01/KSGH/UD/2025-26

Amount

Toilet Block

Earth work in excavation of foundation trenches or drains, all sorts of soil (including mixed soil but excluding aterite or sandstone) including removing, spreading or the spoils within a lead of 75 m. as directed. The includes necessary trimming the sides of trenches, , dressing and ramming the bottom, bailing out as required complete. (a) Depth of excavation not exceeding 1,500 mm.

Hire and labour charges for shuttering with centering and and necessary staging upto 4 m using approved stout props thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. f) 25 mm to 30 mm shuttering without staging in foundation

In Ground Floor f) 25 mm to 30 mm shuttering with Stating in foundation

f) 25 mm to 30 mm shuttering with Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction SAIL/ TATA/RINL In Ground Floor

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. (a) Pakur variety In Ground Floor

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and einforcement if any, in ground floor as per relevant IS codes (a) Pakur variety In Ground Floor

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) In Ground Floor

Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (b) 15 mm thick plaster

(c) 10 mm thick plaster

Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5mm (± 0.2 mm) made out of single piece extruded PVC profile, with mitred cut joint sand joint with 2 nos. of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 mm x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20mm M.S. rectangular tube of 0.8 mm, including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The doorframe to be fixed to the wall using 8 x100mm long anchor fasteners complete, all as per manufacturer"s specification and direction of Engineer -In-Charge

35 mm thick factory made Solid panel PVC Door shutter made out of single pieceextruded solid PVC profiles, 5 mm (± 0.2mm) thick, having styles & rails (except lock rail) of size 95 mm x 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitred cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5mm thick solid PVC Lock rail of size 115 mm x 35 mm x 35 mm, out of which 95 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 8 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in- charge.

a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs (i) Grill weighing above 16 Kg./sq. mtr.

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). White

Supplying, fitting and fixing 10 litre porcelain low-down cistern It. No.-1 of vol-II of approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings. White

Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (ii) 550mm X 400mm Size

Supplying, fitting and fixing pedestal of approved make for wash basin white (ii) 550mm X 400 mm Size

Supplying ,fitting and fixing approved brand P.V.C. CONNECTOR flexible, with both ends coupling with heavy brass C.P. , 15 mm dia. iii) 600 mm long

Supplying, fitting and fixing bib cock or stop cock. (ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical/ Sumthing Special of ESSCO or similar brand)

Supplying, fitting and fixing towel rail with two brackets (a) C.P. over brass (i) 25 mm dia. and 450 mm long

(c) Chromium plated Hand shower 70mm dia Round Shape Single flow with Flexible Tube & fittings(Equivalent to Code No. ESH-5512 & Model - Tropical/Sumthing Special of ESSCO or similar).

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iii) 600 mm long

Supplying, fitting & fixing H.C.I. bend with door conforming to 1.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. (a) With valamoid joints including sealing the top with cement mortar (4:1) (i) 150 mm dia.

Supplying, fitting and fixing C.I. round grating. (i) 100 mm

Supplying, fitting and fixing soap holder. (a) PTMT (Prayag or equivalent)

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (ii) 750 mm long

f) (ii) CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand).

c) CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR or equivalent)

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (vii) 25 mm dia

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm

Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 450 mm X 350 mm

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer 500 litre capacity

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS: 13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materalls (Spun Yarn, Valamold/Bitumen/M-Seal etc) complete. A) UPVC Pipes: (1) 75 mm. Dia. Metre

(ii) 110 mm. Dia.

Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type) of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4: 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4: 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. (iii) For 20 users B) With Bazree (N.B Varity). (SAIL/TATA/RINL)

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type) of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. (Other than SAIL/TATA/RINL)

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative wall

Floor

White washing including cleaning and smoothening surface thoroughly. (b) Two coats

1st Floor

125 mm Th.Brick work with cement mortar (1:4) in all floorer

Ordinary Cement concrete (mix 1.1.5:3) with graded stone chips (20 mm nominal Size) excluding shuttering and reinforcement if any in ground floor as per relevant IS codes In 1St floor River bazree

Hire and labour charges for shuttering with centering and necessary staging unto 4 m using approved stout props and thick hard wood plants of approved thickness lintel cured or straight including fitting. Fixing and striking out after completion of works (unto roof of ground floor) (a) 25 mm. to 30 mm. thick wooden shuttering as per (b) Steel shuttering or 9 to 12 mm. thick approved quality ply board shuttering in any concrete work (a)Extra for works beyond the roof of ground floor per additional floor.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary). cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as and raking out joints or roughening of concrete surface, threading. Nosing and drip course where necessary (ground floor) (1) With 4.1 cement mortar a) 20 mm thick plaster

b) 15 mm. thick plaster

(ii) With 4.1 Cement Mortar b)10 mm thick plaster

Wood work in door and window frame fitted and fixed complete including a protective coat of painting at the contact surface of this time (The quantum should be corrected unto three decimals(i) Sal

Panel shutters of door and window as per design having tongued and groove half lap jointed as per direction of the Engineer-in-charge including fitting and fixing shutter in position,bt excluding the cost of hinges and other fittings in ground floor (i) Shutter with 35 mm. thick shutter 19 mm thick panel (g)Champ,Panisaj,Badam, Hallak, Sisu

Artificial stone in floor, dado staircase etc with cement concrete (4:2:1) with stone chips land in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement slurry before flooring works. Using cement a 175 kg/sq.m. all complete including all materials and labour. In ground floor 3 mm. thick topping (High

M.S clamp for fixing door and window frame made of flat bent bar, end bifurcated, fixed in cement concrete with stone chips (4:2:1) fitted and fixed complete as per direction. (Cost of cement concrete will be paid separately) (a) 40 mm x 6 mm above 250 mm. unto 350 mm length

Iran butt hinges of approved quality fitted and fixed with steel screws, with ISI mark (viii) & (v) Door D

Window

Iron socket bolt of approved quality fitted and fixed complete. (b)& (d) Door D

Window

Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S specification (1.S. 2681/66) fitted and fixed complete

(a) M.S. or W.I. ornamental grill of approved design joints continuously welded with MS. WI flats and bars for windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor (Add extra @ 1% for each addl. Floor unto 4th floor and @ 1.25 % for each addl Floor above 4th floor) (i) Grill weighing above 10 kg/sq m an uplo 16 kg /sq m.

thick in wall, dado, window, sills, floor etc.

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification (iii) Two coats

Priming one coat on timber, plastered or on steel surface with synthetic enamel / oil bound primer of approved quality including smoothening surface by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. on the surface if necessary. a) on timber or plastered surface iv) Two coat (with any shade except white)

b) Steel or other metal surface iv) Two coat (with any shade except white)

SRAMAJEEBEE CO OP LABOUR CONTRACT AND CONSTRUCTION SOCIETY LIMITED (BID ID -6367225)

Discovery Co. Operative Labour Contract and Construction Soc. Ltd. (BID ID -6367287)