Zebra Crossings

Providing and fixing Caution/Warning sign boards size 600 mm equilateral Triangle made out of Type-XI of ASTMD 4956-09 wide anglecube cornered micro prismatic Retro reflective sheeting and conforming to IRC 67:2012 for full background of white colour andletter/logos done by screen printing in black color boarders by screen printing in Red colur and fixed over 3MM alluminium compositeMaterial (ACM) sheet having minimum 0.30mm thick Alluminium skin on both sides with back side painted grey colour and fixed overback support frame of MS angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size75x75x6mm with clear height of not less than 2.1m from the ground level the bottom of the board. The signpost should be painted withone coat of red oxide paint and 2 coats of synthetic enamel paint black and white colour with bands of 30cm of height. The signpostshall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M15 concrete foundation of size 450x450x600mm includingall cost and conveyance of all materials equipment, machinery and labour with all leads and lift loading charges necessary forsatisfactory completion of the work as directed by Engineer-in-charge

Providing and fixing mandatory/ informatory board size 600x800 mm made out of Type-XI of ASTMD 4956-09 wide angle cube cornered micro prismatic Retro reflective sheeting and conforming to IRC 67:2012 for full background of Green colour & white letters and fixed over 3MM alluminium composite Material sheet having minimum 0.30mm thick Alluminium skin on both sides with back side painted grey colour and fixed over back support frame of MS angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1m from the ground level to the bottom of the board.signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and white colour with bands of30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M15 concrete foundation of size450x450x600mm including cost and conveyance of all materials equipment, machinery and labour with all leads and lift loading chargesnecessary for satisfactory completion of the work as directed by Engineer-in-charge

Supplying and application of hot applied thermoplastic road marking compound 2.5mm thick including reflectorising glass beads @ 250 gms with Reflectorising Glass Beads on Bituminous Surface at 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass bead as per MORTH section 803.4 and IRC 35-2015,

Supply & Fixing of Molded Shanks Raised Pavement Markers made of plastic body moulded from HIPS(High impact polysterene) or ABSor ASA(Acrylic Strene Acrylonitrite and Reflective Panels with micro prismatic lens capable of providing total internal reflection of lightentering the lens face and shall suupport a load of 13635 kg tested in accordance to ASTM D 4280 Type H and complying toSpecifications of Category-A of MORTH Circular no. RW/NH/33023/10-97-DO III Dt. 11-06-1997.The height and width shall not exceed20mm, 130mm with minimum reflective area of 13 sq.cm on each side and the slope to the base shall be 35+/- 5 degrees.The strengthof detatchment of the integrated Cylindrical Shanks,(of Diameter not less than 19+/- 2 mm and Height not less than 30+/- 2 mm) fromthe body is to be a minimum value of 700 kg.Fixing will be by drilling Holes on the road from thee twin shanks, without nails and usingepoxy resine based adhesive as per manufacturers reccomendations and complete as directed by The Engineer.( Lane Marking)

Supply and delivery of precast cement concrete blocks of length 0.6m for kerbing grade M 30 using 20 mm and 6mm Graded Metal with rubber mould finish including transportation charges ,all taxes labour,centering,handling, curing for 21 days vibrating charges,etc compblete for finished item fixing in CM(1:3) (as per Quotation)

Fixing of precast cement concrete blocks of length 0.6m for kerbing grade M 30including all cost and conveyance charges (as per Quotation)

Supply and placing of Ready Mix Concrete M 10 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete.(RMC-M10) Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used.2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design.

Flooring with chequrred terrazzo tiles of 20 mm thick (All shades) set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Painting with Synthetic Enamel paints - Two Coat -(Synthetic Enamel paints in all shades Grade - I Asian/ Berger/ Nerolac / Indocem/ PMCC/ ESSAR or equivalent)

Providing artistic painting for road safety awareness including all charges etc complete