Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.4 LAccepted-AOC HARIPUSHPA APARTMENT BUILDING NO E 1 FLAT NO 01 REST CAMP ROAD DEOLALI CAMP 422 401 | DEOLALI CAMP | NASHIK | MAHARASHTRA | 422401 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹37.1 L+₹84,521 (2.33%)Rejected-Finance 154 HANUMAN MANDIR DIKSHI TAL NIPHAD DIST NASHIK 422 302 | NASHIK | MAHARASHTRA | 422302 | L2 | Rejected-Finance BEING NOT L1 | |
| 3 | L3₹38.0 L+₹1.8 L (4.99%)Rejected-Finance CHAITALI NIWAS OPP PANCHAMOTI HOUSING SOCIETY VIJAY NAGAR DEOLALI CAMP NASHIK 422401 | NASHIK | MAHARASHTRA | 422401 | L3 | Rejected-Finance BEING NOT L1 | |
| 4 | L4₹40.2 L+₹4.0 L (10.9%)Rejected-Finance | L4 | Rejected-Finance BEING NOT L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
24 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF OJHAR
GE AF OJHAR
CERTAIN REPAIRS AND MISC B/R WORKS AT ADM AND TECH AREA AND REPAIR TO MES INSTALLATION AT 25 ED AT AF STN DEOLALI
2023_MES_599872_1
8981/E8
Open Tender
Civil Works
Item Rate
240 days
OJHAR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF OJHAR
₹90,000
Yes
15 Jul 2023
31 May 2023
27 Jun 2023
1 Jun 2023
24 Jun 2023
12 Jun 2023
Amount
Dismantling of CGI/PGI sheet as in roof covering including ridge .
Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering including ridge..
S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick including rideg of an colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.
S&F pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5 mm thick including rideg of an colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.
Dismantling wrought iron or mild steel work in any description not otherwise provided for.
S & F rolled mild steel angle/tubular/square/rectangular roof trusses (framed), trussed purlins, rails and fastenings and heavy bracket framing, confirming to Fe 410 - W including distance pieces, cleats, etc., complete.
Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars but excluding precast concrete articles etc all as specified & as directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) in ground floors (below or above ground level) not exceeding 15cm thickness all as directed by Engr-in-Charge.
Demolition of Concrete in ground floors and pavings exc 15 cm thickness above ground level al as completed.
Dismantling of stone slab and tiles of any description or thickness in floors aprons etc laid, bedded & pointed in any mortor complete all as specified & directed.
Taking down cement plaster of any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified & as directed by Engr-in-Charge.
M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified
M&L for brick work with old size sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified.
M& L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in Cement mortar 1:6
M& L for Raised pointing in Cement mortar 1:4 to random or polygonal rubble, un coursed or brought upto courses
M & L for rendering 15 mm thick in CM 1 :6 on fair faces of brick work or concrete surfaces and rendering is to be finished even and smooth faced plaster all as specified & directed by Engr-in-Charge.
M&L for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brick work in CM (1:4) finishing the surface even and smooth faced plaster on walls all as directed by Engr-in-Charge.
M&L for Glazed ceramic tiles in vertical surface 450x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 15mm thick bedding layer/ backing coat in CM 1:4 complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tiles exc 0.11 Sqm but n.exc 0.18 set and jointed in neat cement slurry and pointed in white cement with pigment to match over and including 15mm thick in CM 1:6 screed bed complete all as specified & directed by Engr-in-Charge.
M & L for coloured (light shade) vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match and the shade of the tiles including 15mm screed bed or bedding layer CM 1 : 6 .
M & L for coloured (light shade) vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles including 15 mm screed bed or bedding layer CM 1 : 6 .
M&L non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm,(400x200) in skirting etc over and including 10 mm thick bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.
M & L machine cut Cudappah stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M&L for granite (black) of any type work (table rubbed and polished) of 16 to 18 mm thick in steps, jambs, pillars, window cill, cooking platform and like including 15mm thick screed bed/backing coat in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and moulding the edges complete all as directed by Engr-in-Charge
M&L for drilling holes for pipes etc in granite /cadappa n exc 25mm dia
Taking up or down GI tubing 15mm bore and connections from walls and ceiling or laid in floor including cleaning for refixing or removal to store all as directed by Engr-in-Charge
Re-fixing old serviceable steel tubing 15mm bore and supply of new fittings as required at site and fixed in new or old position (walls, ceiling, floors, etc.) all as directed by Engr-in-Charge
S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall, ceiling or laid in floor with suitable clamps & nuts etc all as directed by Engr-in-Charge
Taking up or down GI tubing 20mm bore and connections from walls and ceiling or laid in floor including cleaning for refixing or removal to store all as directed by Engr-in-Charge
Re-fixing old serviceable steel tubing 20mm bore and supply of new fittings as required at site and fixed in new or old position (walls, ceiling, floors, etc.) all as directed by Engr-in-Charge
S&F GI tubing 20mm bore medium grade with all fittings and fixed complete to wall, ceiling or laid in floor with suitable clamps & nuts etc all as directed by Engr-in-Charge
S&F in repairs bib taps 15mm bore cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as directed by Engr-in-Charge
S&F in repairs stop cocks 15mm bore, chromium plated, fancy type screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions with long shank and cup washers all as directed by Engr-in-Charge
S&F in repairs low density polythelene pipes 40mm bore fixed complete to walls, ceiling or in floor all as directed by Engr-in-Charge
S & F in repairs chromium plated fancy type shower rose 75 mm size with swivel joints, any size, including fixing to steel pipe or union all as directed by Engr-in-Charge.
S & F in repairs wash hand basins, vitreous china( flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting stand including waste fitting, brass chromium plated 32 mm size with long screwed shanks and fly nuts and including PVC discharge pipe complete all as specified and directed by Engr-in-Charge.
S & F in repairs waste fittings, brass chromium plated 32mm dia with long screwed shanks and fly nuts fly end bedded in red lead cement and other end fixed all as directed by Engr-in-Charge.
S & F in repairs 15 mm bore dia. of pipe fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.
S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs washers and washers and wastes including waste coupling with pipe, bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed by Engr-in-Charge. Make : Nirali/ Prayag/ Blue Star as approved by GE.
S&F in repairs vitreous china water closet (squatting pan) Orrisa pattern of size 580 x 440mm white with intergral footrests & 'P' trap (excluding flushing cistern and flush pipe) including connection to trap, to flushing pipe etc. complete including PCC for making good to floor etc. complete all as directed by Engr-in-Charge.
S & F vitreous china wash down water closet (Pedestal pattern) white (EWC) including white PVC seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper etc, complete all as specified and directed by Engr-in-Charge.
S & F in repairs white / black PVC seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinge device, complete all as specified and directed by Engr-in-Charge.
S & F in repairs low level flushing cistern of syphonic action type 10 ltr capacity PVC fixed to wall with bracket and screwed including PVC flush pipe complete fitting etc all as directed by Engr-in-Charge.
S&F PVC connection 15mm bore dia.of pipe with PTMT nuts and PVC washers of length 600 mm all as directed by Engr-in-Charge.
S&F in repairs float valve 15mm bore of high pressure, PTMT with epoxy coated aluminium rod and high density plastic ball screwed, for iron pipe and fixed complete all as directed by Engr-in-Charge.
All as per item No. 47 above but 20mm bore pipe complete all as directed by Engr-in-Charge.
S&F in repairs Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 50 gms) all as directed by Engr-in-Charge.
Dismantling unserviceable water tank of capacity n.exc 500 ltr complete all as specified and as directed
Dismantling unserviceable water tank of capacity exc. 500 ltr but n.exc 1000 ltrs. complete all as specified and as directed
S&F Rotational moulded polyethylene water storage tank of 500 ltr capacity (cylinderical vertical with closed top ) hoised and fixed in position all as specified in SSR part I and as directed.
S&F Rotational moulded polyethylene water storage tank of 1000 ltr capacity (cylinderical vertical with closed top ) hoised and fixed in position all as specified in SSR part I and as directed.
