Loading…
Loading…
Tender Value
Refer Docs
Closing Date
6 Mar 2026, 2:30 pmClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
60 days
Expenditure
General
97
3 conditions · 2 needing a document upload
Supply to be made as per the tender specification/Condition
Bidders who are not OEM, to provide valid OEM Authorization certificate OR Dealership certificate along with offer. Failing which offer may not be considered.
Bidder to provide detailed product sheet and specification sheet of the offer. Failing which offer may not be considered.
27 conditions
[a] Please indicate whether you are registered with any of the following Micro & Small Enterprises (MSE) agencies : District industries Centre[s,KVIC, KVIB, Coir Board, NSIC, Directorate of Handicraft & Handloom or any other body specified by Ministry of MSME.[Name the agency clearly]. If yes, then for availing benefits under MSME Act, should upload valid documents maintained under MSME Act such as NSIC Certificate etc duly marking the tendered item in the certificate. Otherwise, claim for benefits under MSME Act may not be entertained and also indicate whether the Enterprise is owned by SC/ST/Woman. Please upload support of this. [b] If you are not a MSE or a consortia of MSEs formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small Enterprises. [in percent of order value] with further breakup of MSE owned by SC/ST[Information will be provided in percentage terms with 6 fields; Micro owned by SC, ST, Others and Small Industries owned by SC, ST and Others]. Please refer para 15.0 Part B of tender conditions.
[a] All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per the GST Law. Firms must indicate its GST registration number along with their offer. [b] In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, The Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism (RCM) anddeposit the same to the concerned tax authority. [c] The firm should indicate the tariff code (HSN Code) for claiming GST for the tendered item. [d] The offer shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. [e] It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. The Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate, if quoted by the bidder. [f] Wherever, the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the Purchase order or billed. [g] Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax bill as per invoice to match the All inclusive Price as mentioned in the Purchase order. [h] Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.
Railway is not bound to accept/Cancel the lowest or any tender or assign any reason for doing so and Railway reserves the right to accept/Cancel any tender in respect of the Whole or any portion of the items specified in the Schedule annexed (a or Tender Schedule) and the contractor shall be required to supply the same at the rate quoted
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
DELIVERY TERMS: F.O.R. DESTINATION BY ROAD AT CONSIGNEE END.
The Guarantee/Warranty of the item mentioned in the tender is only indicative, the actual Guarantee/Warranty is applicable as per the product specification.
The Inspection clause mentioned in the tender is only indicative, the actual inspection clause is applicable as per the product specification and drawing.
Make in India Preference Policy Please refer para 16.0 Part B of Southern Railway tender conditions uploaded in IREPS.
HSN CODE :Tenderers should mention the HSN CODE of the item and Rate of GST applicable. Firm's GST NO. and Firm's Banker details viz., Name & Address of the Bank Account No.., IFSC Code. and MICR No. in their E-Bid.
For inclusion in this tender, please mail your request to [email protected] with proof of successful performance and certificate.
Purchaser shall have the right to levy general damages on the supplier for failing to comply with the contractual conditions, not by way of penalty, an amount equal to 5% of the value of cancelled quantity.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Inspection by Third party Agency for minimum order of Rs.5,00,000, else inspection by Consignee.
Land Border Condition: Bidder shall confirm to the following declaration [Land Border condition] "I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India. I certify that this bidder is not from such a country or , if from such a country, has been registered with the Competent Authority. I hereby certify that this bidder, fulfills all requirements in this regard, and is eligible to be considered. (Where applicable, evidence of valid registration by the Competent Authority shall be attached.)' along with bid for compliance of Office Memorandum of Department of Expenditure, Ministry of Finance dated 23.07.2020. If such certificate given by a bidder whose bid is accepted is found to be false, this would be a ground for immediate termination and further legal action in accordance with law. In case of non- submission of the above said certificate by a bidder, such bidder's bid is liable to be ignored."
2 locations across Tamil Nadu · 4 Numbers total
Supply of Portable Diesel Driven Welding Generator.
97255904A
97255904A
Open - Indigenous
Goods
Tamil Nadu
₹0
Exempted
6 Mar 2026
20 Feb 2026
2 items · 4 Numbers total
Supply of Portable Diesel Driven Welding Generator of any make similar to Crux weld model no. DS23 00 with specifications of 4/3/2 wheel mounted, Minimum / Maximum welding current 40/400 Amps, welding rod dia meter 2.5 to 5 mm, compatible for Shielded Metal Arc Welding (SMAW) process, battery start Diesel engine of powe r approximately 20 BHP and diesel tank capacity 15Lit, approximate size 480 x 1000 x 600 mm, water cooled, Auto shut off in low lub oil pressure and high coolant temperature with accessories includes flexible welding cable with in sulated Electrode Holder and plug set, earthing cable with clamps, Protection mask with colored glass, control panel contains DC Ammeter, DC Voltmeter, Amperage Adjust Control, Amperage Range Switch, Amperage Adjust Switch a nd Remote Amperage Adjust Receptacle, Engine Oil Pressure Gauge, Battery/Voltmeter, Engine Coolant Temperatu re Gauge etc." [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 la cs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/LOCO/ONR, SR | Tamil Nadu | 2.00 Numbers |
| Total | 2 Numbers | |
Supply of Portable Diesel Driven Welding Generator of any make similar to Crux weld model no. DS23 00 with specifications of 4/3/2 wheel mounted, Minimum / Maximum welding current 40/400 Amps, welding rod dia meter 2.5 to 5 mm, compatible for Shielded Metal Arc Welding (SMAW) process, battery start Diesel engine of powe r approximately 20 BHP and diesel tank capacity 15Lit, approximate size 480 x 1000 x 600 mm, water cooled, Auto shut off in low lub oil pressure and high coolant temperature with accessories includes flexible welding cable with in sulated Electrode Holder and plug set, earthing cable with clamps, Protection mask with colored glass, control panel contains DC Ammeter, DC Voltmeter, Amperage Adjust Control, Amperage Range Switch, Amperage Adjust Switch a nd Remote Amperage Adjust Receptacle, Engine Oil Pressure Gauge, Battery/Voltmeter, Engine Coolant Temperatu re Gauge etc." [ Warranty Period: 12 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 la cs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/CnW/SA, SR | Tamil Nadu | 2.00 Numbers |
| Total | 2 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .