Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 01₹6.5 LAccepted-Finance | 01 | Accepted-Finance lower | |
| 2 | 02₹7.3 L+₹75,264.25 (11.6%)Accepted-Finance | 02 | Accepted-Finance higher | |
| 3 | 03₹7.6 L+₹1.1 L (17.3%)Accepted-Finance | 03 | Accepted-Finance higher |
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
21 Jan 2020, 9:00 amClosed
Brid DC Joshi
Headquarter AMC Centre and College, Luc
Addition/Alteration of No 5 URC under AMC Centre and College lucknow
2019_ARMY_310729_1
908102/CSDQD/2019-20
Open Tender
Miscellaneous Works
Turn-key
30 days
NO 5 Unit Run Canteen, AMC Centre and College, Luc
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹10,000
Yes
24 Jan 2020
31 Dec 2019
21 Jan 2020
31 Dec 2019
21 Jan 2020
15 Jan 2020
31 Dec 2019 - 15 Jan 2020
Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed (as per tech QR of RFP)
Material & Labour charges 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and as directed (as per tech QR of RFP)
Material & Labour charges for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in floor etc. complete all as specified (as per tech QR of RFP)
Dismantling floor, hearth wall / floor tiling etc including cement mortar bedding (but not backing)/ cement plaster including rubbish off the premises complete all as specified and directed (as per tech QR of RFP)
Material & Labour charges for 18-20 mm thick machine cut kota stone slab flooring over 20 mm thick screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed (as per tech QR of RFP)
Material & Labour charges for 18-20 mm thick machine cut kota stone as in skirting/riser etc. with 15 mm thick rendering in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. (as per tech QR of RFP)
Cutting openings through walls(Old msonary walls built in cement mortar) for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing, fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises complete all as specified and directed. (as per tech QR of RFP)
Material & Labour charges for RCC 1:1½ :3 type A1(using 20 mm graded stone aggregate) as in plinth beams etc.complete all as specified and directed (as per tech QR of RFP)
Material & Labour charges for TMT bars 10 mm dia and over for reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-415 or Fe-500 complete all as specified and directed. (as per tech QR of RFP)
Ditto as per item 09 above but 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders etc (as per tech QR of RFP)
Material & Labour charges for formwork to sides of concrete in plinth beams, and similar work complete all as specified and directed. (as per tech QR of RFP)
Material & Labour charges for Brickwork with old size subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. (as per tech QR of RFP)
Material & Labour charges for rendering 15mm thick on fair faces of brick work in CM1:6,finished even and smooth without using extra cement complete all as specified and directed. (as per tech QR of RFP)
Material & Labour charges for rendering 15mm thick on other than fair faces of brick work in CM1:6,finished even and smooth without using extra cement complete all as specified and directed. (as per tech QR of RFP)
Material & Labour charges for applying two coats of oil bound distemper over a coat of primer over Birla white wall putty after complete removal of existing treatment on old plastered surface including necessary preparation complete all as specified and directed. (as per tech QR of RFP)
Material & Labour charges ACP wall cladding 4 mm thick fixing with aluminumun beadings and necessary arrangement and colour will be approved by Engr in Charge. (as per tech QR of RFP)
Dismantling of Fibre glass translucent sheet (corrugated or semi corrugated etc) in roof covering including ridge complete all as specified and directed. (as per tech QR of RFP)
S&F Pre - painted galvalume aluminum zink coating GI based corrugated steel sheeting 0.50 mm thick of an color having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as specified. (as per tech QR of RFP)
S&F aluminium anodized door with frame of size 100x44.5x1.5mm, stile, middle and top rails of size 82x44.5x1.5mm thick and bottom rail of size 114x44.5x1.5mm thick including 5.5mm thick tinted glass panes with all fittings/fixtures such as cleats, tower bolt, hinges, locking arrangement, pull and push handle of aluminium anodized, hydraulic door closer etc., complete including aluminium and rubber beading all as specified and directed. (as per tech QR of RFP)
Shakti Traders
M/S BHAVIA IRON AND COMPANY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .