CA NO GE/AFJ-72/2023-24 REPAIR/REPLACEMENT OF LT UG CABLE STREET LIGHT OVER HEAD LINE PANEL BOARD FEEDER PILLARS JUNCTION BOXES EXTERNAL WATER SUPPLY SERVICING OF DG SETS TRIMMING OF TREES AND MISC WORKS AT PCDA NC JAMMU UNDER GE AF JAMMU

Amount

Taking out of old unserviceable PVC under ground LT cable of any size and type fixed on pole, wall or laid in floors, trenches, across road crossing etc ,including taking out of cable covers of precast PCC / RCC slab or brick cover etc setting aside serviceable materials in safe custody for reuse and or unserviceable materials consider as schedule of credit complete all as specified and as directed. Note:- i). Dismantling of clamps nuts bolts etc, taking out of GI pipe in cable protection shall be measured and paid separately under respective item of this schedule. ii).Cost for making good the disturbed surfaces of floors / walls in cement mortar 1:3 shall deemed to be included in the unit rate quoated . However cost for making good the disturbed surfaces of roads with PCC and hard core filling is out of scope of this work and shall be measured and paid separately.

Supply , laying , testing & Commissioning UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm, 4 core, with taking down old cable complete all as specified and directed by Engr-in-Charge.

Description all as per srl item No.2.00 here in before but size 16 sq mm, 4 core complete all as specified and directed.

Description all as per srl item No.2.00 here in before but size 25 sq mm, 3.5 core complete all as specified and directed.

Description all as per srl item No.2.00 here in before but size 35 sq mm, 3.5 core complete all as specified and directed.

Description all as per srl item No.2.00 here in before but size 50 sq mm, 3.5 core complete all as specified and directed.

Description all as per srl item No.2.00 here in before but size 70 sq mm, 3.5 core complete all as specified and directed.

Description all as per srl item No.2.00 here in before but size 95 sq mm, 3.5 core complete all as specified and directed.

Supply and laying of DWC (Double wall corrugated) HDPE pipe, ISI marked, IS-14930 Part-II, having outer dia as 77 mm and inner dia as 63mm, with smooth internal surface and profiled external surface for non pressure under ground cable including all connected accessories/fittings such as coupler, 'O' ring, etc. for protection of under ground cable complete all as specified and directed by Engr-in-Charge.

Supply and laying of DWC (Double wall corrugated) HDPE pipe, ISI marked, IS-14930 Part-II, having outer dia as 90 mm and inner dia as 76mm, with smooth internal surface and profiled external surface for non pressure under ground cable including all connected accessories/fittings such as coupler, 'O' ring, etc. for protection of under ground cable complete all as specified and directed by Engr-in-Charge.

Supply and laying of DWC (Double wall corrugated) HDPE pipe, ISI marked, IS-14930 Part-II, having outer dia as 120 mm and inner dia as 103 mm, with smooth internal surface and profiled external surface for non pressure under ground cable including all connected accessories/fittings such as coupler, 'O' ring, etc. for protection of under ground cable complete all as specified and directed by Engr-in-Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in any type of soil for laying of LT UG cables complete. Note:- The Rate quoted deemed to including cutting and removal of PSP Sheets wherever occured during excavation and the same shall be staged at desired location as directed at site complete all as specified and directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers not exceeding 25 cm thick in hard dense soil complete all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M & L for Cutting through existing road surfaces i.e. surfacing PCC soling etc, and making trench of minimum 500mm wide 100cm in depth along the cross section of road for laying of pipes or UG cables, including returning filing in, well ramming & removal of surplus spoil to a distance not exc. 50 mtrs & repairs to road surfaces to match with existing specification after laying the pipes/cable etc. all as specified & directed.

Supply and Fixing GI tubing midium grade 40mm dia using water supply including provisioning of suitable fittting mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles including taking out old broken GI pipes, complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing GI tubing light grade 50mm dia along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles including taking out old broken GI pipes, complete all as specified and as directed by Engr-in-Charge.

S & F LT cable joint kit straight through heat shrinkable complete with jointing materials suitable for LT Armoured cable 4 core of size 10 to 50 Sqmm complete all as specified and directed.

S & F LT cable joint kit straight through heat shrinkable complete with jointing materials suitable for LT Armoured cable 4 core of size 70 to 120 Sqmm complete all as specified and directed.

Supply and fixing aluminium thimbles of size 16 Sqmm in replacement suitable for under ground LT cables of following sizes including cutting of exsting burn/dammaged cable after disconnecting from exsting position ,extending the cable from cable loop including neccesory earth work and reconnecting the same.

Description all as per Item No. 20 but size 25 Sqmm

Description as per Item No. 20 but size 70 Sqmm

Descriptionas per Item No. 20 but size 95 Sqmm

Supply & Fixing PVC insulated sheathed service wire twin core 10 Sqmm aluminium solid conductor 1100 volts grade including taking down old unserviceable one complete all as specified and directed.

Supply and fixing change over switches off-load 400 Amps 4 pole sheet metal enclosure complete all as specified and directed.

Supply and Fixing MCCB 400 Amps 4 pole 36 KA with adjustable thermal and fixed magnetic setting, fixed in repairs complete all as specified and directed.

Supply and Fixing MCCB 250 Amps 4 pole 36 KA with Sheet metal encloser with adjustable thermal and fixed magnetic setting, fixed in repairs complete all as specified and directed.

Supply and Fixing MCCB 200 Amps 4 pole 36 KA with Sheet metal encloser with adjustable thermal and fixed magnetic setting, fixed in repairs complete all as specified and directed.

Supply and Fixing MCCB 160 Amps 4 pole 36 KA adjustable thermal and fixed magnetic setting, complete all as specified and directed.

M & L for Servicing of DG sets of capacity 63 KVA and 320 kVA including carrying out maintenance and check alongwith following repairs :- (i) Drain out the lubricating oil from sump and refilling after proper cleaning. (ii)Replace Engine Oil filter cartridge with New one. (iii)Replace fuel filter cartridge with New one. (iv)Check tightness of all nuts and bolts. (v) Check adjustment of V belt for driving engine water pump and alternator. (v) Cleaning of fuel tank as required (vi) Assembling complete old serviceable parts and replacement of old unserviceable parts by new one as per direction of Engineer-in-Charge. (vii)Testing of DG set after servicing as per Engineer-in-Charge. (viii) Cleaning of air cleaner filter and renew after period two hundred hrs run of DG Set or as recommended by Engineer-in-Charge and contractor shall be responsible to carry out the maint/servecing where require time to time and for which no extra payment shall be permitted. (ix) Any parts required to be replaced during servicing of engine shall be measured and paid for separately. (Note : Service of DG Sets 63 KVA and 320 KVA - 2 Nos. All spare required for replacement shall be supplied under following items).

Note:-(i) Any minor parts such as screws, washers , split pin, clip, cotton waste, etc shall be supplied by the firm, rate for the same shall be deemed to be included in the unit rate quoted. (ii)The Job shall be carried out after two hundred hrs run of DG Set or as recommended by Engineer-in-Charge and contractor shall be responsible to carry out the maintenance/servicing where require time to time and for which no extra payment shall be permitted. (iii) Any parts required to be replaced during servicing of engine shall be measured and paid for separately.

Supply only the following parts suitable for 63 kVA and 320 KVA DG sets: -

Oil filter Cartridge Make: Kirloskar/Greaves/ Cummins/Ruston/Micco/Fleet Guard

Fuel filter Cartridge pre and fine both as required. Kirloskar/Greaves/Cummins/Ruston/Micco/Fleet Guard

Air cleaner filter Cartridge, Make: Kirloskar/Greaves/ Cummins/Ruston/Micco/Fleet Guard

Radiator hose pipe, Make: Kirloskar/ Greaves/ Cummins/ Ruston

Fan belt complete for DG set. Make- Kirloskar/ Greaves/Cummins/Ruston/Fenner

Turbo oil pipe, Make: Kirloskar/ Greaves/Cummins/ Ruston

Fuel pipe heavy duty, Make: Kirloskar/Greaves/ Cummins/ Ruston

Battery terminal of brass heavy duty type as per existing sample complete all as specified and directed.

