Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.8 LAccepted-AOC 1010 NANDANPURA BABINA CANTT DIST JHANSI 284401 | BABINA CANTT | JHANSI | UTTAR PRADESH | 284401 | L1 | Accepted-AOC Being a L1 bidder | |
| 2 | L2₹39.7 L+₹57,833.75 (1.48%)Rejected-Finance | L2 | Rejected-Finance Other than
lowest
bidder |
Tender Value
₹49.9 L
EMD Value
₹1 L
Closing Date
9 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BABINA
GE BABINA CANTT 284401
CERATAIN MISC MINOR, REVENUE AND SPECIAL REPAIR WORKS AT AGE B/R-II AND AGE E/M UNDER GE BABINA
2022_MES_562198_1
GE/BAB/TOKEN/49 OF 2022-2023
Open Tender
Civil Works
Item Rate
180 days
GE BABINA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE BABINA
₹1 L
Yes
6 Apr 2023
10 Nov 2022
12 Dec 2022
10 Nov 2022
9 Dec 2022
25 Nov 2022
Amount
Dismantling asbestos cement , galvalume , fiber sheet ( Plain , corrugated , semi corrugated ) complete all as specified and as directed.
S&F pre painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed to purlins with self tapping/SD screws complete all as specified and as directed.
S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by engineer in charge.
M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in surface channels and drains including use and waste of formwok where necessary etc complete all as specified and as directed.
Demolition of brick work or stone boulder masonry, built in cement mortar as in quins arches, pillers, parapet etc but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.
M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 etc complete all as specified and directed.
M&L for cement concrete work in pavement/hard-standing of flexural strength 40kg/per square centimetre in field using 400 kg of cement per cubic metre,thickness of concrete 25 cm or less complete all as specified and directed.
Demolition of PCC of any description and in any position etc complete all as specified and as directed
M&L for 75mm thick cement concrete 1:3:6 type C-1, (using 20mm graded aggregate) as in plinth protection/path laid in alternate panel, joint filled with bitumen 85/25, surface finish even and fair without using extra cement etc complete all as specified and as directed
M&L for 75mm thick cement concrete 1:2:4 type B-2, (using 40mm graded aggregate) as in sub base of floor/hard standing finished even and fair etc complete all as specified and as directed
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n exc 1.5 Sqm each etc complete all as specified and as directed
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directed
M&L two coats of synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed.
M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound complete all as specified and as directed.
M&L 40mm thick damp proof course in cement concrete 1:2:4 type B0 (Using 12.5mm graded stone aggregate) to horizontal or vertical surfaces including necessary formwork etc complete all as specified and as directed.
S&F galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed
Taking down cement plaster on brick or stone wall including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of conc/brick surfaces in CM 1:6, finish even and smooth without using extra cement complete all as specified and as directed.
M&L, Preparing new plastered/unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
M&L, Preparing new plastered/unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed..
Surface excavation n.exc 30cm deep, averaging 15cm depth and getting out in soft/loose soil complete all as specified and directed.
M&L, PCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring,mass concrete for pole complete all as specified and directed.
M&L, sand filling under concrete interlocking paver block including watering & consolidation etc complete all as specified and as directed.
M&L 60 mm thick machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006, M-40 grade with grey cement & pigment etc complete all as specified and as directed.
M&L, for PCC 1:3:6 type C-1 using 20mm graded stone agg as in coping/ kerb/coping for pole complete all as specified and as directed.
Surface excavation n.exc 30cm deep, averaging 15cm depth and getting out in hard/dense soil complete all as specified and directed.
Supply only Integral waterproofing compoundt etc complete all as specified and as directed.
M&L for providing M-25 design mix reinforced cement concrete as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for providing M-25 design mix reinforced cement concrete as in beam, cantilever, lintel over 1.5m span and the like complete all as specified and directed.
M&L for providing M-25 design mix reinforced cement concrete as in foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass and the like complete all as specified and directed.
M&L for providing M-25 design mix reinforced cement concrete as in Chajja and the like complete all as specified and directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtrs in depth and getting out in any type of soil complete all as specified and directed.
Returning, filling in including spreading, leveling , watering and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and as directed.
Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.
M&L for brocken stone hardcore of gauge n exc 63mm, deposited, spread and levelled in layer n exc 15 Cm thick, watered and well rammed to true surfaces etc complete all as specified and as directed
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc.complete all as specified and as directed
Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto etc complete all as specified and as directed
S & F 32mm dia Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm etc including composite fittings such as elbows, tees, reducer etc complete all as specified and as directed
S&F 12mm thick toughened glass door fancy type with making logo etc with all fittings fixtures such as stainless steel handles, stainless steel chrome finish hinges, rebber beading, floor spring etc including making good the existing surfaces complete all as specified and as directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed.
S&F 15mm bore cast copper alloy chromium plated, fancy type angle stop cock long thread with flange complete all as specified and as directed.
S&F 15mm bore fancy type chromium plated bib cock long body with flange complete all as specified and as directed.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar including packing under and haunching against sides of pipe of internal dia 150mm complete all as specified and as directed.
S&F CI floor trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified and as directed.
Demolition of cement concrete(reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M & L for preparation of new plastered surfaces of wall and applying two coat of oil bound distemper including chalk whitening on plastered surfaces preparatory to distemper complete all as specified and as directed by the Engineer-in-Charge
S&F stainless steel sink with drainage board 1.00mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete all as specified and as directed.
M&L for toping layer of precast machine pressed cement concrete chequred tiles of size 20cm x 20cm x 25 mm thick laid in neat cement slurry over and including 15 mm thick cement mortar screed in 1:6 over 25mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate and joints between the tiles to be filled with grey cement and no pigment complete all as specified and directed.
S&F rolled mild steel stairs (framed) including stringers, treades, landing,balusters, hand rails etc. including cleats, brackets, etc.complete all as specified and direcetd.
Supplying, fixing, jointing and testing 20 mm dia bore galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in trenches/floor complete all as specified and as directed
M&L for towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) etc., complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brickwork or concrete surfaces, mixed with water proofing compound, surface finish even and smooth without using extra cement in CM 1:4, complete all as specified and as directed
M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with floor etc including 15 mm screed bed with CM(1:4) complete all as specified and as directed.
M&L for glazed ceramic coloured tiles 300x600x10mm thick in Skirting/Dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with floor etc and icluding rendering 10 mm thick on fair faces of wall or conc surfaces in CM 1:4 finished rough for wall tiling etc complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.complete all as specified and as directed by the Engineer-in-Charge.
M&L for solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.
Excavating over areas, n exc 1.5m deep and getting out in soft/loose soil etc complete all as specified and as directed.
M&L for brick work with fly ash bricks (FASB) conforming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radius in half brick thick wall, built in cement mortar 1:4 etc complete all as specified and directed.
Formwork to soffits of roof slab and similar work etc thickness not exc 200mm thick complete all as specified and directed.
Form work to sides and soffit of beams, lintel band/beam, shelves rough finish surfaces of concrete complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.
M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending for columns, hooking for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups , cut to length, bent to shape required, including cranking, bending for columns, hooking for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. complete all as specified and directed.
M&L,RCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) in slabs supported on walls, beams & columns complete all as specified and directed. (reinforcement to be measured separately) and complete all as specified and directed
M&L for Filling Moorum / red bajri in floors, laid in layers n exc 15 cm thickness spread , levelled , rammed inc watering and complete all as specified and directed
M&L for glazed ceramic coloured tiles 300x200x7mm thick in Skirting/Dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with floor etc and icluding rendering 10 mm thick on fair faces of wall or conc surfaces in CM 1:3 finished rough for wall tiling etc complete all as specified and as directed.
S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed
Excavation in trenches exceeding 1.5mtr but not exceeding 3.0 mtr in depth and not exceeding 1,5 mtrs in wide and getting out in any type of soil complete all as specified and directed.
S&F 500 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked or make specified, two layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting with ball valves 20mm PTMT complete (min weight 210 gms complete all as specified in SSR Part -I complete all as specified and as directedcomplete all as specified and directed.
M&L Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate 75mm thick in sub bases of floor/paving and complete all as specified and directed
M&L for rendering 15mm thick on other than fair faces of brick or concrete surfaces of wall, finish even and smooth finish without using extra cement in CM 1:6, complete all as specified and as directed
M&L renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cment complete all as specified and as directed.
M & L for complete removal of existing treatement and applying two coats of cement base paint on external wall surface over a coat of alkali resistant primer complete all as specified and as directed.
M&L for precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate) as in cover slabs for manholes etc set in cement mortar 1:6 including necessry formwork complete all as specified and directed.
Cutting salt glazed stone ware drain pipe in position including jointing socket ends of new pipe to same with packed spun yarn and joined with cement mortar 1:1 for 150mm internal dia of pipe complete all as specified and as directed.
Cleaning of manholes of depth n exc 1.5m deep mechanically or manually by taking off sludge, waste soil and silted soil from the existing manhole of any size and removing the sludge to a distance exc 1.50KM but n exc 2.00KM in sealed container and depositing the same complete all as specified and directed.
M&L for 50mm dia galvanised iron pipe complete with fittings and laid in trenches/fixed with poles etc as protection to cables complete all as specified and as directed.
Dismantling timber scantling , framed /un framed work of 40 sq. cm and over in section in any position complete as directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 complete all as specified and as directed.
S & F mild steel work in hand rails, half round or other steel section in wind ties for roof including securing bolts, post and struts cutting tops to shape as directed, drilling holes, notching for wire etc and similar work conforming to Fe-290 Gde-165 complete all as specified and as directed.
S & F of framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.
Supplying, fixing, jointing and testing 15 mm dia bore galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in trenches/ floor complete all as specified and as directed
S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed
S & F 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
S&F for vitreous china wash basin white angle back size 400x400 mm fixed to wall including cast iron cantilever brackets,cutting for and pinning in ends of brackets connection to supply and waste pipe fixed in concrete type( B-1 )1:2:4 and complete all as specified and as directed
M & L preparing of new surfaces and applying two coat of oil emulsion distemper on walls indluding 1mm thick putty complete all as specified and as directed.
M & L preparing surfaces of wall by complete removal of existing treament and applying two coat of oil emulsion distemper on walls complete all as specified and as directed.
S&F 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed
S&F in repair PVC waste pipe with 32 mm bore and 65 cm long with cap complete all as specified and directed.
Dismantling of wall and celling board ( fiber, pulp, insulation, etc.) or insulated boards/slabs/blankets any thickness, including cover fillets complete all as specified and as directed.
S&F of anodised aluminium snap grid frame work for false celing all as specified and hangers 6mm dia GI adjusting level fixed to roof slabs by means of celling cleats made out of GI flat 40mm X 3mm size 60mm long complet all as specified.
M&L for for 4 mm thick high pressure steam cured non asbestos fiber cement designer board of size 600mm x 600mm as in ceiling complete all as specified and directed with and including aluminium anodised snap grid frame complete all as specified and as directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed.
Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and as directed.
S&F of 35mm thick 2nd class Hard wood paneled door shutter factory made (two panel) with lock rail andpanel of 9mm thick BWP commercial ply wood, the size of rail and stile is as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F factory made fabricated 35 mm thick IInd class skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed
S & F butt hinges medium weight cold rolled, mild steel and fixed 100 mm size etc complete all as specified and as directed.
Supplying, laying, jointing and testing salt glazed stone ware150 mm drain pipe grade ‘A’ laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed
S&F mild steel flat iron 25x3 mm as in hold fasts etc all as specified, Confirming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.
S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed
M & L PCC 1:3:6 type C2 using 40mm gd stone aggregate as in bed drain pipes packing under hauching against sides of pipe 150mm dia after they are laid and tested complete all as specified and directed.
S&F, 150mm floor door stopper aluminium alloy body complete all as specified and directed.
M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed
S & F in repair steel window with Z sections , side hung shutters including Box type hinges with steel handle peg stay, glazing bar, dovetailed or welded for recieving glass after and including taking out unserviceable steel window complete all as specified and as directed.
S & F in repair steel window with Z sections , side hung shutters including Box type hinges with steel handle peg stay, without glazing bar, dovetailed or welded for recieving glass after and including taking out unserviceable steel window complete all as specified and as directed.
S & F 3 mm thisk sheet glass, ordinary quality and glazing with oil putty in squareb n. exc 0.50 sqm in each plane complete all as specified and as directed.
M&L framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 complete all as specified and as directed.
Demolition of cement concrete (unreinforced )in ground floor and paving n,exc 15cm thickness below or above ground level)complete all as specified and as directed
S&F for mild steel plates, plain of any thickness, square cut or notched including forming holes as required at site and including welding if required etc complete all as specified and as directed.
M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other and grouting in RCC columns including nut and washers etc n exc 5cm long etc complete all as specified and as directed. Note:- Dia and length of bolt shall be as per site requirement but not less than 16mm dia and 250mm long complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate ) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and as directed.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali registant primer on external surfaces etc complete all as specified and as directed.
M&L for excavating in post holes (or similar holes) each n exc 0.5cu. m, getting out , returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil etc complete all as specified and as directed.
M&L rendering 15 mm thick in cement mortar 1:4 on surface other than fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L 80 mm thick machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006, M-40 grade with grey cement & pigment etc complete all as specified and as directed.
M&L for 1.6mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.
Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store complete all as specified and as directed.
M&L for glazed ceramic coloured tiles 300 x 600 x 10 mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc complete all as specified and as directed.
S&F in repair PVC floor trap size 75mm dia out let with grating including connection to waste pipe with cement jointing including taking down existing trap complete all as specified and directed
S&F in repaire One piece closetTwin flush system, Make : Prayag (ROCIO) Cat part No. 4255 wash down water closet pan (pedestal pattern) (EWC), Ivory including connections to drain (or outgoing pipe) and to flushing pipe, with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts anti-syphonage pipe including seat cover white etc. complete all as specified and directed.
S&F in repair under Counter One piece wash hand basin, Ivory Make : Prayag Cat Part No. 4790 fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed.
S & F in repair Vitreous China bowl urinal flat back ( 345x320x560) of Prayag with grating and union for discharge pipe, push tap including, CP Brass 2 way angle cock, CP urinal spraider of 15mm bore fancy types screwed down screwed for iron pipe or for brass ferrule, waste pipe etc complete all as specified and directed . (i) Make of Urinal : Prayag Cat No.: 4998 (SPECIAL ) or equivalent in Parryware /Cera/Johnson
M&L for granite (of any type) in full length for platform, including making ovel shape for WHB etc, shelves and gate pillar 20 mm thick machine cut bedded and jointed with grey cement sluury and pointed with white cement with admixture of pigment to match the shade over 20 mm thick screed bed (1:6) including grinding and polishing complete all as directed.
Taking down 15 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed.
Taking down 20 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as directed and specified by Engineer-in-Charge.
S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and as directed.
S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no.) suitable handle (1 no) complete all as specified
S&F in repair 3mm thick firured glass, pin headed type and glazing with oil putty in squares n. exc 0.5 sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge.
S&F but hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size in toilet with PVC doors etc complete all as specified and as directed.
S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete all as specified and as directed.
S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed.
Dismantling/demolition of existing water tanks of steel /PVC/RCC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified and as directed.
S&F in repair 15 mm bore bib Cock long Nose with wall Flange chromium plated fancy type, cast copper alloy with Make ; Prayag (Cat No. 9306) screwed down screwed for iron pipe or for unions and fixed 15 mm bore etc complete all as specified and as directed.
S & F pillar taps, Sink Mixture (Hot & Cold) with regular spout W/M Make : Prayag (Cat No. 9355) screwed for iron pipe complete all as specified and as directed.
S&F in repair towel rail (Cat No. BA-01) Make : Prayag - fixed to wall complete all as specified.
S&F in repair Soap dish with glass (Cat No. BA-15G) Make : Prayag, fixed to wall complete all as specified.
S&F in repair Toilet Paper Holder (Cat No. BA-38) Make Prayag fixed to wall complete all as specified.
S&F for CP Jet Sprey with 1.00M long CP flexible tube complete all as specified and directed.
Supply and fix as in replacement health faucet with 1 Mtr Tube & Hook Cat No. BEA-81, Make : Prayag - complete all as specified and as directed by Engineer-in-Charge.
S & F in repair suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips etc as per manufacture instructions & complete including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
S&F Powder coated anodised aluminium frame for door or window using section size minimum 100mm x 44 mm x 1.60 mm thick fixed in position with the help of steel screws and patent rawl plug etc complete and as directed .
S&F Powder coated aluminium window /ventilator glazed shutter with glazing bar , single panel etc complete fixed type with section having weight n less than 0.55 kg/RM and glazing with 5 mm thick plain glass including jointing cleats, glazing clips, suitable rubber packing, powder coated aluminium anodised snap beading, screws etc complete all as specified and directed. Note- The cost of tinted glass shall deemed to be included in unit rate .
Formwork to chullah hoods, chajjas, troughs and similar items including edges in flat rough finished surface of concrete complete all as specified and as directed.
M&L TMT bars 8 mm dia cut to length, bent to shape required incl cranking, bending spirally for hopping for columns hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate)as in sub base of floor complete all as specified and as directed
M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces over roof complete all as specified and directed.
S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed.
Taking down carefully unserviceable aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, lamp holders, sockets, fan regulators, wooden terminal box plastic laminated sheet cover from TW battens including TW batten or drawing from existing conduit removing including TW batten all as specified and as directed by Engr-in-Charge.
Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.
Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.
M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed .
Description same as per item No 157 above but one fan point controlled by one switch & regulator.
Description same as per item No 157 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.
Description same as per item No 157 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.
Description all as per item No 157 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.
S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.
S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.
S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.
S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.
S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.
