Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.9 LAccepted-AOC SHOP NO 48 KHARAR ALIPUR ALIPUR HISAR HARYANA 125044 | HISAR | HISAR | HARYANA | 125044 | ₹22.9 L Quoted ₹23.7 L | L1 | Accepted-AOC Lowest Bidder |
| 2 | L2₹25.1 LRejected-Finance | ₹25.1 L | L2 | Rejected-Finance Being L2 |
| 3 | L3₹26.1 LRejected-Finance | ₹26.1 L | L3 | Rejected-Finance Being L3 |
| 4 | L4₹26.4 LRejected-Finance | ₹26.4 L | L4 | Rejected-Finance Being L4 |
| 5 | L5₹26.6 LRejected-Finance 1849 JUGRAJPUR SACHENDI KANPUR KANPUR NAGAR UTTAR PRADESH 208023 UDYAM UP 43 0012110 | KANPUR NAGAR | UTTAR PRADESH | 208023 | ₹26.6 L | L5 | Rejected-Finance Being L5 |
| Sl No | Description | Qty | Unit | Balaji Construction Co. L5 | Shiva Constructin Co. L8 | M/S KAVITA CONSTRUCTION L2 | M/S SM BUILDER CO L1 | M/S RR ENGINEERING CO L4 | PRINCE CONSTRUCTION L3 | Deepak contractor L7 | S R BUILDERS L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkats or frame with shutter, without taking off shutter from the frames not exc 1.5 Sqm each and making good the hold fast notch/ disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) complete | 45 | Each | 40 ₹1,800 | 50 ₹2,250 | 40 ₹1,800 | 20 ₹900 | 50 ₹2,250 | 20 ₹900 | 140 ₹6,300 | 50 ₹2,250 |
| 2.00 | Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) complete | 14 | Each | 40 ₹560 | 50 ₹700 | 40 ₹560 | 22 ₹308 | 50 ₹700 | 20 ₹280 | 180 ₹2,520 | 75 ₹1,050 |
| 3.00 | S&F Powder coated Anodised aluminium frame for doors, windows, ventilators and partition with one or more rebates including joining cleat for fixing etc. complete all as specified. | 357 | Kg | 550 ₹2.0 L | 550 ₹2.0 L | 300 ₹1.1 L | 400 ₹1.4 L | 450 ₹1.6 L | 550 ₹2.0 L | 300 ₹1.1 L | 492 ₹1.8 L |
| 4.00 | S&F Powder coated Anodised aluminium door, windows, ventilators shutters/partition, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including provision for cooler or AC opening complete all as specified.
Note : (i) Glass panes and wire cloth shall be measured & paid separately .
(ii) Rubber beading will not be weighed and not to be paid seperately. | 89 | Sqm | 2,700 ₹2.4 L | 3,200 ₹2.8 L | 2,500 ₹2.2 L | 1,998 ₹1.8 L | 2,000 ₹1.8 L | 2,900 ₹2.6 L | 790 ₹70,310 | 2,322 ₹2.1 L |
| 5.00 | S&F factory made single extruded WPC(Wood polymer compsite)solid door window/ceosetory windows& othr frames/chowkats of size 65x125mm comprising of virgin PVC polymer of K value 58-60(suspension grade calciumcarbonate and natural fibers (wood powder/rise husk0 and non toxic additives (maximum toxicity index of 12 for 100gms fabricated with miterd joints after applying with PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum,screw withdrawl strength of 2200N (face) & 1100N (edge) ,minimum comp ressive strength of 58 n/mm2 ,modules of elasticity 900n/mm2 and ressisistance to spread of flame of class A category with property of being termite/borrer proof ,water /moisture proof and fire retirdent and fixed in position with MS hold fast /Lugs/SS dash fasteners of required dia and length complete all as spd and direction of engr-in-charge. | 52 | RM | 550 ₹28,600 | 1,000 ₹52,000 | 850 ₹44,200 | 550 ₹28,600 | 550 ₹28,600 | 700 ₹36,400 | 600 ₹31,200 | 290 ₹15,080 |
