NIET 32 of 2025-26 Sl no. 3 Development of Civil and Electrical Infrastructures of Sainthia Industrial Park (Phase-I), in the district Birbhum.

TOTAL

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Earth work in excavation of trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

(a) Depth of excavation not exceeding 1,500 mm.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)

(a) With earth obtained from excavation of foundation.

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Pakur Variety

Hire and labour charges for shuttering with centering and necessary staging up to 4 m using approved stout props and thick hardwood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works.

(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.

A) For works in foundation, basement and upto roof of ground floor/upto 4 m.

II. Other than SAIL/ TATA/RINL

250 mm thick Brick work with Fly Ash Bricks(250mmx125mmx75mm) as per IS 12894:2002 in cement mortar (1:6)

(a) In foundation and plinth

100 mm. thick brick work with Fly Ash Bricks set in cement sand mortar (1:4) including raking out joints, curing, scaffolding etc. complete in all respect.

Labour for Chipping of concrete surface before taking up Plastering work.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]

With 1:6 cement mortar. 20 mm thick plaster

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.

In Ground Floor.

a) One Coat

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.

In Ground floor (Two Coat)

a) Normal Acrylic Emulsion

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc

I) For structural members of specified sections weighing less than 22.5 Kg./m

(b) Supplying, fitting galvanised 2 ply 12 gauge / 2 points line of barbed wire in fencing (holes already made in the body of the post) or fixed by staples tightening and fixing the wires in taut condition with straining bolts including the cost of cutting and of lapping joints in the wire as necessary but excluding the cost of galvanised staples,straining bolt and binding wire as necessary 2 ply 12 gauge/ 2 points.

Labour for fitting line of wire to posts, tightening by straining bolts and fixing the wire ( in taut condition) to the post with staples (including the cost of cutting and lapping joints in the wire, as necessary and including the cost of staples and straining bolts and also the labour for fixing the staples but excluding the cost of straining bolts)

(d) Barbed wire

Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina fencing on wall top using concertina coils stretched to approx.6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as 'C' clips, R.B.T clips etc.)

Boundary Wall (Ph-II)

Earth work in excavation of trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

(a) Depth of excavation not exceeding 1,500 mm.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)

(a) With earth obtained from excavation of foundation.

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Pakur Variety

Hire and labour charges for shuttering with centering and necessary staging up to 4 m using approved stout props and thick hardwood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works.

(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.

A) For works in foundation, basement and upto roof of ground floor/upto 4 m.

II. Other than SAIL/ TATA/RINL

250 mm thick Brick work with Fly Ash Bricks(250mmx125mmx75mm) as per IS 12894:2002 in cement mortar (1:6)

(a) In foundation and plinth

100 mm. thick brick work with Fly Ash Bricks set in cement sand mortar (1:4) including raking out joints, curing, scaffolding etc. complete in all respect.

Labour for Chipping of concrete surface before taking up Plastering work.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]

With 1:6 cement mortar. 20 mm thick plaster

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.

In Ground Floor.

a) One Coat

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.

In Ground floor (Two Coat)

a) Normal Acrylic Emulsion

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc

I) For structural members of specified sections weighing less than 22.5 Kg./m

(b) Supplying, fitting galvanised 2 ply 12 gauge / 2 points line of barbed wire in fencing (holes already made in the body of the post) or fixed by staples tightening and fixing the wires in taut condition with straining bolts including the cost of cutting and of lapping joints in the wire as necessary but excluding the cost of galvanised staples,straining bolt and binding wire as necessary 2 ply 12 gauge/ 2 points.

Labour for fitting line of wire to posts, tightening by straining bolts and fixing the wire ( in taut condition) to the post with staples (including the cost of cutting and lapping joints in the wire, as necessary and including the cost of staples and straining bolts and also the labour for fixing the staples but excluding the cost of straining bolts)

(d) Barbed wire

Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina fencing on wall top using concertina coils stretched to approx.6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as 'C' clips, R.B.T clips etc.)

Gate (3 nos.)

Earth work in excavation of trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

(a) Depth of excavation not exceeding 1,500 mm.

(b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)

(a) With earth obtained from excavation of foundation.

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Pakur Variety

Hire and labour charges for shuttering with centering and necessary staging up to 4 m using approved stout props and thick hardwood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works.

(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.

A) For works in foundation, basement and upto roof of ground floor/upto 4 m.

II. Other than SAIL/ TATA/RINL

Labour for Chipping of concrete surface before taking up Plastering work.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]

With 1:6 cement mortar. 20 mm thick plaster

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.

In Ground Floor.

a) One Coat

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.

In Ground floor (Two Coat)

a) Normal Acrylic Emulsion

M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.

In ground floor.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :

(b) On steel or other metal surface :

With other than hi-gloss of approved quality-

iv) Two coats (with any shade except white)

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete.

a) Span up to 12 Mtr

Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP)

(b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating)

Road Network

Box cutting or filling in Road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and where necessary.

(a) Depth up to 150 mm.

(b) For each additional Depth of 150mm and part thereof.

Earthwork in cutting to form road section in correct profile including removal of spoils not exceeding initial lead of 50m and initial lift of 1.5m

(i) In ordinary soil

Supplying, spreading and consolidating an uniform and homogeneous mixture of Stone Dust and Sand (mixed in proportion of 3 : 1 by volume and by any approved method as per direction of Engineer-in- Charge) to the required thickness in layers at 97% Proctor Density (not less than 1.7 gm/cc) with power roller to proper gradient and camber, including watering as necessary, lighting, guarding, barricading and making adequate earthen bundh where necessary to protect the edges and curing with water for 2 to 3 days, mending cracks and depressions by rolling where necessary complete as per Specification including all incidental charges of roller, cost of fuel & lubricants.

By Mix in Place Method : Construction of granular sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).

(i) Grading – I

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (The rate is inclusive of cost of all materials, labour, hire and usage charges of machinery and all incidental charges in this connection.)

A) Using Concrete Mixer

Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (The rate is inclusive of cost of all materials, labour, hire and usage charges of machinery and all incidental charges in this connection.)

A) Using Concrete Mixer

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).

(iii) Grading-II Aggregate (53 mm to 22.4 mm) Using Stone Screening Type B (11.2 mm)

A. Mechanical Means

80 mm thick interlocking designer concrete paver block M-40 grade for medium-traffic zone & utility cuts on arterial roads etc. as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent watering complete, including cost of sand but excluding cost of base, subbase course & subgrade preparation) complete as per direction of Engineer-in-Charge. [Note: Subgrade CBR shouldnot be less than 5]

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).

vii) 90 cm high octagon

Drainage Network

Earth work in excavation of trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

(a) Depth of excavation not exceeding 1,500 mm.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)

(a) With earth obtained from excavation of foundation.

Cement concrete with graded stone ballast (40 mm size excluding shuttering)

A) With Pakur Variety.(a) 1:3:6 proportion

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Supplying & laying Double Wall Corrugated (with external annular corrugation and smooth internal walls) High Density Polyethelene Pipes conforming to IS 16098 (Part-II):2013 having Stiffness Class of SN 8 with Ring Stiffness not less than 8.00 KN/Sqm. and Impact Resistance TIR value not more than 10% including necessary jointing materials for nonpressure underground Drainage, Sewerage & Cross drainage application

(i) 150mm internal dia.

(iv) 300mm internal dia.

(v) 400mm internal dia.

(vii) 600mm internal dia

(viii) 800mm internal dia

Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class brick work (1:4) in all sides over a layer of jhama brick soling and 150 mm thick cement concrete with stone chips (1:3:6) including necessary earth work, fitting and fixing approved type S.W. master trap, constructing masonry invert with cement concrete (1:1.5:3) with stone chips, plastering inside and outside (outside upto 300 mm below G.L.) with 20 mm thick cement plastering (1:4) and neat cement punning, including supplying, fitting and fixing one 560 mm. dia R.C.C. manhole cover of approved make with R.C.C. slab of 100 mm thick with cement concrete (1:1.5:3) with stone chips including necessary reinforcement (upto 1%) and shuttering and necessary corbelling brick work (1:4) so that the R.C.C. cover slab rests 150 mm above adjucent G.L., cement plaster (1:4) 10 mm thick on all external surfaces of the top slab as directed complete in all respect and removal of surplus earth with all costs of labour and materials

900 mm X 750 mm (inside) chamber including fitting and fixing one R.C.P.C. 25 MT load bearing capacity round manhole cover provided with two lifter hooks fitted with matching frame of size Cover: 680 mm X 90 mm, Frame: 800 mm X 165 mm, opening: 500mm Weight: 196 kg (approx)

A) With Pakur variety

1050 mm X 750 mm (inside) chamber including fitting and fixing one R.C.P.C. 25 MT load bearing capacity round manhole cover provided with two lifter hooks fitted with matching frame of size Cover: 680 mm X 90 mm, Frame: 800 mm X 165 mm, opening: 500mm Weight: 196 kg (approx)

A) With Pakur variety.

Constructing Inspection pit/ Gully pit inside measurement 600x 600xupto 600 depth, 250 mm thick 1st class brick work (1:4) in all sides , bottom of pit consisting of 100mm thick cement concrete 1:3:6 over a layer of jhama brick soling and 15mm plastering inside and outside (outside upto 200 mm below G.L.), 20 mm thick cement plastering (1:4) and neat cement punning at bottom of the pit,providing necessary invertt with with cement concrete 1:3:6 with stone chips, neat cement finishing to entire internal surfaces, top of pit covered with 200 mm thick reinforcement cement concrete (1:1.5:3) with stone chips including necessary reinforcement (upto 1.20%) and shuttering including 6 mm thickplaster 1:4 all external surfaces of the top slab as directed. (i) one R.C.P.C. 25 MT load bearing capacity gully pit cover of approved make supplied, fitted and fixed in the slab with necessary fittings including earth work in excavation in all sorts of soil, filling sides of pit with earth and removal of surplus earth after complete in all respect with all costs of labour and materials, with Pakur Variety (Other than SAIL, TATA, RINL)

Constructing Inspection pit inside measurement 600x 600xupto 600 depth, 250 mm thick 1st class brick work (1:4) in all sides , bottom of pit consisting of 100mm thick cement concrete 1:3:6 over a layer of jhama brick soling and 15mm plastering inside and outside (outside upto 200 mm below G.L.), 20 mm thick cement plastering (1:4) and neat cement punning at bottom of the pit,providing necessary invertt with with cement concrete 1:3:6 with stone chips, neat cement finishing to entire internal surfaces, top of pit covered with 200 mm thick reinforcement cement concrete (1:1.5:3) with stone chips including necessary reinforcement (upto 1.20%) and shuttering including 6 mm thickplaster 1:4 all external surfaces of the top slab as directed. (i) 600 mm X 600 mm (inside) chamber including fitting and fixing one R.C.P.C. 20 MT load bearing capacity round manhole cover provided with two lifter hooks fitted with matching frame of size Cover: 600 mm X 75 mm, Frame: 750 mm X 150 mm, opening: 525mm Weight: 170 kg (approx)

Earth work in excavation of trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

(a) Depth of excavation not exceeding 1,500 mm.

(b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring.

(c) Depth of excavation for additional depth beyond 3000 mm. upto 4000mm. excluding cost of shoring as necessary.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)

(a) With earth obtained from excavation of foundation.

Bailing or pumping out water from foundation trenches.

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Cement concrete with graded stone ballast (40 mm size excluding shuttering)

In ground floor

A) With Pakur Variety.(a) 1:3:6 proportion

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Pakur Variety

Hire and labour charges for shuttering with centering and necessary staging up to 4 m using approved stout props and thick hardwood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works

(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.

(a) For works in foundation and upto roof of ground floor/upto 4 m

II. Other than SAIL/ TATA/RINL

Labour for Chipping of concrete surface before taking up Plastering work.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface]

(i) With 1:6 cement mortar

(b) 20 mm thick plaster

(ii) With 1:4 cement mortar

(b) 15 mm thick plaster

(iii) With 1:3 cement mortar

(c) 10 mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

Supplying, fitting and fixing in position C.I. manhole/ pit cover with rim.

(b) Square

(iv) 600 mm X 600 mm X 50 kg (approx.)

Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface).

Repairing crack in wall by cement grouting (1 : 2) including widening the crack on the surface (into V section) cleaning and packing the same with cement mortar (1 : 2) and finishing off to match with adjacent surface. (Cement-69 Kg/100 m)

250 mm thick Brick work with Fly Ash Bricks(250mmx125mmx75mm) as per IS 12894:2002 in cement mortar (1:6)

(b) In superstructure, ground floor

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.

In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (iii) 35 mm. Thick

Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge.

(b) Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required)

Polymer concrete made with water resistant bonding agent of synthetic rubber emulsion as per manufacturer's specification excluding the cost of cement concrete (2.75 Kg / bag of cement) Note : Payment on volume of (1 : 1½ : 3) Concrete.

Providing and fixing of factory made uPVC Sliding window (White Colour) complete, (U value=1.9-1.3 W/m 2 K, flame resistant, self extinguishing, lead free) comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (±0.2 mm) duly reinforced with G.I. section 1.6 mm (±0.2 mm), wherever required. All corners of frame and sash will be fusion welded. After placing 5 mm Clear Annealed glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window frame will be fixed to the wall with 100mm long and 8mm dia. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-In-Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, Only manufacturer Waranty is aceptable)

a) 2 Track 2 Sash window frame of size 67 x 54 mm & Sash of size 64 x 47 mm both having wall thickness of 2.3 ± 0.2 mm

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.

i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Supplying, fitting & fixing fire resistant door frame conforming to IS:3614, tested and certified as per laboratory approved by Engineer in-charge, of section 143 x 57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 120 minutes fire rated door shutters. The frame is fitted with intumescent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with back plate bracket and anchor fastener of approved size and make. Rubber door silencers should be provided on striking jamb.

Supplying, fitting & fixing fire resistant Door leaf of 46 mm thick fully flush double skin glazed fire resistant door shutters with or without vision lite, of 120 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 18 SWG G.I. sheet (zinc coating not less than 120 gm/ m2) duly filled heat-resistant phenolic resin bonded insulation material (honeycomb craft) and fixing with necessary stainless steel ball bearing hinges of approved make. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturer recommendation with a beeding and screw from inside. The glass should be 6mm clear borosilicate fire rated glass of relevant rating. All door and frames shall be finished with polyurethene aliphatic grade paint of approved colour including applying a coat of approved brand fire resistant primer. The door leaf and frame shall have passed minimum 250 hours of salt spray test. Rate should include supply and installation complete as per direction of Engineer in- charge.

i) 2 hour Fire rated door single leaf of size (1200 mm x 2180 mm)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)

(a) One Coat

ii) Solvent based interior grade Acrylic Primer

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.

(a) One Coat

(i) Ground floor

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.

In Ground floor (Two Coat)

b) Premium 100% Acrylic Emulsion

(i) Ground floor

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. Including using of approved putty etc. on the surface, if necessary :

(b) On steel or other metal surface :

With other than hi-gloss of approved quality-

(iv) Two coats (with any shade except white)

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)

i) Standard Quality

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.

A) UPVC Pipes:

(ii) 110 mm. Dia.

Supplying fitting approved type ventilator in position after cutting holes in walls setting in cement mortar mending damages to wall and plaster and two coats of paint of approved brand of any shade. Payment of mending good damages of wall & plaster and painting to be made separately.

(b) R.C.C ventilator of 20 mm. Thick

(ii) Above 0.10 sq.m. Area

Supplying, fitting and fixing Fan Hook for ceiling with 1 metre long 16mm. dia rod complete including mending damages. Payment for damage and repair to be made separately.

Deep Tube Well

Labour for boaring through any type of soil for sinking tubewell of required dia. with top enlergement by rig boaring system (either by reserve circulation or by direct rotery method) including hire charges and labour for rig machine, tools and plants, staging force pumping set and making arrangement for water required for boaring etc. complete and lowering of pipes, strainers, blind pipes etc. complete.

b) For depth upto 250meter for 150mm dia. Tube well with top enlargement of 250mm dia.(upto 50 meter)

(i) First 50 meter

(ii) Next 50 metre

(iii) Next 50 metre

(iv) Rest 100 meter (Full Rate Payment)

(v) Rest 100 meter

Supplying, fibre glass reinforced Epoxy resin slotted of 1mm slot width in 6.1m length of approved make and as per direction of the Engineering-in-charge.

(a) 150 mm nominal dia

(i) 6.00 mm wall thickness

Supply of PVC pipes & fitting Schedule 80 (medium duty) conforming to ASTMD - 1785 and treaded to match with GI Pipes as per IS: 1239 (Part-I)

(A) PVC Pipes

Providing and fixing bell plug as require up to 250mm (internal) dia. ERWMS pipe including cost of meterials and labour complete.

Supplying, fitting and fixing heavy type bell mouth reducing socket.

(v) 200mm x 250mm

Supplying M.S. male/female adopter of approved make and brand for coupling of M.S. pipe and fibre glass strainers, as per direction of the Engineer-in-charge.

Supplying, fitting and fixing G.I. cap at top.

Proving 200mm center guide.

(i) With clamp

Supplying, fitting and fixing 300mm M.S. housing clamp of approved quality.

Geophysical investigation of the acuifer by electrologging system with all tools and plants as necessary including supply of necessary report.

Washing and developiung tube well with air compressor pump and engine for 8(eight) hours continous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants scaffolding as required.

Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all complete.

Collecting sample of water for bacteriological and chemical test for any depth at any time during execution of work includinghire and labour charges for tools and plants and sterillising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction.

Packing annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-in-charge including cost of all materials labour and equipment complete.

Packing annular space between the outside of the housing pipe and the bore with puddled clay balls of approved size as per direction of the Engineer-in-charge with cost of all materials and labour complete.

C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 mt per sq.cm. Spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to I.S. 780/71, painted black all over with asphalt base paint tested to 21kg (hydraulic pressure) per sq.cm., valve opening to anticlockwise direction, fiited and fixed complete. (ii) 80 mm

(iv) 150mm nominal dia.

EXTERNAL FOR SEWERAGE WATER SYSTEM

Supplying & laying Double Wall Corrugated (with external annular corrugation and smooth internal walls) High Density Polyethelene Pipes conforming to IS 16098 (Part-II):2013 having Stiffness Class of SN 8 with Ring Stiffness not less than 8.00 KN/Sqm. and Impact Resistance TIR value not more than 10% including necessary jointing materials for nonpressure underground Drainage, Sewerage & Cross drainage application.

(i) 150mm internal dia

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (B) Fittings xv) Vent Cowl

FITTINGS

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials

Inside size 60 x 60 cm and depth up to 75 cm

Supplying, fitting and fixing in position R.C.C. Manhole/ pit cover of approved make with rim of approved make (Heavy type)

(ii) 560 mm dia

Supplying, fitting and fixing yard gully with approved H.C.I. grating complete. (i) 225 mm X 150 mm with 230 mm gratings

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

EXTERNAL WATER SUPPLY

PIPING WORKS

Providing, laying, testing & commissioning of "B" class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tee, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required:

Sluice valve chamber with C.I. heavy cover with locking arrangement, (weight not less than 25 kg) (size of chamber 450 mm X 600 mm inside upto 900 mm depth) 250 mm thick cement brick walls (6:1), 150 mm thick cement concrete (6:3:1) bed with stone chips, 20 mm thick cement plaster (6:1) for inside wall and 15 mm thick cement plaster (4:1) for outer walls including rounding corners.

TOTAL EXTERNAL SANITARY SCHEDULE ITEMS

EXTERNAL WATER SUPPLY

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required:

a) 20 mm dia

PIPING WORKS

Providing, laying, testing & commissioning of "B" class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tee, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required:

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 45 x 45 cm and depth up to 60 cm

Land Development

Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary)

Earth work in excavation of trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work)

With carried earth arranged by the contractor within a radius exceeding 5 km. but not exceeding 10 km. including cost of carried earth.

Supplying (in bulk) at depots as directed boundary pillars 0.9m. high 27 cm. dia at base and 22.5m. dia at top with chamfered flat face on the top with sunk inscription thereon complete with top 45cm length finished smooth with cement rendering or thin plaster (1:3) but without any wash or painting.

b) Made of cement concrete 1:3:6 with stone chips or gravel

Fitting and fixing boundary pillar in correct position as directed with embedment of 60 cm. into the ground including making hole in ground and repacking the same thoroughly and carriage of the boundary pillar to site.

With carriage beyond 150 metre and upto 3.00 Km

White wash or colour wash to boundary pillar and painting as directed.

Dismantle work of existing building

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.

a) In ground floor including roof.

b) Extra rate for each addl. Floor over the rate of ground floor

i) First Floor

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.

In ground floor including roof.

(a) upto 150 mm. thick

Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.

(a) In ground floor including roof.

(b) Extra rate for each addl floor over the rate of ground floor.

Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m.

a) In ground floor including roof.

b) i) First Floor

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

SECURITY GUARD ROOM

Earth work in excavation of trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

(a) Depth of excavation not exceeding 1,500 mm.

(b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)

(a) With earth obtained from excavation of foundation.

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) (B) Do - by fine sand

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

40 mm. thick damp proof course with cement concrete (1:1.5:3) (with graded stone chips 20 mm nominal size) with water proofing compound of approved brand @ 0.2% weight of cement including cost of materials over two coats of non toxic acrylic polymer modified cementitious waterproofing slurry coat complete [cost of water proofing compound and non toxic paint to be paid seperately) for underground water retaining structures.[water proofing as per item no 9 and non toxic paint as per item no. 8 (b) of subhead C of Section 'C' ]

Cement concrete with graded stone ballast (40 mm size excluding shuttering)

In ground floor

A) With Pakur Variety.(a) 1:3:6 proportion

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Pakur Variety

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)

(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.

(a) For works in foundation and upto roof of ground floor/upto 4 m

II. Other than SAIL/ TATA/RINL

250 mm thick Brick work with Fly Ash Bricks(250mmx125mmx75mm) as per IS 12894:2002 in cement mortar (1:6)

(a) In foundation and plinth

250 mm thick Brick work with Fly Ash Bricks(250mmx125mmx75mm) as per IS 12894:2002 in cement mortar (1:6)

(b) In superstructure, ground floor

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.

In ground floor.

3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).

Using grey cement

(iii) 35 mm. Thick

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes.

Pakur Variety

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge.

Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required)

Polymer concrete made with water resistant bonding agent of synthetic rubber emulsion as per manufacturer's specification excluding the cost of cement concrete (2.75 Kg / bag of cement) Note : Payment on volume of (1 : 1½ : 3) Concrete.

Providing and fixing of factory made uPVC Sliding window (White Colour) complete, (U value=1.9-1.3 W/m 2 K, flame resistant, self extinguishing, lead free) comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (±0.2 mm) duly reinforced with G.I. section 1.6 mm (±0.2 mm), wherever required. All corners of frame and sash will be fusion welded. After placing 5 mm Clear Annealed glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window frame will be fixed to the wall with 100mm long and 8mm dia. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-In-Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, Only manufacturer Waranty is aceptable)

a) 2 Track 2 Sash window frame of size 67 x 54 mm & Sash of size 64 x 47 mm both having wall thickness of 2.3 ± 0.2 mm

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.

(ii) Grill weighing above 16 Kg./sq.mtr and above

Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-in charge.

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)

(a) 40mm X 6mm, 250mm Length

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:

(ix) 300mm long x 10mm dia. bolt.

Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.

(iii) 300mm x 16mm dia. bolt.

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:

(v) 100 x 63 x 3.2mm.

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:

(a) With continuous plate base (Hexagonal/ Round rod)

(vii) 150 mm grip x 12 mm dia rod.

Labour for Chipping of concrete surface before taking up Plastering work.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]

(i) With 1:6 cement mortar

(b) 20 mm thick plaster

(i) Ground floor

(ii) With 1:4 cement mortar

(b) 15 mm thick plaster

(i) Ground floor

(iii) With 1:3 cement mortar

(c) 10 mm thick plaster

(i) Ground floor

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)

(a) One Coat

ii) Solvent based interior grade Acrylic Primer

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.

In Ground Floor:

(a) One Coat

(i) Ground floor

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.

In Ground floor (Two Coat)

b) Premium 100% Acrylic Emulsion

(i) Ground floor

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. Including using of approved putty etc. on the surface, if necessary :

(b) On steel or other metal surface :

With other than hi-gloss of approved quality-

(iv) Two coats (with any shade except white)

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)

i) Standard Quality

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.

A) UPVC Pipes:

(ii) 110 mm. Dia.

Construction of 500mm wide Plinth protection work around the external periphery of the building comprising earth work in excavation not exceeding 150 mm. In depth, single brick flat soling, 75mm thick PCC(1:3:6) with graded stone ballast ((Pakur variety (40 mm. size) finished smooth with neat cement punning in one operation. The finished top surface shall have a slope of 1 in 20.

Supplying fitting approved type ventilator in position after cutting holes in walls setting in cement mortar mending damages to wall and plaster and two coats of paint of approved brand of any shade. Payment of mending good damages of wall & plaster and painting to be made separately.

(b) R.C.C ventilator of 20 mm. Thick

(ii) Above 0.10 sq.m. Area

Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete.

Supplying, fitting and fixing Fan Hook for ceiling with 1 metre long 16mm. dia rod complete including mending damages. Payment for damage and repair to be made separately.

ADMINISTRATIVE BUILDING

Earth work in excavation of trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

(a) Depth of excavation not exceeding 1,500 mm.

(b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)

(a) With earth obtained from excavation of foundation.

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) (B) Do - by fine sand

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

40 mm. thick damp proof course with cement concrete (1:1.5:3) (with graded stone chips 20 mm nominal size) with water proofing compound of approved brand @ 0.2% weight of cement including cost of materials over two coats of non toxic acrylic polymer modified cementitious waterproofing slurry coat complete [cost of water proofing compound and non toxic paint to be paid seperately) for underground water retaining structures.[water proofing as per item no 9 and non toxic paint as per item no. 8 (b) of subhead C of Section 'C' ]

Pre-Constructional Anti-termite measures:

(c) Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing Imidacloprid emulsifiable concentrates (105ml in 50 litres) with water at the rate of 5 Litres per sq.m. Of the surface before sand bed or sub-grade is laid. Hole upto 50mm to 75 mm deep at 150 mm. centre to centre both ways shall be made with 12mm, diametre mild steel rod on the surfaces to facilate saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in 7.2.3. of code IS-6313 (part- II) 2013. (Mode of measurement will be plan area of plinth treated.)

(d) Treatment to the back filling of R.C.C. foundation with chemical emulsion by admixing Imidacloprid emulsifiable concrete (160ml in 75 litres) with water at the rate of 7.5 ltr. Per sq.m. Of the vertical surface of the substructure of each side of the foundation. The work shall be carried out as per specification as described in para 7.3.1 of code IS-6313 (part-II) 2013 (Mode of measurement will be per sq.m. of vertical area of foundation treated).

Post Constructional Measures :

(a) Anti-termite treatment to the outside of foundations with chemical emulsion by admixing Imidacloprid emulsifiable concentrates (62ml in 28.5litres) with including cutting shallow channel by excavating soil along and close to the wall face ensuring uniform dispersal of the chemical emulsion to a depth of 300 mm. from the ground level by rodding with 12mm. di M.S. rod at 150mm. interval in the channel. 1.75 litres of chemical emulsion per metre length shall be used and a balance quantity of 0.5 litres of the chemical emulsion per running metre shall then be used to treat the back fill earth by directing the spray of the emulsion towards the wall surface. The entire work is to be carried out as per specification laid down in para 5.3.1.1 of code IS-6313 (Part-III) :2013.

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Cement concrete with graded stone ballast (40 mm size excluding shuttering)

In ground floor

A) With Pakur Variety.(a) 1:3:6 proportion

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Pakur Variety

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)

c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work

i) Foundation and Upto Roof of Ground Floor

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.

(a) For works in foundation and upto roof of ground floor/upto 4 m

II. Other than SAIL/ TATA/RINL

250 mm thick Brick work with Fly Ash Bricks(250mmx125mmx75mm) as per IS 12894:2002 in cement mortar (1:6)

(a) In foundation and plinth

250 mm thick Brick work with Fly Ash Bricks(250mmx125mmx75mm) as per IS 12894:2002 in cement mortar (1:6)

(b) In superstructure, ground floor

100 mm. thick brick work with Fly Ash Bricks set in cement sand mortar (1:4) including raking out joints, curing, scaffolding etc. complete in all respect.

Extra for using approved H.B netting in every third layer in 14.(i) of subhead A above in any floor

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.

Pakur Variety

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor)

(i) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.

(A) Deep Colour & White

18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.

(A) Floor

With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative

i) Ground Floor

(B) Wall

With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.

(a) Area of each tile upto 0.09 Sq.m

(i) Coloured decorative

i) Ground Floor

Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge.

(b) Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required)

Polymer concrete made with water resistant bonding agent of synthetic rubber emulsion as per manufacturer's specification excluding the cost of cement concrete (2.75 Kg / bag of cement) Note : Payment on volume of (1 : 1½ : 3) Concrete.

Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge.

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)

(a) 40mm X 6mm, 250mm Length

Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete.

Supplying Brass floor door stopper including fitting and fixing complete.

Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete.

(a) Heavy type (I.S.I. size 3)

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:

(ix) 300mm long x 10mm dia. bolt.

Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.

(iii) 300mm x 16mm dia. bolt.

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:

(v) 100 x 63 x 3.2mm.

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:

(a) With continuous plate base (Hexagonal/ Round rod)

(vii) 150 mm grip x 12 mm dia rod.

(a) Supplying, fitting fixing I.S.I. approved quality and brand hydraulic (oil check) floor door spring, heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as per direction of Engineer-incharge.

Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete.

PVC Door Shutter-30 mm thick:

Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular 'L' shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliancesi/c carriage of all materials taxes and all other incidental charges complete.

a) In ground floor,

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.

i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx

Labour for Chipping of concrete surface before taking up Plastering work.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]

(i) With 1:6 cement mortar

(b) 20 mm thick plaster

(i) Ground floor

(ii) With 1:4 cement mortar

(b) 15 mm thick plaster

(i) Ground floor

(iii) With 1:3 cement mortar

(c) 10 mm thick plaster

(i) Ground floor

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)

(a) One Coat

ii) Solvent based interior grade Acrylic Primer

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.

(a) One Coat

(i) Ground floor

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.

In Ground floor (Two Coat)

b) Premium 100% Acrylic Emulsion

(i) Ground floor

Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)

i) Standard Quality

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.

A) UPVC Pipes:

(ii) 110 mm. Dia.

Providing and fixing of factory made uPVC Sliding window (White Colour) complete, (U value=1.9-1.3 W/m 2 K, flame resistant, self extinguishing, lead free) comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (±0.2 mm) duly reinforced with G.I. section 1.6 mm (±0.2 mm), wherever required. All corners of frame and sash will be fusion welded. After placing 5 mm Clear Annealed glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window frame will be fixed to the wall with 100mm long and 8mm dia. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-In-Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, Only manufacturer Waranty is aceptable)

a) 2 Track 2 Sash window frame of size 67 x 54 mm & Sash of size 64 x 47 mm both having wall thickness of 2.3 ± 0.2 mm

Providing and fixing of factory made uPVC Louver window (White Colour) (U value=1.9-1.3 W/m2K, flame resistant, self extinguishing, lead free) comprising of uPVC multi-chambered with wall thickness of 2.3mm (±0.2 mm ) duly reinforced with 1.6 mm (±0.2 mm) thick G. I. Section made from roll forming process of required length (shape & size according to uPVC profile). Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. Both vertical sides of the frame, adjustable louver mechanism having one lever shall be fitted with the provision of 4 mm glass. Window frame will be fixed to the wall with 100mm long and 8mm dia for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-in-Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, Only manufacturer Waranty is aceptable

a) Louver Window with provision of Exhaust Fan frame of size 67 x 62 mm & Sash / Mullion of size 67 x 78 mm both having wall thickness of 2.3 ± 0.2 mm

Construction of 500mm wide Plinth protection work around the external periphery of the building comprising earth work in excavation not exceeding 150 mm. In depth, single brick flat soling, 75mm thick PCC(1:3:6) with graded stone ballast (Pakur variety (40 mm. size) finished smooth with neat cement punning in one operation. The finished top surface shall have a slope of 1 in 20.

Supplying fitting approved type ventilator in position after cutting holes in walls setting in cement mortar mending damages to wall and plaster and two coats of paint of approved brand of any shade. Payment of mending good damages of wall & plaster and painting to be made separately.

(b) R.C.C ventilator of 20 mm. Thick

(ii) Above 0.10 sq.m. Area

Bailing or pumping out water from foundation trenches.

Supplying, fitting and fixing Fan Hook for ceiling with 1 metre long 16mm. dia rod complete including mending damages. Payment for damage and repair to be made separately.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :

(b) On steel or other metal surface :

With super gloss (hi-gloss) -

(ii) Two coats (white in shade)

Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete.

Internal Plumbing Works

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials. (A) Above ground (ii) 110 mm dia.

Providing and fixing, jointing, testing and commissioning of uPVC pipe schedule 40 (for waste drainage of wash basin and kitchen sink etc.) cut to required lengths including all necessary fittings and specials such as bends, junctions offsets, access pieces (plain or door). Fixing at wall / ceiling level supported by G.I. clamps, hangers etc. duly paint epoxy coated.

