REPAIR/MAINT OF MISC B/R WORKS AT MES IB , O-12, AOI OF AGE B/R-II AND REPAIRS TO FOOTPATH, HARDSTANDING, CHAIN LINK FENCING AND DRAINS AT ZONE OF AGE B/R-II UNDER GE (FW) KOLKATA

Amount

Dismantling floor hearth or wall tiling of any description of any thickness incl cement mortar bedding etc all as specified.

M&L Virified ceramic (Double charged) colored tiles dark shade 10mm thick (square/rectangular ) polished, area of each tiles exceeding 0.36 Sqm and but not exceeding 0.42 Sqm in floors etc set and jointed in neat cement slurry, laid over and including screed bed 20 mm thick in cement mortar 1:6 and pointed in white cement with pigment to match the surface complete all as specified and as directed.

M&L Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, coloured tiles as in floor etc, set and jointed in neat cement slurry, laid over and including screed bed 20 mm thick in cement mortar 1:6 and pointed in white or coloured cement to match the surface complete all as specified and as directed.

M&L Glazed Ceramic colored tiles of size 300x450x7mm thick in vertical surfaces, set and jointed in neat cement slurry, fixed over and including 15 mm thick screed bed in cement mortar 1:4 as backing layer and pointed in white or colured cement to match complete all as specified and as directed.

Demolition of stone/concrete slabs and tiles of any description or thickness in floors/vertical surfaces, etc laid, bedded and pointed in any mortar, etc complete all as specifed and directed by Engineer-in-charge.

M & L 18-20mm thick granite slab (table rubbed and polished) in pillars, window cills, cooking platform, stair steps etc and like set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing, laid over and including 15mm thick screed in cement mortar (1:6) complete all as specified and directed.

S&F 10mm thick toughened glass partition of size 1.2mx1.10m, set and jointed with adhesive including dismantling of old partition complete all as specified and as directed by Engineer-in-Charge.

S&F in repair chromium plated brass over head shower rose with arm (premium quality), with 3 flow, fixed to 15mm bore of iron pipe including taking down existing shower complete all as specified and directed. (Make : CERA, Cat No: F7040103 (for arm) & F7020305 (for shower) / PARRYWARE, Cat No: T9802A1 (for arm) & T9986A1 (for shower)/ESS ESS, Cat No: OH-104A / HINDWARE, cat No: F160051)

S&F in repair Chromium plated brass Wall mixer, concealed type incl concealed body, with both overhead and telephone shower arrangement, fixed with 15 mm bore Iron pipe including taking down existing mixer complete all as specified and directed. (Make : Jaquar, Cat No : CON-281KN / PARRYWARE, Cat No: G1417A1 / ESS ESS, Cat No: C-218 / CERA, Model : OCEAN / PRAYAG, Cat No: 9280 / HINDWARE, Cat No: F200022) NOTE: Telephone shower shall be measured and paid seperately.

S&F fancy type chromium plated telephonic hand shower with flexible tube and hook screwed for iron pipe including frame complete all as specified and directed. (Make : PARRYWARE, Cat No: T9983A1/ Ess Ess, Cat No: HS 105) / PRAYAG, cat No: BHS-91S / CERA, Cat No: F7030502 / HINDWARE, Cat No: F160053 or equivalent model in JAQUAR)

S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: CON-59KN / PARRYWARE, Cat No: G1453A1 / ESS ESS, Cat No: C-206 / CERA, Model: OCEAN / PRAYAG, Cat No: 9210 / HINDWARE, Cat No: F330043)

S&F in repair, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : JAQUAR, Cat No: CON-083FTK / PARRYWARE, Cat No : G1461A1 / ESS ESS, Cat No: T-108 / CERA, Model: OCEAN / PRAYAG, cat No: 9218/ HINDWARE, Cat No: F330052)

S&F in repair aluminium door closer hydraulically regulated designation No.3 universal type suitable for door shutter of 851 to 1000mm in width and of weight of 61 to 80 kg complete all as specified and directed.