S & F in repairs 200 mm long aluminium, anodised, barrel tower bolts of extruded section ISI marked.
S & F in repairs 150 mm long aluminium, anodised, barrel tower bolts of extruded section ISI marked.
S&F in repairs 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed ISI marked.
S&F in repairs 75mm long Butt hinges, medium weight, cold rolled mild steel, and fixed ISI marked.
S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed by Engg. In charge.
S & F in repairs 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
S&F in repair 3mm thick sheet glass ordinary quality and size in any type of frames and glazing with oil putty (or beading) in square n.exc. 0.5 Sqm each including hacking out old broken glass from wooden/steel frames complete all as specified.
All as per item No 60 above but figured glass complete all as specified.
S&F in repairs of door stopper 125 mm size aluminium alloy body and tongue anodized including rubber etc complete ISI marked all as specified and as directed.
S&F in repairs drapery curtain rod of metalic 25mm dia covered with PVC coating complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed by Engineer -in -charge
S&F in repairs 300 mm size aluminium alloy, anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified. Make: Classic/ crown as approved by GE.
All as per item No 64 above but 300 mm mild steel stove enameled black complete incl nut & bolt fixing arrangements all as specified.
S&F in repairs tubular towel rail brass chromium plated,20mm dia, D type,60cm long between flanges ISI marked complete all as specified.
S&F in repairs mild steel spring 200 mm for door, ordinary rat tail rod pattern springs, including roller and roller plate complete ISI marked.
S&F in repairs aluminium Door closer hydraulically regulated (extruded section body), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete and all as specified. Make : Everest / Zip / Natraj / hardwyn as approved by GE.
S&F in repairs hasp & staple ISI marked of 100mm size safety type aluminium anodized, with MS hinge pin including bolt to hinge plate & fixed with screws complete all as specified.
M & L for false ceiling work of pwder coated anodised aluminium snap grid system size 605x605mm for false ceiling with aluminium angles of size 23.5 mmx23.5,,x1.5mm fixed to wall with GI screws and aluminium tee of size 37.5x37.5x1.5mm in main and cross runners fixed 60 cm c/c including 3 mm dia hanging GI wire(upto necessary required length & 1.2 Mtr c/c) fixed to slopping roof (rafter/purlin/trusses) complete all as specified.and tied to existing roof/truss/rafters complete
M & L Non asbestos fibre cement building boards 4 mm thick (one side embosed design), fixed or laid/ inserted to Aluminium grid frame work in ceiling with clips all as specified and directed.
M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, with Fe-410 W grade E-250 quality A drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.
S & F in repairs 32 mm dia bore PVC flexible pipe for wash hand basin complete all as specified.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer all as specified & directed by Engr-in-Charge.
M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer all as specified & directed by Engr-in-Charge
S & F CP health faucet including flexible pipe and MS anodised hanging device all as directed. Make : Jaguar
S&F in repairs angular stop cock with wall flange Make Jaguar all as specified and directed by Engr-in-Charge.
M & L in repair for 18/19 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in cup board shutters, partitions, shelves and similar work including taking down olds shutters/shelves.
M&L for external teak wood lipping, 6mm thick fixed with nails for particle board of 18/19 mm thick
Taking down shutters exc 1 sq. m and n exc 2 sq. m each
Taking down chowkats or frames n. exc.1.5sq m each with shutters (without taking off shutters from the frame).
All as per item No 81 but exc.1.5sq m but n exc 4 sq.m each
S&F factory made solid PVC door shutter 30 mm thick (Style) consisting of frames made out of MS tubes for top and bottom rails MS frame shall be covered with heat noulded plain colour PVC with solvent cement for tiles and plain colour PVC sheets for top rail and bottom rail panellng of plain colour PVC sheet to be fitted in the MS frame welded sealed to the stiles & rails with suitable PVC sheets beading and jointing together with solvent in the frame at site as per specification and drawing
S&F Solid PVC door frame of size 50x47mm made of 5mm plain colour PVC sheet reinforced with MS square tube suppling & fixed in opening as per specification
S & F 40 mm thick Flush shutters, solid core construction, with particle board core and if both faces are covered with decorative face veneer with lipping/frame to match
Taking down carefully existing bitumen tarfelt including plaster and roughning the surface cleaning the surface and removing of the rubbish to a distance exceeding 500m but not exc 1.50 Km and depositing where directed.
10mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement
M&L for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment all as specified here in after :- (a) Bituminous primer @ 0.30liter per sqm conforming to IS 3384-1986 (b) 3mm thick APP polymeric membrane minimum weighing 3 Kg/Sqm of M/S TEXSA Ltd or M/S TIKI Asphalt hydro stop or IWL 3.00kg/sqm membrane (one layer) laid by torch application method with over laps of 100 mm joints of traverse direction and 75 mm at longitudinal direction duly thermofused by flame torch all as specified in application manuel of the company (c) Painting with one coat of bitumin grade 85/25 @ 1.2 Kg/Sqm. (d) Applying two coat of aluminium paint @ 100ml/Sqm
Supply only liquid water proofing compound
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed and removing the material from the site in any mortar all as specified & directed.
Machine cut kota stone in flooring 18-20 mm thick (Pre-mirror polished), over and incl 20 mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and polishing complete and moulding at edge if reqd all as spd and directed.
18-20 mm thick Kota stone tiles (Pre-mirror polished), in riser of steps, skirting,dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles including rounding the edges of kota stone over and including 10mm thick backing coat in cement mortar (1:4), surfaces finished even and rough to receive tiles, all as specified and directed.
M & L for 75 mm thick sub base in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) all as specified.
M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment over 15 mm thick screed bed in CM 1:6
M & L for sand filling under floors or in foundations including watering and consolidation as in levelling coarse for fixing of interlocking tiles all as specified and directed by Engineer-in-Charge.
M & L for machine pressed coloured rubber moulded precast concrete interlocking paver block with pigment any shape and size confirming to IS-15658-2006 of 60 mm thickness, M-35 grade all as specified and directed by Engineer-in-Charge.
M & L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) as in 25 mm thick flooring/roof padding finished even and rough .
M&L 1.6mm thick mild steel, plain black sheet in door shutter, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including sheet welding in frame, bending or turning up, mitred angles, etc. as required
M&L for mild steel roller of existing size approx 10 cm to 14 cm dia including bearing and welding to angle iron door frame and neessary flat iron clamps bolts, necessary greasing and oiling complete all as specified and directed by Engr-in-Charge.
Demolition of reinforced cement concrete (Reinforcement cut as required to facililate demolition) (below or above ground level ) not exceeding 15 cm thickness
M & L for precast reinforced cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with angle frame plain faces and set in cement mortar 1:4.
M&L for preparing old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enemal paint complete all as specified and directed.
Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes, dismantling of existing float valve & re fixing the same after cleaning the water tank, capacity of tank exc. 250 ltr but n.exc 500 ltrs. complete all as specified and as directed
All as per item No 103 above but capacity of tank exc. 500 ltr but n.exc 1000 ltrs. complete all as specified and as directed
All as per item No 103 above but capacity of tank exc. 1000 ltr but n.exc 2000 ltrs. complete all as specified and as directed
Supply only liquid water proofing compound
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complet all as directed.
S & F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plaincolour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications.
5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification.
M&L for 100 mm thick cement concrete type B-2, 1:2:4 (using 40mm graded aggregates) as in path/PCC road/hardstanding and PCC should be laid in alternate ways and the area of one panel should not be exc 10 Sqm/each and finishing the surface of concrete roads/paths/hardstanding by brooming all as specified and directed by Engineer-in-charge.
M &L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A'.
M&L for 50 mm thick Cement concrete 1:3:6 type C1, (20 mm graded aggregate), as in plinth protection, finishing cement concrete surface even and fair without using extra cement complete all as specified.
Fixing only in repairs Asbestos Cement Plain building boards/Non asbestos fibre cement building boards any thickness, fixed to timber/ Aluminium frame work with screws in ceilings.
MAHIMA CONSTRUCTION
M/S KANNANS
M/S Nilesh Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .