REPAIR / REPLACEMENT OF PLASTER JOINERY, TILING CHAJJA, FLOORING SUNKEN TREATMENT, PLUMBING AND REPAIR OF BOUDARY WALL FENCING DRAIN AND PATH AND REPAIR CLEANING OF SEWAGE LINE SEPTIC TANK AND MAN HOLES AT EBS BABUGARH UNDER AGE BR II OF GE NORTH

Amount

Taking down shutter of any description exc 1sqm but n.exc 2 sqm each complete all as specified and directed

Taking down chowkhat with shutters( without taking of shutter from the frames) not exc 1.5sqm each complete all as specified and directed

Taking down chowkhat with shutters (without taking off shutters from the frame) exc 1.5sqm but n.exc 4 sqm each complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable to store and rubbish off the premises complete all as specified and directed

Demolition of brick work or stone boulders masonry built in cement mortar including all quoins aches pillars etc but excluding ashlar facing also ssed stone work complete all as specified and directed

Demolition of cement concrete (unrainforced) in ground floors and paving n.exc 15cm thickness (below or above grond level) complete all as specified and directed

Dismantling AC sheet corrugated or semi corrugated sheet inc. ridges of any description as in roof and including removal from the site complete all as specified and directed.

Demolition wall and ceiling boards (fibre,pulpinsulation etc) or insulation boards /slabs/blankets any thickness including cover fillets complete all as specified and directed

Taking down of cement or cement lime plaster/skirting/ dado of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed

Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surroundds glazed with putty or fixed with bead complete all as specified and directed

S&F 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads in square n.exc 0.50 sqm each pane complete all as specified and directed

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed

M&L for 10 mm thick rendering on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed

M&L for applying 15mm thick rendering using ready mix plaster bags on brick/concrete suface of extenal wall finished even and fair complete all as specified and directed . Make : Ultratech, rediplast, Birla Acrocem. Note Contractor is required to deposit ready mix bags for 100% CA quanitity to Engr-in-charge with in 15 days of issue of WO-I

M&L for preparation of new plastered suface of wall and applying two coats of Acrylic exterier Emulsion paint using roller for painting and also make the surface good using in patch putty complete all as specified and directed

M&L for preparation of old plastered suface of wall and applying two coats of oil bound distemper using roller for painting and also use putty where required to make surface good complete all as specified and directed

M&L for Preparing of new plastered suface of ceiling and applying two coats of white wash on ceilling complete all as specified and directed

S&F Plain framed, panelled shutter (two panel) factory made 35 mm thick of 2nd class HW rail and stylewith lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), Kiln seasoned and chemically pressure treated,.

S&F shutters 35 mm thick of 2nd class HW factory made open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkats.

S&F steel windows with pressed steel frame made out form 1.25mm thick steel with one or more rebate with glazed shutters and fly proofing shutters including guard bars, hinges, peg stay, handles, tower bolts, lugs including treated with for or coal tar black paint on steel surface in contact/embedded in concrete/ masonry work complete all as specified and directed Note- Disturbed suface of wall shall be made good to true suface

S&F steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed

S&F powder coated aluminium frame for doors windows ventilaters with one or more repates including joining cleat for fixing etc complete all as specified and directed

S&F powder coated aluminium door shutters aluminium sectioin weighing .55kg/m including necessory joining cleats ,glazing clips, rubber neoprene packing handles 2 nos in each door, hinges anodised aluminium snap beading screws etccomplete all as specified and directed

S&F powder coated aluminium window and ventilater shutters fixed type with out sash bar aluminium section weighing .55 kg/m including necessary joining cleat , glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed

S&F 4.8mm thickness sheet glass ordinary quality and glazing with oil putty in square n.exc .5sqm in each pane complete all as specified and directed

All as per Srl item No 25 here-in-before but exc 0.5 sqm in each pane

S&F in repairs floor door stopper of aluminium alloy body and tongue anodised with hand brawn steel spring fixed in floor overall length of cover plate 1401mm complete all as specified and directed

S&F in repairs door closer hydraulically aluminium (extruded section paty) designation No3, universal type suitable for door shitter of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed

S&F in repair mild steel wire cloth, 0.56 mm nominal dia. of wire and avg width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed

S&F 250mm length of bolt aluminium alloy anodised sliding door bolt with h asp ,staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolt and sliding baths of extruded sections or cast aluminium alloy complete all as specified and directed

S&F aluminium anodised 150mm length borrel tower bolt of extruded section complete all as specified and directed

S&F 125mm Extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed

S&F Brass chromium plated tubular towel rail 20mm dia , D type 60mmlong between flanges complete all as specified and directed

M&L Preparation of new wooden surface and applying two coat of synthetic enamal paint over a coat of pink primer described over 10cm width or girth complete all as specified and directed

M&L Preparation of old wooden surfaces and applying one coat of synthetic enamal paint described over 10cm width and girth complete all as specified and directed

M&L Preparation of new steel suface and applying two coat of synthetic enamal paint over a coat of red oxide described over 10cm width and girth complete all as specified and directed

M&L Prepration of old steel surfaces and applying one coat of synthtic enamel paint described over 10cm width and girth complete all as specified and directed

S&F grid of size 605X605mm anodised aluminium snap grid frame work for false ceiling complete all as specified and directed

S&F 4mm thick non asbestos fibre cement building boards fixed or laid /inserted to timber /GI/aluminium frame work with screws complete all as specified and directed

S&F in repairs 18/19 mm thick prelaminated particle board ,interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with secrews timber frame and 5mm thick teak wood beads all round to prelaminated boards including piano type hinges complete all as specified and directed

Supplied and fixed mild steel works as for frame work for ceiling using angles, tee etc, drilling holes, welding,hanginging with 4 mm dia GI wires at suitable spacing, support to velley gutters, wind ties for roof sheets, framing for monkey proofing, and similar works including all necessary drilling,bolting or rivetting etc and similar work confirming to Fe 290 gde E 165.all as specified and directed.

S&F rolled mild steel in rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

M&L granite(of any type) tiles 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with ad mixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed

M&L for laying 25mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in floor/plinth protection, cement concrete surfaces finished even & fair without using extra cement complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L for laying 75mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

S&F in repair 15mm dia pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or with out lettered 'Hot or 'cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed

S&F in repair 15mm dia brass C.P WHB mixer for mixing hot and cold water screwed docon for iron pipe complete all as specified and directed

S&F in repair 15mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed

S&F in repairs 15mm dia Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

All as per Srl item No 53 here-in-before but 20mm bore

S&F in repairs CP bib tap 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed.

S & F in repair 15 mm bore bib taps standard of PTMT any colour high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed. (Min weight 15mm - 90gms)

S&F in repairs 15mm bore pillar taps of PTMT any colour high press ure screwed for iron pipe complete all as specified.

S&F in repair 15mm bore angle stop valve of PTMT any colour high pressure screwed for iron pipe (minimum wt 15mm-90grms) complete all as specified.

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium red & high density plastic ball screwed for iron pipe(minimum wt 20mm-210grms) complete all as specified.

S&F in repair grating doom 125mm dia with waste holes of PTMT (minimum wt 40 grms) complete all as specified and directed

S&F in repairs towel ring of PTMT fixed with and including C.P brass crewes and wooden /plastic cheat.(minimum wt 90 grms) complete all as specified and directed

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed

S&F PVC(SRW)75mm floor trap,plain with grating including jointing with solvent cement complete all as specified and directed

Taking up or down existing steel tubing and connections of 15mm bore including clearing for removing air lock / blockage of water and refixing the same in its original position complete all as specified and directed.

Taking up or down existing steel tubing and connections of 20mm bore including clearing for removing air lock / blockage of water and refixing the same in its original position complete all as specified and directed.

S&F 15mm GI tube medium grade galvnised with all fittings laid on trenches and wall complete all as specified and directed

All as per Srl item No 66 of here-in-before but 20mm tube

Dismantling of old water tank exc 250 Ltrs & n.exc 500 Ltrs capacity and Supplied, hoisted and fixed in position any colour rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

Dismantling of old water tank exc 500 Ltrs & n.exc 1000 Ltrs capacity and Supplied, hoisted and fixed in position any colour rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltrs capacity with and including 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F in repair to liters capacity PVC valvelen syphonic action type flushiop cistern low level white with inlet ball valve float and handle including bracket complete all as specified and directed

S&F in repair viteress china bowl urinal flat back sizeof 465X355X265 mm chote (minimum) with grating and union for discharge pipe and watepipe (encluding flushing cistern) complete all as specified and directed

