REPAIRS TO PLUMBING WORKS, FLOORING, TILING, SANITARY FITTING, JOINERY, ROOFING, FALSE CEILING AND MISC WORKS AT UNIT 729 AND 289 OF AGE B/R (SOUTH) NO II UNDER GE (SOUTH) SECUNDERABAD

Amount

M & L for 15 mm thick rendering in Cement Mortar 1:4 on fair faces of Brick works or Concrete surfaces and finishing even and fair without using extra cement. complete all as specified and as directed. incl scaffolding if necessary. Note : Patch work upto height 7.50m incl necessary scaffolding.

M/L for rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even and faircomplete all as specified and as directed.

M & L for 10 mm thick rendering in Cement Mortar 1:3 on fair faces of Brick works or Concrete surfaces in ceilings and finishing even and fair without using extra cement. complete all as specified and as directed. . Note : Roof projection/sun shade portion upto ht 7.50m incl necessary scaffolding

M & L Preparation of newly plastered surfaces of wall and applying two coat of Distemper over a coat of primer complete all as specified and as directed.

M&L for applying three coats of white wash on ceiling over primer including preparation of new plastered ceiling surfaces complete all as specified and as directed. and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premisescomplete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished fair & even as in Sub base flooringcomplete all as specified and as directed.

M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick plaster on wall in cement mortar 1:4complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm screed bed in cement mortar 1:6complete all as specified and as directed.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6. complete all as specified and as directed

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl renderering 10mm thick for laying floor finishes in CM 1:4.mm complete all as specified and as directed

Demolition of stone slabs of any description or thickness in floors, aprons, etc laid, bedded and pointed in any mortar complete all as specified and as directed

Demolition of Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and pigments of size 300cmx300cmx20-25mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick CM 1:6 screed bed in flooringcomplete all as specified and as directed.

M & L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade over 50 mm thick compacted sand cushion Complete all as directed by Engineer-in-charge Make :- Ultra or Classic.

S&F 15mm bore Bib taps, castcopper alloy withcrutch or butterfly handle, screweddown, screwed foriron pipe or for brass ferrule and fixedin repairs complete all as specified and as directed.

S&F in repair 15mm dia pillar tap cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe complete all as specified and as directed.

S&F MS rolled section angle/square conduit/flat iron of any size as in purlins, Column, rafter,Water tank stagingswindtie connected to common rafters fixed with angle cleats with necessary bolts & nuts and other connecting materials required to connect complete all as specified and as directed

Excavation in post holes or (similar holes) each n exc 0.50 Cum in soft/loose soil, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed.

M&L PCC 1:4:8, type D2 using 40mm gd stone aggs as posts (including caps and bases) complete all as specified and as directed.

S&Fin repair WHB vitreous china (flat back or angle back type ) any size ,including cutting for pinning in ends size 550x400 mm including brackets ,out let pipe ,coupling ,connection pipe and CP pillar tap complete all as specified and as directed

S&F in repairs Bib taps 15mm standard of PTMT and any colour screwed for iron pipe and fixed complete all as specified and as directed

S & F in repair Vitreous china Squatting pan Orissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete all as specified and as directed.

S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete all as specified and as directed

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

S&F in repairs stop cock 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms) complete all as specified and as directed

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and as directed.

S & F in repairs health faucet with spray jet (hand shower) cromium plated incl all fitting & fixtures complete all as specified and as directed.

S&F in repair two way bib cock/tap 15 mm chromium plated complete fancy type of branded complete all as specified and as directed.

S&F in repairs PVC cabinet with door fitted with looking mirror size 422mm x 622mm(Make: Prayag) all as directed by Engr-in-charge.

S & F in repair Towel bar cromium plated incl all fitting & fixtures complete all as specified and as directed. (Make : Hindware Cat no : F450024)

S & F in repair Urinal Complete set incl all fitting & fixtures complete all as specified and as directed. (Make : Hindware Cat no : 96008)

S & F in repair Wall Mixture cromium plated incl all fitting & fixtures complete all as specified and as directed. (Make : Hindware Cat no : F320011)

S & F in repair Towel ring icromium platedncl all fitting & fixtures complete all as specified and as directed. (Make : Hindware Cat no : F890004)

S & F in repair Paper Holder with cover cromium plated incl all fitting & fixtures complete all as specified and as directed. (Make : Hindware Cat no : F840009)

S & F in repair Single lever Basin Mixer w/o Popup Waste cromium plated incl all fitting & fixtures complete all as specified and as directed. (Make : Hindware Cat no : F400009)

S & F in repair Bip cock with wall flange cromium platedincl all fitting & fixtures complete all as specified and as directed. (Make : Hindware Cat no : F400002)

Demolition of cement concrete in roof inc existing roof treatement (other than ground floor) and removing debris to a distance of n.exc 100M away from the bldg complete all as specified and as directed.

M & L for 25 mm average thick PCC (1:2:4) Type B0 by using 12.50 mm graded stone aggregate as in roof where required over slabs and finishing the exposed surfaces fair even without using extra cement complete all as specified and as directed. .

M&L for removal of old treatment of any description and removing the debris roughening the surfaces of old concrete roof surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed. .

M & L 10mm thick rendering in CM 1:4 using water proofing compound at the rate of 3% weight of cement over concrete surfaces complete all as specified and as directed. . ( Note : WPC measured and paid separately)

M&L priming the plastered roof surfaces with bitumenous primer @ 0.30 Kg per sqm and applying APP based polymeric membrane minimum weighing 3 Kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/per Sqm) and on primed surface by forced application over apply bitumen base aluminium paint @ 0.20 Kg/Sqm complete all as specified and as directed..

Supply only water proofing compound complete all as specified and as directed

M & L cutting grooves in brick wall/roof slab of size 75mm wide 65mm deep and shapping to horizontal face of the groove with cement mortar 1:3 complete all as specified and as directed. .

S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls including taking down rain water pipes complete all as specified and as directed.

Dismanting asbests cement ( corrugated, semi-currugated etc.) sheets in roof covering complete all as specified and as directed. .

S & F, 6mm thick, asbestos cement, corrugated or semi-corrugated sheets in roofs, etc. fixed with L Hook or cranked bolts. complete all as specified and as directed.

M & L Asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L hooks complete all as specified and as directed. .

S & F prepainted galvalume aluminium zink coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed

S&F pre painted gal valume aluminium zink coating GI based plain steel sheeting 0.5mm thick of any colour haing tensile strenghth of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not other wise provided for. complete all as specified and as directed. .

Fixing only rolled section as in ain and cross beams, hip and jack rafters purlins, where connected to common rafters and running rails complete all as specified and as directed.

S & F roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A. complete all as specified and as directed

M & L providing cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in copings, roof curves or muds, stops, rounded or chamfered on edges complete all as specified and as directed.

M&L Preparatioin of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat primer.complete all as specified and as directed.

M&L Preparatioin of old steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets. complete all as specified and as directed.

M&L for providing false ceiling with anodised aluminium snap grid frame work for false ceiling with size of grid 605 x 605mm with aluminium main tee, cross tee size 25x25x1.6 mm and aluminium wall angle size 25x25x1.8 mm fixed to wall hanging from soffits\trusses\bracking using adjustable supporting hanger compressing of GI wire 4mm thick with locking clip.complete all as sepcified and directed by Engr-In-Charge.

M&L for Providing and fixing Non asbestos designer E-Board 4mm thick in ceiling fixed to snap grid as per manufacturers instructions complete all as sepcified and directed

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc compleete all as specified and as directed. .

M & L for brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down plastering on brick walls etc including racking out joints, hacking for key, scrabing down with water etc. complete all as specified and as directed.

M & L for 15 mm thick rendering in Cement Mortar 1:4 on fair faces of Brick works or Concrete surfaces and finishing even and fair without using extra cement. complete all as specified and as directed.

M&L for two coats of cement base pain over a coat of primer on new surfaces of wall including preperation complete all as specified and as directed.

Disconnecting existing tanks setting aside (or laying if required) for carry out the roof repairs cleaning and removing all scale & dirts etc from tanks & hoisting reconnecting & refixing in position of the tank capacity exc 250 Ltrs & n.exc 500 ltrs including necessary fittings all as specified and directed.

Disconnecting existing tanks setting aside (or laying if required) for carry out the roof repairs cleaning and removing all scale & dirts etc from tanks & hoisting reconnecting & refixing in position of the tank capacity exc 500 Ltrs & n.exc 1000 ltrs including necessary fittings complete all as specified and as directed.

Taking down chowkat with frame (without taking off shutter from the frame) n exc 1.50 Sqm eachcomplete all as specified and as directed.

All as per item No 70 above but area exc 1.5 Sqm n.exc 4 Sqm each complete all as specified and as directed..

Taking down shutter of any description not exc 1 Sqm each complete all as specified and as directed. complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm & n exc 2 Sqm each complete all as specified and as directed.