Solenoid Switch, Make: Kirloskar/ Greaves/TVS Lucas

Oil drain pipe heavy duty, Make: Kirloskar/ Greaves/Cummins/ Ruston

Water pump assy, Make: Kirloskar/ Greaves/Cummins/ Ruston

Copper battery lead 3 mtr long 16mm dia multi stranded, Make: Kirloskar/ Greaves/Cummins/ Ruston

DG set rubber coupling for 63/320 KVA, Make: Kirloskar/Greaves/ Cummins/Dunlop

Supply only Coolant Make- Castrol or As per the recommendation of Kirloskar/Greaves/Cummins

Supply only Turbo lubricant oil 15W-40 Make: Castrol or as per the recommendation of Kirloskar/Greaves/ Cummins

Repair/servicing Self startor 12/24 volts incl replacement of wornout part such as carbon brush, bentex pinion, bushes, carbon brush holder, solinoid and refixng complete set to work of 63 to 320 KVA DG sets

Repairng of battery terminals complete including opening connection ,transportation and re-fixing the in orginal position complete all as specified and directed.

Supply and fixing in repair LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including making electric connections using two run of 1.5 sqmm single core unarmoured wire from junction box, fixed in repairs,CA No also engaved on street light complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in repair LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including making electric connections using two run of 1.5 sqmm single core unarmoured wire from junction box, fixed in repairs,CA No also engaved on street light complete all as specified and as directed by Engr-in-Charge.

Supply and fixing LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including making electric connections using two run of 1.5 sqmm single core unarmoured wire from junction box, fixed in repairs,CA No also engaved on street light complete all as specified and as directed by Engr-in-Charge.

Taking out burnt winding with allied insulation materials of servo stabilizer (50 to 200 KVA) including M&L for rewinding of stabilizer of above capacity with super enamelled copper winding wire of appropriate gauge and cleaning of rust, carbon deposit etc.complete all as specified and as directed by Engr-in-Charge.

Supply and Replacement of electronic sensing control card circuit plate as per sample complete all as specified and directed.

Replacement of dimmer stat 350 Amp Suitable stabilizer complete all as specified and directed.

Supply and replacement of Servo motor of capacity 10 Kg complete all as specified and directed.

Replacement of Carbon Bushes complete all as specified and directed.

Replacement of Copper leads 02 No from Stablizer to main panel complete all as specified and directed.

Top up of transformer oil upto the required level complete all as specified and directed.

Reassembling of voltage stabilizer complete including provn of new gasket making all connections including proper thimbles of appropriate size and testing complete of voltage stabilizer by using out side dimmer unit for low and high out protection complete all as specified and directed.

Supply and pouring transformers oil for transformer 63 to 500 KVA topping with the dielectric strength of 45 KV complete all as specified and directed.

M&L for top cover gasket as per required size of 63 to 500 KVA transformer complete all as specified and directed.

M&L for LT bushing gasket as per required size of 62 to 500 KVA transformer complete all as specified and directed.

Aluminium conductor, steel reinforced of any size on LT Poles including straining,binding with insulators with Al/copper binding wire with insulators as in OH conductors, providing PVC Sleeves for jumper and entire satisfaction of Engr-in-Charge complete all as specified and directed .

Cutting wild grasses,bushes,creepers,unwanted vegetations, etc. from surrounding poles/stays including cleaning cripper climbed on poles as and when directed and removing the spoil and deposit where directed (size of cutting 90x90 cm around pole/stay) entire satisfaction of Engr-in-Charge complete all as specified and directed . Note:- The Item shall be operated maximum three times in the entire period of the contract.

Trimming of tree branches to clear the HT/LT OH lines girth of tree branches exc 25 mm and not exc 50 mm and stacking the materials where directed to a distance not exc 50 mtr and clearing the site upto entire satisfaction of Engr-in-Charge complete all as specified and directed .

Description all as per Item No-68 here-in-before ,but girth of tree branches exc. 51mm and not exc.100 mm.

M& L for removing bore well column pipes upto 150 mm dia with submersible flat cable of any type and dismantling and taking up/down Submersible Pump and Motor assembly of capacity 20 HP, shifting to workshop and removing unserviceable spares, replacing with new spares such impeller, bushes distance bush, seal etc of same specifications / type / model. removing burnt copper winding from motor and rewinding with same guage and type of insulation copper conductor winding wires and insulation sheets , applying insulating varnish over the complete winding , drying up by heating , assembling back and testing for proper function including necessary machining works as required , bringing back and reinstalling into the bore well all as specified and as directed.

20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.

25 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.

40 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.

50 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.

100 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.