Taking down aluminium shutter exc 1sqm but n.exc 2sqm and refixing some opening after repair of aluminium shutter such as rubbers gaset, hanging of shutter , setting of shutter in original position etc complete all as specified and directed

S&F in repair of viteress china squatting pan of pattern "long pan" size 580 x 440 mm white with ‘P’ or S trap, front or back inlet and foot regte any pattern(excluding flushing cistern and flush pipe complete all as specified and directed

Supplied and fixed in repair vitreous china WHB white flat back size 630x450mm including Supplied and fixed angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repairs plastic cipla plast multipurpose bath room coloured mirror cabinet storase size height 54cm ,35cm width and 13cm depth wall mount complete all as specified and directed

M&L Preparing ,cleaning new concrete/plastered surface and applying evenly a tack coat @1.20 kg/sqm with 85/25 industrial bitumen over a coat of bitumen primer @ 0.30 liter/sqm and laid with 3mm thick APP modified polymeric water proofing membrance with non-woven polyester rainforced and applying a tack coat of 85/25 industrial bitumen @ 1.2 kg per sqm and finish the surface with aluminium paint at top @ 0.2 kg/sqm as per manufacturer's instructions. Weight of membrane shall not be less than 3.6 kg/sqm unrolled and bonded to substrate with side and end laps 75mm & 100mm as per manufacturer's instructions. complete all as specified and directed.

Taking down old existing water proofing treatment with roof tiles of any type from top of RCC/arch slab including taking down of concrete padding or plaster and raking out joints of arch slab and hacking the top of RCC slab, cleaning with water and dispose off rubbish upto 200 meter complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

M&L for Glazed ceramic tiles coloured 350mmx 250mm , 6 to 7 mm thick first quality on vertical surface such as skirting / dados etc set in neat cement slurry over CM screed (screed shall be measured and paid for separately under respective item). Jointed complete all as specified and and directed all as specified and directed

M&L for 10 mm thick backing coat in cement mortar 1:4 on wall of brick work or concrete surface, to receive tiles all as specified and directed.

M&L for non skid coloured ceramic tile 7 to 8 mm thick area of each tile exceeding .18 but n.exc .38 sqm in floors etc set and jointed in neat cement slurry over CM screed (screed shall be measured and paid for separately under respective item). Jointed complete all as specified and and directed all as specified and directed

M&L for vitrified ceramic coloured tiles 10mm thick (Squro/rectangular) poleshed area of each tiles not exc .36sqm in floors etc set and jointed in neat cement slurry over CM screed (screed shall be measured and paid for separately under respective item). Jointed complete all as specified and directed

All as per Srl item No 83 here-in before but on vertical surfaces such as skirting / dados etc

M&L for Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed

M&L for machine cut kota stone slab flooring of thickness 18-20mm and jointed with grey cement slurry mixed with pigment to match the shade of slab of flooring inc rubbing & polishing over CM screed (screed shall be measured and paid for separately under respective item) Jointed complete all as specified and directed complete all as spd and directed

M&L for Screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed

Supplied and fixed 75mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint, laid in trenches/under floor complete all as specified and directed.

Supplied and fixed 110mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint, laid in trenches/under floor complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed

All as per Srl item No 90 here-in-before but 110mm bore

Taking down eaves gutter and rain water pipe and size any pattern PVC /AC pipe including all fittings heads shoes bands etc including removal to store complete all as specified and directed

M&L for brick work with fly ash bricks straigt or curved on plan exc CM mean radious build in CM 1:6 complete all as specified and directed

Dismantiling timber scantlings 40 sqm and over in section in any position unframed work complete all as specified and directed

Dismantling of timber scantling framed work under40sqcm in section in fillets, rails posts etc all as specified and directed.

S&F in repairs stainless steel peg set 8 nos in 45cm length stirrupe dia of hooks 6mm complete all as specified and directed

S&F hollow PVC wall lining consisting of 5mm thick plain colour PVC sheet including of solvent cement and fixing at site on PVC frame as per specification and drouing complete all as specified and directed

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

S&F in repair viteress china wash down water closet pan (padestal pattern) white one piece wall mounted type (inc flushing cistern) including connection to drain or outgoing pipe and to flushing pipe antisyphonage pipe etc incl UF soft closed seat cover complete all as specified and directed Make : Jaquar, Cat No : LYS-WHT-38851P

To attend and rectify sewage complaint such as blockage/ chocked bathroom / WHB drainage and also outlet PVC/CI pipe and making functional Ist man hole sewage line etc complete all as specified and directed and directed any type any time between 8.30 AM to 5 PM excluding sunday & closed holiday all as specified and directed. They will report daly report to complant cell at 0830 hrs daily except sunday & closed holiday. Contractor or his representative collect the complants at 0830 hrs from compliant cell of AGE B/R - II and the complaints will be attended/make good/rectified within 24 hrs on receipt of the complaints and info the status of the compaintd at 1700 hrs every day to complaint cell. On failure of the same a penalty of Rs 100/- per day per compaints will be charged.).

