EI work

Average run 11 mtr

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed. Average run 10 mtr

Average run 11 mtr

on board

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC(TPNDB to SPNDB)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 2X25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (6-16 A) & 32A SPMCB (Make Legrand/Schneider/ABB itus)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall incl. making earthing attachment, and mending good damages as per GS.

i)150 mm x 100 mm x 65 mm

iii)200 mm x 150 mm x 65 mm

iii)240 mm x 200mm x 65 mm

Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws

i)150 mm x 100 mm x 65 mm

ii)200 mm x 150 mm x 65 mm

iii)240 mm x 200 mm x 65 mm

Before the repairing works by pwd Civil, the existing computer/power Boards are dismantled by skilled electrician and store in lock and key room as per direction of Junior Engineer and after civil works completed, The physically and electrically good condition computer and power boards are reinstalled at new location with necy screw incl. internal connection (where authority wants), the whole work will be executed as per direction of EIC.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Before the repairing works by pwd Civil, carefully taken down all good condition ceiling fans from existing location by skilled electrician and store in lock and key room as per direction of Junior Engineer and after civil works completed, The physically and electrically good condition ,light weight fans are reinstalled at new location after civil work compeltion, all necessary works like split pin, jam nuts and rubber bobin incl. S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. etc may be replaced as per requirments and over all works should be executed as per direction of EIC

Before the repairing works by pwd Civil, good condition LED fittings and tubes are taken down by skilled electrician and store in lock and key room as per direction of Junior Engineer and after civil works completed then reinstalled at the existing location complete with all accessories directly on wall/ceiling by screws etc., the whole work will be executed as per direction of EIC.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply and Fixing 2'' Aluminium Floor channel as per Requirment