S&F CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C / HINDWARE, Cat No: F850003 / CERA, Cat No: F8060302/ PRAYAG, cat No: BEA-26)

S&F in repair CP waste coupling for stainless steel sink complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-11 / JAQUAR. Cat No: ALD-705/ CERA, Cat No: F8050101)

S&F in repairs toilet paper holder, surface type with flap incl taking down existing holder complete all as specified and directed. (Make : JAQUAR, Cat No : CAN-1153N / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-38 / ESS ESS, Cat No: AC-506 / HINDWARE, Cat No: F880003)

S&F in repair Chromium plated brass Towel ring (premium quality) complete all as specified and directed. (Make : Ess-Ess, Cat No: AC-502 / JAQUAR, Cat No: ACN-1121BN / PARRRYWARE, Cat No: T6002A1 / PRAYAG, Cat No: BA-11 )

S&F in repair 15mm bore chromium plated central hole basin mixer (premium quality) without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed. (MAKE : ESS ESS, Cat No : C-211A / JAQUAR, Cat No : CON-167KNB / PARRYWARE, Cat No: G1414A1 / CERA, Model: OCEAN / PRAYAG, Cat No: 9250 / HINDWARE, Model: CONTESSA PLUS)

S&F in repair 15mm bore chromium plated two way bib cock with flange, fancy type complete all as specified and as directed. (Make : Ess Ess, Cat No: C-203 / JAQUAR, Cat No: CON-041KN/ PARRYWARE, Cat No: G1434A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9212/HINDWARE, CAT No: F330004CP)

S&F in repair Chromium plated brass Bib cock with wall flange, fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Ess Ess, Cat No: C-209 / JAQUAR, Cat No: CON-107KN/ PARRYWARE, Cat No: G1405A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9208 /HINDWARE, Cat No: F330041)

S&F in repair chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : JAQUAR, Cat No : ALD-573/ PARRYWARE, Cat No : T9941A1 / ESS ESS, Cat No: C-232D / CERA, Cat No: F8030401AB / HINDWARE, Cat No: F160002)

S&F in repairs 15mm dia soap dish, square, acrylic body with chromium plated base complete all as specified and directed. (Make : Jaquar, Cat No : AKP-35731P / PARRYWARE, Cat No: T6403A1 / ESS ESS, Cat No: AC-103 / PRAYAG, Cat No: BA-35 or equivalent model in CERA /HINDWARE)

S&F in repairs 15mm dia soap dish, chromium plated body complete all as specified and directed. (Make : PRAYAG, Cat No: BA-05 / CERA, Cat No: F5003106 / ESS ESS, Cat No : AC-503B)

S&F in repairs towel rack (premium quality) with lower hangar with hook incl taking down existing rack complete all as specified and directed. (Make : JAQUAR, Cat No: AHS-1581H / ESS ESS, Cat No: AC-308 / PARRYWARE, Cat No: T6008A1 / CERA, Cat No: F5003101 / PRAYAG, Cat No: BA-12)

S&F in repair Special designed Acrylic shelf of size (56Cmx13Cm) with CP wall flange all as directed by Engineer-in-Charge (Make: ESS ESS, Cat No: AC-107 / PRAYAG, Cat No: BEA-45 or equivalent model in CERA /HINDWARE / PARRYWARE)

S&F corner glass shelf 200 mm with brass brackets, as in repair complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-44 / JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1 / CERA, Cat No: F5005102)

Supply and fixing in repair chromium plated tumbler holder with glass tumbler & wall flange complete all as specified and directed. (Make : JAQUAR, Cat No: ACN-1141N /ESS ESS, Cat No: AC-504 / PRAYAG, Cat No: BA-26G or equivalent model in PARRRYWARE / CERA / HINDWARE).

S&F in repair connector pipe 450mm long copper connection 15mm dia with nut and rubber brass coupling at both ends for basin and geyser all as directed by Engineer-in-Charge. (Make: JAQUAR, Cat No: ALD-803AB / PRAYAG, Cat No: BMC-03 / CERA, Cat No: F8070403 or equivalent model in PARRRYWARE / HINDWARE).