PIPING WORKS

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.

(ii) CPVC Pipes Class-1, SDR-11 20mm

(iv) CPVC Pipes Class-1, SDR-11 32mm

(v) CPVC Pipes Class-1, SDR-11 40mm

WATER CLOSET

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc Make: Kohler/Toto/Parryware

(a) With 'P' trap

Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings. White

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C (iv) Bestolite (solid type) white Make: Jaquar /Parko/Kingston

Supplying, fitting and fixing bib cock or stop cock.

(d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand)

(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).

(f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).

xvii) W.C. Connector (150 mm long) 125 X 110(W/WC Ring) 75 mm Make: Prince/Supreme/Mc Alpine

xx) 125/110 P Trap with W.C. Ring 75 mm Make: Prince/Supreme/Mc Alpine

Supplying, fitting and fixing porcelain toilet paper holder of approved make with wooden spindle as necessary. (i) Roll type size 250 mm X 125 mm Make: Kohler/Toto/Parryware

(e) Chromium plated double coat Hook(Equivalent to Code No. 35761 & Model - KUBIX of Jaquar or similar).

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (v) 900 mm long Make: Dunlop/Flexionics/Kanwal Industrial Corporation

URINAL

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete (i) 635 mm X 395 mm X 420 mm

Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete (ii) C. P. Flush Pipe

Supplying, fitting and fixing urinal flush pipe fittings of approved brand. (b) C.P. urinal flush pipe fittings range of two

Supplying, fitting and fixing 18 mm thick marble partition slab with chawk doongri marbel square cut, both sides polished with two front corners rounded and edges polished.

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (v) 900 mm long For Wash Basin & Urinal

Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality) (a) Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange (Equivalent to Code No. 545 & Model - Tropical / Sumthing Special of ESSCO or similar brand). For Wash Basin & Urinal

PTMT - Waste Coupling 31/32 mm For Wash Basin & Urinal

Supplying, fitting and fixing bib cock or stop cock. (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand) For Wash Basin & Urinal

Supplying, fitting and fixing push cock of heavy quality and of approved make and brand. (a) Cast iron (ii) 20 mm

Wash basin vitreous china of approved make (without fittings) supplied, fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets..

(iii) 630 mm X 450 mm size

PTMT - Waste Coupling 31/32 mm

Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality) (a) Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange (Equivalent to Code No. 545 & Model - Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting and fixing bib cock or stop cock. (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand)

Supplying, fitting and fixing pillar cock of approved make. c) CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent).

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (v) 900 mm long

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (iv) 1050 mm long

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (ii) 600 mm X 450 mm

Supplying, fitting and fixing liquid soap container. (a) Cromium plated.

Supplying, fitting and fixing soap holder. (a) PTMT (Prayag or equivalent)

Supplying, fitting and fixing towel rail with two brackets (a) C.P. over brass (i) 25 mm dia. and 450 mm long

Supplying, fitting and fixing Waste fittings complete. (a) C.P. over brass (ii) 32 mm

Supplying, fitting and fixing C.I. bracket including two coats of painting.

(a) Wash basin, Dental spitton

Best quality sink in mosaic in silver grey colourwith C.P. waste and other fittings, rubber plug and chain, C.I. heavy brackets with two coats of approved paint.

(ii) 600 mm X 450 mm X 250 mm

PTMT - Waste Coupling 31/32 mm

Supplying, fitting and fixing complete Bottle waste trap (Heavy Quality) (a) Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange (Equivalent to Code No. 545 & Model - Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting and fixing bib cock or stop cock. (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand)

Supplying, fitting and fixing C.P. Wall Flange

Supplying, fitting and fixing pillar cock of approved make.

c) CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent).

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (v) 900 mm long

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (iv) 1050 mm long

Supplying, fitting and fixing Waste fittings complete. (a) C.P. over brass (iii) 50 mm

Supplying, fitting and fixing C.I. bracket including two coats of painting.

(a) Wash basin, Dental spitton

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

15mm nominal bore

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Supplying, fitting and fixing bib cock or stop cock. (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand)

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992

xxi)110 X 110 P Trap

xxxiv) Multi Floor Trap without Top tile & Strainer

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

40mm Dia

50mm Dia

(A) Labour for fitting and fixing G.I. pipes above ground (exposed) in structures with holder bat clamps including cost of jointing materials, holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting will be paid seperately)(Domestic Water Feed Line)

(iii) 25 mm dia

Labour for fitting and fixing G.I. pipes for under ground work including cost of jointing materials, cutting pipes,making threads etc. complete in all respect including cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting to G.I. pipes and specials with bituminous paint. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting to be paid seperately.) (Domestic Water Feed Line)

(iii) 25 mm dia

Providing and fixing, jointing, testing and commissioning of uPVC pipe schedule 40 (for waste drainage of wash basin and kitchen sink etc.) cut to required lengths including all necessary fittings and specials such as bends, junctions offsets, access pieces (plain or door). Fixing at wall / ceiling level supported by G.I. clamps, hangers etc. duly paint epoxy coated.

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

25mm Dia

Providing and fixing medium duty S.S. Floor grating with frame of approved design brand including setting in floor with cement motor to match with floor finish as per architect requirement including cutting and making good floor or wall wherever required.

a) 125mm dia

Providing, Fixing, testing and commissioning of Concealed type Stop valve 20mm dia including nuts, bolts and washers of approved brand including cutting and making good the walls wherever required.

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer

500 litre capacity

Side Wall grating

PHE Pump

Providing, installation, and testing and commissioning of Non-return valve od following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nut, washers etc.as required

a) 80 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

a) 80 mm dia

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I)

Flange

a) 25 mm dia

e) 80 mm dia

Providing and fixing 25 mm dia gun metal fitting for water level indicator gauge with isolation valve at top and bottom, heavy gauge transparent polyethylene tube of approx. 5 m length with co lour indicator float clamped to teak board 100 mm wide x 20 mm.

Providing & fixing double flanged flexicon rubber expansion (bellows) joint with unit control of standard length as per maufacturers specifications suitable for working pressure of 15Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required for suction and delivery of pumps.

a) 80 mm dia

Providing and fixing 600 x 600 mm dia heavy duty sfrc/rcpc man hole cover for Under Ground domestic and fire water tanks as directed by Engineering Incharge

Providing and fixing PVC Foot Rest for UGR

Electrical works

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC Average run 8 mtr

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V 16 A Piano key type switch(Brand approved by EIC) on GI Modular type switchboard having top cover plate and making necessary connections as required

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. Make: Crabtree(Athena), Havells (Coral), Legrand (Myrius), ABB (Tvisha)

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works Make: Crabtree(Athena), Havells (Coral), Legrand (Myrius), ABB (Tvisha) as appd by EIC

4 Module

6 Module

8 Module

12 Module

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 2 Module Make: Crabtree(Athena), Havells (Coral), Legrand (Myrius), ABB (Tvisha) as appd by EIC

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make]on wall, ceiling with saddles and other accessories as required and mending good damages to building works

20mm size

25mm size

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment 8 way Enclosure Legrand/ABB/Siemens/Schneider as appd by EIC

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size ofcopper wire and neutral link & provision for earthing attachment.

2+8 way Enclosure Legrand/ABB/Siemens/Schneider as appd by EIC

2+12 way Enclosure Legrand/ABB/Siemens/Schneider as appd by EIC

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

6-32 A SP Legrand/ABB/Siemens/Schneider as appd by EIC

6-32 A DP Legrand/ABB/Siemens/Schneider as appd by EIC

40 A FP Legrand/ABB/Siemens/Schneider as appd by EIC

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A Legrand/ABB/Siemens/Schneider as appd by EIC

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 30 cm (12")

Supply & Fixing louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long) Al. For 30 cm (12") Exhaust air fan

Supply, Delivery and installation of 9 Kg capacity with ISI marked Co2 type fire extinguisher squeeze grip type conforming to IS:15683:2006 made from seamless cylinder conforming to IS:7285 duly approved by Chief controller of explosive, Nagpur, fitted with ISI marked (as appd by EIC) controller of explosive, Nagpur, fittet with ISI marked controlled valve conforming to IS:3224, high pressure 1 mtr. long discharge hose and horn complete with initial gas charged mounted on trolley wheels.

Supply Delivery and installation of ISI marked (as appd by EIC) ABC Powder type fire extinguishers (stored pressure) HSN code-84241000 conforming to IS:15683 and complete in all respect as per direction of EIC Capacity - 6 kg

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

4 Core upto 35 sqmm

4 Core upto 16 sqmm

For 4 core 10 sqmm

2 Core upto 10 sqmm

3 Core upto 6 sqmm

4 Core upto 6 sqmm

upto 3core 10 sqmm

upto 4C x 16 sqmm

upto 35 sqmm

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

4 Core upto 35 sqmm

4 Core upto 16 sqmm

For 4 core 10 sqmm

2 Core upto 10 sqmm

3 Core upto 6 sqmm

4 Core upto 6 sqmm

3Core 10.0 sqmm

2 Core 6.0 sqmm

3Core 35.0 sqmm

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector,6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.

100x50x1.25mm (18SWG) With out angle iron support

150x50x1.25mm (18SWG) With out angle iron support

200x50x1.25mm (18SWG) With 25x25x3mm angle iron support

Supply & Fixing of perforated GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.

100x50x1.25mm (18SWG)

150x50x1.25mm (18SWG)

200x50x1.25mm (18SWG)

Excavation of soil for installation of Earth Electrode and filling & ramming

For Morrum Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments body to earth busbar incl. S & F 25 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc.

Supplying & Erection of big size feeder pillar box of Size B96 (1372 x 914 x 607 mm) made up of 3.15 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35x35x3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C.

a. Incoming

S&F 125A MCCB, Make: Legrand or equivalent

S&F of Indicating Lamp (R.Y,B)

S&F 3-ph-Digital Voltmeter (make-Legrand or equivalent cat no. 414978 or equivalent as approved)

S&F 3-ph-Digital Ammeter (make-Legrand or equivalent cat no. 414977 or equivalent as approved)

b. Bus Bars

Supply Fabrication and Installation of 200 Amps, 415 Volt, 50 HZ Copper bus bars 4 bar

c. Outgoing

S&F of 63 Amps TPN Main switch incl. S & F 3 nos. DIN type HRC fuse as per rating. Make: L&T or equivalent as approved

S&F of 32 Amps TPN Main switch incl. S & F 3 nos. DIN type HRC fuse as per rating. Make: L&T or equivalent as approved

S&F of 16 Amps DP Main switch incl. S & F 3 nos. DIN type HRC fuse as per rating. Make: Havells or equivalent as approved

S&F of 16A, 250 V Digital Time Switch with suitable arrangement (Make- Legrand, Cat No. 412657 or equivalent as approved)

Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. 4SWG

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Column 450x450 mm and base foundation 1200x1200 mm): Above 6.5 metre and upto 8.0 metre as per appd drawing of EIC

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required: 50 mm dia

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required: 80 mm dia

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required., Make: Polycab/Havells/ ABB/Finolex/KEI as appd by EIC. : 3 X 1.5 Sq. mm

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: TATA-Medium GI pipe

Supplying & Erection of big size feeder pillar box of Size B96 (1372 x 914 x 607 mm) made up of 3.15 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35x35x3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C.

a. Incoming

S&F 63 Amps TPN Main switch incl. S & F 3 nos. DIN type HRC fuse as per rating. Make: L&T

b. Bus Bars

Supply Fabrication and Installation of 200 Amps, 415 Volt, 50 HZ Copper bus bars 4 bar

c. Outgoing

S&F of 32 Amps TPN Main switch incl. S & F 3 nos. DIN type HRC fuse as per rating. Make: L&T

S&F of 16 Amps DP Main switch incl. S & F 3 nos. DIN type HRC fuse as per rating. Make: Havells

S&F of 16A, 250 V Digital Time Switch with suitable arrangement (Make- Legrand, Cat No. 412657 or equivalent as approved)

Supply & fixing GI (Hot Dip) strips 20 mm x 3 mm thick for horizontal run on the Parapet/Roof/ Wall with GI Saddles 1100 mm apart incl. mending good the damages to building works

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. (Average Run 6 mtr)

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. Make: Crabtree(Athena), Havells (Coral), Legrand (Myrius), ABB (Tvisha) as appd by EIC

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. 4 Module Make: Crabtree(Athena), Havells (Coral), Legrand (Myrius), ABB (Tvisha) as appd by EIC

S/F Bulk Head light fittings directly on wall ittings with IP-65 protection as per direction of EIC.(Make: similar to Philips / Wipro/panasonic as appd by EIC)

Distribution wiring in 2 x 2.5 sq mm + 1 x 1.5 sq mm sigle core stranded FR PVC insulated & un-sheethed copper wire (Make: Finolex/Polycab/Havells as appd by EIC) in 19 mm bore 3 mm polythene pipe concealed in wall as per direction of EIC. For room SPN DB to 15 A Power Plug.

Earthing with 50 mm (2" dia) galv GI pipe 3.64mm thickness x 3.04 m long and suitable size GI clamp continously welded around the earth electrode and earth lead of GI strip of size (19 mm x 3 mm, 4 mts long) after connecting them by 13 mm dia x 80 mm long GI bolt double nut. Double washers incl S/F 15 mm dia GI pipe protection (1 mtr long) to be filled with bitumen partly under the ground level an partly above ground level to an avg depth of 3.65 mtr below the ground level as below. a) by TATA-M GI pipe.

Supply and fixing sheet steel main switches on angle frame on wall 32 Amp, 220 V front handle DP with fuse on L & N (Make- L&T /Havells as appd by EIC).(FOR MCB DB)

Supply and fixing sheet steel main switches on angle frame on wall 32 Amp, 415 V front handle TPN with fuse on L & N (Make- L&T /Havells as appd by EIC). (SUB MERCIBLE PUMP)

Supply and fixing sheet steel main switches on angle frame on wall 125 Amp, 415 V front handle TPN with fuse on L & N (Make- L&T /Havells as appd by EIC). (MAIN I/C)

Supply and fixing sheet steel main switches on angle frame on wall 63 Amp, 415 V front handle TPN with fuse on L & N (Make- L&T /Havells as appd by EIC). (20 HP MONO BLOCK PUMP)

Bus-Bar Chambers : Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – (As per Drawing no. 470 of PWD Specification Book – May 1991) 4 bars: 415 V,200A -Dimension of Cu. Bars [85mm long] 4 x 20x10mm Dimension of Sheet Metal Box- 500x150mm.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire(Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 30 cm (12")

Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long)

Supply of G.I Flange with suitable arrangement & necessary nuts, bolts & washers.

Supply & fixing of C.I. clamp with necessary nuts, bolts, washers & lock nuts etc. for holding the column pipe.

WBSEDCL Service Connection Charge in co-ordination with the WBSEDCL and WBSIDCL (Please refer Cl 19 of NIET)

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Supply & Delivery of 12W LED circuler recessed/surface mounted lighting fixture comprises of CRCA housing and polycarbonate diffuser having constant current output driver having potential of energy saving upto 50% as compared to twin lamp channel & 5 KV surge protection and lumen output>=1200 Lumen, as per approved make. Make: Philips /Havells/Wipro as appd by EIC

Supply & Delivery 20W LED circuler recessed/surface mounted lighting fixture comprises of CRCA housing and polycarbonate diffuser having constant current output driver having potential of energy saving upto 50% as compared to twin lamp channel & 5 KV surge protection and lumen output>=2000 Lumen as per approved make. Make: Philips /Havells/Wipro as appd by EIC

Supply & Delivery 20W LED surface/suspended mounted Batten comprises of CRCA housing and polycarbonate diffuser having constant current output driver having potential of energy saving upto 50% as compared to twin lamp channel & 5 KV surge protection and lumen output>=2000 Lumen Make: Philips /Havells/Wipro as appd by EIC

Supply & Delivery 40W LED surface/suspended mounted Batten comprises of CRCA housing and polycarbonate diffuser having constant current output driver having potential of energy saving upto 50% as compared to twin lamp channel & 5 KV surge protection and lumen output>=4000 Lumen Make: Philips /Havells/Wipro as appd by EIC

Supply & Delivery A.C. Wall Bracket fan of 600 mm sweep heavy duty complete with all accessories similar to Make: Crompton ACVORTEX24WM/ Havells/ OrientAnchor as approved by EIC

Supply & Delivery 1200 mm, 3star rating fan ceiling fan complete with all accessories like down rod, canopy etc. but without regulator as per approve make. Make: Crompton: (Model -HS PLUS-3 STAR) / Havells/ OrientAnchor as approved by EIC