Taking down steel/aluminium windows, and aluminum doors, partions etc., of any size with frame and shutters and including with all connected accessories complete all as specified and as directed.

Taking down steel/aluminium windows, and aluminum doors, partions etc., of any size with frame and shutters and including with all connected accessories but ventilators complete all as specified and as directed.

M & L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing.complete all as specified and as directed.

M & L for 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F in frame at siteFactory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2, raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, as per specification & drawing complete all as specified and as directed.

S&F for 35mm thick factory made plain framed paneled shutter of 2nd class HW (any Number of panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm th venered particle board with veneering on both face kiln seasoned & chemically treated complete all as specified and as directed.

S & F 35mm thick 2nd class hard wood glazed skeleton shutters open rebated and prepared to receive glass and divided into square with plain, rounded, chamfered, mitred and rebated sash bars. complete all as specified and as directed.

S & F 30 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type oon both side complete all as specified and as directed. .

S & F 100mm long Stainless steel butt hinges with galvanised aluminium pin. complete all as specified and as directed.

S & F 100mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

S & F Aluminium handle 150mm fabricated type complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolts 150mm of extrded section complete all as specified and as directed.

S & F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S&F 300 mm long helical door springs including roller plate complete all as specified and as directed.

S& F for 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor

S & F, steel windows frame with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window. complete all as specified and as directed.

All as per item No 89 but without glazing bars complete all as specified and as directed.

S & F, steel ventilators frame with top hung shutter including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S & F Aluminium powder coated frame work for door / windows / ventilators with one or more rebates including joining heat for fixing etc complete all as specified and as directed.

S & F Aluminium powder coated door/window/vent shutters, aliminium section weighting 0.55 Kg/M including necessary joinging cleats, galzing clips, ruber neoprene pakcing handles 2 Nos in each door, hinges anodised aliminium snap beading screws etc, complete all as specified and as directed.

S & F aluminium deco Grills (DG 104) with F section Channel complete of 4mm thick for windows of aperture 50 mm complete all as spd and directed.

S&F pre-laminated particle board (12mm thick) Interior grade pre-laminated both side with decorative choice laminations fixed in alluminium door or frame work with screws or necessary fittings complete all as specified and as directed.

S & F galvanized mild steel wire cloth 0.56mm nominal dia of wire with avg 1.18mm width of aperture and fixed with tinned tacks.complete all as specified and as directed.

All as per item No 97 above but fixed in repairscomplete all as specified and as directed..

S &F for framed work such as grills, grating etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars(for windows); barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work cnforming to Fe 290. Gde E-165

Hacking out old broken glass any description & size from wooden/steel window and removal of rubbish from work site as directed complete all as specified and as directed.

S & F 3mm th sheet glass ordinary quality and fixed with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.

S & F 3mm th figured glass ordinary quality and fixed with oil putty in square not exceeding 0.50 sqm in each pane complete all as specified and as directed. .

S&F in repairs 19mm thick block board grade 2 quality, interior grade, commercial type on both faces fixed as in shutter/shelves of cup boards etc complete all as specified and as directed.

S&F aluminium/metal door seal with wire brush fixed at bottom of the door (to prevent the insets from outside approx length of 1 mtr) complete all as specified and as directed.

S&F in rep door closure hydraulically regulated disignatin No 3 universal type suitablefor door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

M & L for preparation of wooden surface and applying 2 coats of synthetic enamel paint over one coat of pink primer over 10cm width or girth complete all as specified and as directed..

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 lit n exc 500 lit and from mouths of circulating pipes, etc complete all as specified and as directed. and as directed

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 500 lit n exc 1000 lit and from mouths of circulating pipes, etccomplete all as specified and as directed. and as directed

S&F rotational moulded polyethylene water storage tanks 500 litre capacity incl (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling and taking down existing water tank complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical vertical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks complete all as specified and as directed.

S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified and as directed.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore complete all as specified and as directed.

S&F 20mm bore GI tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and as directed.

S&F 15mm bore GI tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and as directed.

ATUL ENTERPRISES

harshraj and co

VACON INFRASTRUCTURES

BEEGEE DESIGN SYSTEMS

SAI RUPA CONSTRUCTIONS

SURA INFRASTRUCTURE

RAM CHARAN CONSTRUCTIONS

K LAKSHMAN SINGH AND CO

PARDEEP AND CO

M/S P.SWAROOP KUMAR