GE I R AND D/CHD-27/2022-23

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed.

All as per serial item No 1.00 above but exc. 1.5 Sqm and n.exc. 4 Sqm each.

Taking down shutters of any description n.exc. 1 Sqm each complete all as specified and directed.

All as per serial item No 2.00 above but exc. 1 Sqm and n.exc. 2 Sqm each.

Refixing shutters of any description n exc 1 Sqm each in same opening.

Refixing shutters of any description exc 1 Sqm but n exc 2 sqm each in same opening.

Cutting holes for inserting hold fast and making good dismaltled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1as required exc one brick but not exc two bricks complete all as specified and direcrted.

Supply and fixing for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.

Supply and fixing for factory made solid PVC chowkhats or frames of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and directed.

Supply and fixing for aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed.

All as per serial item no 8.00 above but 100mm long.

Supply and fixing for aluminium anodized handle of extruded section 150mm long complete all as specified and directed.

All as per serial item no 9.00 but 125mm long.

Supply and fixing for aluminium anodized door stopper 140mm long overall length complete all as specified and directed.

Supply and fixing for MS butt hinges medium weight cold rolled 100mm size complete all as specified and directed.

All as per serial item no 11.00 but 75mm size.

Supply and fixing for continuous (piano) hinges, mild steel, bright finish or electro-galvanised width of trap when open 40mm thick complete all as specified and directed.

Supply and fixing for 200 mm aluminium, anodised, barrel tower bolts of extruded section and fixed.

Supply and fixing for 150 mm long aluminium handles,cast type anodised, complete all as specified and directed.

Supply and fixing for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel bright finished.

Supply and fixing for 100mm size of aluminium hasp & staple including bolt to hinge plate & fixed with screws, complete all as specified and directed.

Supply and fixing for factory made ERW section window box type ( 'P' Section) with hinges, steel handle, peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fixing for factory made ERW section window box type ( 'P' Section) with hinges, steel handle, peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

Supply and fixing for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.

Supply and fixing for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded.

Supply and fixing for steel ventilator with top hung shutter includig hinges steel peg stay, handle complete all as specified and directed.

Material and labour for framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 410-0 0r Fe 310-0.

Material and labour for plain, solid, straight chowkhats and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints using 2nd class hardwood (hollock) complete all as specified and directed.

Supply and fixing for 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed.

Supply and fixing for 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

Supply and fixing for 35mm thick 2nd class hardwood (Hollock) factory made glazed and skelton shutters, open rebated and prepared to receive glass etc divided into squares with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members complete all as specified and directed.

Supply and fixing for 35mm thick 2nd class hardwood (Hollock) factory made framed, panelled shutter (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces and fitted to chowkhats size of rails and styles as per IS-1003 (Part-I). The timber shall be kiln seasoned and chemically pressure treated complete all as specified and directed.

Dismantling of board of any description complete all as specified and directed.

Supply and fixing for 19mm thick prelaminated particle boards (both side laminated) of interior grade type II grade I of approved shade complete fitted in cup board shutters complete all as specified and directed.

Supply and fixing for 2nd class hard wood plain fillets sectional area exc. 6sqcm n.exc. 13 Sqcm clean sawn, secured with nails or brads complete all as specified and directed.

Supply and fixing for 2nd class hard wood plain fillets sectional area exc. 3sqcm n.exc. 6 Sqcm clean sawn, secured with nails or brads complete all as specified and directed.

Supply and fixing for MS helical door spring (rat tail pattern) 300mm long including roller and roller plate complete including welding and providing 40 X 3mm flat iron welded to angle iron frame as in repair complete all as specified and directed.

Supply and fixing for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

All as per serial item no 33.00 above but fixed in repairs.

Supply and fixing for mild steel work as in doors or gates of angle or other section of grade Fe-410-W with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting) fasteing and fixing complete fixed in repair complete all as specified and directed.

Supply and fixing for SS fancy type curtain rods fixed in repairs incl brackets & Finial complete all as specified and directed.

Material and labour for for PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate as in filling of pressed steel chowkhats complete all as specified and directed.

Supply and fixing for 30mm thick flush shutters, solid core construction, with block board care and plywood face panels, commercial type on both sides complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame complete all as specified and directed.

Supply and fixing for 3.0mm thick ordinay sheet glass in squares n.exc. 0.5 Sqm each pane with oil putty complete all as specified and directed.

All as per serial item no 39.00 above but of thickness 4.8mm.

Supply and fixing for figured glass, pin head type and glazing with oil putty in squares n.exc. 0.5 Sqm each of thickness 3.0mm.

Material and labour for for anodised aluminium standard section of size 101.60X44.45X2.0mm thick for door/window frame including jointing aluminium cleats of suitable size and lugs, etc complete all as specified and directed.

Material and labour for anodised aluminium door shutters single/double leaf, side hung type, with top and lock rail of size 83X44.45X2mm thick, bottom rail 150X 44.45X2mm thick styles/meeting styles shall be of size 83X44.45X2mm thick including jointing cleats, rubber beading snap fit clips, aluminium screws etc, panels fitted with prelaminated particle board/glass including builders hardware ie aluminium tower bolt 150mm long 2 nos to each shutter , aluminium door handle 200mm long 2 nos to each shutter complete all as specified and directed. (Prelaminated board and glass to be measured & paid separately).

Supply and fixing for double action floor spring for aluminium door shutters fixed in repairs complete all as specified and directed.

Supply and fixing for in repairs hydraulic door closer of aluminium fixed to door shutters of designation complete all as specified and directed.

Supply and fixing for in repairs 100mm size mortice locks of aluminium body, 4 levers suitable to aluminium door shutters complete all as specified and directed.

Supply and fixing for aluminium anodised window shutters, powder coated, side hung type without sash bars, aluminium section 83X44.45X2mm thick including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium builders hardware such as peg stage 150mm long -01 No, aluminium handles of size 100mm-01 No as each shutters, window shutter to be fitted with glass panes complete all as specified and directed by Engr-in-charge (glass panes to be measured & paid separately).

Supply and fixing for in repairs ventian blinds, vertical type, complete all as specified and directed by Engr -in - Charge.

Supply and fixing for plain sheet glass, ordinary quality 4.8mm thick in panels of aluminium doors/windows/partitions fixed with aluminium glazing clips & rubber beading complete all as specified and directed.

All as per serial item no 49.00 above but wired glass 6.4mm thick.

Supply and fixing for 12mm thick prelaminated particle board (both sides laminated) of interior grade, type-II of approved brand with lamination of approved shades complete fitted in door panels, partitions etc complete all as specified and directed.

Material and labour for aluminium anodised section of 101.60mmX44.45mmX2mm for aluminium partitions, powder coated, fixed in position complete all as specified and directed.

Supply and fixing for in repairs powder coated aluminium grills, fixed to aluminium windows/partitions/door frame including all fixing arrangements like aluminium channels, screws etc complete all as specified and directed.

Dismantling existing wall/ceiling board any type including wooden framed work/GI frame work of any size & specifications complete all as specified and directed.

Supply and fixing for PVC wall Lining consisting of 4 to 5mm thick hollow type, single side prelam PVC sheet used instead of plain colour sheet fix to wall with screws incl matching PVC beading complete all as specified and directed.

Supply and fixing for 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

Supply and fixing for 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

Supply and fixing for rubber beading in aluminium doors and windows fixed in repair

Supply and fixing for aluminium beading in aluminium doors and windows fixed with screw as in repair

Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing rubbish off the premises.

Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as speecified and directed

All as per serial item no 60.00 above but except brick complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in bed plates, hold fast ,lacing course coping, bed blocks etc complete all as specified and directed.

Taking down cement plaster on brick walls including hacking out joints, hacking for key, scrubbing down with water.

Material and labour for Rendering 15 mm thick internal using cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces complete all as specified and directed.

Material and labour for Rendering 15 mm thick external using cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces complete all as specified and directed.

Material and labour for two coats of synthetic enamel painting over a coat of pink primer including preparation of previously untreated surfaces of wood or wood based material exc. 10 cm width or girth complete all as specified and directed.

Material and labour for painting one coat of synthetic enamel paint on steel surfaces (finished coat) to flat surfaces of any descirption including preparation of old surfaces complete all as specified and directed.

Material and labour for for two coats of synthetic enamel paint including one coat of red oxide primer on steel surfaces exc. 10cm width or girth including preparation of new surfaces, complete all as specified and directed.

Material and labour for applying two coats of exterior acrylic emulsion (Weather Coat-antifungal) paint ) over a coat of exterior primer on plastered surfaces complete all as specified and directed.

Material and labour for for preparing newly plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whiting, white primer complete on walls complete all as specified and directed.

Dismantling floor/heart or wall tile including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and directed.

Material and labour for non-skid colour ceramic tiles (joint free) 7 to 8 mm thick (square/rectangular) area of each tile execeeding 0.11 Sqm but n.exe 0.18 sqm , as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the exsisting area over and including 15mm thick screed bed or bedding of cement morter (1:6) for laying floor finishs complete all as specified and directed.

Material and labour for colour ceramic tiles (joint free) 7 to 8 mm thick (square/rectangular) area of each tile execeeding 0.11 Sqm but n.exe 0.18 sqm , as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the exesisting area over and including 10mm thick screed bed or bedding of cement morter (1:4) for laying floor finishs complete all as specified and directed.

Material and labour for colour ceramic tiles in vertical surface 300 x 450 x 7 mm thick (square/rectangular) . set and jointed in neat cement slurry and pointed in white or coloured cement to match the exesisting area over and including 10mm thick screed bed or bedding of cement morter (1:4) for laying floor finishs complete all as specified and directed.

Welding in repairs to windows, door hinges, grills etc exc 2.50 cm of thickness not exc 6mm complete all as specified and directed.

Material and labour for preparetion of plastered or unplastered old decorated surface of wall includind pillaster and cornices etc and applying one coat of plastic emulsion paint on ceilling complete all as specified and directed.

Material and labour for preparetion of plastered or unplastered old decorated surface of wall includind pillaster and cornices etc and applying two coat of plastic emulsion paint on over a layer of Birla Care Puttey on wall wall complete all as specified and directed.

Material and labour for preparation of old decorated distempered surfaces of walls and apply one coat of oil emulsion distemper to Ceiling complete all as specified and directed.

Material and labour for washing rubbing down and stopping old treated plastered surface of walls including scraping and applying two coat of oil bound distemper over a layer of birla putty complete all as specified and directed.

Material and labour for preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete as specified and directed.

RAJESH KUMAR

GOODWILL ENGINEERS