S&F in repair chromium plated 3mm thick robe hook (2 way) fixed to wall for hanging purpose complete all as specified and directed. (Make : ESS ESS, Cat No: AC-105 / JAQUAR, Cat No: CAN-1161N / CERA, Cat No: F5002108 / PRAYAG, Cat No: BA-87 / HINDWARE, Cat No: F870007 / PARRYWARE, Cat No: T6007A1)

Supply and Fixing in repairs, Tubular towel rail (premium quality), 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / ESS ESS, Cat No: AC-101 / CERA, Cat No: F5004103 / PRAYAG, Cat No: BA-20 / HINDWARE, Cat No: F840013 )

S&F in repair Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type)including providing 32 mm dia chromium plated bottle trap, 32 mm dia chromium plated waste coupling, and making all necessary connections, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. (Make of WHB : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 / CERA, Cat No: S2040141) (Make of Bottle Trap: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C / HINDWARE, Cat No: F850003 / CERA, Cat No: F8060302/ PRAYAG, Cat No: BEA-26)

Supply and fix Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON / CERA)

Removing carefully aluminium doors, partitions and glass partitions and disconnecting all members and fixed to the same position and same opening all as directed.

Scraping of old distempered surfaces including preparation of old surfaces and applying 2mm thick POP, surface finished even and smooth as on wall complete all as directed.

M&L preparation of new wall surfaces and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and as directed.

M&L Preparation of old surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and as directed.

M&L Preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.

M&L Preparation of old plastered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and as directed.

S&F 25mm dia brass curtain rod alongwith and supports and rings at a gap of 4" fixed with necessary beadings complete all as specified and as directed. (Make: Vista sherwood or equivalent make as approved by GE)

S&F Brass decorative brackets for fixing curtain rod fixed to wall with screw, nails etc complete all as specified and directed. (Make: Vista sherwood or equivalent make as approved by GE)

M & L french polishing on surfaces of any description width or girth including cleaning and preparing the surfaces incl a coat of wood filler on new works with two or more coats complete all as specified and directed.

M&L for aluminium anodized window/ ventilators frame with size 63X38X2mm thick with Aluminium Sliding shutter frame 38mmx20mmx2mm thick with hold fast snap beading surfaces gasket handle locking arrangement stay peg etc incl glazing clip for fixing in repair incl taking down old window complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/slabs any thickness incl cover/support fillets, complete all as specified and directed.

S&F 12mm thick perforated partical board 600mmX600mm size fixed to Alum/wooden framed ceiling including applying two coat of synthetic enamal paint over one coat of pink primer as directed by the Engr-in-charge.

Supply and Fixing PVC solid wall lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per manufacturer’s specification and instruction and as directed by the Engineer-in-Charge.

Supply and Fixing 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

S&F in repair 10 to 12mm thick gypsum board false ceiling including 0.55mm thick GI perimeter channel, GI channel tray frame work having one flange of 20mm and another flange of 30mm with web of 27mm, GI intermediate channel of size 45mm x 0.90mm thick with two flange of 15mm each suspendded form the soffit of roof slab/truss @ 1220mm c/c with MS angle of suitable size fixed to soffit of ceiling with GI cleat and expansion fastern with and including necessary nuts and bolts and gypsum board is screwed to ceiling section with stainless steel screws @ 230mm c/c including applying two coats of plastic emulsion paint over a coat of primer to exposed surfaces incl taking down existing ceiling grid and board complete all as specified and as directed.

S&F in repair 4mm thick decorative `E' board of size 600x600mm incl aluminium snap grid made of aluminium main `T' 38x25x2mm thick and cross Tee and angle of section 24.5x24.5x1.4mm thick incl proper hanging arrangement (with 4mm dia galvanised iron wire and suitable adjuster) and incl applying two coat of acrylic distemper incl taking down existing ceiling grid and board complete all as specified and as directed.

M&L for making moulded of granite slab edges cutting grinding incl polishing to reqd shape complete all as specified and as directed.

S&F in repair Block boards 18 to 19 mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work (as in cup board) incl taking down old board complete all as specified and as directed.

S&F Decorative laminate type 1 (0.90 mm thick) of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap 30 mm complete all as specified and as directed.

S&F stainless steel handle 150 mm long decorative type complete all as specified and as directed.

S&F multi purpose cupboard lock complete all as specified and as directed.

S&F cupboard magnets heavy duty complete all as specified and as directed.