S & F Sheet metal enclosure double door concealed suitable for distribution board when MCB to be used having 100 Amp rated bus bar 8 ways 240 volts complete all as specified and as directed.
S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , 'C' series, connected with copper lugs complete all as specified and as directed.
S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series, connected with copper lugs complete all as specified and as directed.
M&L for fine and clean sand free from sharp materials in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed by Engr–in– Charge. Note:- The total thickness of sand shall be measured 18 cm after punning and punned thickness will be considered for payment.
S & F Sheet metal enclosure double door concealed suitable for distribution board when MCB to be used having 100 Amp rated bus bar 4 ways 240 volts complete all as specified and as directed.
Supplying and laying precast concrete Cable cover class LV type-I for cable protection, size 250 x150 x 40 mm, laid flat ie length of cable cover shall be laid across the cable, complete all as specified and directed
S&F 1100 Volts grade heavy duty, ISI maked cable PVC insulated stranded aluminium conductor wire one twin core cable flat or circular of size 6 Sqmm to be connected to exiting MCB box/Main switches complete all as specified and directed.
Supply and fixing new desert cooler, heavy duty, electric driven fabricated with 18 gauge GI sheet including vertical support structure of 20x5mm angle iron, top and bottom water tank of 18 gauge GI sheet having diamention 85cmx60cmx15cm inside duly painted with double coats rubber paint and overall size with bottom tank and motor body part not less than 85cmx60cmx110cm when fixed with tank and MS wire net with grass wool pads, with air flow of minimum 5000 Cum/Hrs complete with submersible type water pump of suitable capacity, main fan motor (Exhaust fan type) with mild steel fan blade of exhaust fan type motor 450mm sweep with copper winding, duly protected from front side, switch control panel with seperate control for fan and water pump, 230 Volts 50 Hz, AC single phase including all necessary fitting such as double diversion grill and grill box suitable for 450mm sweep fan having 1400 RPM including 4 way PVC distributor, PVC pipe 1 to 2mtrs for spray water, wool pad, electrical wiring for fan and pump, controlled seperatly with 15Amps piano type switch including connection cable of 3 meters length three core sheathed power cable of size 1.5 Sqmm and plug top etc complete all as specified and directed. Note: (i) The design of complete desert cooler has to be approved before ordering full qty by GE. (ii) The angle iron and wire net to be painted with synthetic enamel paint over a coat of red oxide primer. GI sheet of water tank wii be painted with double coat of anti rusting rubber paint inside.
Supply and fixing in repair 28W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge.
Supply and fix M S body exhaust fans, copper wound, AC single phase 230/240V of size 300 mm sweep, 1400 RPM with louvre complete including with all arrangement of making holes on wall, making good and finishing of disturbed surfaces matching with the existing surfaces, necessary fixing arrangement such as fastener bolts, nuts, washers etc, of appropriate size all as specified and as directed.
Supply,laying connecting and testing in replacement of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with multi stranded aluminium conductor of size 10 sqmm 2 core as per IS 7092 Pt-I complete all as specified and as directed.
S & F delux Fan Regulator electronic rotary, step type 240 Volt 50 Hz, complete all as specified as directed.
S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed
S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx 'B' to PS .
M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into conduit (Existing / new) including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and as directed Note:- (a) Two runs of 6 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) New conduit and conduit accossories shall be measured separately.
S & F regid non-metallic PVC conduit not less than 20 dia (external) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and as directed
M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into conduit (Existing / new) including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and as directed Note:- (a) Two runs of 6 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) New conduit and conduit accossories shall be measured separately.
S&F Ceiling fan copper wound, 1200mm sweep, BEE star rating,AC single phase 230 V including all arrangement like hook,pipe of suitable size complete all as specified and directed.
S&F LED security/street light fittings1x35W LED 5700K energy saving and envoiremental frendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 luminaire with high power LED as light siurce and electronic driver suitable for pole dia 40mm including 40mm dia light grade tube bracket, bend to shape 1.80m long with two numbers clamp of size 50mmx6mm with nuts, bolts, washers etc including connection with 1.5Sqmm two single core PVC insulated and PVC sheathed cable stranded copper conductor upto ceiling rose and fixing on wall /pole complete as ditrected by Engineer in Charge. Make: Bajaj Cat Part No BRLEP20WLEDWH or equivalent make as specified in Appendix B to particular specification.
M&L brick work with fly ash brick (FASB) confirming to IS 12894 of strength M-10 straight or curved on plan exc 6 m mean radius built motar 1:4 complete all as specified and as directed.
M&L rendering 15 mm thick in cement mortar 1:6 on surface fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
Shree Jee Associates
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .