Refurbishment work of storage room near at RTPCR Lab in H.B.T. Medical College, vile parle (W).

Amount

Electrical Work

1st category Cu armoured cables FRLS outer sheathed- 4C x 25 Sq.mm

1st category Cu armoured cables FRLSZ outer sheathed- 2C x 4Sq.mm

Cable End Termination For Copper Cables – 4C x 25 Sq.mm

Cable End Termination For Copper Cables – 2C x 1.5 / 2.5Sq.mm

Earthing Continuity Conductors -25 x 3mm GI

IP 43 Vertical TPN Distribution Board with Modular Incomer with Metal door (Box only) 6 Way (MCCB + 18 way)

IP 42 Wall/column Mounted distribution board with one Nos of DP 16/32A MCB as incomer and 6 Noss 6A/10A SP MCB as outgoing (12 way SPN DB)

ELCB with 100 mA sensitivity 100 A , 4 pole

125A 4P MCCB

63A TPN MCB

32A DP MCB

ELCB with 100mA Sensitivity 40Amp. 2Pole

Light /Fan / Ex. fan Points

15 / 5 A / 6 A Combined Power Plug Socket Point with Fuse and Indicating Lamp, One 15 Amp SP Switch

Submains FRLSH Casing N Caping - 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire in 20 x 12 mm (1/2 in)

INDOOR LED FIXTURES - -LED Square Recessed Downlighter- 45W (600x600)

Exhaust fan of 450mm sweep, 1400RPM, with 3650 CFM free air delivery, AC 415V , 50 Hz, Three phase complete with all necessary accessories for completing installation

Outdoor LED Street Light fittings – 48-60 W

Single arm bracket

Supply, Installation,Testing & Commissioning of IP Domecamera with 1/2.8" CMOS, Progressive Scan, HD 720P Horizontal Resolution, Dual H.264 streaming, 25 FPS, 2.8mm- 10mm varifocal auto iris lens, 0.01 lux,Tamper detection, Wide dynamic Range, 3D Noise reduction, PoE & standard 12VDC /24VAC power input, Indoor surface mount enclosure, Mounted on True Ceiling / False ceiling as per site requirement (including required accessories), UL Listed Or Equivalent. Camera Shall be ONVIF compliant.

Supply, Installation,Testing & Commissioning of IP Fixed Box/ Bullet camera with 1/2.8" CMOS, Progressive Scan, Day/Night, HD720P Horizontal Resolution , Dual H.264 streaming, 25 FPS, 2.8mm-10mm varifocal auto iris IRcorrected megapixel lens, 0.05 lux Day/Night, Tamper detection, Wide dynamic Range, 3D Noise reduction, PoE & standard 12VDC /24VAC power input, IP66 rated vandal resistant enclosure, UL Listed Or Equivalent. Camera Shall be ONVIF compliant.

SITC of 6TB Storage (HDD)

SITC of 8 ports 10/100/1000 with 2 combo ports PoE switch with installation

SITC of 9 inch Rack

3 Feet Patch Chord

Cat 6 Gigabyte

32 Inch LED Monitor

Standard Industrial type Fly killer with M.S. body, 4 X 20W tube and approx. area covered: 2000 sq.ft.

25 mm.- Only PVC Conduits

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 9 kg capacity with necessary clamp for erection on Wall.

50mm x 50mm x 50mm size GI Junction box with kNosck out & 10Amp. Connector block /strip

SITC of 8 Channel NVR Recording: 1920X1080P, 15 FPS, 30 days recording, 24 hours/day; Real time monitoring with 25 FPS. Hard disc : 8 SATA III Ports, Each 6TB , up to 48TB, 1 eSATA port, Disk array: Support RAID 0/1/5/6/10, Two no’s of RJ -45 10/100 /1000 Mbps self adaptive Ethernet interface, RS 232, RS 485, keyboard interfaces, VGA/ HDMI compatible, 2nos front USB 2.0 & 1 no at rear USB 2.0 compatible & 8 TB hard disc and as per storage configuration contractor shall consider the separate hard discs

Verical type metal fabricated Enclosure Box for 125A TPN MCCB

SITC of kitchen Exhaust hood, suction capacity : 1200CMH and duct fabrication

Civil Work

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying synthetic enamel paint or flat oil paint in any requiered shade in 3 coats over a primer coat as per manufacturers specifications including scrapping, cleaning the surface etc. Complete.

Providing and applying 6 mm thick internal ceiling plaster in cement mortar 1:3 with neeru finish at all heights and locations in single coat for concrete surfaces including scaffolding, hacking of concrete surface, watering, finishing, curing etc. complete.

Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint of an approved make and colour as per manufacturers specifications to surfacesspecifird below, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge.

Providing, detailing, fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as perspecifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing

Providing and fixing single skin trapezoidal profiled sheeting 930 - 1020mm cover width 28-32 mm crests depth at 186-250 c/c ( above 195 mm c/c crest distance there will be minimum 2 ribs at the centre for stiffening). The feed material shall be manufactured from AZ 150 (min. 150 gms/sq.mt total on both sides) Zincalume / Galvalume - Bare Galvalume/zincalume sheets for roofing

Providing and Fixing ARMSTRONG or Equivalent METAL FALSE CEILING with 0.5mm thick STANDARD PERFORATED METAL CLIP in tiles 600 mm x 600 mm to be suspended from slab with 2.5mm G.I. wire as per Manufacturers specification as directed by Engineer in Charge etc complete

Providing and fixing in position Curtain rod of aluminium powder coated circular tubular section including the fixing sockets on both sides.

Stitching of Curtains for windows and doors and fixing the same with approved fabric and buttons, accessories, etc complete

Excavation by using splitters for foundations, substructures, basements, tanks, sumps, walls, chambers, manholes, trenches, poles, pits & general building works in hard rock, reinforced concrete, for depths/lifts upto 1.5M, including drilling, breaking in small pieces, mucking, dressing/trimming the sides, leveling of bottoms, manual dewatering, removing rank vegetation, backfilling in layers not more than 200mm thickness, watering, consolidating, compacting to achieve not less then 97% Modified Proctor density conforming to relevant IS, stacking in measurable heaps for future use within owners space or disposing within an initial lead of 150m as directed by Engineer-in-Charge, loading, unloading, leveling excluding shoring, strutting etc.

Nominal Mix of 1:1:2 (1 cement OPC: 1 coarse sand : 2 graded stone aggregate 20 mm nominal size)

Providing and fixing 20mm to 25 mm thk. polished jet black granite stone plaque for inauguration of approved quality including preparing the surface and levelling in the desired line, cement float, machine cutting, leveling, jointing, filling the joints with neat cement, finishing, curing etc complete as directed by Engineer In Charge.

GATE VALVES (SCREWED):-25 mm dia.

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Kitchen sink -610x510 mm bowl depth 200mm

Providing and fixing brass CP angle cock for mini geyser of Metro,seiko or other equivalent approved make.

Providing and fixing JAQUAR MAKE, PRESSMATIC Taps Model No. 031 Pillarcock Auto closing system etc complete

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm dia nominal bore

Provding and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia

Providing and fixing 40mm thick Phenol Bonded solid core flush door shutters for sliding or 'Sliding and folding' door,commercial type hot pressed with 3mm thick veneer on both faces as per design conforming to IS:2202- 1991 (Part I & II) with 3 coats of French polishing, with 12mm thick T.W. lipping all around as per detailed specifications including sliding and folding door system - 30mm thick shutter

3 Seater yable with chair back support(SS304)

SHREE HERAMB CORPORATION (BID ID -6622077)