S&F Stainless steel tower bolt 120 mm long, heavy duty complete all as specified and as directed.

S&F in repair aluminium anodised door frame size 100mmX63mmX2mm thick and shutter size 50mmX45mmX2mm thick as in top rail and style and 100mmX45mmX2mm thick in bottom and lock rail including complete fitting and fixtures and mortice lock, 'D' type handles, hydraulic door closure and 5 mm thick glass panes incl dismantling of existing door frame complete all as specified and directed.

M&L in repair aluminium, anodised partition with frame of size 63X38X2mm thick and fixing hold fast with snap beading rubber gasket etc incl dismantling of existing door frame complete all as specified and directed.

S & F ornamental MS framed work such as grills, gate, gratings etc with end of bars shouldered and revets welded etc framed guard bars barrel iron door ladder framed balusters walk ways, railing etc all as specified including taking down existing frame work complete all as specified and directed.

Cutting holes in brick wall exc. Half brick work but not exc one brick work built in cement mortar for inserting hold fast and making good to dismantaled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as specified and directed.

S&F hold fast for window &doors, made to shape as required all as directed at site.

S&F in repair acrylic bathroom cabinet box with mirror of size 622 mm X 422 mm size complete all as specified and directed. (MAKE: PRAYAG, Cat No: 555 or equivalent model in POLYTUF / JEXON / SHAKTI / NILKAMAL )

S & F 200 mm long aluminium anodised barrel tower bolt of extrued section complete all as specified and directed.

S & F 200 mm long aluminium anodised barrel tower bolt of extrued section as in repairs complete all as specified and directed.

-ditto- but 150 mm long -ditto-.

S&F 250 mm long satinless decorative type sliding door bolt with hasp staple (bolt type) and fixing clip of shut cast or extruded section and fixing bolts and sliding bolts of extruded section as. Fixed as in repair complete all as specified and directed.

S&F 300 mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clip of shut cast or extruded section and fixing bolts and sliding bolts of extruded section as cast aluminium alloy complete all as specified and directed.

S&F 100 mm long butt hinges MS medium weight cold rolled complete all as specified and directed.

-ditto- but 75 mm long -ditto-.

S&F 150 mm extruded aluminium alloy handle fabricated type anodised complete all as specified and directed.

S&F in repair classic Cylindrical lock made of brass (Make: GODREJ, Cat No:3791 or equivalent in other makes specified in tender)

Supply and fix pressure booster pump with 1 HP 50-60 HZ, Voltage 220V, single phase, discharge capacity 0-6 m3/hr, 25 mm dia delivery pipe (of length 5.00 meter ) pressure switch of dynafoss, pressure dial gauge (ranging from 0 to 100 lbs per square inches) and testing on completion as in repair complete all as specified and as directed by Engineer-in-Charge. (Make: Crompton Greaves, Model No - 10 Minimarket I-025 or equivalent model in KSB / KIRLOSKAR)

M&L for 20 mm thick italian marble (of any type) work (table rubbed and polished) for Flooring, laid over and incl 20mm thick screed bed in cement mortar (1:3) and fixed with 5 mm thick spacers and gap to be filled by epoxy dazzling grout (with includes 2 component resin and hardner mixed in ratio 1:4 and dazzel per 200 gms for 1 kg grout mixture pointing with match with shade of Marble) complete all as specified and directed.

S&F 5.5mm thick looking mirror of size 450mmx600mm over AC bulding board or commercial ply wood and fixed with PVC/wooden plugs with CP brass screws and cup washer including taking down old one complete all as specified and directed.

S&F in repair solid seat and cover, white, for pedestal pattern water closet complete all as specified and directed.

-ditto- but coloured seat cover for pedestal pattern water closet

S&F in repair Solar control film 50 micron reflective type sticked to glass panes as per manufacturers instructions all as specified and as directed.

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames or stone concrete or brick surrounds,glazed with putty or fixed with beads.

S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S & F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair double action floor door spring hydraulically regulated made up of minimum alloy steel foundation box main body with stainless steel covergovering pirot made of brass other part of MS heavy duty and fixed as directed by the Engr-in-charge.

