WELCOME MAINT AND PERIODICAL SERVICES TO MD AND OTM ACCN AT AUNDH MIL STATION UNDER GE MH AND RH KHADKI

Amount

M&L preperation of old surfaces and applying of one coat of oil bound distemper all as specified and directed by Engr-in-Charge.

All as per item No 01 above but for applying two coats of oil bound distemper on walls.

All as per item No 01 above but for applying one coat of cement base paint on walls.

All as per item No 01 above but for applying of two coats of cement base paint on walls.

All as per item No 01 above but for applying of one coat of dry distemper on walls.

Complete removal of existing treatment on old wall & M & L for applying two coat of oil bound distemper over a coat of primer over minimum 1 mm thick wall care putty.

M&L preperation of old surfaces and applying one coats of white wash on walls.

M&L preperation of old surfaces and applying one coat of white wash on ceiling.

M&L preperation of old surfaces and applying one coats of synthetic enamel paint on old steel surfaces of any descripton exc 10cm with or girth.

M&L preperation of old surfaces and applying one coats of synthetic enamel paint on old wooden surfacess of any description exc 10 cm width or girth

S&F in repairs powder coated aluminuium pipe 20 mm dia as in curtain rod fixed to brakets all as specified and directed Note : Brakets shall be measured and paid separately.

S & F in repairs powder coated aluminium brakets for curtain rods all as specified and directed.

Taking down shutters of any description exc. 1 and not exc. 2 sq. m each

M&L for complete removal of existing treatment, preparing the surfaces and applying two coats of Finishing existing floor chequred tiles/interlocking tiles with Premium Acrylic Smooth exterior emuulsion paint including cleaning the site complete.

S & F 30mm thick flush shutters,solid core construction with block boards core and plywood face panels, commercial type on both sides all as specified

S & F 35mm thick factory made IInd hard wood plain , framed , panelled shutter ( 2 panel ) with lock rail and panel commercial ply or 12 mm veneered particle board withof 9 mm B.W.P commercial veneering on both faces.The size of rail and stile as per IS:1003 ( part-I ), kiln seasoned and chemically pressure treated.

S&F of 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

S&F aluminium powder coated window sliding type (3 track) with frame size100 x 35x1.2mm and shutter 39.40x17.70x1.2mm with tow glass shutter & one mesh shutter incl necessary jointing cleats cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with 4mm plain float glass & 0.56 mm dia SS wire mesh, fittings etc including taking down old steel window of complete all as specified.

S&F aluminium louvered ventilators of section size 100mmx25mmx1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. including taking down existing steel ventilator all as directed by Engr-in-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottom rail. MS frame shall be coverd withheat moulded plain coour PVC 'C' channel having a PVC sheet strys of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for toprail and bottom rail panellinn of plain colour PVC to be fitted in the ms frame welded/ sealed in the stiles and rail with suitable PVC sheet and loading and jointed together with solvent cement, supplying and fixing in the frame at site all as disated by Engineer -in -charge.

S & F in repairs125 mm size extruded aluminium alloy handles,fabricated type anodised.

S & F in repairs aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 150mm

S & F in repairs aluminium alloy , anodised , sliding door bolt with hasp , staple ( bolt type ) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy & fixed - length of bolt 200 mm

S & F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden shuters.

S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden shuuters.

S&F in repairs 100 mm mild steel butt hinges medium weight, cold rolled mild steel and fixed all as spesified

M & L for two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces of 10cm width or girth.

M & L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of girth or width exc 10cm incl preparation of surfaces.

S&F in repairs Prelaminatd particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as sepcified and directed.

S&F in repairs 40 mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised all as sepcified and directed.

S&F in repairs Hasp and staple 150mm long, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

S&F in repairs 75mm long aluminium, anodised, barrel tower bolts of extruded section and fixed.

S&F in repairs 100mm long Aluminium handles cast type anodised.

S & F in repairs cloth drying pulley system 6 feet long with alominium of respective size and all fitting material like channel, pilley, rope, locks, consumables etc. Make: Easy dry or equavalent as approved by GE

S&F in repairs bathroom cabinet mirror (of approved pattern) of size 450mm x 350mm regular size with mirror and PVC shelves complete all as specified and directed by Engineer-in-Charge.

S&F in repair plate rack made of stainless steel 1mm thick kitchen including fixing overall size 915mm x 915mm x 255 mm all as specified.

Demolition stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar.

M&L coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed in CM 1:6 all as specified.

All as per item No 38 above but size exc 0.11 sqm but not exc 0.16 sqm all as specified and directed

M&L Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick plastering in cm 1:4 all as specified.

M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed in CM 1:6 all as specified.

S & F Vitrified ceramic coloured tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding in layer in cement mortar 1 :6 , set and jointed in neat cement lsurry and pointed in white or coloured cement to mathch the surfaces of tiles.

All as per item No 42 above but in skirting/dado over 10mm thick rendering in CM 1:4 finished even and fair

M&L for Granite slab 20 mm thick as in kitchen slab, steps etc machine cut bedded and jointed with grey cement and pointed and adhesive of pigment to match the shade incl cutting and polshing/rounding edges laid over 15 mm thick screed in CM 1:6 as directed by Engr-in-Charge.

