Refurbishment of internal electrification of residential quarters (Phase-1) in Anupuram Township.

Amount

Assembling, installation, testing and commissioning of MCB DB enclosure already embedded in the wall including supply of Engraved Circuit Identification Plate and Danger Board as per the detailed specification for the following size of MCB DBs. (Refer Sec VI, Clause No.15.3).

SPN, 12/16 Way or TPN 4/6 Way Distribution Board

SPN, 4/6/8 Way Distribution Board

Assembling, installation, testing and commissioning of MCB DB enclosure already embedded in the wall including supply of Per phase isolation conversion kit as per the detailed specification for the following size of MCB DBs. (Refer Sec VI, Clause No.15.3).

TPN, 8 Way Distribution Board

Supply and Embedment of following sizes of flush mounting POWDER COATED TPN/SPN DB Enclosures with Double Door consisting of Phase, Neutral and Earth Bus and interconnecting wires etc. at suitable depth in brickwork as per the detailed specification and as directed bythe Engineer-in-charge .(Refer Sec VI, Clause No.15.2).

SPN, 8 Way Distribution Board with all accessories, cat No:507611

Supply and Embedment of the following types 50mm Deep, Square/Rectangular Concealed type GI Double earthed modular metal boxes in RCC/Brick/Concrete Block Masonry including removal of existing boxes/MCS, packing with cement mortar, plastering and making good including removal and repulling of the existing wires routed through the box as per the detailed specification. (Refer Sec V & VI, Clause No.15.12 ).

ONE/TWO Module

THREE Module

FOUR Module

SIX Module

Eight Module

Supply fixing testing and commissioning of the following RCCBs on Distribution Boards including removal of existing RCCBs as per the detailed specification.(Refer Sec VI, Clause No.14.2).

RCCB DP 63A sensitivity 30mA, Type-A

RCCB DP 25A sensitivity 30mA, Type-A

RCCB Four Pole 40A sensitivity 30mA, Type-A

Supply fixing testing and commissioning of the following MCBs on Distribution Boards including removal of existing MCBs as per the detailed specification. (Refer Sec VI, Clause No.14.2).

6-32 Amps SP MCB (Type-C)

6-32 Amps Four Pole MCB (TYPE-C)

Supply and Installation of 25 x 12 mm sizes of PVC mini trunking (casing & capping) on walls/Ceiling for routing of Power, Lighting and Telephone wires including all the required accessories like JBs, Coupling, External & Internal Bends, Elbows and end cap as per the detailed specification. (Refer Sec VI, Clause No.29)

INTERNAL ELECTRIFICATION Wiring for lights / fans /sensors/ Timer /Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW / Flo-coated Metal conduits as per the detailed scope of work, including supply of Wires, switches/ sockets, termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the detailed specification.(Refer Sec VI, Clause No.18)

Wiring for Power Points with 2 Runs of 4.0 Sq.mm Copper wires for Phase, Neutral and 1 Run of 2.5 Sq.mm Copper wires for Earth from MCB Distribution Board to Single Phase Metal Clad Socket/Switch/Starter. Note : Average route length Approximately 17 metres

Wiring for Power Points with 2 Runs of 4.0 Sq.mm Copper wires for Phase, Neutral and 1 Run of 2.5 Sq.mm Copper wires for Earth from MCB Distribution Board to Single Phase Metal Clad Socket/Switch/Starter. Note : Average route length Approximately 10 metres.

Wiring with 3 Runs of 2.5 Sq.mm copper wire. Note : (Wiring will be measured in running metre)

Wiring for geyser indication point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm for earth from geyser Point to Indicator Lamp including supply of Indicator lamp and 2 Modular plate. Note : Average route length Approximately 3 metres

Wiring for Exhaust fan point up to 3 Mtr height with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch board to Power point including supply of 3 pin 6A shuttered type Socket, 2Nos. 2 Modular plate and 1 No 10A modular switch. Note : Average route length Approximately 3 metres

Wiring for Power point with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm copper wire for earth from Control Switch Box to control switch box including 10A modular switch & 3 pin 6A, shuttered type Socket, Modular plate. Note : Average route length Approximately 3 metres

Wiring with 2 Runs of 1.5 Sq.mm for Phase, Neutral and 1 Run of 2.5 Sq.mm copper wires for Earth from Switch Box / Pull Box to Lamp Holder/ Ceiling Rose. Note : Average route length Approximately 1.2 metres

Supply and fixing following Modular front cover plate on existing modular metal/plastic boxes etc. as required. (Refer Sec VI, Clause No.15.7).

