CONSTRUCTION OF 2 CSC AT GMS CHOWDRIGUND

Earth work in excavation in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 1 M from edge of cutting.

P/L stone soling hand packed on level incl ramming with heavy rammers incl. all carriage upto site of work

(1:3:6 ) stone aggregate 20mm nominal size aggregate

P/L in position of Reinforcement cement concrete (1:1.5:3 ) stone aggregate 20mm nominal size aggregate excluding the cost of centring and shuttering all work upto plinth level

Reinforcement for RCC works incld. straightening bending cutting placing in position and binding all complete (TMT Bars

Centring and shuttering incl strutting propping etc and removal of form work

Centring and shuttering incl strutting propping etc and removal of form work

Centring and shuttering incl strutting propping etc and removal of form work

S/S of Boulder/GSB filling under rooms floors incl. watering and ramming with hand rammer including carriage.

Brickwork with FPS brick of class designated in 1:6mix in superstructure above plinth upto floor five level

Extra for brick work in superstructure above plinth level upto floor v level (by manual means)

Half brick masonry with common burnt clay (non-modular) bricks of class designation Cement mortar 1:3 ( 1 cement : 3 coarse sand)

Providing and fixing aluminum work for doors, windows, ventilators and partitions (frame) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. Powder coated aluminum (minimum thickness of powder coated 50 microns). Incl. shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required, 4mm Thick ACP Sheets & all other accessories (Handles, Tower-Bolt, Al-Drop etc.) - (14-Guage Material)

12mm thick plaster in Cement Mortar 1:4 mix. Including a floating coat of neat cement.

12mm thick plaster in Cement Mortar 1:4 mix. Including a floating coat of neat cement.

cement concrete flooring 50 mm thick

Providing and fixing 1st quality ceramic glazed tiles of size 600x600mm conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Providing and laying vitrified floor tiles in sizes 600x600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Stone aggregate below 40mm Avg lead 20Km including head load

Bricks avg lead 20KM head load

sanitary fittings PN-16 pipe, 16mm OD(SDR-7.4)

ppr union 20 mm

tankey nipples 20 mm

gate value

pipes 75 mm

pipes 100 mm pvc pipes

Floor Trap (100mm)

Tee 100mm

Reducer 100mm to 75mm

P/F of water closet squarting pan (W.C) Indian Type Orrisa pattern white vitereous china with 100mm pvc "B type" P or S trap, 10 litre capacity low level flushing cistern of approved make with flush pipe, manually controlled device (handle Lever) with all fittings and fixtures complete, incl. cutting and making good the walls and floors whenever required (580x440mm with intergal type foot rest)

masonary chamber 30x30 x50

waste pipe 32 mm

CP Brass Bib Cock 15mm

P/F CP Floor Grating (100mm)

P/F CP Angle valve 15mm Nominal Bore concealed type Jaquar or Equivalent.

P/F PVC water storage tank Tripple layer Sintex or equvalent make

S/L of precast RCC rings of 6inch width and 3'dia and 1.25 inch thick for soakage and septic tank incl earthwork in excavation, RCC cover in M20 grade with reinforcement for soakage pits & , incl. disposal of excavated earth beyond the site, disposed earth is to be leveled and neatly dressed incl. dewatering of trenches during execution. (if required).

p/f of lighing points complete job

Provsion for CIB, Photographs and other unforeseen items/additional pvc pipes

cement concrete jali 6mm