (T&L): Replacement of damaged OFC and/or Project Work and/or Repair of One time OFC faults by Excavation of trench for PLB pipe laying, PLB pipe laying, Backfilling, Reinstatement and Compaction after laying of PLB pipe, Splicing and Jointing of Optical Fibre Cable, Supply of As Built Diagram (ABD) of constructed OFC Route with GIS Mapping and Acceptance Testing, commissioning. The work also includes road / bridge crossing, supply of DWC Pipe/G. I. Pipe and laying ofPLB inside DWC Pipe/G.I. Pipe, wherever required, obtaining Right-of-Way (RoW) permissions, Supply & Installation of straight splice closures; Supply, fixing, painting & sign writing ofRoute /Joint Indicators; supply and installation of all the relevant accessories etc.; end to end testing of dark and lit fibre for required optical power at ONTand making over theroutes to FMA (As per the Engineering Instruction). Per RK M 115.5 X 1

2 Supply of 24F metal free optical fibre cable with double HDPE sheath (G.652D Fibre) loose tube type along with required accessories as per TEC GR and blowing/ pulling the same. (Annexure-A) Per Km 121 X 2

3 Supply and installation of PLB HDPE Telecom Duct (40/33mm) along with required accessories as per TEC GR (Annexure-A) Per Km 118 X 3

4 Supply and installation of Joint Chamber as per E.I. Per No 4000 58 232000 41760 X 4 273760

5 Digging Pit, Supply, installation of Joint Closure with Splicing as per TEC GR/ E.I. Per No 3500 58 203000 36540 X 5 239540

6 Supply of 24F FTB/FDMS as per TEC GR and termination of all the fibres Per No 3000 11 33000 5940 X 6 38940

7 Supply, installation and splicing/ jointing 1:4 Splitter as per TEC GR Per No 751 11 8261 1487 X 7 9748

Total Cost (X1+X2+X3+X4+X5+X 6+X7) Rs

Total Cost (in words)

Note: The quantities mentioned in SOR and Price Bid Format are only indicative. The actual quantities may vary substantially as per the field survey and requirement. Firm Work Orders shall be issued based on Survey and as per actual requirements. The Successful bidder shall also be bound to provide supply and services for items at Sl Nos 4,5,6 & 7 at the pre-defined rates as mentioned against each item. The quantities shall be as per the site requirement. The bidder is supposed to absorb the gain/loss on account of the predefined rates in the quoted price of items at Sl Nos 1,2 &3.