M&l for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L applying one coat of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint including preparation of old painted surface complete all as specified and directed.

M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint, complete all as specified and as directed.

S&F in repair vitreous china floor mounted coupled closet (Pedestal pattern) coloured including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC coloured seat cover and connecting fittings including taking down existing water closet complete all as specified and directed. (Make : PARRYWARE, Model : Cascade NXT / CERA, Model : CLAIR / HINDWARE, Model: CONSTELLATION or equivalent model in JAQUAR)

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

M&L Cement Concrete, Type B-O, 1:2:4 (12.50 mm graded stone aggregate) 40 mm thick as in roof padding mixed with water proofing compound and the concrete surfaces is to be finished even and fair without using extra cement complete all as specified and as directed. (Note : WPC shall be measured and paid separately under relevant item)

Stripping of old tarfelt/water proofing membrane including layer of plaster of any description carefully from the roof surface (without damage of roof) and removing from site as directed including roughening surface of old concrete roofing by picking, sweeping, cleaning and washing down with the water to remove dust as directed.

M&L Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications and Manufacturer's instructions, complete all as specified and as directed :- (a) Rendering 10mm thick in Cement Mortar 1:4, mixed with water proofing compund @ 3% by weight of cement, finished even and smooth and cured for 07 days by Ponding of water over Roof. (b) Preparing fully dried plastered surface as per IS:3067-1966, for further treatment. (c) Applying Bitumen Primer conforming to IS-3384-1986 over the Cleaned Plastered Surface @ 0.3 Litre per Sqm. (d) Applying a layer of APP based Polymeric Membrance; 3.0mm thick (minimum) weighing 3.50 Kilogram per Square Metre (reinforced) with Polyster Non Woven Fabric weighing not less than 160 Grams per Square Metre by Torch application. The overlaps shall be minimum 100mm on the Transverse direction and 75mm on Longitudinal direction. (e) Applying one coat of Aluminium Paint @ 0.10 Litre per Sqm over APP based Polymeric Membrane.

Supply only water proofing compound

S&F in repair Syphone for vitreous china flushing cistern of cuopled type water closet complete all as per specified and as directed.

S&F 45mm thick precast cement concrete Type B-0 (1:2:4) (using 12.5 mm graded crushed stone aggregate) louvers and jallies including all moulding, but excluding frame set in cement morter 1:4 as in repair, complete all as specified and as directed.

M&L for brick work with sub class `B’ bricks (fly ash), straight on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for use and waste for form work to sides and soffits of floor or roof beams , beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams for rough finished surfaces of concrete flat complete all as specified and directed

M & L for RCC type B1 1:2:4 (nominal mix) ( 20mm grade aggregate ) as in beams, cantilevers, bressummers , lintels over 1.5 mtr span complete all as specified and as directed.

M&L Pre-cast Reinforced Cement Concrete type B1(1:2:4) using 20 mm graded crushed stone aggregate) by volumetric mix as in Cover Slab of drain, Man Holes, Septic Tanks, etc., set in Cement Mortar 1:4 including necessary forms, moulds, etc., complete all as specified and as directed.

M&L TMT Bars 10 mm dia and over, cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.

M&L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders cut to length , bent to shape required as in reinforcement and binding with MS wire ( annealed ) not less than 0.90 mm dia complete all as specified and directed .

Dismantling AC corrugated roof sheets as in roof coverings including AC ridge complete all as specified and as directed.

S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.

All as per Item No. 105 above but 0.50 mm thick coloured plain galvalume sheet as in ridge/valley gutter of roof.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section ,including taking out embedded portion and making good disturbed ground post embedded in concrete, complete all as specified and as directed.

Dismantling of fencing, wire mesh any type complete all as specified and as directed.

Excavating in post hole (or similar hole) each nexc 0.5 cum getting out, returing,filling in and raming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 M and making good surface in soft and loose soil complete all as specified and directed.

M&L PCC 1:3:6 type C2 (Using 40 mm graded aggregate) in Foundation, filling and mass concrete complete all as specified and directed.

S & F ornamental MS framed work such as grills, gate, gratings etc with end of bars shouldered and revets welded etc framed guard bars barrel iron door ladder framed balusters walk ways,railing, conforming to Fe-290, Gde-E-165,including, complete all as specified and as directed.