| 6.00 | Supply and fixing factory made single extruded WPC (wood polymer composite ) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade ),calcium carbonate and natural fibres (wood powder/rice husk /wheat husk )and toxic additives (maximum toxicity index of 12 for 100gms ) having miniumum density of 650 kg/cum and screw withdrawl strength of 1800N (face) & 900N (Edge ), miniumum compressive strength 50N/mm2,modulus of elasticity 850 N/mm2 and resisitance to spread of flame of class A category with property of being termite / borer proof ,water/moisture proof and fire retardant .WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S S screws all as per direction of Engineer -In-Charge (Note : stainless steel butt hinges and necessary SS screws be paid separately) | 18 | Sqm | 2,400 ₹43,200 | 3,200 ₹57,600 | 3,300 ₹59,400 | 2,800 ₹50,400 | 2,500 ₹45,000 | 2,400 ₹43,200 | 2,500 ₹45,000 | 2,780 ₹50,040 |
| 7.00 | S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (withsash bars) edges but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part-I Section 8 Clause 8.24(a), fitted to chowkats complete all as directed. | 18 | Sqm | 1,700 ₹30,600 | 2,000 ₹36,000 | 1,200 ₹21,600 | 1,200 ₹21,600 | 1,000 ₹18,000 | 1,200 ₹21,600 | 1,180 ₹21,240 | 1,622 ₹29,196 |
| 8.00 | S&F cast brass butt hinges of size 100mm , mild steel hinge pin ISI marked complete all as specified | 60 | Each | 25 ₹1,500 | 90 ₹5,400 | 40 ₹2,400 | 30 ₹1,800 | 50 ₹3,000 | 20 ₹1,200 | 90 ₹5,400 | 20 ₹1,200 |
| 9.00 | S&F 150mm long aluminium handle cast type anodised complete all as specified and directed. | 20 | Each | 40 ₹800 | 70 ₹1,400 | 50 ₹1,000 | 50 ₹1,000 | 50 ₹1,000 | 30 ₹600 | 40 ₹800 | 50 ₹1,000 |
| 10.00 | S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete | 10 | Each | 150 ₹1,500 | 250 ₹2,500 | 300 ₹3,000 | 200 ₹2,000 | 250 ₹2,500 | 130 ₹1,300 | 230 ₹2,300 | 110 ₹1,100 |
Updated dates
Tender Value
₹38.7 L
EMD Value
₹77,460
Closing Date
12 Feb 2026, 6:00 pmClosed
GE Hisar
GE Hisar
SPECIAL REPAIR TO OTM BLDG NO T-1344 (RECOVERY PL), T-1346 (ANCY PL-1), T-1347 (ANCY PL-2) AND T-1350 (JCOs ACCN WITH ATT TOILETs) OF 293 ARMD WKSP AT HISAR MIL STN UNDER GE HISAR
2026_MES_748354_1
GE(H)-64/2025-26
Open Tender
Civil Works
240 days
GE Hisar
As per NIT
6 documents required · 6 mandatory
₹500
GE Hisar
₹77,460
Yes
19 Mar 2026
13 Jan 2026
20 Feb 2026
13 Jan 2026
12 Feb 2026
28 Jan 2026
Taking down chowkats or frame with shutter, without taking off shutter from the frames not exc 1.5 Sqm each and making good the hold fast notch/ disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) complete
Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) complete
S&F Powder coated Anodised aluminium frame for doors, windows, ventilators and partition with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F Powder coated Anodised aluminium door, windows, ventilators shutters/partition, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including provision for cooler or AC opening complete all as specified. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately.
S&F factory made single extruded WPC(Wood polymer compsite)solid door window/ceosetory windows& othr frames/chowkats of size 65x125mm comprising of virgin PVC polymer of K value 58-60(suspension grade calciumcarbonate and natural fibers (wood powder/rise husk0 and non toxic additives (maximum toxicity index of 12 for 100gms fabricated with miterd joints after applying with PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum,screw withdrawl strength of 2200N (face) & 1100N (edge) ,minimum comp ressive strength of 58 n/mm2 ,modules of elasticity 900n/mm2 and ressisistance to spread of flame of class A category with property of being termite/borrer proof ,water /moisture proof and fire retirdent and fixed in position with MS hold fast /Lugs/SS dash fasteners of required dia and length complete all as spd and direction of engr-in-charge.