To attend and rectify sewage complaint such as blockage/ chocked WCs and also outlet PVC/CI pipe and making functional Ist man hole sewage line etc complete all as specified and directed and directed any type any time between 8.30 AM to 5 PM excluding sunday & closed holiday all as specified and directed. They will report daly report to complant cell at 0830 hrs daily except sunday & closed holiday. Contractor or his representative collect the complants at 0830 hrs from compliant cell of AGE B/R - II and the complaints will be attended/make good/rectified within 24 hrs on receipt of the complaints and info the status of the compaintd at 1700 hrs every day to complaint cell. On failure of the same a panelty of Rs 100/- per day per compaints will be charged.).

To attend and rectify sewage complaint such as blockage/ chocked Kitchen block and also outlet PVC/CI pipe and making functional Ist man hole sewage line etc complete all as specified and directed and directed any type any time between 8.30 AM to 5 PM excluding sunday & closed holiday all as specified and directed. They will report daly report to complant cell at 0830 hrs daily except sunday & closed holiday. Contractor or his representative collect the complants at 0830 hrs from compliant cell of AGE B/R - II and the complaints will be attended/make good/rectified within 24 hrs on receipt of the complaints and info the status of the compaintd at 1700 hrs every day to complaint cell. On failure of the same a penalty of Rs 100/- per day per compaints will be charged.).

Cleaning of manholes by taking out complete sludge water, solids, brick bats, polythene silt etc complete by mannualy or mechanically by HCV mounted suction discharge machine, removing/disposing the entire retrieved material outside periphery of defence land including taking off manholes cover and re-fixing the same after cleaning but cleaning of size 600x600 and 600 mm depth complete all as specifed and directed.

Cleaning of manholes by taking out complete sludge water, solids, brick bats, polythene silt etc complete by mannualy or mechanically by HCV mounted suction discharge machine, removing/disposing the entire retrieved material outside periphery of defence land including taking off manholes cover and re-fixing the same after cleaning but cleaning of size 900x900 and 600 mm depth complete all as specifed and directed.

Cleaning of manholes by taking out complete sludge water, solids, brick bats, polythene silt etc complete by mannualy or mechanically by HCV mounted suction discharge machine, removing/disposing the entire retrieved material outside periphery of defence land including taking off manholes cover and re-fixing the same after cleaning but cleaning of size 1200x1200 and 1000 mm depth complete all as specifed and directed.

Cleaning of septic tank up to 25 users capacity by mannually / Machanically in the following steps:- (i) Dewatering of septic tank (ii) Removing of all sludge/waste material from all chambers of the septic tank, clean the floor and walls of the tank after removing complete sludge/materials with clean water (iii). Removing the temprary blockage of inlet/outlet pipe and making functional the septic tanks. (iv) Remove all taken out sludge/ waste materials in covered containers out side the Defence Land. any means and getting out and removing sludge to a distance up to 3 km out side of defence land limit and disposal in low lying area. complete all as specified and directed.

Dewatering of soak well completely of n.exc 3 mtr dia and n.exc 6 mtr depth by means of pumping out to out side of defence land complete all as specified and directed.

Dewatering of soak well completely of n.exc 1.80 mtr dia and n.exc 4.5 mtr depth by means of pumping out to out side of defence land complete all as specified and directed.

