REAIRS TO FLOORING WALL TILING PLASTERING JOINERY SANITARY FITTINGS CHAJJAS ROOF AND OTHER CONNECTED WORK IN ZONE C AREA AT NDA KHADAKWASLA

Amount

Dismantling floor or wall tiling of any description and size including cement mortar bedding (but not backing), removing rubbish off the premises com[plete all as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc including cleaning off premises where directed

Taking down cement plaster on brick or stone walls etc including raking out joints,hacking for key ,scrubbing down with water etc complete all as directed.

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including cleaning off premises where complete all as directed

M&L for 75 mm thick PCC (1:4:8) type D2 (Using 40 mm graded stone aggregates as in sub base complete all as specified and directed

M&L for light colour non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) in floors etc, area of each tile exc 0.11 sqm and n. exc 0.18 sqm, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 20 mm thick screed bed or bedding layer in CM (1:4) complete all as directed.

M&L for Colored ,Glazed ceramic tiles in vertical surfaces 350x250mmx7mm / 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or color cement to match, laid over and including 10 mm thick plaster in cement mortar (1:4), incl taking down plaster complete all as specified.

M&L for joint free Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and incl 15 mm thick screed bed or bedding layer in CM (1:4) complete all as directed.

M&L for machine cut cuddapa stone slab 20 to 25mm thick over cement screed base 15 mm CM (1:4),laid and pointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete all as directed.

M & L for machine cut superior quality Kota stone slab flooring 20-25 mm thick over cement screed , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete match including bulnosed to edges complete and including 20 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed

M&L for rough dressed sahabad stone slab flooring (30 mm thick) including bedded and jointed in cement mortar (1:6) and pointed in cement mortar (1:3) complete all as specified and directed.

Ditto all as per Item No. 12 above but except sahabad stone

M&L for Screed bed (or) bedding layer of mortar 15mm thick for laying floor finishes cement mortar (1:6) complete all as specified and directed.

S & F glossy finish Chequered cement concrete tiles 20cmx20cmx 25mm thick, set, jointed and pointed in neat cemeant slurry in floors with grey cement and pigment complete all as specified and directed.

M&L for glossy finish precast conctete interlocking paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including 30mm thick sand chusioning

M&L for 100 mm thick PCC (1:2:4) Cement concrete type B2 (Using 40mm graded stone aggregate) & Finishing cement concrete surface even and smooth Without using extra cement complete all as specified and directed

S&F in repair Water closet vitreous China squatting pan, ‘Orissa’ pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) connection to trap and squatting pan including P' trap set in and including concrete etc. complete all as specified and direted including making good to floor

S&F in repair wash down water closet (Pedestal pattern), white incl traps and all fittings complete

Dismantling of cast iron 100 mm bore pipes jointed in cement motar

Dismantling of cast iron 75 mm bore pipes jointed in cement motar

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor complete all as directed.

S&F in repair for 75mm bore dia PVC (SWR) bends with access door complete all as directed.

S&F in repair for 75mm dia PVC (SWR) branch piece single(single Y) equal or unequal with access door complete all as specified and directed

S&F in repair for 75mm dia PVC (SWR) vent cowl complete all as specified and directed

S&F in repair for 100mm bore dia PVC (SWR) bends with access door complete all as directed.

S&F in repair for 100mm dia PVC (SWR) branch piece single(single Y) equal or unequal with access door complete all as specified and directed

S&F in repair for 110mm dia PVC (SWR) vent cowl complete all as specified and directed

M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

Excavation in trenches in Soft/Loose soil n. exe 1.5m wide & n. exe 1.5m depth for foundation etc n.exe 10sqm on plan and getting out in.

Demolition and breaking up drain pipes ( SWG,AC or RCC pipes ) set in CM 150mm dia.

M & L for providing bed to drain pipes 150mm dia in cement concrete (1:3:6) type C2 using 40mm graded stone aggregate including packing under & haunching against the sides of pipes after they are laid & tested.

M & L for providing reinforced cement concrete pipes 150mm dia class NP 2 with collars laid and jointed with cement jointed all as directed

Cutting into existing manholes for connecting new drains internal dia of pipe 150mm dia making good to pipe & rendering cutting out existing benching for forming branch channel (1/2 round or 3/4 section in cement concrete (1:2:4) type B-1, smooth finished .

