PROVN OF NEW TOILET BLOCK FOR OR LIVING NEAR BLDG NO T 68 OF ECHH (O) INCL SPL REPAIR TO BLDG NO LMO 1/1 AND 1/3 INCL RO PLANT 250 LPH (INCLUDING PRE-FILTER STORAGE TANK 500 LTR AND FILTERED WATER STORAGE TANK 250 LTRS) AT HQ 101 AREA (ST) OF HQ 101

Amount

Dismantling plain or corrugated steel sheeting, any guage, thickness incl nainital or similar pattern as in roof coverings, complete, all as directed.

Dismantling boarding any description fixed in any position with nails complete, all as directed.

Dismantling Timber scantlings 40 sqmcm and over in section in any position framed work complete, all as directed.

Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete, all as specified and directed.

Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete, all as specified and directed.

Taking down shutters of any description nexc 1.0 Sqm refixing in same opening complete, all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm refixing in same opening complete, all as specified and directed.

Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each complete complete, all as specified and directed.

Taking down shutters of any description nexc.1.0 Sqm each complete, all as specified and directed.

Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as directed.

Taking up or down steel tubing with connections of 15 mm bore pipe including removal from site with all fittings complete all as specified and directed.

Taking up or down steel tubing with connections of 20 mm bore pipe including removal from site with all fittings complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in soft/loose soil, complete all as specified and as directed.

Excavating over areas, n. exc 1.5 m deep and getting out soft/disintegrated rock, complete all as specified and as directed.

Rough excavation not exceeding 1.50 m deep and getting out soft/loose complete all as specified and as directed.

Returning, filling incl spreading levelling watering and well ramming in layers n exc 25 cm thick each layer. complete all as specified and as directed.

Removing of excavated soil to a distance exc 250m but n exc 500m and deposited where directed n exc 1.5 m above the starting point, complete all as specified and as directed.

Removing excavated material exc 500m and nexc 1.5 km depositing where directed at a level n.exc 1.50m above the starting point, complete all as specified and as directed.

Earth filling under floors incl spreading, leveling in layers n.exc 25cm thick including well ramming and watering as reqd. complete as directed

M & L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete as directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded machine crushed stone aggregate as in foundation, mass concrete complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C2, as in plinth protection finished even and smooth with out using extra cement complete all as specified and directed.

M & L for PCC 1:3:6 C2 (40 mm graded aggregate) as in surface channels and drains, complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms,moulds,mitred/ stop endscomplete all as specified and directed.

M&L for foundations, including raftfs, footings, plinth beams, bases for columns etc., type nominal mix (1:1.5:3) (20 mm graded aggrgate) complete all as specified and directed.

M&L for RCC as in columns, pillars etc., type nominal mix (1:1.5:3) (20 mm graded aggrgate) complete all as specified and directed.

M&L for as in beam, lintel band over 1.50m span, type nominal mix (1:1.5:3) (20 mm graded aggrgate) complete all as specified and directed.

M&L formwork to sides of concrete foundation, plinth beams and other similar works with rough finished flat surface, complete, all as specified and as directed.

M&L formwork tosides of pillars, posts, struts, piers, columns and stanchions with rough finished flat surface, complete, all as specified and as directed.

M&L formwork sides and soffits of floor or roof beam, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams etc., with rough finished flat surface, complete, all as specified and as directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete, all as specified and as directed.

M&L mild steel TMT bars 5 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally in stirrups with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete, all as specified and as directed.

M&L for wrought second class hard wood in scantlings framed and fixed complete all as specified and directed.

Fixing only for wrought second class hard wood in scantlings framed and fixed complete all as specified and directed.

M&L for preparation of wood and wood based materials, new or old of any description and girth not otherwise described and treated with creosote oil complete all as specified.

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering/ cladding to including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed.

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering/ cladding to including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed.

S&F 2 mm thick fibre reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall etc complete all as specified and as directed.

S&F framed work as in doors or gates of angle or other section for fixing of sheets and similar works complete of Gde Fe-290(Gde E-165) all as specified and as directed.

S&F mild steel joist channel or angle or tee sections, ms tube fixed with ms flat iron cut in to shape drilled and fixed with screw etc conforming to Fe 410-W (Gde-E- 250) quality-A etc complete all as specified and directed.

S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete, all as specified and as directed.

S&F factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on front face & 2 mm plain colour PVC sheet on back face as per specification complete, all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing complete, all as specified and as directed.

S&F 30 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete, all as specified and as directed.

M &L glazed skeleton shutters open rebated and prepared to receive glass gauge etc (Without sash bars) , edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc 35mm thick of 2nd class hard wood complete, all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete, all as specified and as directed.

S&F 18/19 mm thick pvc boards fixed with screws to timber frame complete all as specified and as directed.