Cleaning and maint of sewage line of size 150mm dia and 2-6 mtr depth manholes (as per MAP QTR COMMON CENTRAL SEWAGE LINE and MANHOLES) in the following steps:- (i) Dewatering of manholes (ii) Removing of all sludge/waste material from all manholes, desilting of floor, lean the floor and walls of the manhole after removing complete sludge/materials with clean water (iii). Removing the temprary blockage of inlet/outlet pipe and making functional the manholes. (iv) Remove all taken out sludge/ waste materials in covered containers out side the Defence Land. any means and getting out and removing sludge to a distance up to 3 km out side of defence land limit and disposal in low lying area and incl removing of all types of blockage of any length between two consecutive deep manholes and to keep smooth functoining without any blockage in any situation by mechanical means with manual and mechanical process incl removel and refixing of man hole covers complete all as spefied and directed

M&L for Desilting of the existing drainage including excavation in trenches in soft/loose soil wherever required on site complete all as specifed and directed by Engineer - in - charge.

------------BLANK-------

M&L for Soakage wells excavation in ordinary Soil, Foundation in PCC 1:3:6, Type-C2 (40mm crushed stone aggregate) wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete of size 1.2 M dia X3.00M deep. Ref TD HQ CEBZ drg No TD/309 sheet No 1/4, 2/4, 3/4& 4/4. complete all as specified and directed

M&L for Soakage wells excavation in ordinary Soil, Foundation in PCC 1:3:6, Type-C2 (40mm crushed stone aggregate) wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete of size 1.8 m dia X4.5 m deep. Ref TD HQ CEBZ drg No TD/309 sheet No 1/4, 2/4, 3/4& 4/4. complete all as specified and directed

M&L brick work with fly ash old size bricks, straight or curved on plan exc 6 cm mean radius built in cement mortar 1:4 complete all as specified and diretced.

M&L for (Except brick) brick work with Sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for prepraton of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Cutting of grass, growth/vegetations, bushes or like and similar work and making the workable space for cleaning for carrying out cleaning of sewage line/manholes in any location or condition etc all as specified and directed by Egnineer - in - Charge.

Excavation in trenches in soft/loose soil n. exc 1.5 m wide & n. exc 1.5 m in depth for foundations for shafts, wells cesspits, manholes, pier holes & getting out complete all as specified and directed

Returning, filling in layer including leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed

Removing surplus soil / drainage silt to a distance exceeding 250 m and n. exc 500m & depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed

M& L for providing Cement concrete 1:4:8 Type D 2 (using 40 mm graded crushed stone aggregates) ,in foundations, filling and mass concrete complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for prepration of old decorated surfaces of walls including cornices, pilasters etc (Plastered or unplastered surfaces) and applying one coat of cement base paint complete all as specified and directed

M&L cement concrete (1: 2:4) type B-1 using (20mm graded stone aggregate) as in coping, benching/flooring of man hole at septic tank and the like weathering slightly rounded or chamfered angles & throating complete all as specified and directed by Engr-in-Charge.

M&L cement concrete (1: 2:4) type B-1 using (20mm graded stone aggregate) as in coping, the like weathering slightly rounded or chamfered angles & throating complete all as specified and directed by Engr-in-Charge.

Demolition of RCC of any description and in any position not otherwise specifically provided complete all as specified and directed

M&L for precast RCC 1:2:4 type B-1 (using 20mm graded stone agg) in manholes covers and similar articles set in cement mortor 1:4 at site complete all as directed by Engineer-in-Charge.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as per Srl item No 129 here-in-before but 5mm dia and over up to and including 10mm diaas in stirrups, spacers / binders.

M&L for RCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) as in slab supported on walls, beams, columns in floors roof landing, balconies canopies, deck slabs and in shelves complete all as specified and directed.

M&L for form work soffits of suspended slab, such as roof slabs floor slabs, landing and similar work complete all as specifed and directed

M&Lfor Cutting into existing manholes for connecting new drains by cutting out existing benching for forming branch, channel (1/2 round or ¾ section) in cement concrete (1:2:4)type B-1 smooth finishing & making good to pipe as per existing by rendering & reforming benching as reqd upto for 225 mm bore pipe complete all as specified and directed by Engr-in-Charge.

Demolition and breaking up drain pipes ( SGSW, AC or reinforced concrete) or PVC pipe set in cement mortar for 75mm / 100mm / 110mm internal dia of pipe and including removal from the site complete all as specified and directed.

M&L for SGSW 'grade 'A' drain pipe 150 mm internal dia laid in trenches , jointed and tested complete all as specified and directed.

M&L for providing concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe in PCC 1:3:6 type C2 (using 40 mm graded crushed stone stone aggregates) complete all as specified and directed.

High Tech Metal India

M/S VIKRANT ENTERPRISES

GARG CONSTRUCTION CO