Supplying fresh air cum exhaust fan of heavy duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner (300 mm or 12” Power Flow Exh. Fan) (Make-Crompton EXHD300-4-1 ISI marked or equivalent make as approved by EIC) 30 cm (12")

Supply, Laying 4 core 35 sq mm XLPE Ar/Al cable in underground trench 460mm (1'-6") wide x 760mm (2'-6") average depth with brick protection on the top of the cable with 8(eight) nos. Brick per meter, incl. filling the space between the brick and cable and also the trench with shifted soil, levelling up and restoring surface duly rammed.(make: Gloster/KEI/Polycab/ as appd by EIC)

Supply & Laying of cable from 4 core 35 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

Supply & Laying of cable from 4 core 16 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting (make: Gloster/KEI/Polycab/ as appd by EIC)

Supply & Laying of cable from 2 core 10 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting (make: Gloster/KEI/Polycab/ as appd by EIC)

Supply and fixing of All In One Solar LED Street Light of 100W (Lumen output not less than 10500 lumens) on existing Steel Tubular Poles having following specifications:- Solar Panel: 1. Solar panel should be made from Monocrystalline cells. 2. The Solar Module Power shall be ≥ 100 Wp. 3. Cell efficiency should be≥21% . 4. Operation Mode: Hybrid 5. Module efficiency should be ≥17% . 6. Glass should be Borosilicate only . 7. Manufacturer should comply to IEC 61215, IEC 61730 & IEC 61701 standards.

Lighting Luminaries: 1. The Lumens Output of the Fitting shall be of Minimum 10500 Lumens. 2. LED should be of Osram/ Lumiled/Cree/Seoul/ Nichia/ Bridgelux 3. LED Type: High power SMD LED, Gen 5 4. LED Efficacy: 171lm/W 5. CRI should be >70 6. CCT should be 5700K±500K 7. System Efficacy ≥150 lm/W 8. Aluminium heat-sink to be used 9. LEDs shall have optical grade polycarbonate lens to provide streetlight distribution. LED optical lens should be mechanically fixed to MCPCB and should not be fixed by glue. Individual or cluster of LEDs should be provided with Optical Grade Polycarbonate lens with streetlight (Type II) optical distribution 10. The LED shall be compliant with LM80-08 standard. 11. Useful L70 life of 50000 Hrs with 70% lumen maintenance at 35 deg C ambient temperature. (Complete LM 80 test report for LED should be submitted) 12. Product should be IP 65 at component level.

Battery: 1. Battery pack should be of LiFePO4 type cells 2. Life of battery should be ≥2000 cycles @ 80% DoD 3. Battery backup: ≥10 hours in full power mode≥30 hours in saving mode (30% light output throughout) (Battery fully charged condition) 4. Battery size: 12.8V, 60Ah 5. Battery should have wide operating temperature range (0 to ≥45 degree celcious) to work in higher ambient 6. Cells used in battery pack should have BIS/IEC certification as per IS 16046/IEC 62133.BIS certificate to be provided for cell. 7. Battery BMS should have over temperature, over voltage, under voltage & short circuit protection 8. Battery pack should have a FR sheet packing with HS sleeve 9. Battery pack should have IP66 protection.

Electronics: 1. Should have MPPT algorithm for charging. 2. MPPT tracking efficiency: >98% 3. MPPT Conversion efficiency: >95% 4. LED driver efficiency: >90% 5. Reverse Polarity, Short circuit, LED open, LED short circuit, open circuit protection 6. Reverse current flow protection 7. Standby current consumption Should be <20mA 8. Should have indications for Charging, LVD, Status of system 9. Electronics should comply with IEC/BIS standards 10. Product should be IP 65 on component level 11. Wide operating temperature range: 0 to 55 degrees 12. MPPT, Driver & PIR sensor should be potted 13. Status indications to be provided for Charging, Battery full, Product status, Battery low, Over temperature.

Mechanical: 1. Housing material should be made up of Aluminium Extrusion/sheet 2. Manufacturer Logo to be embossed on housing 3. Metallic silver powder coating with thickness of ≥70 micron 4. ≥5mm thick, Hot dip galvanised & powder coated hardware for pole mounting 5. Robust pole mounting clamps to handle high wind pressure 6. All screws and nuts should be SS 304 grade 7. IP 67 -Soft switch for ON/OFF operation 8. Fixed 5-degree tilt to be provided to Solar panel for optimum charging.

Warranty: Warranty and maintenance assurance certificate for atleast 5 (Five) years. Make: Philips/Wipro/Bajaj or equivalent as approved by EIC

SITC of LED Flood Light having High lumens >135Lm/W & efficient light PF >0.95 source is used in a combination to deliver the maximum light on to the street/road/parking area/sport ground. This lights are designed for the lighting application of city Road lighting/ periphery lighting/ Prestigious heritage area outdoor lighting/urban landscape lighting etc., Die casted Aluminium Body with IK 07 toughened glass 99.9% purity, IP66 rated product should work at extreme conditions and wet environments. Power Input : AC 220-240V, 50 Hz, Light Source : LED, Wattage : 200W, LED should run with 10 -20% lower current by considering maximum efficiency, System Efficacy : ≥135 lm/W, IP rating : IP 65/66, IK rating : IK 07, CCT : ≥5700 K, CRI : ≥ 70, Driver : Integral, Constant Current : THD : ≤ 10 %, Power Factor : ≥ 0.90, Operating Frequency : 50 Hz, Surge : 4 kV & External up to 10kV, Operating temperature range : 0° C TO 50° C, Body : Die Casted Aluminium, Cable : 3 core 1.5sq mm, Control : ON/OFF, Mounting System : Bracket with holes for nut & bolting, Glass: Heat resistant toughened glass, Secondary lenses are used, Paint: Powder coated (Approved colour coat), Max. Dimensions: 407 x 317 x 250mm (+/- 2 to5%), Weight: 7.0Kg (+/-2 to5%) )Make: Philips /Havells/Wipro as appd by EIC)

Supply of delivery of 7 mtr high hot galvanised octagonal pole, continously tapered (bolt fixing type) in single section made out of 4mm thick sheet suitable for bracket having top dia 70 mm and bottom dia 130 mm, base plate size 200X200X12 mm with door and locking arrangement complete with minimum 1 mtr long MS/GI street light bracket, bakelite sheet,neutral link, suitable MCB or any other electrical accessory,suitable foundation bolts of diameter 20 mm,700mm apprx length, "J" type,4 pcs set. Make : Make:Philips/Wipro/Bajaj as approved by EIC

Supply Erection of 12.5 M high mast shaft in two sections suitable for wind speed as IS 875, with raising lowering system comprising, head frame, luminaries carriage suitable to install 6 nos luminaries in asymmetrical arrangement, double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial. (Wiring material from JB to individual luminaire & MCB in base compartment are not included and are a part of installation). Details as below, Top dia:150 mm, Bottom dia: 360 mm, No. of section: 2, Top section length/Thickness: 6250/3 mm, Bottom length/thickness: 6250/3 mm, Overlap: 500 mm, Base Plate: 520X25 mm, Door details: 250X1200 mm, Winch 300 kg, Motor: .75/1 HP incl. Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template. Details as below, Bolt PCD: 445 Dia: M-24 Length: 850 Basic Feeder Pillar (32 A/63 A) as per SLD and Single Dome LED Aviation Lamp Make: Bajaj / Transail / Volmont as approved by EIC

Foundation of high Mast (12.0 / 12.50 M) on RCC foundation with cement concrete considering actual SBC of soil, with the help of suitable modern engg. tools and Plants, wiring of luminaries with all wiring materials like PVC insulated flexible cable of suitable copper conductor core of 1.5 mm² lugs, up to 10 nos. 6A MCB along with construction of shallow foundation with cement concrete for high Mast considering the safe soil bearing capacity as per site condition, as per drawing and design of manufacturer of the mast. The soil test and submission of its report is within the scope of the work (as per appd drawing)

Supply & Fixing of angle iron frame fabricated from 50mmX50mm MS L angle with cross angle & redial support including six numbers 6inchesX6inches x10 mm MS base plate for fixing on the structure with all necessary welding & fabrication. the structure shall be proper welding as per instruction of E.I.C including painting as directed by E.I.C 72 sq.ft.

Supply & Installation of M.S. structure duly fabricated & welded by 50 mm x 25 mm 18g M.S. square pipe ISI mark with red oxide duly welded size as per approval to be made such a manner that it can be opened towards up direction for taking maintenance.

Supply and fixing ACP back lit LED sign board made 3 mm thick ACP sheet(Alstone/aludecor/Timexbond as appd by EIC) finished with approved metallic colour as back ground(Signal Blue) after router cutting. The riser structure also shall be covered with ACP sheet.(Front side & back side ACP sheet) (including 4 side are moulded by ACP)

Supply & Fixing special type of imported 3 mm thick acylic sheet having dimention of 375 mm dia Biswa Bangla & National Emblem on ACP board with projection of 50mm (Make-Astariglas/UB or equivalent as approved by EIC)

Supply & Fixing special type of imported 3 mm thick acylic sheet having dimention of 375 mm dia WBSIDCL industrial logo on ACP board with projection of 50mm. (Make-Astariglas/UB as approved by EIC)

Supply and fixing special type of imported acrylic letter (3 mm thick) projected on the ACP board 50 mm. The letter font shall be in horizontal line. (Make-Astariglas/UB as approved by EIC)

Supply and fixing special type of imported acrylic letter (3 mm thick) projected on the ACP board 50 mm. The letter font shall be in horizontal line with vinyl cutting pasting letter, having dimention (For official website and email) (Make-Astariglas/UB as approved by EIC)

S&F 230V,1.08 Watt LED module inside the acylic sheet letter. One run for each letter including wiring ( Make- Arihant Powered by Samsung / Aries/GOQ/Osram as appd by EIC)

S&F 230V,1.50 Watt LED module inside the acylic sheet letter. One run for each letter including wiring ( Make- Arihant Powered by Samsung / Aries/GOQ/Osram as appd by EIC)

S&F 230V,.75 Watt LED module inside the acylic sheet letter. One run for each letter including wiring ( Make- Arihant Powered by Samsung / Aries/GOQ/Osram as appd by EIC)

S & F water proof 200 watt power supply system IP65, 50/60Hz frequency, 180 to 260V , AC power supply,.095 power factor for LED lamp. (union / aries make as appd by EIC).

S & F water proof 300 watt power supply system IP65, 50/60Hz frequency, 180 to 260V , AC power supply,.095 power factor for LED lamp. (union / aries make as appd by EIC).

S & F water proof 400 watt power supply system IP65, 50/60Hz frequency, 180 to 260V , AC power supply,.095 power factor for LED lamp. (union / aries make as appd by EIC).

Supply And drawing 2 x1.5 sqmm. copper wire for LED module connection and SMPS connection.(Make: Finolex/KEI/Polycab as appd by EIC)

supply and fixing 25 mm x 25 mm alumminium channel having length 18'

Making brick foundation 4:1 cement motor having dimension 250mmX250mmX500mm with necessary plaster cement finish as per direction of EIC.

Transportation cost for taking away the LED sign board from Company's workshop to work site incl loading/unloading .

Supply, Laying 2 core 10 sq mm XLPE Ar/Al cable in underground trench 460mm (1'-6") wide x 760mm (2'-6") average depth with brick protection on the top of the cable with 8(eight) nos. Brick per meter, incl. filling the space between the brick and cable and also the trench with shifted soil, levelling up and restoring surface duly rammed. (make: Gloster/KEI/Polycab/ as appd by EIC)

Supplying, fitting, fixing and lowering inside the tubewell submersible pump having delivery outlet fitted in spring loaded non return valve capable of delivering required discharge and against a total head from all cases ( Duty conditions given below )directly coupled with submersible motor of reqd. HP to give the required discharge suitable for operation 340-400 volts plus minus 8%, 3 phase, 50 c/s AC supply having Minimum Bore well Dia-150 mm, No. of stages-23, Head (in mtr)-180, Discharge-5.5 m3/hr, NRV Size-50 mm. The materials of pump and motorsshaft aluminium bronze thrust bearing plate. Noryl diffuser, with necessary accessories for submersible pumping set of approved make / model and tubewell top cover suitable for pump set (before procurement, manufacturer's test report / performance curve chart etc. to be submitted for approval). 7.5 HP (Make: KSB/Kirloskar/ Crompton as approved by EIC)

Supply & fixing 20 HP three Phase Centrifugal monoblock pump 2pole- 3000 rpm A class insulation compatible with Star delta Starter ( Havells/ Crompton Greaves/ Control & Switch Gear/ BCH/ L& T I Siemens make) Fully Automatic citation. Horizontal Foot Mounted Induction Motor suitable for 415V ± 10%, 3 Phase, 50 Hz ± 5%, Insulation Class ‘F’, Degree of protection IP 55, Ambient of 50°C conforming to IS 12615:2011, IEC 60034-30-2008. Q = 2140-1150 LPM,((Kirloskar/Crompton Greaves / Aquatic / CRI / V-Guard / Calm / havells make as approved by EIC)

Supply & fixing of 1100V grade 3 core 6 sq.mm flat PVC insulated and PVC sheathed cable with electrolytic grade annealed copper conductor flat cable for submersible pump motor from starter panel to sbmersible pump motor set at borwell as directed by EIC. (Make:Gloster/Finolex/Havells/KEI as approved by EIC) Laying through underground trench.

Supply & fixing of 1100V grade 3 core 2.5 sq.mm flat PVC insulated and PVC sheathed cable with electrolytic grade annealed copper conductor flat cable for submersible pump motor from starter panel to sbmersible pump motor set at borwell as directed by EIC. (Make:Gloster/Finolex/Havells/KEI as approved by EIC) Laying through underground trench.

Supply & fixing of 415 V, 50 Hz,3 Ph.AC Fully Automatic Star Delta Starter of Continuous duty in sheet steel enclosure of the following capacity: 7.5 HP ( with Relay of Max Range in Amp 9-14) ( (make:L&TCat No. MU-G15 FASD CS96091SOVO/ABB/SCHNEIDER as appd by EIC) on angle iron frame

Supply & fixing of 415 V, 50 Hz,3 Ph.AC Fully Automatic Star Delta Starter of Continuous duty in sheet steel enclosure of the following capacity : 20 HP ( with Relay of Max Range in Amp 13-21) (make:L&TCat No MU-G30FASD CS96008/ABB/SCHNEIDER as appd by EIC)

Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials,jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.Payment for painting will be made seperately) 100 mm dia. medium quality.

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.): 100 mm dia (Make: Approved by EIC)

Cast iron double flanged single door swing Non-Return Valve generally conforming to IS 14846 having body, door cover in graded cast iron to IS 210 Gr. FG 200, body and door rings and bearing block of leaded tin bronze to I.S 318 Gr. LTB 2, hinge pin of ST AISI410 valves suitable for maximum working pressure of 10/16 kg/cm2 and body tested 15/24 kg/cm2. 100mm (Make: Kirloskar or equivalent as approved by EIC)

Supplying, fitting and fixing G.I. cap at top of the tube well. 300 mm

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately). 32 mm dia. medium quality.

Supply and delivery of Wall fan 16” Sweep metal blade (Make Crompton Greaves/Orient as appd by EIC)

Supplying and fixing (2+4 way) double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Incl Supply & fixing of Incomer: 40 A DP ISOLATOR with breaking capacity of 10kA, Outgoing: 4 Nos. 6 A SP MCB with breaking capacity of 10kA on DIN rail. Make (Legrand or eqv. as appd by EIC))

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug (make:Legrand/Cabtre/ siemens) point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish. 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC (Make: Finolex/Polycab/Havells or eqv as appd by EIC) (ON BOard)

Supply of surface mounted LED Tube light fixture with 1X20W lamp. (Color Temperature 5000-6500 K), (Havlls : Cat No. LHEXACP7Fn1W020/ PHILIPS/ BAJAJ/ HAVELLS as approved by EIC)

Supply of 1.1KV Al. XLPE Armoured cable as directed by EIC. (Make:-Polycab/ KEI/Gloster as appd by EIC)

3C x 10.0 sqmm

2C x 6.0 sqmm

3C x 35.0 sqmm

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete.for supporting the pipes

Supply & Delivery of 300 MM VENTILATING FANS (Havells Ventilair DB 300mm 70-Watt Exhaust Fan/EPC as approved by EIC

S/F Header arrangement consisting of 100mm dia MS pipe/GI pipe, socket, plug etc. accessories as reqd. for distribution of water of 3 nos of pump motors set as per appd drawing by EIC.

Supply & Laying of 4 core 10 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Supply & Laying of 4 core 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Supply & Laying of 4 core 16 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Please Enable Macros to View BoQ information