S & F MS angle, flats,etc independently fixed without connecting plates etc but ordinary length conforming to FE-410-W(Gde-E-250) quality A as in fencing posts including drilling holes for nuts and bolts and similar work complete all as specified and as directed.

Fixing only RCC post or angle iron post (obtained from item No 108).

M&L Mild Steel Screw Bolts (machine made) 5mm to 10mm diameter of neck and length of bolt exc 5 Cm and not exc. 10 Cm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified and as directed.

S & F MS 10 mm dia round bar and fixed independently to angle iron for chain link fencing cut to length,bend to shape required, complete all as specified and as directed

Supply and fixing in repairs galvanized 2 strand steel barbed wire fencing conforming to IS : 278, with 2.24 mm dia. barb wire conforming to IS : 280 with zinc coating as per IS : 4826, barbed with 2 mm dia. barbs at 75 mm spacing and straining and fixing to any type of standard rails/RCC fencing posts straining bolts, including securing or tying at crossing with and fixing of galvanized mild steel wire, staples or steel pins etc. incl taking down existing fencing complete all as specified and directed. (Note: - Each line of wire will be measured)

S&F 3mm dia PVC coated galvanised mild steel chain link fencing of mesh size 75x75mm fixed with straining bolts including line wire any mesh size and type to any type of standards, rails, straining bolts etc.including provision of binding wire, complete all as specified and as directed. NOTE: MS post, MS round bars, flat iron, nuts & bolts shall be measured and paid separately.

Refixing of old serviceable chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed. NOTE: MS post, MS round bars, flat iron, nuts & bolts shall be measured and paid separately.

Supply only chain link fencing made out of 3.15 mm dia galvanised iron wire, of mesh size 75 mm x 75 mm, made upto into mattress or cages, complete all as specified and as directed. NOTE: Weight of chain link fence shall be verified through a BOO.

Straining and fixing only chain link fencing to MS Posts including provision of 10 mm dia MS bar as line wire welded to fencing post and MS flat iron, complete all as specified and as directed. NOTE: MS post, MS round bars, flat iron, nuts & bolts shall be measured and paid separately.

Supply and fixing in repairs concertina coil (reinforced punched barbed tape single layer) for fencing work incl taking down existing coils complete all as per following specifications :- (i) Diameter of concertina coil - 600 mm dia (ii) Number of turns in concertina - 50 to 53 turns (iii) Weight of each coil - 9.5 to 10 KG (iv) Coverage per coil - 6 m (v) Central core wire - made from high tensile spring steel core wire conforming to IS-4454 duly hot dipped galvanised (conforming to IS-2629) with diameter 2.59 mm + 0.05 mm, UTS 145-160 kg/sqmm, zinc coating 250-300 grams/sqm (vi) Strip - Electro galvanised steel strip 0.5 mm + 0.02 mm thick, width 19 mm (before wrapping on central core wire) conforming to IS-1573, zinc coating - 120 gram/sqm and bituminised dipped, width of barbs 11.5 mm, pitch of barbs 25.4 mm+ 0.2 mm (vii) Clips - AISI 304-1.5 mm thick 'C' & 'U' clips. 'C' special type for fixing coil and RBT wire, 'U' clips special type for joining one coil to another coil and RBT wire to RBT wire joining. (viii) No. of clips - 125 for each coil (ix) Handle and spikes to be provided as required (NOTE : 1. The concertina coil shall be given additional primer treatment of epoxy/polyurethane and final paint top coat of caufiled green shade (BSL 139) by hot dipping process. 2. Running length of the wall shall be measured for payment purpose).

M&L for 75 mm thick PCC 1:3:6 type C-2, 40mm graded aggregate, as in floor/sub-base, finished even and rough complete all as specified and as directed.

M&L for 100mm thick PCC 1:2:4 type B2, 40mm graded aggregate, as in floor/hard standing, finished even and smooth without using extra cement complete all as specified

M&L for providing PCC (1:3:6) type C-2 as in surface channels and drains including necessary from work complete all as specified and as directed.

