WBPWD/EE/KPG/eNIT35/25-26

Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc. and stacking the material at site as directed.

Stripping off worn out plaster and raking out jointsofwalls,celings etc.upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) Sal : Siliguri.

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.Sclamps. Sal : Siliguri

Glazed shutters of doors, windows, fan light, clerestory windows etc. as per design (with ordinary glass of 7.4kg./sq.m. 3mm. Thick) fitted with putty bed and teak wood bead and nails including fitting and fixing shutter in position but excluding the cost of hinges and other fittings. cost of glass, putty, wooded beads etc.will be paid separately. 35mm thick shutters. Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak

Supplying, fitting and fixing M.S.clamps for door and window frame made of flat bent bar,end bifurcated with necessary screws etc. by cement concrete (1:2:4) including cutting of brick work/concrete work as per direction. 40mm X 6mm, 250mm Length

Iron socket bolt of approved quality fitted and fixed complete. 150mm long x 10mm dia bolt.

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: continous plated base 100 mm grip x 10 mm dia rod.

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. 100 mm x 50 mm x 1.25 mm

Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. 300 mm long

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) 3 mm thick (weighing 7.4 kg/Sq.m)

Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip coarse, scaffolding / staging where necessary. With 1:4 cement mortar 15 mm thick plaster

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. One Coat

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specificationand as per direction of the EIC. One Coat Water based interior grade Acrylic Primer

Acrylic Distemper to interior wall,ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats Water based interior grade Acrylic Primer Ground Foor

Supplying, fitting & fixing Zn-Al alloy (55%Al&45%Zn) coating of 150 grams per sq. metre (followed by colour coatedonbothside) steel sheet work having minimum yield strengthof 550Mpa of trapizoidal profile of approved make (excludingthesupportingframework) fitted and fixed with 55mm & 25mm self tapping screw,EPDM Washer 16mm dia & 3mm th. washer etc. complete with 150mm end lap and one corrugation minimum side lap.(Payment tobemade on area of finished work). In Roof With 0.5 mm thick sheet

Galvanised iron sheets valley gutter with perimeter not less than 750mm with 225 mm lap each way fitted and fixed with necessary bolts, nuts, screws, etc. complete. Valley gutter made of 0.63 mm. thick sheets. (300mm End lapping)

Galvanised iron sheet eaves gutter fitted and fixed with necessary 50mmX6mm M.S flat bar clamps bent to design, bolts, nuts, washers etc. complete. Eaves gutter made of 0.63 mm. sheets.(300mm End lapping) 300 mm. wide gutter

Galvanised iron sheet ridging fittedwith necessary bolts, screws, washers etc complete.(225mm end lapping) 300 mm lapping each way With 0.63 mm sheet

Ceiling with 12mm thick wooden planks fitted and fixed complete (excluding the supporting framework) as per direction of the Engineer-in-charge. Sishu / Champ / Badam / Gamar / Bhola / Mogra / Hallak

Supplying, fitting and fixing boiling water resistant ply conforming to IS:303-1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-inCharge.[excluding the cost of supporting frame work and teak wood batten/Lipping] 19mm Th.

Supplying fitting, fixing decorative lamination conforming to IS:2046:1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF/PlyBoards withre commended/approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges there of. Thickness of laminate 1.5mm

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Two Coat Premium 100% Acrylic Emulsion

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On timber or plastered surface With super gloss (hi-gloss) Two coats (with any shade except white)

On steel or other metal surface With super gloss (hi-gloss) Two coats (With any shade except White)

Supplying, fitting & fixing UPVC pipes A-Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/ Bitumen/ M-Seal etc) complete. UPVC Pipes 75 mm. Dia.

UPVC Fittings Bend 87.50 degree 75 mm. Dia.

Sanitary Items: Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. With 'P' trap

Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 900 mm long

Supplying, fitting and fixing pillar cock of approved make. CP Pillar Cock Super Deluxe with Aerator- 15 mm. (Equivalent to Code No. 508 & Model No. Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting and fixing porcelain soap tray of approved make. Recessed soap tray of size 150 mm X 150 mm

Labour Welfare Cess @ 1%

Please Enable Macros to View BoQ information