Providing CAD work to LIS Handa Kundi in Tehsil Nalagarh District Solan HP SH Laying jointing and testing of HDPE pipes in Distribution system and Construction of Brick Masonry MDT and construction of out lets

Amount

Excavation in foundation trenches upto all depths in all classification of earth work such as pick work,jumper work, saturated soil including bailing of pumping out water,blasting soft/hard rock where blasting is prohibited.In all lifts including trimming and dressing of sides,levelling of beds to correct grade i/c shoring,strutting,planking timbering and dewatering wherever required,stacking the usable and un-useable material / soil separately and after laying, jointing of pipes returning the useable soil in trenches in trenches in 15 cm (fifteen centimeters) layers including consolidating of each of each deposited layer by ramming and watering and disposing of all surplus excavated soil un useable materials as directed within all leads & lifts including restoration of un-metalled surfaces to its original condition and including cost of diverson for traffic night signals, fixing caution boards, crossing over trenches for excess to houses, fencing etc.complete in all respect with in all leads & lifts as per the direction of the Engineer-in-charge.

Providing and laying cement concrete 1:4:8(Icement:4sand:8 graded stone aggregate 40mm nominal size)and curing complete excluding the cost of form work and cement in foundation and plinth including carriage of material in all leads & lifts.

2nd class brick work using common burnt clay building bricks in foundation and Plinth in cement mortor 1:4 ( 1 cement:4 sand ).in all leads and lifts as per the direction of the Engineer-in-Charge.

15 mm cement plaster in single coat on rough side of brick masonry for interior plastering upto floor two level including arrises, internal rounded angle, chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with cement mortor 1:3 ( 1 cement : 3 sand ) in all leads and lifts as per the direction of the Enginner-in-Charge.

40mm thick cement concrete flooring 1:2:4(1 cement:2sand:4graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of materials with in all leads and lifts.

Laying, jointing, testing and commissioning of heigh density polythene pipe for use for buried water main and services and for water supply above ground , both inside and out side building duly ISI marked ( IS-4984-1995) as amended upto date of PE 80 of pressure 4.0 &6.0 of the following diameter (Earth work work to be measured ans paid for separately) complete in all respect, including entire carriage of materials upto all leads and lifts and as per direction of Engineer-in-Charge.

160 mm dia HDPE pipe PN.4.0 PE 80 IS:4984

180 mm dia HDPE pipe PN.4.0 PE 80 IS:4984

Providing and fixing Cast iron Alfa valve 200 mm dia of approved make including entire carriage of material upto all leads and lifts and as per the direction of Engineer-in-Charge.

Vijay Kumar

NARAYAN SINGH

Naveen singh Govt Contractor