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed

Add or deduct for 25mm girth or part there of over or under 30cm girth in cement concrete, using extra cement, including forms, mould, mitred/stopped ends etc. complete all as specified and directed

M&L Plain Cement Concrete 1:2:4, type B-1(20mm graded crushed stone aggregate) as in roof, kerbs or mud stops, round and chamfered on edge, including providing necessary form work complete all as specified and as directed.

M&L for reinforced concrete hume pipe class NP-2 laid & jointed complete with collar bore of pipe 450mm complete all as specified and as directed.

M&L for concrete bed to drain pipes incl packing under and haunching against the sides of pipe after they and laid tested in cement concrete 1:4:8 type D-2 (bore of pipe 450mm) complete all as specified and as directed.

Taking down cement or cement or cement lime plaster on brick or stone walls, etc. including raking out joints, haking for key, scrubbing down with water, etc.

M&L 5 mm thick rendering in cement mortar (1:3) to brick or concrete celling surfaces, finished even and smooth without using extra cement all as specified and as directed by the Engineer-in-Charge.

M&L 15 mm thick rendering in cement mortar (1:6) to brick or concrete wall surfaces, finished even and smooth without using extra cement all as specified and as directed by the Engineer-in-Charge.

M&L 15 mm thick rendering in cement mortar (1:4) to brick or concrete wall surfaces, finished even and smooth without using extra cement all as specified and as directed by the Engineer-in-Charge.

Material and labour for applying two coats of acrylic distemper over a coat of primer on newly plastered surfaces of walls including necessary preparation of surface complete all as specified and directed.

Material and labour for applying two coat of acrylic distemper to newly surfaces of ceiling over a coat of primer including preparation of surfaces complete all as specified and directed.

Material and labour preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

S&F in repair precast reinforced cement concrete RCPC drain cover 100 mm thick of size 900mm x 600 mm as in drain cover with capcity 3MT incl removing of existing drain cover complete all as specified and as directed.

S&F in repair precast reinforced cement concrete RCPC drain cover 100 mm thick of size 600mm x 450 mm as in drain cover with capcity 3MT incl removing of existing drain cover complete all as specified and as directed.

Supply and fixing 20mm thick pre-polished decorative cement concrete tiles of size 300mmx300mm, as in flooring, laid over & incl 20mm thick backing layer of cement mortar (1:6) set and jointed in neat cement slurry and pointed in white cement mixed with admixture pigment to match the shade, complete all as specified and as directed.

M&L 25 mm thick pre polished coloured chequred tiles of size 400X400 jointed and pointed in neat cement slurry with white or coloured to match the shade of tiles, laid over and including 20 mm thick screed bed in cement mortar 1:6 completed all as specified and directed.

S&F 15mm thick pre-polished decorative cement concrete tree guard tiles of approved size, design and colour laid on vertical surfaces over & including 15mm thick backing layer in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white cement mixed with admixture of pigment to match the shade complete all as specified and as directed.

Taking out of precast interlocking paver tiles, any thickness and stacking aside for reuse or removal from site complate all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS:15658-2006 of 60 mm thickness M-35 Grade with grey cement and pavement complete all as specified and as directed.

M&L Sand filling under floors under paver block including watering and consolidation complete all as specified and as directed

Relaying paver block in patches, preparing beds and laying or setting, jointing old paver blocks complete all as specified and as directed. (NOTE: Sand cushioning, if required shall be measured and paid seperately)

Material and labour for grinding/polishing and cutting to existing stone floor of any description (such as kota stone, marble stone, terrazo, granite and similar surfaces etc) cleaning with water and applying zinc oxide powder complete all as specified and as directed.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) with joints to match complete all as specified and as directed.

S&F in repairs Chromium plated brass Pillar tap, fancy type. with areator, fixed to wash hand basin, complete all as specified and directed. (Make : Ess Ess, Cat No: C-201B / JAQUAR, Cat No: CON-021KN/ PARRYWARE, Cat No: G1402A1 / PRAYAG, Cat No: 9204)

ARJUN DAS VALECHA

PINKY CO

SUDHA ENTERPRISES

SOMANI BUILDERS

NUPUR CONSTRUCTION

SKY TONE

Hindustan Traders

Bidder Name

Hindustan Traders