SPECIAL REPAIRS TO HARDSTANDING AT DUPLEX HOUSES AND WH AREA AT DSSC WELLINGTON

Amount

Demolition to cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removing rubbish outside MD land complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonary built in cement mortar complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil etc complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out as in any type of soil for foundation etc complete all as directed by the Engr-in-Charge.

M&L for Hard core, broken stone of boulders of gauge n exc 63 mm all as directed by the Engr In charge.

M& L for 75mm thick PCC type C-2(1:3:6) using 40mm graded stone aggregate as in pavings,hard standing etc including finishthe surface even and rough to receive the top finish complete all as diercted by the Engr In charge.

M&L for Sand filling M Sand under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, rubber moulded (Laquer coated finish) M-35 Grade with approved colour complete all as specifed and as directetd.Make : M/S Nilgiri/ M/s Mehtab

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete.dust, etc washing down with water to remove dust, etc all as specified and as directed.

M&L for chequered cement concrete tiles of size 30cmx30cmx 25mm thick ,set ,jointed and pointed in neat cement slurry in floors with grey cement and pigments of required colour over 20mm thick thick screed bed in CM (1:6) complete as specified and as directed.

M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggragate steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as directed

M&L for Cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in foundations,filling and mass concrete all as specified and as directed.

M& L for for PCC type C-2(1:3:6) using 40mm graded stone aggregate as in surface channels and drains including necessary form work complete all as diercted by the Engr In charge.

Material and labour for Rendering 10mm thick in Cemnet mortar (1:4) on fair faces of brick work or concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour for precast concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces etc set in CM(1:6) all as diirected by the Engr In charge.

M&L TMT bars 10 mm dia & over cut to length bent to shape required, including cracking, bending spirally to proper for columns, hooking end & binding with and inch mild steel wire not less than 0.9mm dia or securing with clips quality conforming to TMT bars complete all as spfd and directed

M&L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups cut to length, bent to shape required incl cranking bending spirally for hooping for columns, hooking ends,spacers etc and binding with and incl mild steel wire(annealed) not less than 0.9mm dia quality conforming to TMT bars complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all spd and directed.

Material and labour for two coats synthetic enamal paint on steel surface over one coat of red oxide primer including prepareation of new or old surface complete

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete as in hard /dense soil all as spd and directed.

Removing excavated material exceeding 1.5 KM and not exc. 5KM and depositing where directed at a level n exc. 1.5 m above the starting point all as directed by Engr In Charge.

Sree Constructions

sree devi construction

ACE PROMOTERS

P K ENTERPRISES