S&F 12 mm thick pvc boards fixed with screws to timber frame complete all as specified and as directed.

S&F 0.90 mm thick pvc decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete, all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete 150 mm long complete, all as specified and as directed.

S&F aluminium anodised barrel bolts and fixed of 200 mm length extruded aluminium alloy handles fabricated type, complete, all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised of size 150 mm completre complete, all as specified and directed.

S&F Extruded Aluminium, anodised, bow handles of size 150mm complete, all as specified and directed.

S&F butt hinges 100 mm medium weight mild steel cold rolled and fixed complete, all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) 200mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F powder coated(powder coating min 50 micron) anodised door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc complete, all as specified and as directed.

S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete, all as specified and as directed.

M&L for 3.00 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

Prelaminated particle board of 9 mm thk board ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing , white lamination , fixed with screws to timber frame work complete, all as specified and as directed.

M/L precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified and directed.

M/L precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified and directed

M&L 75mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M&L 100mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified tiles darkshade (square /rectangular) polished area of each tiles not exc0.36 in floors laid over and incl. 20mm thk 1:6 screed bed jointed pointed with coloured cement to match the tiles, complete, all as specified and directed.

M&L for vitrified tiles darkshade (square /rectangular) polished area of each tiles not exc0.36 in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 complete, all as specified and directed.

M&L for vitrified tiles lightshade (square /rectangular) polished area of each tiles nexc 0.36 sqm in floors laid over and incl. 20mm thk 1:6 screed bed jointed pointed with coloured cement to match the tiles, complete, all as specified and directed.

M&L for vitrified tiles lightshade (square /rectangular) polished area of each tiles nexc 0.36 sqm in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4, complete, all as specified and directed.

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete, all as specified and directed.

M&L Glazed ceramic Coloured Tile 350x250x7mm/ 450x350x7mm/ 300x450x7mm/ 300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L for machine pressed pre polished factory made pavement chequered cement concrete tiles of size 300 X 300 X 25 mm or 200 x 200 x 25 mm thick of approved design and colour , set jointed and pointed in neat cement slurry with grey cement and pigment over and including 20 mm thick screed bed in cement sand mortar (1:6) complete all as specified and as directed by Engr-in-charge.

M&L for 18/20mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4, pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as directed.

Labour only for chamfer, splays or arris in facework of Granite not exc 15mm wide complete, all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete, all as as directed.

M&L for rendering 15m thick on fair faces of brick or concrete work in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

Supply only Integral waterproofing compound as per manufacturer instruction and directed by Engr-in-charge.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

S&F in repairs Vitreous China EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.

S&F Vitreous china squatting pan, 'Orrisa Pattern" size 580x440mm white, with integral foot rests (excluding flushing cistern & flush pipe) complete all as specified and as directed.

S & F Vitreous china squatting pan of pattern 'long pan' size 580 mm white with 'P' or 'S' trap front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F vitreous China clay wash hand basin of size 550x400mm with pedastal incl waste coupling, Waste pipe 32mm dia. and brackets for fixing complete all as specified and as directed.

S&F in repairs Towel rack 600mm long with lower hangers, stainless steel of make Jaguar Cat Part No:- AKP-35781PS or equivalent in Marc/ Parryware/ Prayag

S & F Brass CP tubular towel rail 20 mm dia, 60 cm long including brackets compelete, all as specified and directed.

S&F in repairs Brass CP 2-in-1 Bibcock with flange of make Jaguar Cat Part No:-ORP-10041PM OR equivalent in Marc/Cera/Parryware

S&F CP Bib tap 15 mm bore, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. Make: - Prayag/ Cera/ Parryware

S&F in repair fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses of make Jaquar Cat Part No:- KUP-35005BPM or equivalent in Marc/Parryware/Prayag

S&Fin repairs 15 mm bore CP health Faucet cock with Flexible pipe 1 m long of make Jaguar Cat Part No:ALD-565 or equivalent in Marc/Parryware/Prayag

S&F in repairs Soap dish holder compelete, all as specified and directed. Make: Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/ Parryware/ Prayag

S&F in repairs Toilet roll holder with stainless steel flap of Make Jaguar Cat Part No:- AKP-35753PS OR EQUIVALENT IN Marc/Parryware/Prayag

S&Fin repairs Towel ring sqare shape stainless steel of Make Jaguar Cat Part No:-AKP-35721P or Prayag Cat Part No:-BA-05 or equivalent in Marc/ Parryware.

S&F in repairs corner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railling 60 cm long screw and cup washer. Make: Parryware/ Prayag/ Marc

S&F in repairs CP over head shower square shape of size 150x150mm of make Jaquar cat part No:OHS-CHR-1619 with CP shower arm of size 400x25x25 mm square shape for wall mounted showers flange of make Jaquar Cat partNo-SHA-455L400 or equivalent in Prayag/Hindaware/parryware

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) of make Jaquar cat part No:OPP-15125PM or equivalent in Parryware/Prayad/Hindware

S&F CP Hand shower 24x24 mm sqaure shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system of make Jaquar cat part No:HSH-35537 with flexible tube in chrome finish 1.5 m long with nuts of make Jaquar cat part No:SHA-571 or equivalent in Parryware/Prayag/Cera

S&F in repairs brass CP angular Stop cock, 15 mm bore, fancy type, capstan heads, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. Make:- Prayag Cat part No.8010 or equivalent model from make Cera/Jaguar/Parryware

S&F Grating doom 100 mm dia of PTMT.(Minimum weight 25 gms), complete all as specified and as directed.

M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete, all as specified and as directed.

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete, all as specified and as directed.

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete, all as specified and as directed.

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed

S&F PVC (SWR) bends 110mm dia, any radius with access door, complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia complete all as specified and as directed.

S&F PVC (SWR) bends 75mm dia, any radius with access door, complete all as specified and as directed.

S&F PVC(SWR) 75mm dia vent cowls, complete all as specified and as directed.

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, incl bolts and nuts and securing ends of stays to wall or roof complete, all as specified and as directed.

S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

S&F in repair rotational moulded polyethylene 1000 ltrs capacity water storage tanks , three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Supply and Laying Steel Water Tubing 20mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete, all as specified and as directed.

M&L for preparation of new wall surafces and applying two coats of white wash over one coat of primer complete all as specified and directed.

M&L for preparation of new wall surafces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete, all as specified and as directed.

M&L for preparation of new wall surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistancr , dirt resistance exterior paint of required shade including primer coat on new surfaces complete, all as specified and as directed.

M&L for preperation of new or previously untreated surface, applying two or more coats of 100% premium acrylic emulsion paint having VOC (volatile organic compound) less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 Sqm on new surface over 1mm thick wall care putty, complete, all as specified and as directed.

Complete removal of existing treatment on old wall surfaces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete, all as specified and as directed.

M&L for Synthetic enamel paint two coats over a coat of red oxide zinc chromate primer on new or previously untreated steel surfaces exc.10 Cm width or girth including necessary preparation of steel surfaces etc., complete, all as specified and directed by Engineer-in-Charge.

S&F in repairs 20 mm dia harrison rails, chromiun plated with wooden finished fancy type with fixing brackets stops , rollers etc all as directed and specified.

S&F in repairs 20 mm dia double rod brackets stops , rollers etc wooden finished, complete, all as directed and specified.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, lamp holders, regulators, switch, socket outlets, bell push, ceiling rose etc , removing material to store for keeping in safe custody for reuse at site and making good to disturbed surfaces of walls with cement sand mortar (1:6) and white/colour wash to match with existing surfaces etc complete all as directed.

M&L for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20mm dia. with accessories, concealed on wall/ceiling, incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note:- Switch, socket and fan regulators to be measured and paid for separately. PVC Conduit confirming to IS 9537 part I & III. Note (All chases will be cut by chase cutter only)

Description all as per serial item No 131 here in before but for one bell point controlled by one switch.

Description all as per serial item No 131 here in before but for socket outlet point 5 Amp on same board.

Description all as per serial item No 131 here in before but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No 131 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fixing modular bell push 1 way 6 A module 230/250 volt, AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make: Cona , Plaza, Anchor, Vinay

Supply and fixing modular switch 1 way 6 A module 230/250 volt, AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make: Cona , Plaza, Anchor, Vinay

Supply and fixing modular switch 1 way 16 A module 230/250 volt, AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make: Cona , Plaza, Anchor .

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz, AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make: Cona, Plaza, Anchor, Vinay

Supply and fixing modular sockets 6A, 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make: Cona, Plaza, Anchor, Vinay

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal, poly carbonate, complete all as specified.

Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all spcifided and directed.

S&F Mirror wall mounted LED batten fittings with all accessories 1X 12 Watt LED 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall complete all as specified and as directed including taking down old unserviceable light fittings complete, all as specified and as directed. Make- Philips cat Part 31403 12-Watt LED picture Light (Gold)

S&F wall bracket decorative LED fitting 2 light opal glass with chrome finishing warm white/ white type with lamp 12 watt complete with necessary connection complete all as specified and as directed. Make- Philips cat Part 31403 12-Watt LED picture Light (Gold)

S&F in repair Slim design LED recessed round/square type down lighter 12watt warm white/ white type flat panel PDC aluminium housing and PMMA diffuser etc. complete all as specified and as directed. Make: CG cat part No- LCDEP-12-WW or equivalent make from Philips/Bajaj.

S&F in repair wall mounted LED batten fittings with all accessories 1X 9/10 Watt LED 6000K, extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed. Make Bajaj Cat Part No BCLSB 10 NW or make CROMPTON Cat Part No. LCTL 9 CDL or equivalent make of Philips / Havells.