Returning filling in including spreading levelling, watering & well ramming in layers n. exe 25cm

Removing excavated material any type of Soil n. exe 50m and depositing where directed at a level n. exe 1.50m above the starting point in

M & L for providing plain cement concrete 1:2:4 type B1 using 20mm grade agg. as in surfaces channels & drains

M & L for providing plain cement concrete 1:2:4 type B1 using 20mm grade agg. as in coping including weathering slightly, rounded or chamfered angles and throating and necessary use and waste of form work complete all as directed

M&L for providing precast RCC (1:2:4) type B1 (Using 20mm grade stone aggregate as in cover slabs for manholes set in CM (1:6) complete all as directed. ( Note : Reinforcement shall be measured & paid separately)

S & F for providing mild steel TMT bars 6 to 8 mm dia cut to length bent to shape required includig cranking, bending etc & binding with ms wires (annealed) n. exe 0.9mm dia complete all as directed.

S&F for providing MS bands, straps and handles for MH covers and rungs in manholes and similar small articles, complete all as directed conforming to Fe 290 Gde -E- 165

Demolition of brick / block masonry / Stone masonry built in Cement mortar

M&L for precast cement concrete (1:3:6) type C-1 (Using 20mm graded stone aggregate ) block masonry with solid blocks exc10 cm thick in width and setting in cement mortar 1:6 complete in wall all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as directed.

M&L for rendering 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces as in ceiling finished even and smooth without using extra cement complete all as directed.

Extra for forming fair finished drain or channel girth not exc 30cm in cement concrete using extra cement including form mounds etcall complete all as specified and directed

M&L for preparing new plastered surfaces of walls applying two coats of distemper oil bound complete all as specified and directed

M&L for preparing new plastered surfaces of ceilling applying two coats of distemper oil bound complete all as specified and directed

M&L for preparing old/existing plastered surfaces of walls applying one coat of distemper oil bound as specified and directed

M&L for preparing old/existing plastered surfaces of ceiling applying one coat of distemper oil bound as specified and directed

Taking down up or down steel tubing and connections incl cleaning for re-fixing or removal to stores ,15mm dia pipes complete all as specified and directed.

Ditto all as per item No. 52 above but 20mm dia pipes.

Refixing of old serviceable 15 mm bore of steel tubing pipe take out from item No 52 and conection in new or old position on wall, cieling, floor etc complete all as specified and directed.

Ditto all as per item Np. 53 above but 20mm dia pipes take out from item above

S&F galvanised mild steel medium grade tubes 15mm dia bore with all fittings and fixed to wall , floor etc. complete all as specified and directed.

Ditto all as per No. 56 above but 20mm dia pipes.

Dismantling of existing water tanks Exc 250 not Exc 500 and removing to store

Ditto all as per item No. 58 above but exc 500 Ltr n. Exc 1000 Ltr capacity.

S&F in repairs Rotational moulded polye- thylene water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I

S&F in repairs Rotational moulded polye thylene water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I

S&F in repair 15mm dia tank Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms) including taking down old one complete all as specified & directed.

S&F in repair 20mm dia tank Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms) including taking down old one as specified & directed.

S&F in repairs Ball valves 15mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) including taking down old one complete all as specified and directed.

Ditto all as per Item No. 64 above but 20mm dia

S&F in repairs Bib taps 15mm dia, chromium plated ,fancy type ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including taking down old one complete all as specified and directed.

S&F in repairs Stop valves 15mm dia, chromium plated ,fancy type, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed including dismantling of old one complete all as specified and directed

S&F for Brass chromium plated shower rose 125mm size complete as directed and as per sample kept in office.

S&F in repairs for PVC flushing cistern valve less, syphonic action type low level, ball valve, float and handle with bracket fixed in repair of 10 ltrs capacity complete all as specified and directed including taking down old one.

S&F for Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including necessary cutting to floor tiles and connection to WC complete all as specified and directed

S&F PVC connection 15mm size with PTMT nuts of length 600mm.

S&F Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever castiron brackets, connecting union etc. overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm

S & F in repair Vitreous China wash basin, white, flat back, size 550x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets ,fixed in repairs

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed , screwed for iron pipe of bore 15 mm fixed in repairs.

S & F PVC connections 15mm size with PTMT nuts of length 450mm

S&F in repair Waste coupling of PTMT (half or full threaded) (Minimum weight 40 mm-45gms/40mm-60 gms) for 32mm bore dia pipe

S&F in repair Waste coupling of PTMT (half or full threaded) (Minimum weight 40 mm-45gms/40mm-60 gms) for 40mm bore dia pipe

S&F towel rail 600 mm long of CP brass, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified.

S&F Low density polyethylene (LDPE) pipes 40mm dia of pressure rating 6kgf/sq. cm

S&F doom grating 100mm dia of PTMT (Minimum weight 25gms)

Grating doom 125/100 mm dia with waste hole of PTMT. (Minimum weight 40 gms)

S&F Soap dish any type fixed to plugs with chromium plated brass screws minimum size 160x160x90mm

M&L for unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 50mm bore of pipes

Disconnecting water storage tanks 500 Ltr capacity existing tanks , setting aside (or lowering if required ) for repairs , cleaning etc and hoisting if required reconnecting and refixing in position. (Cleaning repairing, etc. measured separately)

Disconnecting water storage tanks 1000 Ltr capacity existing tanks , setting aside (or lowering if required ) for repairs , cleaning etc and hoisting if required reconnecting and refixing in position. (Cleaning repairing, etc. measured separately)

Cleaning and removing all scale and dirt, etc, from water storage tanks 500 Ltr capacity existing tanks and from mouths of circulating pipes, etc

Cleaning and removing all scale and dirt, etc, from water storage tanks 1000Ltr capacity existing tanks and from mouths of circulating pipes, etc

M&L for Writing letters or figures(block,Roman,Itallic or Indian)not exc 30cm high using synthetic enamel paint on any type of surfaces ,complete all as specified and as directed

S&F in repairs Gun-metal, globe or gate valves 15mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and direceted

S&F in repairs Gun-metal, globe or gate valves 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and direceted

Taking down chowkhats or frame not exc 1.5 sqm each with shutters (without taking off shutters from the frames)

Taking down chowkhats or frame not exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames)

Taking down shutters exe 1 sqm and n.exc 2 sqm each and removing

Hacking out old broken glass(any thickness, size, quality or discription) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads

M&L for solid PVC door frame of size 50x47mm ,made out of 5mm plain colour PVC sheet re inforced with MS square tube ,supplying and fixing in opening

S&F Factory Made Solid PVC Moulded Door Shutters With Particle Board Core 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed

S&F second class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed incl cutting holes and hold fasts fixing (split at one end)

S&F 35mm thick Factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24

M & L 35 mm thick Factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated

S&F 30mm thick second class hardwood skelten shutter glazed and skelton open rebated and prepared to receive glass with divided into squares with plain chamfered or rounded mitered and rebated sash bars any nubmers fitted with cut and mitered beads for securing glass size of members of windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b)

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F 1mm Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type

S&F anodised aluminium frame powder coated for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified.

S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified

S&F Powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F 100mm butt hinges cold rolled mild steel medium weight and fixed

S&F 100mm Aluminium handles, cast type, anodised

S&F 150mm Aluminium handles, cast type, anodised

S&F 75mm butt hinges cold rolled mild steel medium weight and fixed

S&F aluminium anodised barrel tower bolts of extruded section 100mm long

S&F aluminium anodised barrel tower bolts of extruded section 75mm long

S&F for aluminium anodised, barrel tower bolts 150mm long of ex- truded section and fixed

S&F 200 mm long aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections all as specified and directed

S&F for 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed also including taking down old one.

M&L for preparation of new wooden surfaces and painting two coats of Synthetic Enamel paint over a coat of pink primer.

S&F Sheet glass 3 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane

S&F in repairs for Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples to shutters including taking out wooden beads and re-fixed in the same position complete all as specified and directed (Note : The item considered in the scheduled to be executed in repair in patches only in repairs at various locationes as directed

S&F Aluminium (extruded section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets andincluding re-fixing in position complete all as specified and directed.

S & F 6 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/Alumi- nium frame work with screw as work in ceiling flat or sloping.

M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions

S&F Anodised aluminium snap grid frame work for false ceiling , the aluminium sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285. The snap grid consist of anodized aluminium main/cross tee of size as indicated. Snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as manufacturer’s instruction. The main and cross tees shall be jointed at junction/crossings with anodized aluminium angle bracket of size as indicated, if not indicated it shall be 15mmxl5mmx 1.5mm, weighing 0.12 Kg per running metre, fixed with sutiable mild steel, bolts nuts and washers, all as per manufacturer’s instructions. The snap grid (main/cross tee section) shall be supported at ends all along the wall with anodized aluminium angle of size as indicated, if not indicated it shall be 40mmx 25mmx2mm, weighing 0.36 Kg per running metre. Size of the snap grid shall be as indicated.

Excavating in post holes (or similar holes) each n. exc 0.5 cum getting out returning in and ramming earth or broken rubble mixed with earth around in layer not exc 25cms watering and removing surplus soil to a distance n.exc 50 m and making good surfaces in any hard and dense soil

M & L for PCC (1:2:4) type B2 (using 40mm graded stone aggregate) in foundation , filling and mass concrete

S&F rolled mild steel angle iron posts for fencing posts and struts split at bottom including flat iron 40x4 mm with necessary welding with drilling bolting or rivetting etc and similar work conforming to Fe 290 Gde E-165

S&F mild steel round bars , 10 mm dia and over cut to length , bent to shape as in staining to fencing.

Fixing only Chain link MS gavanised fencing any size ot type including line wires, any mesh, size and type of standard, rails, straining bolts etc including provision of bunding wire.

Supply only chain link MS galvanised fencing, 50mm x 50mm size with 3mm dia wire.

S&F for framed work as in doors or gates of angles or other section with gussest plate, rails, braces,etc complete drilled for fixing of steel sheeting or other covering door etc, to be prepared for hanging or sliding with and encluding either hooks and hinges or steel hanging door fitting incl of steel sheeting or other covering , running railand guides and hanging, also fastening and fixing complete all as specified and as directed

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel/iron surface of any description over 10 cm in width or girth

Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6).

M&L for raised pointing to random or polygonal rubble, uncoursed on brought upto courses in cement mortar (1:4)

Raking out joints/pointing to squared rubble masonry, coursed or uncoursed built in cement mortar

M&L for complete removal of existing water proofing treatment of any decription and layers from wall,roof,chajja's,gabble walls, edges (at any height )etc incl any number of screed bed or bedding layer of mortar if any complete and cleaning the surface free from dust and mud ,scrubbing down with water complete all as specified , cleaning off the premises all as directed

M&L for rendering 20mm thick in cement mortar (1:4) on concrete surfaces using integral water proofing compound as per mfr's instructions finished even and smooth without using extra cement (at any respective height of bldg ) complete all as specified and directed.

Supply only integral water proofing compound

M&L for cutting grooves in brick / stone wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3).

M&L for preparing plastered surfaces,with approved bituminous primer @100 gms/sqm and applying water proofing treatment on wall,roof,chajja's,gabble walls, edges (at any respective height of bldg )etc and stick with non-woven polyster matt modified APP Membrane 3mm thick as reinforcement weighing not less than 3.5 Kg/sqm and applying one coat of aluminium paint on top of the membrane (at any height ) complete all as specified

Demolition of concrete in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work

M&L for providing PCC (1:2:4) type B0 (using 12.5mm graded stone agg) as in roof kerbs and mud stope rounded or chamfered on edges complete all as directed.

M&L for type B1 (1:2:4) (20 mm graded aggregate) in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, in gabble walls as directing

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S&F Galvanised corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with 'L' type or 'J' type of cranked hook in lieu of screws and washers in roofs, walls etc with grade of zinc coating 275.

S&F Galvanised plain mild steel sheeting 0.63mm thick in Ridge, hips, valley gutter, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugatedsteel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall fixed with L hooks or J types or cranked bolts complete all as specified and as directed at site (i) Work to be execute in any respective ht of building

M&L Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified (i) Work to be execute in any respective ht of building. [ Note : The all items considered in the schedule to be executed in repair in patches & in occupied condition only in repairs at various locations as directed ]

M/S SHREE CONSTRUCTIONS

G V HAGAWANE

Sarkar Enterprises

Mourya Enterprises