Note for item no. 70 to 74 : Excavation and earth work shall be measured and paid separately under relevant items

Supply , laying, jointing & testing of DI Type K-7 pipe, 100mm dia, with socket & spigot ends, with cement morter zinc coated out side as per IS 8329/2000 in standard length suitable for and including push on tyton joints with rubber rings, laid in trenches, including taking up or down old unserviceable water mains (including all fittings), of any type including burning out joints incliding turning water OFF or ON as necessary and taking off and refixing covers, access doors etc.complete all as specified and directed by Engr in charge. Note:- DI/CI specials, excavation and earth work shall be measured and paid separately undder relevant items

M& L for MS/CI/DI fittings such as collar, bends, any type, any dia, any radius, any angle, double end socketted or double flanged or spigot & socket, tail pieces, all socketed or all flanged with an equal & other end tapering bell mouth or flanged plates, connecting pieces straight, both end flanged or socketed of socket & flanged & spigot ends or bell mouth tail pieces, one end flanged & other end spigot or socket or tatering as bell mouth or flanged, caps blank flanges heavy duty suitable for mechanical joint/flanged joint with and including taking down old fitting of any type and any size all as specified & directed by Engineer In Charge Note: Certificate for Weight of fitting by the manufacturer shall be submitted before payment.

M & L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 100 mm bore dia of CI/DI pipe complete all as specified and as directed.

M & L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 150 mm bore dia of CI/DI pipe complete all as specified and as directed.

Gun-metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe of size 20mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge

Gun-metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe of size 25mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge

Gun-metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe of size 50mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge

Bib taps , fancy type cast copper alloy, chromium plated, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule for bore of pipe 15 mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge

Attending day to day emergency breakdowns / complaints of damaged water supply lines of 15 mm to 150 mm bore in distribution system and restoration of water supply by stopping the leakage occured by deputing skilled /semi skilled man power for smooth functioning of water supply, complete all as specified and directed by Engineer-in-Charge. Note : - (a) Up to 0.50 Cum of the earth work shall be included in the job & more than 0.50 Cum shall be measured and paid separately. (b) The complaint / breakdown shall be rectified by the contractor within 24 Hours. Any delay thereafter, recovery at double the rate quoted per job shall be deducted from the dues of contractor by the Enginer-in-charge without any notice. (c) A proper record of complaint slip shall be maintained by the Engineer-in-Charge for making the payment against these items and recovery if any in case of failure of attending and rectifying the complaint within 24 hours. (d) Two pipe fitter and two helper with required T&P shall always be made available for attending complaints.(e) All material such as bends,unions,nipple,tees,sockets and all other items rate includes each job.MES not given any material and not paid separately.

Supply and fixing and testing CI sluice valves, 150 mm dia, both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostatic pressure 15 Kg/Sqcm. (PN 1.6) and confirming to IS 780, including taking out of existing unserviceable valve complete all as specified and directed by Engineer-in-Charge.

Supply and fixing and testing CI sluice valves, 100 mm dia, both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostatic pressure 15 Kg/Sqcm. (PN 1.6) and confirming to IS 780, including taking out of existing unserviceable valve complete all as specified and directed by Engineer-in-Charge.

Supply and fixing cast iron non return valve heavy duty ISI marked, 150 mm bore, with jointing material flanged joint rubber gasket 6mm thick nuts,MS nuts,bolts,washers including taking out of existing unserviceable complete all as specified and directed by Engineer-in-Charge.

M & L for carry out water quality anyalsis for bacterial , chemical and biological analysis including for collection of water samples from Pump house PCDA (NC) as specified by Engineer-in-Charge and testing from Govt approved testing laboratory , submitting of report from minimum following parameters. (a) Free chlorine (b) pH (c ) Total Hardness (d) Total Alkalinity (e) Bacterological standards (f)Chemica standars (g) physical standards (h) copper (i) ch;loride ( of Govt testing lab. Notes: 1. Saparate water samples should be collected & tested for Each location as specified above 2. No payment shall be made to contractor till submission of water test report for the water samples of locations mentioned above

M&L for cleaning of valve pit chamber removing sludge deposited inside chambers,removing sluice valve changing packing rope and also spindle,clearing of all leakages from chamber complete all as specified and directed by Engineer In Charge

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

Note: (1) The repair has to carried out as and when required basis and accordingly site will be available in piecemeal wise and as directed by Enginer-in-Charge in the area of PCDA (NC) under GE (AF) Jammu.

G M ENGINEERING SERVICES

ANIKET TRADERS

M/s Sahib Construction and engineers

MAMTA ENTERPRISES