S&F in repair Spot Light fitting with Lamp 12 watt white/ warm white, with all necessary connection including taking down old unserviceable one, complete, all as specified and as directed. Make Bajaj Cat Part No BCLSB 10 NW or make CROMPTON Cat Part No. LCTL 9 CDL or equivalent make of Philips / Havells.

S& F M2 look new designer decorative wall lamp light with unique stylish steel fitting Sq off wram white poly cotton shade for bedroom LED 3 Watt complete with necessary connection complete including taking out old unserviceable one all as specified and directed. Make:- Havells/ Philips/Bajaj.

S&F Exhaust fan 230 volts, 300mm, plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wall including taking down old one Make Bajaj/Havell's/CG.

Supply and fixing LED security Building light LED 25 Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete. Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Phillips/ havells.

Supply and fixing LED security Building light LED 35 Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete. Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Phillips/ havells.

Supply and fix MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, complete, all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

Supply and fix MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, complete, all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

Supply and fix in repair MCCB Distribution board, TP&N, vertical, double door, 50 Hz with IP-43 protection,sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Note: MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule. Copper thimble shall be used for connection of cable.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series including taking down old one complete, all as specified and directed. Make: Havells Cat part No - DHMCCDPF006-040 or equivalent in Schnieder/GE/C&S.

Supply and fix MCB, single pole, C Series, 240 volts 6 to 32 Amps capacity fixed in DB's including taking down old one complete, all as specified and directed. Make: L&T/ Schneider/ Indoasian

S&F single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB complete, all as specified and directed. .

Supply and Fix Reverse Osmosis Plant of Output capacity of 250 LPH including Pre-filter Storage tank 500 Ltrs and filtered water storage tank 500 ltrs, cost of civil work, plumbing work, electrical work, necessary pipe and cable etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix and testing of storage type, electrically driven, ISI Marked, water heater (Geyser) of capacity 25 litres, vertical type, wall mounted, BEE 5 star rating, AC, single phase including necessary fixing arrangements, electric and water connection complete all as specified and as directed. Make: Havells Cat part no. GHWAMGTWH025 or equivalent make in Racold / Bajaj/ LG.

S&F heat resistant PVC connection pipe for hot and cold water, 15mm size, 450 mm long with PTMT nuts, complete, all as specified and as directed. Make: Parayag/ Polytuf/ Havells

Supply and laying GI tubing medium grade, for geyser connection, 15mm bore with all GI fittings, fixed to walls and ceiling or laid in floor for cable crossing, complete, all as specified and as directed.

Supply and fix as in repairs MCCB four pole, 415 Volt, 40 to 63 Amps, 16 KA , fixed thermal & magnetic setting complete all as specified and directed. Make: Havells Cat Part No: IHLGNF0063 / L&T cat part no. CM9793300H2 or equivalent model from Make:- Siemens / Schneider / Legrand / L&T.

M&L for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH, ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead incuding medium grade, ISI marked, PVC conduit not less than 20mm dia. with accessories, concealed on wall/ceiling, including taking down unservicable one, complete, all as specified and directed. Note: (i) Two run of 6.0 sqmm cable, one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length. (ii) Cuttting of chases in the wall of appropriate size shall be carried out with electric cutter machine. (iii) Necessary plastering in the disturbed surface of wall and distempering/ white washing to match the existing colour shall be included in the unit rate quoted. Make- Cable- Finolex/RR Kabel/Havells, PVC Casing Capping- Presto plast/ Finolex/ Kalinga.

M&L for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH, ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including medium grade, ISI marked, PVC conduit not less than 20mm dia. with accessories, concealed on wall/ceiling, including taking down unservicable one, complete, all as specified and directed. Note: (i) Two run of 4.0 sqmm cable, one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length. (ii) Cuttting of chases in the wall of appropriate size shall be carried out with electric cutter machine. (iii) Necessary plastering in the disturbed surface of wall and distempering/ white washing to match the existing colour shall be included in the unit rate quoted. Make- Cable- Finolex/RR Kabel/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

S&F 15mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors as instructed complete all as specified and directed.

Supply and fixing factory made IP-65 (Dust and power jet Proof according to IEC 60529) opaque street light junction box of size 900mm X 300mm X 170mm made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated made of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper terminal, with locking arrangement suitable for fixing TPN DB 4 way and energy meter single phase with glass for showing meter reading and 02 nos M40 size cable gland and one M32 size gland suitable up to 16 Sqmm cable etc. including taking down old unserviceable junction box, complete all as specified and directed. Make: HENSEL or equivalent in Sintex .

M&L for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete including taking down old unserviceable one, all as shown in Electrical Plate No 3 of SSR part -I.

M/S T N CONSTRUCTION