SPECIAL REPAIRS TO DRAIN AROUND THE EXISTING OFFICERS VEH PARKING AREA PROVN OF 04 LIGHT VEH PARKING SHED AND PROVN OF HARDSTANDING WITH INTERLOCKING TILES AROUND GYM AT HQ TASA UNDER AGE B R N NO I OF GE N SECUNDERABAD

Amount

Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in any type of soil complete all as specified.

Removing excavated material to a distance not exc. 50 m and depositing where directed at a level n. exc. 1.50m above the starting point complete all as specified and as directed.

M&L PCC (1:4:8), type D-2, (using 40mm graded stone aggregate) as in foundations, filling, mass concrete etc complete all as specified and directed.

M&L PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in copings,kneelers, kerbs, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed chamfered necessary for work complete all as specified and as directed.

M&L PCC (1:2:4) type B1, (using 20 mm graded stone aggregate) as in surface channels and drains etc.complete all as specified and as directed.

M&L Pre cast RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in cover slabs for manholes, and set in CM (1:4) including necessary formwork complete all as specified and directed.

M&L Providing RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in beams, cantilevers bressummers lintels over 1.5 m span,etc complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams,lintels,beam haunching, etc for rough finished flat surfaces of concrete complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed.

M&L Brickwork with fly ash bricks (using old size bricks) straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.

M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed.

All as per Item No.14 above, but 6 to 8 mm dia complete all as specified and directed.

All as per Item No.14 above, but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and as directed.

S&F Joist, channel, angle or tee sections, fixed independently , without connection plate etc (cut to ordinary length within 20mm of the length) conforming to Fe 410-W (Gde E-250 quality-B) complete all as specified and as directed

S&F Wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

S&F Framed work such as gates, grills, gratings, hook and Pintle higes for large steel gates, railing etc including round headed screws or welding seams including bending or turning up mitred angles etc as required etc, with ends of bars shouldered and/or riveted, or forged into spiles; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; gates, railings, rollers etc and similar work conforming to Fe 290 or Gde-E165 and complete all as specifed and directed

S&F 1.00mm thick mild steel, plain,black sheet in wall cladding, steel gates and similar work cut size, holes punched, including round headed screws or welding seams including bending or turning up mitred angles etc complete all as specified and directed.

S&F Mild steel framed work as in doors and chowkats or gates, ladder etc of angle or other section with gusset plates, rails, braces, MS sheet etc, complete, drilled for fixing of steel sheeting are other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging fittings and conforming to Fe 410-W (Gde E-250) quality ‘A’ complete all as specified and as directed

S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and as directed

S&F 3.0 mm thick sheet glass ordinary quality and glazing with putty in square n. exc 0.50 Sqm each pane complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating galvanised based corrugated steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as roof covering/cladding to wall fixed with self tapping (SD) screws complete all as specified and as directed

S&F Pre-painted galvalume aluminium zinc coating galvanised based profiled/plain steel sheet 0.50mm thick, AZ-150 of approved colour sheet of 0.50 mm thick having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping (SD) screws complete all as specified and as directed

Demolition of concrete in ground floors (un re-inforced) and paving n.exc. 15 cm thickness (below or above ground level) and including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L Hard core of broken stone or boulders of gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rolling with power roller exc. 8 tonne & n.exc. 12 tonne to a true surface complete all as specified and directed.

M&L 100mm thick PCC ( 1:4:8 ), type D-2 (using 40 mm graded stone aggregate), as in sub base of floor complete all as specified and as directed.

M&L 75 mm thick PCC ( 1:4:8 ), type D-2 (using 40 mm graded stone aggregate), as in sub base of floor complete all as specified and as directed.

M&L 60 mm thick, M-35 grade, machine made, 1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks of triangular / Zigzag / Haxagone/ I , in shape or design as approved, with grey cement and pigment and conforming to IS specifications, complete all as specified and directed.

M&L 80 mm thick, M-40 grade, machine made, 1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks, of triangular / Zigzag / Haxagone/ I , in shape or design as approved, with grey cement and pigment and conforming to IS specifications ,complete all as specified and directed.

M&L Sand filling under floors or in foundations or under paver blocks including watering and consolidation complete all as specified and as directed.

M&L 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as specified and as directed.

M&L Rendering 10 mm thick CM (1:6) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.complete all as specified and as directed.

M&L Rendering 15 mm thick CM (1:4) on fair faces of brick work or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15 mm thick in two coats, 10 mm thick in CM (1:6) and 5 mm thick in CM (1:4) mixed with integral water proofing compound as per manufacturers instructions, on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L Preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M & L Preparation of new or previously untreted steel or iron surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L 100 mm internal dia salt glazed stoneware drain pipes, grade ‘A’ laid in trenches with cement joints complete all as specified and as directed

M&L 150 mm internal dia salt glazed stoneware drain pipes, grade ‘A’ laid in trenches with cement joints complete all as specified and as directed

M&L Concrete bed to 100 mm dia pipes with using PCC (1;3;6) type C-2(using 40 mm graded stone aggregate) including packing under and haunching against the side of pipes after they are laid and tested complete all as specifed and directed.

M&L Concrete bed to 150 mm dia pipes with using PCC (1;3;6) type C-2(using 40 mm graded stone aggregate) including packing under and haunching against the side of pipes after they are laid and tested complete all as specifed and directed.

M&L 600 mm bore RCC pipes, class NP3 with one collar per length laid in trenches and jointed with cement joints including demolition and breaking up drain pipes set in cement mortor complete all as specified and as directed

M&L Concrete bed to 600 mm dia pipes using PCC (1;3;6) type C-2(using 40 mm graded stone aggregate) including packing under and haunching against the side of pipes after they are laid and tested complete all as specifed and directed.

M & L Point wiring with 1.5 Sqmm FRLSH copper conductor single core PVC insulated sheathed 1100 V multistranded drawn through including surface non-metallic rigid PVC conduit,medium grade and modular accessories including fixing/grouting sunken/ surface along with modular flush box of sutiable thickness covered with suitable modular cover plate including running up of 1.5 Sqmm FRLSH copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc for one light/fan/Bell point controlled by one, one way switch 6A, SP complete all as specified and directed. Note: Rate of Modular Flush box and Cover plate are inclusive of rate quoted by the contractor

All as per Item No.49 above but using 2.5 Sqmm FRLS single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 6/16 Amps switch socket combination point including running of 2.5 Sq mm FRLS copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S & F Modular switch 1 way 6 A, 1 Module capacity 230 volts complete all as specified and directed.

S&F Socket outlet modular type multipurpose 2/3 Pin, 6/16 Amps, 230 volts combined 2 Module complete all as specified and directed.

S & F Modular switch 1 way 16 A, 1 Module capacity 230 volts complete all as specified and directed.

S & F Lamp holder insulated body,surface bakelite with back plate suitable for angle or batten fittings fixed with wooden round blocks including 9 W LED bulb complete all as specified and directed.

S & F Ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and directed.

S & F Wall mounted LED batten with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1 x 20w, 230 volts, bipin holders, DIFFUSED TYPE connector block internally prewired etc with 2 Nos PVC round blocks for mounting arrangements including all accessories with new 3 core multi stranded copper conductor of size 23/0.193 from ceiling rose to fitting and including LED Tube 20W complete all as specified and as directed.

S&F LED security light luminaire fitting of 1x35 Watts with deep drawn housing including all accessories with suitable dia GI bracket 0.60 Mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as sepcified and as directed.

S&F MCB, SPN,63 Amps, 240 Volts, C curve suitable for fixing in MCB DBs complete all as specified and as directed.

S&F MCB, SP 6 to 32 Amps, 240 Volts, C curve suitable for fixing in MCB DBs complete all as specified and as directed.

S &F Sheet metal enclosure MCB DB SPN 4 way with suitable rated bus bar 240 Volts double door with magnetic locking system complete all as specified.

M & L Submain wiring with two runs of single core 6 Sqmm FRLSH PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of 6 Sqmm FRLSH copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Three runs of 6 Sqmm cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

M/S DIVIJA BUILDERS (BID ID -3277736)

Venkat Ramaiah (BID ID -3277902)

M/s GM Constructions (BID ID -3274513)

S.R.M.K Enterprises (BID ID -3277830)

M/S RADHIKA ENTERPRISES (BID ID -3273655)

SREE LAKSHMI NARASIMHA ENTERPRISES (BID ID -3277648)

K LAKSHMAN SINGH AND CO (BID ID -3270125)

PARDEEP AND CO (BID ID -3274352)

NEWS CONSTRUCTIONS (BID ID -3277976)

AMK Builders (BID ID -3277301)

J.V.V.K.PRABHAKARARAO (BID ID -3274549)

harshraj and co (BID ID -3271909)

K CHANDRAPAL REDDY (BID ID -3277612)

PVRCS ENGINEERS (BID ID -3274378)