One/Two module

3 Module

4 Module

6 Module

1 Modular dummy plate

Supply and Installation of following Wiring Accessories as per the detailed specification (Refer Sec VI (MNC), Clause No.5).

1 No 6A Switch on modular plate and termination of wires to the switches

1 No16A Switch on modular plate and termination of wires to the switches

1 No 6A 3 Pin shuttered type Socket on modular plate and termination of wires to the switches

1 No 6/16A 3 Pin combined shuttered type Socket on modular plate and termination of wires to the switches

2 Module Step type Fan regulator on modular plate and termination of wires to the switches

1 No 20 Amps SP C MINI MCB suitable in modular plate and termination of wires to the MCB

1 No 6 A Bell push switch on modular plate andtermination of wires to the switches.

1 No 6 A Two way switch on modular plate and termination of wires to switches

1 No 16A Two way switch on modular plate and termination of wires to switches

1 No Geyser Indicator and termination of wires to the switches.

1 No RJ11 Jack on modular plate and termination of wires

Supply and Installation of Cable TV co-axial socket and termination of 1 Run of Cable TV wire at cable TV Outlet.

1 No. 16A 3 pin heavy duty plug top with indicator and termination of wires to the switches

Supply, transportation, installation, testing and commissioning of 1200mm, 20 Watts LED Batten for wall/ceiling mounting including supply of necessry wooden block, with suitable connecting leads and connector as per the detailed specification.

Supply and installation of 6 A, 230 V, Batten / Angle Lamp Holder along with PVC Junction Linker /PVC Round Holder Sheet as directed by Engineer-in-charge and as per detailed Specification.

Supply, installation of 6 A, 240 V, 3 Plate, Ceiling rose with PVC Junction Linker / PVC Round Holder Sheet as directed by Engineer-in-charge and as per detailed Specification.

Supply and installation of Electronic Calling Bell including removal of existing bell as per the detailed specification and as directed by Engineer-in-Charge.

Supply, installation, testing and commissioning of 230 mm dia medium duty wall mounting Exhaust Fan including supply of stainless steel mesh with aluminium frame along with supply of 3 Core, 1.5 Sq.mm PVC insulated, FRLSH sheathed copper flexible cables of required length, supply and fixing of 6A, 3 Pin, Plug top with indicator, refer Drg No. GSO/ESG/ESD/KTS/EXF/SS GRILL/DRG-02 for SS mesh as per the detailed specification and as directed by Engineer-in-charge.

Supply, Installation, testing and commissioning of following sizes of ceiling Fans and safety steel rope with 3 Core, 1.5 Sq.mm (14/0.3) flexible copper cable including earth connection. Supply and fixing of regulator is not included in the scope of this item. (Refer Sec VI, Clause No.17.1).

1200mm Sweep AC ceiling fan

Supply, installation and testing 6 Watts LED Bulkhead Luminaires with integrated driver unit made of aluminium with suitable connecting leads as per the detailed specification. (Refer Sec VI, Clause No.16.1 for installation).

Supply and Installation of laminated Hylam sheet of 3mm thickness over the boxes and as per the detailed specification.

Removal of electrical accessories from th e houses viz, Tube lights / Ceiling Fans/ Exhaust Fan / lamp Holders and handed over to section store as directed by Engineer in charge and as per thedetailed specification.

Removal of Ceiling Fans/ Exhaust Fans

Removal of Tube Light Fittngs/ Holders

Removal / Rerouting of existing Point wiring viz, AC / "P" Point / "A" Point / Geyser Point for conduit routing / shifting purpose in the houses and handing over of the excess wires to section store as per the detailed specification and as directed by Engineer in charge.

Checking of Pull boxes used for electrical wiring in houses as per the detailed specification.

Type II and III & SA quarters

Type IV and V quarters

Supply and fixing following Modular front cover plate on existing modular metal/plastic boxes etc. as required. (Refer Sec VI, Clause No.15.7).

One/Two module

3 Module

1 Modular dummy plate

Supply and Installation of following Wiring Accessories as per the detailed specification (Refer Sec VI (MNC), Clause No.5).

1 No 20 Amps SP C MINI MCB suitable in modular plate and termination of wires to the MCB

1 No Socket 10 - 25 A , 3 Pin combined shuttered type Socket on modular plate and termination of wires to the switches

1 No 16A Two way switch on modular plate and termination of wires to switches

SRIRAM ELECTRICALS (BID ID -3308355)

GPK ELECTRICALS (BID ID -3309186)

SAS ENTERPRISES (BID ID -3309265)

Bidder Name

SAS ENTERPRISES

RR ENTERPRISES

GPK ELECTRICALS

SRIRAM ELECTRICALS