M&L for 20-25mm thick machine cut cuddappah stoneas in slab flooring over cement screed bed laid and jointed with grey cment slurry mixed with pigment to match the shade of the slab incl grinding polishing laid over 15 mm thick screed in CM 1:6 complete all as specified.

Material and labour for grinding and polishing of terrazzo floor with machine.

Dismantling water tanks of capacity exc 250 litres but n exc 500 litres and removing to store all as specified

Dismantling water tanks of capacity exc 500 litres but n exc 1000 litres and removing to store all as specified

S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litre hoisted and fixed in position as specied an directed.

S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 litre hoisted and fixed in position as specied an directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

S & F 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors.

Fixing only tubes of 15 mm bore, any grade, to walls and ceiling or laying in floors.

S & F 20 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors.

Fixing only tubes of 20 mm bore, medium grade, to walls and ceiling or laying in floors.

S&F in repairs wash basins, vitreous China (flat back or angle back type) size 580 x 450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing and supply of waste pipe all as specified

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)

S&F in repairs Plastic water closet seat cover (any colour) closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device all as directed.

S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

S&F in repairs Health faucet brass chromium plated with connecting decorative pipe including all accessories required for fixing of 15 mm bore of pipe all as directed.

S&F in repairs 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified.

S&F in repairs 15mm dia fancy type stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repairs Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed to bore pipe 15mm all as specified

S&F in repairs 15mm bore brass with CP central hole basin mixer without popup waste system with 450mm long braided hoses fittings complete all as specified and directed ( Make : Seiko/Cera/Parko)

S&F in repairs 15mm dia bore fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs CP two way bib taps screwed for iron pipe 15 mm bore and fixed necessary fitting with and incl PVC connection all as specified and directed

S&F in repairs PVC waste outlet pipe for kitchen sink complete all as specified and directed.

S&F in repairs Sink Mixer with Swinging Spout (Wall Mounted Model) With Connecting Legs & Wall Flanges Make: Seiko/Cera/Parko

S&F in repair tubular towel rail 20mm dia, D type 60cm long between flanges brass chromium plated, all as specified and directed.

S&F in repairs Chromium plated shower roses with or without swivel joints, 125mm including fixing to steel pipe or union

M & L for complete scraping down of old decorative surface of walls with steel wire brushes of smoke spots, moulds, moss efflorescent salts including filling of spots with POP/ wall care putty and making smooth surfaces and applying 3mm thick layer of wall care putty, two coats of oil bound distemper over a coat of primer all as directed.

M&L for complete removal of existing surface, preparation of old painted surfaces of walls and applying two coats of plastic emulsion paint over a coat of primer on wall surfaces.

M&L for complete removal of existing treatment, preparing the surfaces and applying two coats of Finishing walls with Premium Acrylic Smooth exterior emulsion paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)® upto 4 storey complete all as specified and directed.

All as per item No 74 above but for applying one coat of synthetic enamel paint on old concrete/plastered surfaces.

M & L applying one coat of aluminium paint on steel and iron surfaces of any description over 10cm in width or girth not otherwise described incl., preparation of old painted surfaces.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high using specific brush complete all as directed by Engr-in-Charge.

M&L for writing or marking stops, commas, short lines, dashes, hyphens, brackets, etc using specific brush complete all as directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls, ceilings etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M & L for 10 mm thick plastering on fair faces of brickwork or concrete surface in CM 1:6 with sagol finish surface complete all as specified and directed by Engr-in-Charge

M & L applying two coat of oil bound distemper over a coat of primer to newly plastered surface including preparation of new plastered surfaces to wall complete all as specified and directed.

M & L 15 mm thick rendering on fair faces of brickwork / concrete surface on wall in CM 1:4 using WPC @ 3% by weight of cement, all as specified and directed Note:- WPC shall be measured seperately.

M & L applying two coats of cement base paint to newly plastered surface of wall including preparation.

Supply only integral waterproofing compound, all as specified and directed.

M&L for 10 mm thick plastering in CM 1:4 on ceiling surfaces including a thin layer of sagol finished even and fair complete all as specified and directed.

M & L applying three coats of white wash to newly plastered surface of ceiling including preparation.

M&L for removing peepul plant or any type of plant/vegetations with root from wall, roof slab, over head tank portions, shafts, rain water pipe portions etc, and applying suitable chemical (Sumitomo Excel Mera 71 or quivalent) to the affected area to arrest further growth and making good damaged portions with PCC 1:2:4 all as directed. Note : Rate quoted by contractor shall deemed to be include Safety precautions like rope, safety belts, helmets, ladder etc shall be responsibility of contractor

S P DEVELOPERS (BID ID -3089702)

A B S ENTERPRISES (BID ID -3089573)

agarwal and company (BID ID -3089336)

MAHESH DADAJI BACHHAV (BID ID -3088763)

S.R.M.K Enterprises (BID ID -3088729)