Supply and fixing factory made single extruded WPC (wood polymer composite ) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade ),calcium carbonate and natural fibres (wood powder/rice husk /wheat husk )and toxic additives (maximum toxicity index of 12 for 100gms ) having miniumum density of 650 kg/cum and screw withdrawl strength of 1800N (face) & 900N (Edge ), miniumum compressive strength 50N/mm2,modulus of elasticity 850 N/mm2 and resisitance to spread of flame of class A category with property of being termite / borer proof ,water/moisture proof and fire retardant .WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S S screws all as per direction of Engineer -In-Charge (Note : stainless steel butt hinges and necessary SS screws be paid separately)
S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (withsash bars) edges but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part-I Section 8 Clause 8.24(a), fitted to chowkats complete all as directed.
S&F cast brass butt hinges of size 100mm , mild steel hinge pin ISI marked complete all as specified
S&F 150mm long aluminium handle cast type anodised complete all as specified and directed.
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete
S&F 150mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified.
Excavation in post holes (or Similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface in soft/loose/hard/dense soil complete all as specified and as directed.
Removing excavated material to a distance n.exc 50m and depositing where directed at a level n exc 1.5 m above the starting point
M&L for providing cement concrete 1:3:6, type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concreting complete all as specified and as directed.
M&L for MS framed work as in truss, purlins, cooler stands conforming to grade E-165 (Fe-290) or Fe-310-O of MS angle or other sections, such as grills, gratings,bracket for truss with ends of bar shouldered and / or riveted or forged into spikes; framed guard bars; railings and like completed all as directed by Engineer-in-charge.
S&F Door closer hydraulically regulated of Aluminium (extruded section body), designation No 2, universal type, suitable for door shutter of 701 to 850mm in width and of weight between 36 to 60 Kgs complete all as specified and directed.
M&L inclding preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or gith with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge
M&L for preparation of new steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
S&F Sheet glass 4.00 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
S&F 4 mm thick figured glass fixed with and including necessary rubber gasket and aluminium beading complete all as specified and directed.
S&F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples
Dismantling asbestos cement corrugated or semi corrugated sheets as in roof covering all as specified.
M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.
M&L for pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified all as specified.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.
S&F, GI powder caoted snap grid of sizes 605 mm x 605 mm frame work for false ceiling with main tee 32x24x1mm thick, cross tee 26x24x1mm thick and wall angle 24x24x1mm thick, flange covered with PVC thin sheet including gypsum board 7-9 mm thick, duly finished surface (thin PVC layer on gypsum board as per manufacturer instructions) size 600mm x 600mm and the same to be placed in snap grid as in false ceiling and Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks complete including demolition of old brickwork all as specified and directed
Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified.
M&L for 10mm thick rendering in CM 1:6 over brick / conc wall surfaces finished to even & smooth w/o using extra cement complete.
M&L for 15mm thick rendering in CM 1:6 over brick / conc wall surfaces finished to even & smooth w/o using extra cement complete.
M&L Rough cast plaster as specified .(Rendering coat not less than 10mm thick in C:M 1:3 , while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even) on external wall upto cill height complete
M&L including preparation of newly plastered surface of wall and applying two coats of oil bound distemper using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length or 30 mtr the spray machine should be of reputed manufacturer with pro guard techonology and capability of tracking pressure and paint usage an certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface over and including one coat of acrylic waterbased interior grade primer @ 0.8 ltr (undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Contd/-....................
Allow 6-8 hrs to dry the surface for painting of subbsequent coats over and including water proofing cement based putty @ 1 kg(undiluted) per sqm of average thickness 1mm over the plastered wall after prepare the surface wven and smooth complete and sanding of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc, by skilled labour as per following steps :- (1):- Mix the putty powderr by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. (2) :- Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (3) :- Allow 6 to 8 hrs time to dry the putty surfaces.
M&L including preparation of newly plastered surface of wall and applying two coats of external emulsion paint using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length or 30 mtr the spray machine should be of reputed manufacturer with pro guard techonology and capability of tracking pressure and paint usage an certified by paint manufacturer and as mentioned in PS and accessories for applying external emulsion paint should be able to spray in hard to reach areas and penetration of external emulsion paint on the surface over and including one coat of acrylic waterbased exterior grade primer @ 0.8 ltr (undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Contd/-............................
Allow 6-8 hrs to dry the surface for painting of subbsequent coats over and including water proofing cement based putty @ 1 kg(undiluted) per sqm of average thickness 1mm over the plastered wall after prepare the surface even and smooth complete and sanding of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc, by skilled labour as per following steps :- (1):- Mix the putty powderr by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. (2) :- Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (3) :- Allow 6 to 8 hrs time to dry the putty surfaces.
M&L for preparation of old decorated, plastered or pointed surfaces of wall by complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" / 9" to make the surface free from dust, loose paint etc, by skilled labour and applying two coats of oil bound distemper using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length or 30 mtr the spray machine should be of reputed manufacturer with pro guard techonology and capability of tracking pressure and paint usage an certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface over and including one coat of acrylic waterbased interior grade primer Contd/-........................
@ 0.8 ltr (undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats over and including water proofing cement based putty @ 1 kg(undiluted) per sqm of average thickness 1mm over the plastered wall after prepare the surface wven and smooth complete and sanding of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc, by skilled labour as per following steps :- (1):- Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. (2) :- Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (3) :- Allow 6 to 8 hrs time to dry the putty surfaces. complete all as specified & directed by Engineer-in-Charge.
M&L for complete removal of existing treatment of wall and applying two coats of external emulsion paint using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length or 30 mtr the spray machine should be of reputed manufacturer with pro guard techonology and capability of tracking pressure and paint usage an certified by paint manufacturer and as mentioned in PS and accessories for applying external emulsion paint should be able to spray in hard to reach areas and penetration of external emulsion paint on the surface over and including one coat of acrylic waterbased exterior grade primer @ 0.8 ltr (undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Contd/-..................
Allow 6-8 hrs to dry the surface for painting of subbsequent coats over and including water proofing cement based putty @ 1 kg(undiluted) per sqm of average thickness 1mm over the plastered wall after prepare the surface even and smooth complete and sanding of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc, by skilled labour as per following steps :- (1):- Mix the putty powderr by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. (2) :- Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (3) :- Allow 6 to 8 hrs time to dry the putty surfaces.
Dismantling floor hearth or wall tiling incl cement mortar bedding complete all as specified.
M&L for non skid ceramic (digital) tiles (coloured) premium quality, 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
M&L forGlazed ceramic tiles in vertical surface 450X 350X 7mm thickset and jointed in neatcement slurry and pointedin white or colour cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces all as specified
S&F superior quality SS Curtain rod, 20mm dia with and including SS bracket 2 Nos of each opening and fency type SS side knob of required shape and size 2 Nos of each opening as approved by Engr- in charge and complete all as specified and directed.
Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed
M&L for light shade Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 as in floors complete all as specified and as directed.
M&L for light shade Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in walls etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat of 10 mm thick cement mortar 1:6 complete all as specified and as directed Make : Kajaria, Jhonson, Somany
Demolition of cement concrete as in ground floors and pavings not exceeding 15 cm thick below or above ground level (unreinforced).
M&L 50mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) in sub base ,floors etc
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed,
M& L for 75 mm thick PCC flooring 1:4:8 Type D-2 (using 40mm graded crushed stone aggregate)/brick coarse aggregate as in / subbase of floor finishes complete all as specified and as directed by the Engineer-in-charge.
M&L for 100 mm thick Hard core of broken stone or boulders of gauze not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface
Excavating in trenches n exc 1.5 m wide and n exc 1.5m in depth, for foundation, etc and getting out in soft/loose soil
Removing excavated material to a distance n.exc 50m and depositing where directed at a level n exc 1.5 m above the starting point
M&L for 75mm thick PCC (1:3:6) type B2 (using 20mm graded aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed in patchwork n exc 3.00 sqm each patch
M&L for Machine pressed precast conctete interlocking paver block glossy finish any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-40 Grade with grey cement and no pigment complete all as specified and directed by EIC. Make :- Chopdar, Sukhi Enterprise, Swasthik
M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment including screed bed in CM 1:4 complete all as specified and directed by EIC.
S&F in repairs factory made precast reinforced cement concerte ferrow (SFRC) manhole cover of size 1200x6000mmx60mm thick duty duty HD-20 grade conforming to IS 12592 complete all as specified and directed.
Taking up or down carefully 15 mm bore steel tubing and connections including cleaning for refixing or removal to store os size.
Taking up or down carefully 20 mm bore steel tubing and connections including cleaning for refixing or removal to store os size.
Supply&Laying of CPVC pipe, SDR 11 , 16 mm outer dia & fittings on walls/ceiling or laying in floors complete all as specified.including taking down old pipe
Supply&Laying of CPVC pipe, SDR 11 , 20mm outer dia & fittings on walls/ceiling or laying in floors complete all as specified.including taking down old pipe
S&F Brass Elbow for special fitting of 16 mm bore CPVC pipe complete all as specified and directed.
S&F Brass Tee for special fitting of 16 mm bore CPVC pipe complete all as specified and directed.
S&F Brass Elbow for special fitting of 20 mm bore CPVC pipe complete all as specified and directed.
S&F Brass Tee for special fitting of 20 mm bore CPVC pipe complete all as specified and directed.
M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, hand rails, cupboards frame and similar work con- forming to Fe.290.Gde-E-165 with and including necessary cutting and welding complete all as specified and directed.
S&F PVC (SWR) 75 mm dia of outlet nahani trap/floor trap with grating including jointing with solvent cement
S &F salt glazed stone ware gully traps squre of size 150 x 150 mm including setting & jointing to drains in CM (1 ; 2) including eartwork, concrete in beds, surrounds, kerbs ettc and CI grating etc complete fixed in repairs, all as directed by Engr - In- Charge.
S&F in repairs 75 mm bore pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
S&F in repairs 110 mm bore pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
Supply and fixing 75 mm bore PVC (SWR) bends any radius with access door complete all as specified.
Supply and fixing 110 mm bore PVC (SWR) bends any radius with access door complete all as specified.
S&F in repair 110mm bore PVC (SWR) ISI marked single branch piece, (Single ‘T’) equal or unequal provided with access door complete all as specified.
S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured , including fixing bolts etc including PVC seat cover white flat bottom including MS, CP or aluminium anodised hinges devices including PVC low level flushing cistern 10 ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.
S&F in repair , PVC connection 450 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified.
S&F rotational moulded polythylene water storage tanks (cylindrical vertical with colsed top) hoisted and fixed in postion all as spd and directed of 1000 ltrs capacity. Including dismantling of the tanks (Make : Sintex/Ashish of ISI marked)
S&F in repairs Towel rail 600mm long of stainless steel fixed with and including Chromium plated brass screws and plastic cleats (Minimum weight 190gms).
S&F gun metal globe or gate valves with iron wheel head, screwed boh ends for iron pipe and fixed of 20mm dia on stone, concrete, block, slab or wall in repairs of ISI marked
S&F in repairs 15 mm dia chromium plated fancy type angle cock with wall flange consealed type of equivalent make specified here in after complete all as specified and directed.
S&F Waste coupling of PTMT(half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms)®
S&F 32mm dia PVC flexible waste pipe with socket for union, for WHB/urinal/sink complete all as specified.
S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engineer in Charge
S&F in repairs 10 Itrs PVC (White) valve less cyphonic action type, flushing cistern low level with inlet ball valve float, handle. aluminium brackets for bottom support fixing with gutties embeded in wall with drilling machine etc complete all as specified and as directed by Engr-in-Charge.
S&F in repairs 15mm dia Brass L Bend CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, with or without lettered 'HOT' or 'COLD' with long screwed shanks and flynuts, screwed for iron pipe and fixed fancy type complete all as specified and directed by Engineer-in-Charge.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F in repair water closet vitreous china squatting pan ‘Pedestal’ pattern whiteincluding cast iron 'P' or 'S' trap of 100 mm dia and connection to trap including cement concrete, and to flushing pipe, anti-syphonage pipe etc, including making good to floor, complete all as specified.
S&F in repairs Vitrous china wash hand basin, white, flat back of size 550 x 400 mm white excluding taps, and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets, PTMT waste coupling of 32 mm dia (half or full threaded )(Min wt 45 gms /40 mm -60 gms) & waste pipe as suitable complete all as specified and directed.
S & F 15 mm dia Pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
Supply and fixing Fiber Glass Reinforced plastic (FRP)Door Frames of cross section 90 mm x 45 mm havingsingle rebate of 32 mm x 15 mm to receive shutter of 30mm thickness.The minte shall be moulded with fireresistant grade unsaturated polyester resin and choppedmat. Door frame laminate shall be 2mm thick and shallbe filled with uitable wooden block in all the three legs.The frame shall be covered with fiber glass from all sides.M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.
Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled doorshutter of required colour and approved brand andmanufacture, made h fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of easoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.
Taking down carefully copper/aluminum point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed.
M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including modular press steel with cover plate and frame, complete, all as specified & directed.
All as per item No. 90.00 (here-in-before) but for one fan point controlled by one Number one way switch.
All as per item No. 90.00 (here-in-before) but for one 5 Amp socket outlet on independent board controlled by one Number one way switch on independent board.
All as per item No. 90.00 (here-in-before) but for one 5 Amp socket outlet on the same board controlled by one Number one way switch on same board.
All as per srl item No. 90.00 (here-in-before) but for 15 Amp socket out let by using 2.50 sqmm PVC insulated unsheathed copper conductor cable FRLS multi strand on independent board including provn of 2.50 Sqmm unsheathed, multi stranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed.
S&F modular type switch , flush type, single pole, one way, 5/6 Amp, 230 Volts all as specified & directed.
S&F modular type switch flush type, single pole, one way, 15 Amp, 230 Volts.
S&F modular type socket outlet multipurpose 3 Pin 5/6 Amp (with 2 pin outlet also) 230 volts AC complete all as specified and directed.
S&F modular type socket outlet multipurpose 3 Pin 15/16 Amp (with 3 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed.
S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.
S&F in repair of modular type ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed.
S&F LED light fitting 1x40W,240V, 50 HZ, regal batten for LED including ultra bright glass LED Tubelight , Aluminium Housing with very high efficacy, single / double side connection all as specified and directed.
S&F lamp holder, insluated body,including 15 Watt led bulb with back plate suitable for batten fittings & complete all as specified & directed.
S&F in reapir of street light LED light fitting 20 watt,240V, 50 HZ, pressure die cast housing with epoxy powder coating, IP65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40mm dia light grade 1.5m length and fixed with MS clamps of size 40x5mm - 2 Nos, nuts, bolts and washers fixed on wall all as specified and directed.
S&F in repair of MCB single pole, 240 volts, 6 Amps to 32 Amp breaking capacity 10KA complete all as specified and directed.
S&F in repair of M.C.B. SPN, 240 Volts, 40 Amps breaking capacity 10 KA complete all as specified and directed.
S&F in repair of sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.
S&F Sub main wiring with two single core cable PVC insulated unsheathed of copper multi stranded conductor FRLS cable of size 6 sqmm, 1100 votls grade drawing through and including steel conduit 25 mm dia including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 6 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly complete all as specified and directed including taking down old unserviceable submain wiring. Note:- Two lengths of 6.0 Sqmm cable, one length of 6 Sqmm cable and one length of steel conduit will be measured as one length.
M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 5 of 1991 (Part-I) including taking out old existing earthing complete all as directed.
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
BOQ_838053.xls
BOQ • 0.30 MB
TENDERDocumentsGE64.pdf
Tender Documents • 1.91 MB
Download all tender documents and submit your bid